Dernier message de la page précédente :
oups ! désolé ! message rectifié !Merci Gerinald et Zebulon
Dernier message de la page précédente :
oups ! désolé ! message rectifié !Là t'essayais de compresser un fichier compressé... donc normal que tu es une erreur.USAP79 a écrit :Code : Tout sélectionner
biscuit@biscuit-HP-Laptop-15-bs0xx ~ $ tar jcvf r8168-8.036.00-tar.bz2 tar: Cowardly refusing to create an empty archive Try 'tar --help' or 'tar --usage' for more information.
PS: Tu aurais aussi pu aller dans ton dossier téléchargement, clic droit sur le fichier et faire "extraire ici"USAP79 a écrit : puis l'autre commande :
tar jxvf votre_archive.tar.bz2
renommé : tar jxvf r8168-8.036.00.tar.bz2
et ça donne :
Code : Tout sélectionner
biscuit@biscuit-HP-Laptop-15-bs0xx ~ $ tar jxvf r8168-8.036.00.tar.bz2 Téléchargements/ Téléchargements/r8168-8.036.00/ Téléchargements/r8168-8.036.00/autorun.sh Téléchargements/r8168-8.036.00/README Téléchargements/r8168-8.036.00/Makefile Téléchargements/r8168-8.036.00/src/ Téléchargements/r8168-8.036.00/src/Makefile_linux24x Téléchargements/r8168-8.036.00/src/rtltool.c Téléchargements/r8168-8.036.00/src/rtltool.h Téléchargements/r8168-8.036.00/src/rtl_eeprom.h Téléchargements/r8168-8.036.00/src/Makefile Téléchargements/r8168-8.036.00/src/r8168_asf.h Téléchargements/r8168-8.036.00/src/r8168_n.c Téléchargements/r8168-8.036.00/src/r8168.h Téléchargements/r8168-8.036.00/src/r8168_asf.c Téléchargements/r8168-8.036.00/src/rtl_eeprom.c Téléchargements/r8168-8.037.00.tar.bz2 Téléchargements/r8169-6.018.00.tar.bz2 Téléchargements/r8168-8.036.00.tar.bz2
Code : Tout sélectionner
<Quick install with proper kernel settings>
Unpack the tarball :
# tar vjxf r8168-8.aaa.bb.tar.bz2
Change to the directory:
# cd r8168-8.aaa.bb
If you are running the target kernel, then you should be able to do :
# ./autorun.sh (as root or with sudo)
You can check whether the driver is loaded by using following commands.
# lsmod | grep r8168
# ifconfig -a
If there is a device name, ethX, shown on the monitor, the linux
driver is loaded. Then, you can use the following command to activate
the ethX.
# ifconfig ethX up
,where X=0,1,2,...
Code : Tout sélectionner
cd r8168-8.036.00
Code : Tout sélectionner
sudo ./autorun.sh
Code : Tout sélectionner
lsmod | grep r8168
Code : Tout sélectionner
ifconfig -a
Code : Tout sélectionner
sudo lshw -C network
Code : Tout sélectionner
lsusb
Code : Tout sélectionner
lspci
Super, merciUSAP79 a écrit :oups ! désolé ! message rectifié !
Code : Tout sélectionner
biscuit@biscuit-HP-Laptop-15-bs0xx ~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 05c8:03ac Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 002: ID 0bda:b009 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code : Tout sélectionner
biscuit@biscuit-HP-Laptop-15-bs0xx ~ $ lspci
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:08.0 System peripheral: Intel Corporation Sky Lake Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723
Effectivement il n' y en a pas sur la touche F2, mais ça n'empêche pas qu'il faille le démarrer par un bouton ou une touche de fonctionUSAP79 a écrit : Sur le modele HP Laptop 15-bs036nf, il n'y a pas de voyant pour le wifi.
Il n'y a pas de voyant sur F2 comme sur certains modèles.
"Si votre ordinateur dispose d'une touche ou d'un bouton sans fil sur ou près du clavier et que le voyant d'activité sans fil est éteint ou orange, appuyez sur la touche ou sur le bouton pour activer l'adaptateur sans fil. Cette touche peut être la touche F10, F12 ou une touche portant un symbole d'avion."
Code : Tout sélectionner
inxi -nz
Code : Tout sélectionner
Card-1: Ta carte Ethernet realtech RLxxxxx
Card-2: La carte Wireless Network Adapter
Code : Tout sélectionner
sudo ifconfig -a
Code : Tout sélectionner
lspci | grep -i net