Ensuite si le wifi passe, as tu besoin réellement d'une connexion rj45 ?
Une solution serait de tester un kernel plus récent.
Vu que tu es sous LMDE tu peux activer les backports et installer un kernel de génération 5... Enfin à toi de voir.
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ
antonio@antonio:~/Téléchargements/e1000e-3.6.0/src$ sudo make install
[sudo] Mot de passe de antonio :
make[1] : on entre dans le répertoire « /usr/src/linux-headers-4.19.0-18-common »
make[2] : on entre dans le répertoire « /usr/src/linux-headers-4.19.0-18-amd64 »
CC [M] /home/antonio/Téléchargements/e1000e-3.6.0/src/netdev.o
In file included from /home/antonio/Téléchargements/e1000e-3.6.0/src/e1000.h:14,
from /home/antonio/Téléchargements/e1000e-3.6.0/src/netdev.c:30:
/home/antonio/Téléchargements/e1000e-3.6.0/src/kcompat.h:6742:28: error: redefinition of ‘skb_frag_off’
static inline unsigned int skb_frag_off(const skb_frag_t * frag)
^~~~~~~~~~~~
In file included from /usr/src/linux-headers-4.19.0-18-common/include/linux/if_ether.h:23,
from /usr/src/linux-headers-4.19.0-18-common/include/uapi/linux/ethtool.h:19,
from /usr/src/linux-headers-4.19.0-18-common/include/linux/ethtool.h:18,
from /usr/src/linux-headers-4.19.0-18-common/include/linux/netdevice.h:41,
from /home/antonio/Téléchargements/e1000e-3.6.0/src/netdev.c:13:
/usr/src/linux-headers-4.19.0-18-common/include/linux/skbuff.h:2795:28: note: previous definition of ‘skb_frag_off’ was here
static inline unsigned int skb_frag_off(const skb_frag_t *frag)
^~~~~~~~~~~~
make[3]: *** [/usr/src/linux-headers-4.19.0-18-common/scripts/Makefile.build:309: /home/antonio/Téléchargements/e1000e-3.6.0/src/netdev.o] Error 1
make[2]: *** [/usr/src/linux-headers-4.19.0-18-common/Makefile:1561: _module_/home/antonio/Téléchargements/e1000e-3.6.0/src] Error 2
make[2] : on quitte le répertoire « /usr/src/linux-headers-4.19.0-18-amd64 »
make[1]: *** [Makefile:146: sub-make] Error 2
make[1] : on quitte le répertoire « /usr/src/linux-headers-4.19.0-18-common »
make: *** [Makefile:73: default] Error 2
antonio@antonio:~/Téléchargements/e1000e-3.6.0/src$ sudo modprobe -rv e1000e
antonio@antonio:~/Téléchargements/e1000e-3.6.0/src$ sudo modprobe -v e1000e
insmod /lib/modules/4.19.0-18-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
antonio@antonio:~/Téléchargements/e1000e-3.6.0/src$ sudo update-initramfs -u
update-initramfs: Generating /boot/initrd.img-4.19.0-18-amd64
cryptsetup: WARNING: The initramfs image may not contain cryptsetup binaries
nor crypto modules. If that's on purpose, you may want to uninstall the
'cryptsetup-initramfs' package in order to disable the cryptsetup initramfs
integration and avoid this warning.
W: plymouth: The plugin label.so is missing, the selected theme might not work as expected.
W: plymouth: You might want to install the plymouth-themes package to fix this.
antonio@antonio:~/Téléchargements/e1000e-3.6.0/src$
LMDE 6 Faye base, Cinnamon 5.8.4, noyau 6.1.0-13-amd64, 8Go de ram, processeur Intel Celeron J4125 CPU 2.00GHz × 4, carte graphique Intel Corporation Device 3185; DD 256 Go SSD, en dual boot avec W10
Bonjour à tous;
Je reviens vous expliquer comment j'ai finalement résolu mon problème d'absence de reconnaissance de la connexion filaire.
Le forum "Debian-facile" m'a indiqué des liens expliquant comment changer de noyau via les backports.Le lien ci-dessous l'explique assez bien: https://forums.linuxmint.com/viewtopic. ... 2#p1778918
J'ai donc lancé la commande:
La mise à jour s'est bien passée et au redémarrage j'ai eu instantanément la connexion internet filaire.
Je n'ai pour le moment pas constaté d'anomalie sur l'ensemble des fonctionnalités; je considère le problème résolu et espère que ça serve à d'autres.
LMDE 6 Faye base, Cinnamon 5.8.4, noyau 6.1.0-13-amd64, 8Go de ram, processeur Intel Celeron J4125 CPU 2.00GHz × 4, carte graphique Intel Corporation Device 3185; DD 256 Go SSD, en dual boot avec W10
Sujet archivé (en lecture seule) car résolu.
Si besoin de rouvrir faire un MP à un membre de l'équipe
PC are like air conditioning, they becomes useless when you open Windows (L.T) PC1 : CM : ASRock 990FX | CPU: AMD FX 8350-8 cores, 4 GHz | RAM: 16 Go DDR3 1600 MHz | CG: ATI RX 580-8 Go | OS : LM 20.3 Uma Xfce 4.16 | K: 5.4
PC2 :Core2 Quad Q9650 @ 3 GHz | CG: Nvidia GTX 650TI | OS: LM 21.3 Xfce 4.18| K: 6.5 PC3 :Core i7-2600 @ 3,5 GHz | CG: ATI HD 4650 | OS: Emmade5 Xfce 4.18.0 | K: 6.1 PC4 : AMD Ryzen 5 3500X 4GHz | CG: GTX 970 | Ram : 8GB |OS : Debian 10.5 | K: 5.10 In a world without walls and fences, who needs windows and gates?