Dernier message de la page précédente :
As tu relancé l'installation de Scangearmp2 après avoir installé la librairie manquante ? Il faut le faire.Scanner Canon TS6151
-
- Messages : 2219
- Enregistré le : jeu. 2 juin 2016 08:57
- Localisation : Hautes-Alpes: GAP
Re: Scanner Canon TS6151
PC1:PCportable HP Pavilion 15-eh3027nf, proc Ryzen 7 7730U , Ram 16 Go, SSD 512 Go, LM 21.3 XFCE Dual Boot W11/LM 21.3
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
Re: Scanner Canon TS6151
Oui oui cela a bien été fait !
CPU/GPU : Intel G4400
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
-
- Messages : 2219
- Enregistré le : jeu. 2 juin 2016 08:57
- Localisation : Hautes-Alpes: GAP
Re: Scanner Canon TS6151
qu'est-ce qui ne fonctionne pas? La détection du scanner lors de l'installation ou le lancement de scangearmp2 ensuite?
PC1:PCportable HP Pavilion 15-eh3027nf, proc Ryzen 7 7730U , Ram 16 Go, SSD 512 Go, LM 21.3 XFCE Dual Boot W11/LM 21.3
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
Re: Scanner Canon TS6151
Lors de l’installation il n'y a pas de recherche de scanner. Par contre une fois scangear2 installé, lorsque j'essaie de le lancer avec la commande "scangear2" le logiciel me dit qu'aucun scanner n'est détecté et si je fais une recherche de scanner, il cherche pendant 1-2 minutes puis me retourne le même message "pas de scanner détecté". Le scanner est bien en ligne, visible depuis un pc sous windows et la partie imprimante est fonctionnelle depuis mon pc sous LMDE.
CPU/GPU : Intel G4400
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
-
- Messages : 2219
- Enregistré le : jeu. 2 juin 2016 08:57
- Localisation : Hautes-Alpes: GAP
Re: Scanner Canon TS6151
C'est ça qui ne va pas! Lors de l'installation de Scangearmp2, le logiciel te permet de choisir si ton scanner est branché en USB ou en Wifi et ensuite il est détecté; il suffit alors de valider pour qu'il soit enregistré par le logiciel.Sty_X a écrit : ↑lun. 19 nov. 2018 16:03Lors de l’installation il n'y a pas de recherche de scanner. Par contre une fois scangear2 installé, lorsque j'essaie de le lancer avec la commande "scangear2" le logiciel me dit qu'aucun scanner n'est détecté et si je fais une recherche de scanner, il cherche pendant 1-2 minutes puis me retourne le même message "pas de scanner détecté". Le scanner est bien en ligne, visible depuis un pc sous windows et la partie imprimante est fonctionnelle depuis mon pc sous LMDE.
PC1:PCportable HP Pavilion 15-eh3027nf, proc Ryzen 7 7730U , Ram 16 Go, SSD 512 Go, LM 21.3 XFCE Dual Boot W11/LM 21.3
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
Re: Scanner Canon TS6151
Et bien oui mais là je ne vois pas trop comment faire car l’instillation se résume à installation d'un simple paquet (dont géré par l’installateur de paquet). Je clique sur le fichier .deb, l'installateur de paquet se lance puis voila...
Autre solution mais qui revient au même : si j’utilise le script d'installation "install.sh" fournit avec scangearn téléchargé sur le site de canon et que je le lance depuis un terminale il s’exécute en 2 secondes puis la fenêtre du terminale se ferme donc là aussi à aucun moment je ne peux intervenir pendant l'installation...
Autre solution mais qui revient au même : si j’utilise le script d'installation "install.sh" fournit avec scangearn téléchargé sur le site de canon et que je le lance depuis un terminale il s’exécute en 2 secondes puis la fenêtre du terminale se ferme donc là aussi à aucun moment je ne peux intervenir pendant l'installation...
CPU/GPU : Intel G4400
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
-
- Messages : 90
- Enregistré le : sam. 20 oct. 2018 00:07
Re: Scanner Canon TS6151
Bonjour,
Peut tu poster le contenu du fichier install.sh dans des balises code ? merci
edit :
J'ai trouver cela pour installer une imprimante qui n'est pas le même modèle que le tien mais il faut l'adapter
Lien original : https://forums.linuxmint.com/viewtopic.php?t=246120
Lien traduit : https://translate.google.fr/translate?s ... t=&act=url
Peut tu poster le contenu du fichier install.sh dans des balises code ? merci
edit :
J'ai trouver cela pour installer une imprimante qui n'est pas le même modèle que le tien mais il faut l'adapter
Lien original : https://forums.linuxmint.com/viewtopic.php?t=246120
Lien traduit : https://translate.google.fr/translate?s ... t=&act=url
Manjaro 18.00 KDE Desktop : Zsh Shell / Oh My Zsh - proco Pentium© Dual-Core CPU E6700 @ 3.20GHz × 2 - Ram 3 Go - HDD 333.6 Go - Carte graph Intel Corporation 82G33/G31 Express Integrated Graphics Controller
Re: Scanner Canon TS6151
Voila le contenu du script
Merci pour le lien mais il n'explique qu'une procédure classique : executer le install.sh sans rien de plus et ensuite lancer scangear2 et selectionner le scanner. Scanner qui n'apparait pas chez moi....
Code : Tout sélectionner
#!/bin/bash
##############################################################################
##
## ScanGear MP for Linux
## Copyright CANON INC. 2007-2017
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
##
##############################################################################
C_version="3.50-1"
C_copyright_end="2017"
C_default_system="deb"
L_INST_COM_01_01="Command executed = %s\n"
L_INST_COM_01_02="An error occurred. The package management system cannot be identified.\n"
L_INST_COM_01_03="An error occurred. A necessary package could not be found in the proper location.\n"
L_INST_COM_01_04="Installation has been completed.\n"
L_INST_COM_01_05="An error occurred. Your environment cannot be identified as 32-bit or 64-bit.\nTry to install again by using the following command.\n"
L_INST_COM_01_06="An error occurred. The specified environment differs from your environment.\nTry to install again by using the following command.\n"
L_INST_COM_02_01="Usage: %s\n"
L_INST_COM_02_02="Uninstallation has been completed.\n"
L_INST_COM_03_01="[Package]\n"
L_INST_SCN_00_01="ScanGear MP"
L_INST_SCN_00_02="Version %s"
L_INST_SCN_00_03="Copyright CANON INC. %s-%s"
C_main_module="scangearmp2"
C_copyright_start="2007"
#################################################################
#### C_function name define
#################################################################
C_function01="S_FUNC_show_inst_complete"
C_function02="S_FUNC_no_action"
C_function03="S_FUNC_show_copyright"
#################################################################
#### Show "install complete" message $1:L_INST_COM_01_04
#### C_function01
#################################################################
S_FUNC_show_inst_complete(){
printf "$1"
}
#################################################################
#### No action, case scanner
#### C_function02
#################################################################
S_FUNC_no_action(){
echo -n ""
}
#################################################################
#### Show the copyright $1:version $2:copyright_end
#### C_function03
#################################################################
S_FUNC_show_copyright()
{
# s_copyright1="ScanGear MP Ver.$1 for Linux"
# s_copyright2="Copyright CANON INC. 2007-2011"
# echo $s_copyright1; echo $s_copyright2; echo $s_copyright3
printf "$L_INST_SCN_00_01\n"
printf "$L_INST_SCN_00_02\n" $1
printf "$L_INST_SCN_00_03\n" $C_copyright_start $C_copyright_end
}
C_ERR_CODE="128"
C_big="50"
C_equal="40"
C_small="30"
C_common="common"
C_system=""
C_arch=""
C_arch32=""
C_arch64=""
C_err="no_error"
C_err_unknown="err_unknown"
C_err_mismatch="err_mismatch"
C_err_usage="err_usage"
C_install_script_fname="install.sh"
C_config_path_rpm="/usr/local/bin"
C_config_path_deb="/usr/bin"
C_copyrightb="=================================================="
C_arg_inst="[ --bit32 | --bit64 ]"
C_arg_pkg="[ --uninstall | --version ]"
C_FUNC_show_and_exec()
{
printf "$L_INST_COM_01_01" "$1"
$1
}
C_FUNC_version_comp()
{
local c_tmpstr=""
local c_ver1=""
local c_ver2=""
local c_rela1=""
local c_reln1=""
local c_rela2=""
local c_reln2=""
C_FUNC_makelist()
{
echo $1
echo $2
}
## version compare ##
# ex. 3.10->310, 1.30->130 #
c_tmpstr=`echo ${1%%-*}`
c_ver1=`echo ${c_tmpstr%%.*}``echo ${c_tmpstr##*.}`
c_tmpstr=`echo ${2%%-*}`
c_ver2=`echo ${c_tmpstr%%.*}``echo ${c_tmpstr##*.}`
# ex. 310 > 300 #
if [ "$c_ver1" -gt "$c_ver2" ]; then
return $C_big
elif [ "$c_ver1" -lt "$c_ver2" ]; then
return $C_small
fi
## release compare ##
# ex. a13->[a][13], 2->[][2] #
c_tmpstr=`echo ${1##*-}`
c_rela1=`echo ${c_tmpstr%%[0-9]*}`
c_reln1=`echo ${c_tmpstr##*[a-z]}`
c_tmpstr=`echo ${2##*-}`
c_rela2=`echo ${c_tmpstr%%[0-9]*}`
c_reln2=`echo ${c_tmpstr##*[a-z]}`
# ex. [a][13] < [][2] #
if [ -z "$c_rela1" ] && [ -n "$c_rela2" ]; then
return $C_big
elif [ -n "$c_rela1" ] && [ -z "$c_rela2" ]; then
return $C_small
fi
# ex. [a][2] < [b][1] #
if [ -n "$c_rela1" ] && [ "$c_rela1" != "$c_rela2" ]; then
list=`C_FUNC_makelist $c_rela1 $c_rela2 | sort`
for c_tmpstr in $list; do
if [ "$c_tmpstr" = "$c_rela1" ]; then
return $C_small
else
return $C_big
fi
done
fi
# ex. [a][2] > [a][1], [b][9] < [b][10] #
if [ "$c_reln1" -gt "$c_reln2" ]; then
return $C_big
elif [ "$c_reln1" -lt "$c_reln2" ];then
return $C_small
else
return $C_equal
fi
}
C_FUNC_get_system()
{
local c_system_rpm=""
local c_system_deb=""
## Judge is the distribution supporting rpm? ##
rpm --version 1> /dev/null 2>&1
c_system_rpm=$?
## Judge is the distribution supporting dpkg(debian)? ##
dpkg --version 1> /dev/null 2>&1
c_system_deb=$?
## rpm error and deb error is error ##
if [ $c_system_rpm != 0 -a $c_system_deb != 0 ]; then
return $C_ERR_CODE
elif [ $c_system_rpm = 0 -a $c_system_deb = 0 ]; then
C_system=$C_default_system
else
if test $c_system_rpm -eq 0; then
C_system="rpm"
else
C_system="deb"
fi
fi
if [ $C_system = "rpm" ]; then
C_arch32="i386"
C_arch64="x86_64"
else
C_arch32="i386"
C_arch64="amd64"
fi
return 0
}
C_FUNC_get_bitconf()
{
local c_bit_conf=""
local c_sudo_command=""
local c_arg1=$1
if [ $C_system = "deb" ]; then
c_sudo_command="sudo "
fi
getconf LONG_BIT 1> /dev/null 2>&1
if [ $? -eq 0 ]; then
c_bit_conf=`getconf LONG_BIT`
else
c_bit_conf=""
fi
if [ -z $C_arch ]; then
# No argment and getconf=32|64 -> continue #
if [ -z $c_bit_conf ]; then
if [ -z $c_arg1 ]; then
C_err=$C_err_unknown
elif [ $c_arg1 = "version" ]; then
C_arch="*"
fi
elif [ $c_bit_conf = "32" ]; then
C_arch=$C_arch32
elif [ $c_bit_conf = "64" ]; then
C_arch=$C_arch64
else
C_err=$C_err_unknown
fi
else
if [ $C_arch = "32" ]; then
# --bit32 and getconf=error -> continue #
if [ -z $c_bit_conf ]; then
C_arch=$C_arch32
elif [ $c_bit_conf = "32" ]; then
C_arch=$C_arch32
else
C_err=$C_err_mismatch
fi
elif [ $C_arch = "64" ]; then
# --bit64 and getconf=error -> continue #
if [ -z $c_bit_conf ]; then
C_arch=$C_arch64
elif [ $c_bit_conf = "64" ]; then
C_arch=$C_arch64
else
C_err=$C_err_mismatch
fi
fi
fi
if [ $C_err = $C_err_mismatch ]; then
printf "$L_INST_COM_01_06"
printf "\n ${c_sudo_command}${0}\n\n"
return $C_ERR_CODE
elif [ $C_err = $C_err_unknown ]; then
printf "$L_INST_COM_01_05"
printf "\n ${c_sudo_command}${0} ${C_arg_inst}\n\n"
return $C_ERR_CODE
fi
return 0
}
C_FUNC_localize()
{
local lc_file_dir=$1
## Get current LANG information ##
local current_lang=`echo $LANG | tr '[:upper:]' '[:lower:]'`
## Get printer or scanner ##
local driver=""
if [ $C_main_module = "cnijfilter2" ]; then
driver="printer"
else
driver="scanner"
fi
## Get localize file name ##
local lc_file="nolocalize"
case "${current_lang##*.}" in
utf8 | utf-8)
case "${current_lang%%.*}" in
ja_jp)
lc_file="${driver}_ja_utf8.lc"
;;
fr_fr)
lc_file="${driver}_fr_utf8.lc"
;;
zh_cn)
lc_file="${driver}_zh_utf8.lc"
;;
esac
;;
esac
## Set localize file ##
if [ $lc_file != "nolocalize" ]; then
if [ -f ${lc_file_dir}/${lc_file} ]; then
source ${lc_file_dir}/${lc_file}
fi
fi
return 0
}
######################################################
#### _ _ E x e c u t e _ I n s t a l l . s h _ _ ####
######################################################
if [ ${0##*/} = $C_install_script_fname ]; then
#################################################################
#### _ _ B o t h _ P a c k a g e _ C o m m o n _ F l o w _ _ ####
#################################################################
C_argment=$1
################
### Localize ###
################
C_local_path_inst="`echo $(dirname $0)`/resources"
C_FUNC_localize "$C_local_path_inst"
########################
## Show the copyright ##
########################
C_FUNC_get_system
if [ $? -eq 0 ]; then
if [ $C_system = "rpm" ]; then
## Check permission by root ##
if test `id -un` != "root"; then
su -c "$0 $*"
exit
fi
else
sudo echo > /dev/null
if [ $? -ne 0 ]; then
exit
fi
fi
fi
echo $C_copyrightb; echo
$C_function03 "${C_version%%-*}"
echo ; echo $C_copyrightb
#########################
### Check the argment ###
#########################
if [ $# -eq 1 ]; then
if [ $C_argment = "--bit32" ]; then
C_arch="32"
elif [ $C_argment = "--bit64" ]; then
C_arch="64"
else
C_err=$C_err_usage
fi
elif [ $# -ne 0 ]; then
C_err=$C_err_usage
fi
if [ $C_err = $C_err_usage ]; then
printf "$L_INST_COM_02_01" "${0##*/} $C_arg_inst"
exit
fi
#################################
### Judge distribution system ###
#################################
C_FUNC_get_system
if [ $? -ne 0 ]; then
printf "$L_INST_COM_01_02"
exit
fi
#########################
### Judge 32bit/64bit ###
#########################
C_FUNC_get_bitconf
if [ $? -ne 0 ]; then
exit
fi
############################
### Check file structure ###
############################
## Get full path of script and packages ##
C_pkg_path=`echo $(dirname $0)`/packages
if [ ! -d $C_pkg_path ]; then
printf "$L_INST_COM_01_03"
exit
fi
## Count total files and check the filename ##
C_file_cnt=0
C_files=$C_pkg_path/*${C_arch}*
for filename in $C_files; do
if [ $filename != $C_pkg_path ]; then
# Count number of C_files #
C_file_cnt=`expr $C_file_cnt + 1`
fi
done
## Check number of C_files ##
if [ $C_file_cnt -ne 1 ]; then
printf "$L_INST_COM_01_03"
exit
fi
## Recheck package names ##
C_pkgname_common=$C_main_module
if [ $C_system = "rpm" ]; then
C_fpath_common=$C_pkg_path/$C_pkgname_common-$C_version.$C_arch.$C_system
else
C_fpath_common=$C_pkg_path/${C_pkgname_common}_${C_version}_$C_arch.$C_system
fi
## Check having common and depend package files ##
if [ ! -f $C_fpath_common ]; then
printf "$L_INST_COM_01_03"
exit
fi
#####################################################################
#### _ _ P a c k a g e _ S y s t e m _ D e p e n d _ F l o w _ _ ####
#####################################################################
C_FUNC_rpm_install_process()
{
local c_fpath_pkg_name=$1
local c_pkg_name=$2
local c_exec_update=1
local c_installed_pkg=""
## result -> 0:Package installed, 1:Package not installed ##
c_installed_pkg=`rpm -q $c_pkg_name`
if [ $? -eq 0 ]; then
c_installed_pkg_ver=`echo ${c_installed_pkg##$c_pkg_name-}`
c_installed_pkg_ver=`echo ${c_installed_pkg_ver%%.$C_arch32}`
c_installed_pkg_ver=`echo ${c_installed_pkg_ver%%.$C_arch64}`
C_FUNC_version_comp $c_installed_pkg_ver $C_version
if [ $? -ne $C_small ]; then
c_exec_update=0
fi
fi
if [ $c_exec_update -eq 1 ]; then
C_FUNC_show_and_exec "rpm -Uvh $c_fpath_pkg_name"
if [ $? -ne 0 ]; then
return $C_ERR_CODE
fi
else
C_FUNC_show_and_exec "rpm --test -U $c_fpath_pkg_name"
fi
return 0
}
C_FUNC_deb_install_process()
{
local c_fpath_pkg_name=$1
## result -> 0:Install process complete, 1:Install process depend error ##
C_FUNC_show_and_exec "sudo dpkg -iG $c_fpath_pkg_name"
if [ $? != 0 ]; then
return $C_ERR_CODE
fi
return 0
}
## Make Package-config script, after Check Newer version config script is installed already ##
C_FUNC_make_pkgconfig()
{
local c_pkgconfig_fname=$1
local c_script_path=$2
local c_sudo_command=$3
local c_pkgconfig_fpath="$c_script_path/$c_pkgconfig_fname"
local c_config_path=""
if [ ! -d /usr ]; then
$c_sudo_command mkdir /usr
fi
if [ $2 = "rpm" ]; then
if [ ! -d /usr/local ]; then
mkdir /usr/local
fi
c_config_path=$C_config_path_rpm
else
c_config_path=$C_config_path_deb
fi
if [ ! -d $c_config_path ]; then
$c_sudo_command mkdir $c_config_path
fi
$c_sudo_command cp -af $(dirname $0)/$C_install_script_fname $c_pkgconfig_fpath
## Change file permission to same install.sh ##
$c_sudo_command chmod 755 $c_pkgconfig_fpath
$c_sudo_command chown root $c_pkgconfig_fpath
$c_sudo_command chgrp root $c_pkgconfig_fpath
}
## Copy Localize-file, after making pkeconfig script ##
C_FUNC_copy_lcfile()
{
local c_lcfile_srcpath=$1
local c_lcfile_dstname=$2
local c_sudo_command=$3
local c_lcfile_dstpath=""
if [ ! -d /usr ]; then
$c_sudo_command mkdir /usr
fi
if [ $C_system = "rpm" ]; then
if [ ! -d /usr/local ]; then
mkdir /usr/local
fi
if [ ! -d /usr/local/share ]; then
mkdir /usr/local/share
fi
c_lcfile_dstpath="/usr/local/share"
else
if [ ! -d /usr/share ]; then
$c_sudo_command mkdir /usr/share
fi
c_lcfile_dstpath="/usr/share"
fi
$c_sudo_command rm -rf $c_lcfile_dstpath/$c_lcfile_dstname
$c_sudo_command mkdir $c_lcfile_dstpath/$c_lcfile_dstname
$c_sudo_command cp -a $c_lcfile_srcpath/*.lc $c_lcfile_dstpath/$c_lcfile_dstname/
}
if [ $C_system = "rpm" ]; then
C_install_process="C_FUNC_rpm_install_process"
C_uninstall_command="rpm -e"
C_script_path=$C_config_path_rpm
C_sudo_command=""
else
C_install_process="C_FUNC_deb_install_process"
C_uninstall_command="sudo dpkg -P"
C_script_path=$C_config_path_deb
C_sudo_command="sudo"
fi
## Common-Package install process ##
$C_install_process $C_fpath_common $C_main_module
if [ $? -ne 0 ]; then
if [ $C_system = "deb" ]; then
C_FUNC_show_and_exec "$C_uninstall_command $C_pkgname_common"
fi
exit
fi
C_pkgconfig_fname=$C_main_module-pkgconfig.sh
C_pkgconfig_dname=${C_pkgconfig_fname%%\.sh}
$C_pkgconfig_fname --pkgconfig 1> /dev/null 2>&1
if [ $? -ne 0 ]; then
C_FUNC_make_pkgconfig $C_pkgconfig_fname $C_script_path $C_sudo_command
C_FUNC_copy_lcfile $C_local_path_inst $C_pkgconfig_dname $C_sudo_command
else
C_installed_config_ver=`$C_pkgconfig_fname --pkgconfig`
C_FUNC_version_comp $C_installed_config_ver $C_version
if [ $? -lt $C_equal ]; then
$C_sudo_command rm -rf $C_script_path/$C_pkgconfig_fname
C_FUNC_make_pkgconfig $C_pkgconfig_fname $C_script_path $C_sudo_command
C_FUNC_copy_lcfile $C_local_path_inst $C_pkgconfig_dname $C_sudo_command
fi
fi
$C_function01 "$L_INST_COM_01_04" "$C_system"
##########################################################
#### _ _ E x e c u t e _ P k g c o n f i g . s h _ _ ####
##########################################################
else
C_argment=$1
#################################
### Judge distribution system ###
#################################
C_FUNC_get_system
if [ $? -ne 0 ]; then
printf "$L_INST_COM_01_02"
exit
fi
################
### Localize ###
################
if [ $C_system = "rpm" ]; then
C_local_path_pkgconf="/usr/local/share/${C_main_module}-pkgconfig"
else
C_local_path_pkgconf="/usr/share/${C_main_module}-pkgconfig"
fi
C_FUNC_localize "$C_local_path_pkgconf"
## Check the argment ##
if [ $# -ne 1 ]; then
C_err=$C_err_usage
elif [ $C_argment != "--version" ] && [ $C_argment != "--uninstall" ] && [ $C_argment != "--pkgconfig" ]; then
C_err=$C_err_usage
fi
if [ $C_err = $C_err_usage ]; then
printf "$L_INST_COM_02_01" "${0##*/} $C_arg_pkg"
exit
fi
########################
### Unistall process ###
########################
if [ $C_argment = "--uninstall" ]; then
C_FUNC_rpm_uninstall_process()
{
rpm -q $1 1> /dev/null 2>&1
## result -> 0:Package installed, 1:Package not installed ##
if [ $? -eq 0 ]; then
# uninstall #
C_FUNC_show_and_exec "rpm -e $1"
## result -> 0:Uninstall complete, 1:Uninstall error by debendency ##
if [ $? -ne 0 ]; then
# Dependency error #
return $C_ERR_CODE
fi
fi
return 0
}
C_FUNC_deb_uninstall_process()
{
# uninstall #
C_FUNC_show_and_exec "sudo dpkg -P $1"
## result -> 0:Uninstall complete, 1:Uninstall error by debendency ##
if [ $? -ne 0 ]; then
# Dependency error #
return $C_ERR_CODE
fi
return 0
}
if [ $C_system = "rpm" ]; then
C_uninstall_process="C_FUNC_rpm_uninstall_process"
C_sudo_command=""
## Check permission by root ##
if test `id -un` != "root"; then
su -c "$0 $C_argment"
exit
fi
else
C_uninstall_process="C_FUNC_deb_uninstall_process"
C_sudo_command="sudo"
sudo echo > /dev/null
if [ $? -ne 0 ]; then
exit
fi
fi
$C_function02 "$C_system"
## Delete mine (pkgconfig.sh) ##
$C_sudo_command rm -rf $(dirname $0)/${0##*/}
C_pkgconfigsh=${0##*/}
C_pkgconfig=${C_pkgconfigsh%%\.sh}
if [ $C_system = "rpm" ]; then
C_lcfile_path="/usr/local/share/${C_pkgconfig}"
else
C_lcfile_path="/usr/share/${C_pkgconfig}"
fi
$C_sudo_command rm -rf $C_lcfile_path
## Uninstall Common-Package ##
$C_uninstall_process $C_main_module
printf "$L_INST_COM_02_02"
###############################
### Version display process ###
###############################
elif [ $C_argment = "--version" ]; then
#########################
### Judge 32bit/64bit ###
#########################
C_FUNC_get_bitconf version
if [ $? -eq $C_ERR_CODE ]; then
exit
fi
echo ; $C_function03 "${C_version%%-*}"
printf "\n$L_INST_COM_03_01"
if [ $C_system = "rpm" ]; then
echo $C_main_module-$C_version.$C_arch.$C_system
else
echo ${C_main_module}_${C_version}_$C_arch.$C_system
fi
echo
elif [ $C_argment = "--pkgconfig" ]; then
echo $C_version
fi
fi
CPU/GPU : Intel G4400
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
-
- Messages : 90
- Enregistré le : sam. 20 oct. 2018 00:07
Re: Scanner Canon TS6151
Tu exécute ce script en root ? ou en utilisateur simple ?
Manjaro 18.00 KDE Desktop : Zsh Shell / Oh My Zsh - proco Pentium© Dual-Core CPU E6700 @ 3.20GHz × 2 - Ram 3 Go - HDD 333.6 Go - Carte graph Intel Corporation 82G33/G31 Express Integrated Graphics Controller
Re: Scanner Canon TS6151
Oui oui en sudo
Après je me demande si je fais bien une désinstallation "propre" entre deux essaies d'installation : je vais juqte supprimer le paquet "scangearmp2" via le gestionnaire de paquet synaptic
Code : Tout sélectionner
sty_x@terminora_lmde:~/Bureau/scan$ sudo ./install.sh
[sudo] Mot de passe de sty_x :
==================================================
ScanGear MP
Version 3.50
Copyright CANON INC. 2007-2017
==================================================
Commande exécutée = sudo dpkg -iG ./packages/scangearmp2_3.50-1_amd64.deb
Sélection du paquet scangearmp2 précédemment désélectionné.
(Lecture de la base de données... 237157 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../scangearmp2_3.50-1_amd64.deb ...
Dépaquetage de scangearmp2 (3.50-1) ...
Paramétrage de scangearmp2 (3.50-1) ...
L'installation est terminée.
CPU/GPU : Intel G4400
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
CM : Asus H110i-Plus
RAM : 2x 4Go G.Skill Ripjaws V Red DDR4
Disque système : SSD Samsung Evo 860 250Go
Disque données : HDD WD 1To
OS : LMDE 4 64 bits - Cinnamon
-
- Messages : 2219
- Enregistré le : jeu. 2 juin 2016 08:57
- Localisation : Hautes-Alpes: GAP
Re: Scanner Canon TS6151
Et justement il ne faut pas l'exécuter en sudo le install.sh ! Si on le fait, soit on obtient un message disant qu'il n'existe pas, soit une install qui n'aboutit pas !
PC1:PCportable HP Pavilion 15-eh3027nf, proc Ryzen 7 7730U , Ram 16 Go, SSD 512 Go, LM 21.3 XFCE Dual Boot W11/LM 21.3
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1
PC2: PC portable Lenovo Ideapad 3 15ALC6 (82KU002GFR),proc Ryzen 7 5700, Ram 8Go, SSD 512 Go, LM 21.1 XFCE
Dual boot: Windows 11 Family/ Linuxmint 21.1