Régler les marges pour imprimante HP

Questions concernant les composants
Roby12
Messages : 123
Enregistré le : dim. 2 juil. 2017 17:57
Localisation : Près de RODEZ

Re: Régler les marges pour imprimante HP

Message par Roby12 »

Dernier message de la page précédente :

Pour Zebulon, Mpat, Arghlub, ...
Bonjour à tous...
Je reviens sur ce sujet car je n'aime pas rester sur un échec...
En m'appuyant sur la documentation : https://doc.ubuntu-fr.org/hplip" onclick="window.open(this.href);return false;
Paragraphe 3 → Installation via hp-setup
Voici ce que j'ai fait sous Ubuntu 16.04 pour le réglage minimum des marges
Connecter l’imprimante via le câble USB
Ouvrir un Terminal
Écrire hp-setup → Valider (La fenêtre Device Discovery s’ouvre)
Cocher Universal Serial Bus (USB)
Clic sur → Show Advanced Options
Type : All-In-One→ Next
L’imprimante HP Photosmart 5520 s’affiche → Next
Clic sur Add Printer (L’imprimante est ajoutée)
Fermer le Terminal

Dans la zone de recherche écrire Imp
Clic sur l’icône Imprimantes
Clic droit sur Photosmart_5520
- Activée
- Partagée
- Définir par défaut
Clic sur → Valider
Fermer la fenêtre Imprimantes

Imprimer une feuille avec les marges  :
-Gauche : 1.50cm
-Droite : 0.50cm
-Haute : 0.68cm
-Basse : 0.81cm


Maintenant ma question :
Comment faire sous Linux Mint pour lancer à l'aide d'un Terminal le programme hp-setup ?
Merci d'avance pour votre aide...
PC de bureau Compaq - Linux Mint Cinnamon 64 bits - 19.1 (Tessa) - Noyau 4.4.0-53-generic - Processeur Intel celeron CPU G540T 2.1GHz x 2 - Mémoire vive 3.7Go - DD 573.6Go - Carte graphique Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller - Imprimante HP ENVY 5545
En multi boot avec Windows 10

Avatar du membre
arghlub
Administrateur du site
Messages : 10421
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Régler les marges pour imprimante HP

Message par arghlub »

Salut Roby12 ;)
Roby12 a écrit : Comment faire sous Linux Mint pour lancer à l'aide d'un Terminal le programme hp-setup ?
Euh ben ....

Code : Tout sélectionner

hp-setup
Image
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────

Roby12
Messages : 123
Enregistré le : dim. 2 juil. 2017 17:57
Localisation : Près de RODEZ

Re: Régler les marges pour imprimante HP

Message par Roby12 »

Bonjour Arghlub...
C'est ce que je me suis évertué à faire plusieurs fois mais ça ne marche pas
Voir ci-dessous :

Code : Tout sélectionner

roby@roby-CQ2800EF ~ $ hp-setup
Le programme « hp-setup » n'est pas encore installé. Vous pouvez l'installer en tapant :
sudo apt install hplip
roby@roby-CQ2800EF ~ $ sudo apt install hplip
[sudo] Mot de passe de roby : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
hplip is already the newest version (3.16.3+repack0-1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 30 non mis à jour.
1 partiellement installés ou enlevés.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Paramétrage de grub-efi-amd64-signed (1.66.12+2.02~beta2-36ubuntu3.12) ...
grub-install.real : erreur : /usr/lib/grub/i386-pc/modinfo.sh n'existe pas. Veuillez utiliser --target ou --directory.
dpkg: erreur de traitement du paquet grub-efi-amd64-signed (--configure) :
 le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
Des erreurs ont été rencontrées pendant l'exécution :
 grub-efi-amd64-signed
E: Sub-process /usr/bin/dpkg returned an error code (1)
roby@roby-CQ2800EF ~ $ hp-setup
Le programme « hp-setup » n'est pas encore installé. Vous pouvez l'installer en tapant :
sudo apt install hplip
roby@roby-CQ2800EF ~ $ 



Je ne sais pas quoi faire de plus
PC de bureau Compaq - Linux Mint Cinnamon 64 bits - 19.1 (Tessa) - Noyau 4.4.0-53-generic - Processeur Intel celeron CPU G540T 2.1GHz x 2 - Mémoire vive 3.7Go - DD 573.6Go - Carte graphique Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller - Imprimante HP ENVY 5545
En multi boot avec Windows 10

Avatar du membre
arghlub
Administrateur du site
Messages : 10421
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Régler les marges pour imprimante HP

Message par arghlub »

Essaie peut-être de le réinstaller en le téléchargeant et en lançant le script d'installation :
Suis les instructions ici : http://hplipopensource.com/hplip-web/in ... index.html
;)
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────

Roby12
Messages : 123
Enregistré le : dim. 2 juil. 2017 17:57
Localisation : Près de RODEZ

Re: Régler les marges pour imprimante HP

Message par Roby12 »

J'ai suivi ton conseil mais j'avais fait ceci plusieurs fois déjà
Le résultat ci dessous et rien ne s'est amélioré :
J'ai répondu plusieurs fois YES
Puis j'ai essayé le NO
Maintenant je suis à cours d'idées

Code : Tout sélectionner

roby@roby-CQ2800EF ~ $ sh '/home/roby/Bureau/hplip-3.17.7.run' 
Creating directory hplip-3.17.7
Verifying archive integrity... All good.
Uncompressing HPLIP 3.17.7 Self Extracting Archive......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

HP Linux Imaging and Printing System (ver. 3.17.7)
HPLIP Installer ver. 5.1

Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Tue-22-Aug-2017_10:51:23.log

/
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.
 

INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a

Initializing. Please wait...


INTRODUCTION
------------
This installer will install HPLIP version 3.17.7 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Linux Mint 18.1.

Is "Linux Mint 18.1" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y


ENTER USER PASSWORD
-------------------
Please enter the sudoer (roby)'s password: 
 

INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu for more information.  Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the drive.

Please read the installation notes. Press <enter> to continue or 'q' to quit: 


SECURITY PACKAGES
-----------------
AppArmor is installed. 
AppArmor protects the application from external intrusion attempts making the application secure

Would you like to have this installer install the hplip specific policy/profile (y=yes, n=no*, q=quit) ? y


RUNNING PRE-INSTALL COMMANDS
----------------------------
OK


MISSING DEPENDENCIES
--------------------
Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some of the HPLIP features will not work if OPTIONAL dependencies are not installed.
Package-Name         Component            Required/Optional   
libcrypto            network              REQUIRED            
libnetsnmp-devel     network              REQUIRED            
sane-devel           scan                 REQUIRED            
cups-devel           base                 REQUIRED            
libusb               base                 REQUIRED            
libtool              base                 REQUIRED            
cups-image           base                 REQUIRED            
xsane                scan                 OPTIONAL            
libjpeg              base                 REQUIRED            
dbus                 fax                  REQUIRED            
Do you want to install these missing dependencies (y=yes*, n=no, q=quit) ? y


INSTALL MISSING REQUIRED DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency: cups-devel (CUPS devel- Common Unix Printing System development files)
warning: Missing REQUIRED dependency: libusb (libusb - USB library)
warning: Missing REQUIRED dependency: libtool (libtool - Library building support services)
warning: Missing REQUIRED dependency: cups-image (CUPS image - CUPS image development files)
warning: Missing REQUIRED dependency: libjpeg (libjpeg - JPEG library)
warning: Missing REQUIRED dependency: libcrypto (libcrypto - OpenSSL cryptographic library)
warning: Missing REQUIRED dependency: libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)
warning: Missing REQUIRED dependency: dbus (DBus - Message bus system)
warning: Missing REQUIRED dependency: sane-devel (SANE - Scanning library development files)


INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
note: Installation of dependencies requires an active internet connection.
warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)


CHECKING FOR NETWORK CONNECTION
-------------------------------
Network connection present.


RUNNING PRE-PACKAGE COMMANDS
----------------------------
warning: An error occurred running 'sudo dpkg --configure -a'
sudo dpkg --configure -a (Pre-depend step 1)
warning: An error occurred running 'sudo apt-get install --yes --force-yes -f'
sudo apt-get install --yes --force-yes -f (Pre-depend step 2)
warning: An error occurred running 'sudo apt-get update'
sudo apt-get update (Pre-depend step 3)
OK


DEPENDENCY AND CONFLICT RESOLUTION
----------------------------------
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #1...
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #2...
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #3...
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? y
Running 'sudo apt-get install --assume-yes libcups2-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? n
warning: Some HPLIP functionality might not function due to missing package(s).
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
error: Command failed. Re-try #1...
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
error: Command failed. Re-try #2...
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
error: Command failed. Re-try #3...
Running 'sudo apt-get install --assume-yes cups-bsd'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? n
warning: Some HPLIP functionality might not function due to missing package(s).
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
error: Command failed. Re-try #1...
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
error: Command failed. Re-try #2...
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
error: Command failed. Re-try #3...
Running 'sudo apt-get install --assume-yes cups-client'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? n
warning: Some HPLIP functionality might not function due to missing package(s).
Running 'sudo apt-get install --assume-yes libusb-1.0.0-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #1...
Running 'sudo apt-get install --assume-yes libusb-1.0.0-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #2...
Running 'sudo apt-get install --assume-yes libusb-1.0.0-dev'
Please wait, this may take several minutes...
error: Command failed. Re-try #3...
Running 'sudo apt-get install --assume-yes libusb-1.0.0-dev'
Please wait, this may take several minutes...
error: Package install command failed with error code 100
Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ? q
roby@roby-CQ2800EF ~ $ hp-setup
Le programme « hp-setup » n'est pas encore installé. Vous pouvez l'installer en tapant :
sudo apt install hplip
roby@roby-CQ2800EF ~ $ sudo apt install hplip
[sudo] Mot de passe de roby : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
hplip is already the newest version (3.16.3+repack0-1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 32 non mis à jour.
1 partiellement installés ou enlevés.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Paramétrage de grub-efi-amd64-signed (1.66.12+2.02~beta2-36ubuntu3.12) ...
grub-install.real : erreur : /usr/lib/grub/i386-pc/modinfo.sh n'existe pas. Veuillez utiliser --target ou --directory.
dpkg: erreur de traitement du paquet grub-efi-amd64-signed (--configure) :
 le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
Des erreurs ont été rencontrées pendant l'exécution :
 grub-efi-amd64-signed
E: Sub-process /usr/bin/dpkg returned an error code (1)
roby@roby-CQ2800EF ~ $ hp-setup
Le programme « hp-setup » n'est pas encore installé. Vous pouvez l'installer en tapant :
sudo apt install hplip
roby@roby-CQ2800EF ~ $ 
PC de bureau Compaq - Linux Mint Cinnamon 64 bits - 19.1 (Tessa) - Noyau 4.4.0-53-generic - Processeur Intel celeron CPU G540T 2.1GHz x 2 - Mémoire vive 3.7Go - DD 573.6Go - Carte graphique Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller - Imprimante HP ENVY 5545
En multi boot avec Windows 10

Avatar du membre
arghlub
Administrateur du site
Messages : 10421
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Régler les marges pour imprimante HP

Message par arghlub »

Attends le retour de mpat, qui est plus spécialiste que moi dans la gestion des périphériques ;)
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────

Roby12
Messages : 123
Enregistré le : dim. 2 juil. 2017 17:57
Localisation : Près de RODEZ

Re: Régler les marges pour imprimante HP

Message par Roby12 »

OK Arghlub et merci pour ton aide...
C'est quand même bizarre que chez toi ça a l'air de fonctionner en affichant la première fenêtre du logiciel Device Discovery
PC de bureau Compaq - Linux Mint Cinnamon 64 bits - 19.1 (Tessa) - Noyau 4.4.0-53-generic - Processeur Intel celeron CPU G540T 2.1GHz x 2 - Mémoire vive 3.7Go - DD 573.6Go - Carte graphique Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller - Imprimante HP ENVY 5545
En multi boot avec Windows 10

Avatar du membre
mpat
Messages : 7845
Enregistré le : mar. 25 août 2015 21:12
Localisation : Belgique

Re: Régler les marges pour imprimante HP

Message par mpat »

sérieux broll chez toi !
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. Also be sure you are using the Ubuntu "Main" Repositories. See: https://help.ubuntu.com/community/Repositories/Ubuntu" onclick="window.open(this.href);return false; for more information. Disable the CD-ROM/DVD source if you do not have the Ubuntu installation media inserted in the driv

Code : Tout sélectionner

Paramétrage de grub-efi-amd64-signed (1.66.12+2.02~beta2-36ubuntu3.12) ...
grub-install.real : erreur : /usr/lib/grub/i386-pc/modinfo.sh n'existe pas. Veuillez utiliser --target ou --directory.
dpkg: erreur de traitement du paquet grub-efi-amd64-signed (--configure) :
 le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
Des erreurs ont été rencontrées pendant l'exécution :
 grub-efi-amd64-signed
bon on commence par

Code : Tout sélectionner

efibootmgr -v
et

Code : Tout sélectionner

ls -R /boot/efi
après tes réponses on verra mais j'ai une idée de ton broll ;)
Clevo P775DM3-G
I7 -7700k (quad-core (8 threads) 4.2-4.5 ghz
ram 64go DDR4
Nvidia gtx 1080 8go GDDR5X
2 x ssd 500go m.2 Samsung + 2 to ssd Samsung
Lmint 18.3 Cinnamon 64bit, kernel 4.13.0-45

Roby12
Messages : 123
Enregistré le : dim. 2 juil. 2017 17:57
Localisation : Près de RODEZ

Re: Régler les marges pour imprimante HP

Message par Roby12 »

Bonjour Mpat...
D'abord une question ; c'est quoi un "broll" ?
Ensuite voici le résultat des commandes :

Code : Tout sélectionner

roby@roby-CQ2800EF ~ $ efibootmgr -v
efibootmgr: EFI variables are not supported on this system.
roby@roby-CQ2800EF ~ $ ls -R /boot/efi
ls: impossible d'ouvrir le répertoire '/boot/efi': Permission non accordée
roby@roby-CQ2800EF ~ $ 
PC de bureau Compaq - Linux Mint Cinnamon 64 bits - 19.1 (Tessa) - Noyau 4.4.0-53-generic - Processeur Intel celeron CPU G540T 2.1GHz x 2 - Mémoire vive 3.7Go - DD 573.6Go - Carte graphique Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller - Imprimante HP ENVY 5545
En multi boot avec Windows 10

Avatar du membre
mpat
Messages : 7845
Enregistré le : mar. 25 août 2015 21:12
Localisation : Belgique

Re: Régler les marges pour imprimante HP

Message par mpat »

broll = bordel mais poliment :lol:

car j'ai l'impression que tu as installer en uefi sans l'activer dans le bios, et d'autres choses, mais une à la fois

Code : Tout sélectionner

sudo fdisk -l
Clevo P775DM3-G
I7 -7700k (quad-core (8 threads) 4.2-4.5 ghz
ram 64go DDR4
Nvidia gtx 1080 8go GDDR5X
2 x ssd 500go m.2 Samsung + 2 to ssd Samsung
Lmint 18.3 Cinnamon 64bit, kernel 4.13.0-45

Roby12
Messages : 123
Enregistré le : dim. 2 juil. 2017 17:57
Localisation : Près de RODEZ

Re: Régler les marges pour imprimante HP

Message par Roby12 »

Code : Tout sélectionner

roby@roby-CQ2800EF ~ $ sudo fdisk -l
[sudo] Mot de passe de roby : 
Disque /dev/ram0 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram1 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram2 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram3 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram4 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram5 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram6 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram7 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram8 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram9 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram10 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram11 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram12 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram13 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram14 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/ram15 : 64 MiB, 67108864 octets, 131072 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x21fa42d6

Périphérique Amorçage      Start        Fin   Secteurs   Size Id Type
/dev/sda1                   2048    1026047    1024000   500M  7 HPFS/NTFS/exFAT
/dev/sda2                1026048  308226047  307200000 146,5G  7 HPFS/NTFS/exFAT
/dev/sda3              308228094 1348237311 1040009218 495,9G  5 Étendue
/dev/sda5              308228096  316420095    8192000   3,9G 82 partition d'éch
/dev/sda6              316422144  828422143  512000000 244,1G 83 Linux
/dev/sda7              828424192 1340424191  512000000 244,1G 83 Linux
/dev/sda8    *        1340426240 1348237311    7811072   3,7G ef EFI (FAT-12/16/




Disque /dev/sdb : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00090de2

Périphérique Amorçage Start       Fin  Secteurs   Size Id Type
/dev/sdb2              2046 622641151 622639106 296,9G  5 Étendue
/dev/sdb5    *         4096 622639103 622635008 296,9G  7 HPFS/NTFS/exFAT
roby@roby-CQ2800EF ~ $ 
PC de bureau Compaq - Linux Mint Cinnamon 64 bits - 19.1 (Tessa) - Noyau 4.4.0-53-generic - Processeur Intel celeron CPU G540T 2.1GHz x 2 - Mémoire vive 3.7Go - DD 573.6Go - Carte graphique Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller - Imprimante HP ENVY 5545
En multi boot avec Windows 10

Répondre