Merci Arghlub de me donner ton avis.
arghlub a écrit : ↑ven. 14 févr. 2020 15:44
je serais toi je supprimerais les raids si tu n'en pas d'utilité.
J'ai eu ce PC il y 1 an ou 2.
La première chose que j'ai faite, avant d'y installer Mint 19, c'est de chercher s'il n'y avait pas un raid mis en place, et je n'ai rien vu.
Mais ça ne veut pas dire que j'ai su où regarder...
Sur un précédent PC, j'étais sous Windows à l'époque, c'est un helpeur qui m'avait fait remarquer qu'il y avait des résidus de raid.
J'ai bien galéré pour les enlever, j'ai fini par trouver le manuel de la carte mère traduit en français, il fallait utiliser une combinaison de touches autres que celles permettant l'accès au bios, que je n'aurais pas pu deviner.
J'ai suivi le lien que tu me proposes, mais ça n'est pas à ma portée.
J'ai vaguement compris que c'est lié à des tables de hachage pour initialiser certains services de façon sécurisée, qu'il faut que l'entropie soit suffisante, et que unrandom fournit le type exact d'entropie voulue. Quant à rattacher ces infos à mon problème de raid
L'autre PC freezait régulièrement, je m'étais dit que ça venait peut-être de ça, mais celui-ci fonctionne bien, hormis une perte de connexion à la sortie de veille, je vais peut-être laisser comme ça, à moins que tu penses que ça peut causer des problèmes.
J'ai choisi un titre de sujet qui peut peut-être me permettre de poser une autre question à propos de dmseg
Je dois souvent, en sortant de veille, relancer le service network-manager.
Ça m'est arrivé tout à l'heure, et donc avant de faire quoi que ça soit, j'ai lancé la commande magique :
Code : Tout sélectionner
[ 1304.090627] logitech-hidpp-device 0003:046D:401B.0004: HID++ 2.0 device connected.
[ 1329.920393] logitech-hidpp-device 0003:046D:4016.0005: HID++ 2.0 device connected.
[ 1778.490665] gsmartcontrol[5083]: segfault at 0 ip 0000558bfbdeccea sp 00007ffc91994660 error 4 in gsmartcontrol[558bfbd24000+1c2000]
[ 6931.530525] wlx10feed1ba06f: deauthenticating from 14:0c:76:6e:f3:3e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6931.581344] PM: suspend entry (deep)
[ 6931.581346] PM: Syncing filesystems ... done.
[ 6932.138784] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6932.140510] OOM killer disabled.
[ 6932.140511] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6932.141766] Suspending console(s) (use no_console_suspend to debug)
[ 6932.177517] serial 00:06: disabled
[ 6932.178193] e1000e: EEE TX LPI TIMER: 00000011
[ 6932.188561] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6932.188593] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 6932.188754] sd 1:0:0:0: [sdb] Stopping disk
[ 6932.189717] sd 0:0:0:0: [sda] Stopping disk
[ 6932.884780] ACPI: Preparing to enter system sleep state S3
[ 6932.904555] PM: Saving platform NVS memory
[ 6932.904579] Disabling non-boot CPUs ...
[ 6932.921671] smpboot: CPU 1 is now offline
[ 6932.945785] smpboot: CPU 2 is now offline
[ 6932.969796] smpboot: CPU 3 is now offline
[ 6932.994010] smpboot: CPU 4 is now offline
[ 6933.016748] IRQ 23: no longer affine to CPU5
[ 6933.016753] IRQ 30: no longer affine to CPU5
[ 6933.017758] smpboot: CPU 5 is now offline
[ 6933.040740] IRQ 26: no longer affine to CPU6
[ 6933.041747] smpboot: CPU 6 is now offline
[ 6933.060724] IRQ 16: no longer affine to CPU7
[ 6933.061737] smpboot: CPU 7 is now offline
[ 6933.063430] ACPI: Low-level resume complete
[ 6933.063487] PM: Restoring platform NVS memory
[ 6933.064760] Enabling non-boot CPUs ...
[ 6933.064817] x86: Booting SMP configuration:
[ 6933.064818] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6933.067908] cache: parent cpu1 should not be sleeping
[ 6933.068111] CPU1 is up
[ 6933.068142] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 6933.071229] cache: parent cpu2 should not be sleeping
[ 6933.071444] CPU2 is up
[ 6933.071481] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 6933.074634] cache: parent cpu3 should not be sleeping
[ 6933.074855] CPU3 is up
[ 6933.074891] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 6933.077391] cache: parent cpu4 should not be sleeping
[ 6933.077801] CPU4 is up
[ 6933.077830] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 6933.080242] cache: parent cpu5 should not be sleeping
[ 6933.080443] CPU5 is up
[ 6933.080479] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 6933.082889] cache: parent cpu6 should not be sleeping
[ 6933.083099] CPU6 is up
[ 6933.083124] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 6933.085546] cache: parent cpu7 should not be sleeping
[ 6933.085912] CPU7 is up
[ 6933.092278] ACPI: Waking up from system sleep state S3
[ 6933.115203] sd 0:0:0:0: [sda] Starting disk
[ 6933.115204] sd 1:0:0:0: [sdb] Starting disk
[ 6933.117365] ACPI Error: Field [IRQE] at bit offset/length 136/16 exceeds size of target Buffer (128 bits) (20170831/dsopcode-235)
[ 6933.117374] No Local Variables are initialized for Method [DSRS]
[ 6933.117376] Initialized Arguments for Method [DSRS]: (2 arguments defined for method invocation)
[ 6933.117376] Arg0: 00000000394789f1 <Obj> Buffer(16) 47 01 F8 03 FF 03 00 08
[ 6933.117386] Arg1: 00000000508de523 <Obj> Integer 0000000000000000
[ 6933.117391] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.SIO1.DSRS, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
[ 6933.117398] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.UAR1._SRS, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
[ 6933.117406] serial 00:06: activation failed
[ 6933.117410] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -5
[ 6933.117412] PM: Device 00:06 failed to resume: error -5
[ 6933.269993] OOM killer enabled.
[ 6933.269993] Restarting tasks ... done.
[ 6933.281151] PM: suspend exit
[ 6933.325313] rtl8192cu: Chip version 0x11
[ 6933.354635] rtl8192cu: Board Type 0
[ 6933.354716] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 6933.354775] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 6933.354902] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[ 6933.357420] rtl8192cu 3-4:1.0 wlx10feed1ba06f: renamed from wlan0
[ 6933.452395] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6933.452418] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6933.453000] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6933.453002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6933.453003] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6933.453111] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6933.454014] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6933.454015] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6933.454016] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6933.454115] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6933.454464] ata1.00: configured for UDMA/133
[ 6933.456649] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6933.457154] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6933.457155] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6933.457156] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6933.457266] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6933.458106] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6933.458107] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6933.458108] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6933.458208] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6933.458544] ata2.00: configured for UDMA/133
[ 6933.460670] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6933.460671] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6933.460672] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6933.461027] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6933.462931] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6933.462933] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6933.462933] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6933.463284] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6933.463520] ata3.00: configured for UDMA/100
[ 6938.059464] e1000e: eno1 NIC Link is Down
[ 6938.060089] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 6938.282454] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 6938.283752] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[ 6938.285367] rtl8192cu: MAC auto ON okay!
[ 6938.299688] rtl8192cu: Tx queue select: 0x05
[ 6938.840077] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[ 6938.894368] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[ 6939.852816] wlx10feed1ba06f: authenticate with 14:0c:76:6e:f3:3e
[ 6939.863319] wlx10feed1ba06f: send auth to 14:0c:76:6e:f3:3e (try 1/3)
[ 6939.868718] wlx10feed1ba06f: authenticated
[ 6939.870109] wlx10feed1ba06f: associate with 14:0c:76:6e:f3:3e (try 1/3)
[ 6939.886577] wlx10feed1ba06f: RX AssocResp from 14:0c:76:6e:f3:3e (capab=0x411 status=0 aid=3)
[ 6939.986839] wlx10feed1ba06f: associated
[ 6939.999981] IPv6: ADDRCONF(NETDEV_CHANGE): wlx10feed1ba06f: link becomes ready
[ 7644.212850] wlx10feed1ba06f: deauthenticating from 14:0c:76:6e:f3:3e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7644.241622] PM: suspend entry (deep)
[ 7644.241623] PM: Syncing filesystems ... done.
[ 7644.681241] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 7644.683322] OOM killer disabled.
[ 7644.683323] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7644.684643] Suspending console(s) (use no_console_suspend to debug)
[ 7644.720414] serial 00:06: disabled
[ 7644.721561] e1000e: EEE TX LPI TIMER: 00000011
[ 7644.793776] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 7644.793874] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7644.793934] sd 1:0:0:0: [sdb] Stopping disk
[ 7644.794999] sd 0:0:0:0: [sda] Stopping disk
[ 7645.482152] ACPI: Preparing to enter system sleep state S3
[ 7645.501854] PM: Saving platform NVS memory
[ 7645.501877] Disabling non-boot CPUs ...
[ 7645.519158] smpboot: CPU 1 is now offline
[ 7645.543148] smpboot: CPU 2 is now offline
[ 7645.567125] smpboot: CPU 3 is now offline
[ 7645.591288] smpboot: CPU 4 is now offline
[ 7645.614004] IRQ 23: no longer affine to CPU5
[ 7645.614009] IRQ 30: no longer affine to CPU5
[ 7645.615014] smpboot: CPU 5 is now offline
[ 7645.638004] IRQ 26: no longer affine to CPU6
[ 7645.639024] smpboot: CPU 6 is now offline
[ 7645.661988] IRQ 25: no longer affine to CPU7
[ 7645.663011] smpboot: CPU 7 is now offline
[ 7645.664684] ACPI: Low-level resume complete
[ 7645.664736] PM: Restoring platform NVS memory
[ 7645.666006] Enabling non-boot CPUs ...
[ 7645.666052] x86: Booting SMP configuration:
[ 7645.666053] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7645.669144] cache: parent cpu1 should not be sleeping
[ 7645.669345] CPU1 is up
[ 7645.669379] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 7645.672468] cache: parent cpu2 should not be sleeping
[ 7645.672679] CPU2 is up
[ 7645.672711] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 7645.675809] cache: parent cpu3 should not be sleeping
[ 7645.676032] CPU3 is up
[ 7645.676061] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 7645.678570] cache: parent cpu4 should not be sleeping
[ 7645.678962] CPU4 is up
[ 7645.678990] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 7645.681382] cache: parent cpu5 should not be sleeping
[ 7645.681587] CPU5 is up
[ 7645.681612] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 7645.684041] cache: parent cpu6 should not be sleeping
[ 7645.684251] CPU6 is up
[ 7645.684276] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 7645.686691] cache: parent cpu7 should not be sleeping
[ 7645.687068] CPU7 is up
[ 7645.693430] ACPI: Waking up from system sleep state S3
[ 7645.718962] ACPI Error: Field [IRQE] at bit offset/length 136/16 exceeds size of target Buffer (128 bits) (20170831/dsopcode-235)
[ 7645.718972] No Local Variables are initialized for Method [DSRS]
[ 7645.718974] Initialized Arguments for Method [DSRS]: (2 arguments defined for method invocation)
[ 7645.718975] Arg0: 0000000069b8e3f9 <Obj> Buffer(16) 47 01 F8 03 FF 03 00 08
[ 7645.718987] Arg1: 00000000117a690d <Obj> Integer 0000000000000000
[ 7645.718993] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.SIO1.DSRS, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
[ 7645.719003] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.UAR1._SRS, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
[ 7645.719012] serial 00:06: activation failed
[ 7645.719017] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -5
[ 7645.719019] PM: Device 00:06 failed to resume: error -5
[ 7645.719308] sd 0:0:0:0: [sda] Starting disk
[ 7645.719417] sd 1:0:0:0: [sdb] Starting disk
[ 7645.868548] OOM killer enabled.
[ 7645.868549] Restarting tasks ... done.
[ 7645.876040] PM: suspend exit
[ 7645.926739] rtl8192cu: Chip version 0x11
[ 7645.956289] rtl8192cu: Board Type 0
[ 7645.956369] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 7645.956420] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 7645.956549] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'
[ 7645.958936] rtl8192cu 3-4:1.0 wlx10feed1ba06f: renamed from wlan0
[ 7646.053652] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7646.053671] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7646.053688] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7646.054355] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7646.054357] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 7646.054358] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 7646.054454] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 7646.054467] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7646.054468] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 7646.054469] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 7646.054576] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 7646.055805] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7646.055816] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 7646.055819] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 7646.055825] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7646.055827] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 7646.055830] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 7646.055938] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 7646.055954] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 7646.056277] ata2.00: configured for UDMA/133
[ 7646.056290] ata1.00: configured for UDMA/133
[ 7646.061984] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7646.061986] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 7646.061987] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 7646.062316] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 7646.064101] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 7646.064102] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 7646.064103] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 7646.064456] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 7646.064686] ata3.00: configured for UDMA/100
[ 7650.833129] e1000e: eno1 NIC Link is Down
[ 7650.833692] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 7651.055705] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 7651.057092] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[ 7651.058709] rtl8192cu: MAC auto ON okay!
[ 7651.074460] rtl8192cu: Tx queue select: 0x05
[ 7651.615129] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[ 7651.663146] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[ 7652.618307] wlx10feed1ba06f: authenticate with 14:0c:76:6e:f3:3e
[ 7652.628893] wlx10feed1ba06f: send auth to 14:0c:76:6e:f3:3e (try 1/3)
[ 7652.631702] wlx10feed1ba06f: authenticated
[ 7652.635374] wlx10feed1ba06f: associate with 14:0c:76:6e:f3:3e (try 1/3)
[ 7652.641606] wlx10feed1ba06f: RX AssocResp from 14:0c:76:6e:f3:3e (capab=0x411 status=0 aid=3)
[ 7652.741921] wlx10feed1ba06f: associated
[ 7652.749786] IPv6: ADDRCONF(NETDEV_CHANGE): wlx10feed1ba06f: link becomes ready
[10102.832116] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[10102.838237] [UFW BLOCK] IN=wlx10feed1ba06f OUT= MAC=10:fe:ed:1b:a0:6f:14:0c:76:6e:f3:3d:08:00 SRC=192.168.0.254 DST=192.168.0.5 LEN=90 TOS=0x00 PREC=0x00 TTL=64 ID=59506 DF PROTO=UDP SPT=137 DPT=60419 LEN=70
[10105.843015] [UFW BLOCK] IN=wlx10feed1ba06f OUT= MAC=10:fe:ed:1b:a0:6f:14:0c:76:6e:f3:3d:08:00 SRC=192.168.0.254 DST=192.168.0.5 LEN=90 TOS=0x00 PREC=0x00 TTL=64 ID=59576 DF PROTO=UDP SPT=137 DPT=42253 LEN=70
[10108.853229] [UFW BLOCK] IN=wlx10feed1ba06f OUT= MAC=10:fe:ed:1b:a0:6f:14:0c:76:6e:f3:3d:08:00 SRC=192.168.0.254 DST=192.168.0.5 LEN=90 TOS=0x00 PREC=0x00 TTL=64 ID=59606 DF PROTO=UDP SPT=137 DPT=34094 LEN=70
[17116.203196] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[19136.658535] mmap: appsrc0:src (14036): VmData 270233600 exceed data ulimit 269208352. Update limits or use boot option ignore_rlimit_data.
[19136.658731] traps: appsrc0:src[14036] trap int3 ip:7f178b80bea1 sp:7f171b9ba3c0 error:0 in libglib-2.0.so.0.5600.4[7f178b7ba000+114000]
[19137.885348] traps: multiqueue0:src[14071] trap int3 ip:7efc071cdea1 sp:7efbf1766630 error:0 in libglib-2.0.so.0.5600.4[7efc0717c000+114000]
[19139.695465] traps: multiqueue0:src[14158] trap int3 ip:7f0b29bc4ea1 sp:7f0b03ffd7d0 error:0 in libglib-2.0.so.0.5600.4[7f0b29b73000+114000]
[19141.338151] traps: multiqueue0:src[14242] trap int3 ip:7fa95a649ea1 sp:7fa944b15630 error:0 in libglib-2.0.so.0.5600.4[7fa95a5f8000+114000]
[19143.027987] traps: multiqueue0:src[14325] trap int3 ip:7fb139443ea1 sp:7fb11b7fc630 error:0 in libglib-2.0.so.0.5600.4[7fb1393f2000+114000]
[19155.498465] traps: multiqueue0:src[15240] trap int3 ip:7f5dfbb80ea1 sp:7f5de61507d0 error:0 in libglib-2.0.so.0.5600.4[7f5dfbb2f000+114000]
[23002.053430] wlx10feed1ba06f: deauthenticating from 14:0c:76:6e:f3:3e by local choice (Reason: 3=DEAUTH_LEAVING)
[23002.131848] PM: suspend entry (deep)
[23002.131850] PM: Syncing filesystems ... done.
[23002.760196] Freezing user space processes ... (elapsed 0.001 seconds) done.
[23002.762191] OOM killer disabled.
[23002.762191] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[23002.763533] Suspending console(s) (use no_console_suspend to debug)
[23002.799268] serial 00:06: disabled
[23002.799651] e1000e: EEE TX LPI TIMER: 00000011
[23002.808745] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[23002.810213] sd 0:0:0:0: [sda] Stopping disk
[23002.867190] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[23002.867370] sd 1:0:0:0: [sdb] Stopping disk
[23003.561159] ACPI: Preparing to enter system sleep state S3
[23003.580886] PM: Saving platform NVS memory
[23003.580911] Disabling non-boot CPUs ...
[23003.598216] smpboot: CPU 1 is now offline
[23003.622175] smpboot: CPU 2 is now offline
[23003.646171] smpboot: CPU 3 is now offline
[23003.670345] smpboot: CPU 4 is now offline
[23003.693043] IRQ 23: no longer affine to CPU5
[23003.693049] IRQ 30: no longer affine to CPU5
[23003.694065] smpboot: CPU 5 is now offline
[23003.717039] IRQ 26: no longer affine to CPU6
[23003.718060] smpboot: CPU 6 is now offline
[23003.741000] IRQ 25: no longer affine to CPU7
[23003.742024] smpboot: CPU 7 is now offline
[23003.743731] ACPI: Low-level resume complete
[23003.743784] PM: Restoring platform NVS memory
[23003.745037] Enabling non-boot CPUs ...
[23003.745114] x86: Booting SMP configuration:
[23003.745115] smpboot: Booting Node 0 Processor 1 APIC 0x2
[23003.748210] cache: parent cpu1 should not be sleeping
[23003.748413] CPU1 is up
[23003.748442] smpboot: Booting Node 0 Processor 2 APIC 0x4
[23003.751548] cache: parent cpu2 should not be sleeping
[23003.751761] CPU2 is up
[23003.751790] smpboot: Booting Node 0 Processor 3 APIC 0x6
[23003.754885] cache: parent cpu3 should not be sleeping
[23003.755108] CPU3 is up
[23003.755135] smpboot: Booting Node 0 Processor 4 APIC 0x1
[23003.757608] cache: parent cpu4 should not be sleeping
[23003.758006] CPU4 is up
[23003.758033] smpboot: Booting Node 0 Processor 5 APIC 0x3
[23003.760450] cache: parent cpu5 should not be sleeping
[23003.760647] CPU5 is up
[23003.760672] smpboot: Booting Node 0 Processor 6 APIC 0x5
[23003.763083] cache: parent cpu6 should not be sleeping
[23003.763294] CPU6 is up
[23003.763319] smpboot: Booting Node 0 Processor 7 APIC 0x7
[23003.765741] cache: parent cpu7 should not be sleeping
[23003.766113] CPU7 is up
[23003.772475] ACPI: Waking up from system sleep state S3
[23003.795396] sd 0:0:0:0: [sda] Starting disk
[23003.795405] sd 1:0:0:0: [sdb] Starting disk
[23003.797416] ACPI Error: Field [IRQE] at bit offset/length 136/16 exceeds size of target Buffer (128 bits) (20170831/dsopcode-235)
[23003.797424] No Local Variables are initialized for Method [DSRS]
[23003.797426] Initialized Arguments for Method [DSRS]: (2 arguments defined for method invocation)
[23003.797427] Arg0: 0000000004bf5237 <Obj> Buffer(16) 47 01 F8 03 FF 03 00 08
[23003.797436] Arg1: 00000000695f87a4 <Obj> Integer 0000000000000000
[23003.797441] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.SIO1.DSRS, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
[23003.797448] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.UAR1._SRS, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
[23003.797455] serial 00:06: activation failed
[23003.797459] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -5
[23003.797461] PM: Device 00:06 failed to resume: error -5
[23003.942318] OOM killer enabled.
[23003.942319] Restarting tasks ... done.
[23003.954841] PM: suspend exit
[23003.999983] rtl8192cu: Chip version 0x11
[23004.029380] rtl8192cu: Board Type 0
[23004.029459] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[23004.029528] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[23004.029673] ieee80211 phy3: Selected rate control algorithm 'rtl_rc'
[23004.132677] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23004.132711] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[23004.133255] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[23004.133257] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[23004.133259] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[23004.133373] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[23004.134229] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[23004.134230] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[23004.134231] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[23004.134330] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[23004.134673] ata2.00: configured for UDMA/133
[23004.136695] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[23004.137256] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[23004.137258] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[23004.137259] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[23004.137367] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[23004.138240] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[23004.138241] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[23004.138242] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[23004.138340] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[23004.138665] ata1.00: configured for UDMA/133
[23004.140929] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[23004.140931] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[23004.140931] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[23004.141282] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[23004.143031] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[23004.143032] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[23004.143033] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[23004.143380] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[23004.143615] ata3.00: configured for UDMA/100
[23008.306277] rtl8192cu 3-4:1.0 wlx10feed1ba06f: renamed from wlan0
[23008.876034] e1000e: eno1 NIC Link is Down
[23008.876663] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[23009.098754] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[23009.100495] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[23009.102089] rtl8192cu: MAC auto ON okay!
[23009.114870] rtl8192cu: Tx queue select: 0x05
[23009.654926] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[23009.727777] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[23053.373492] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[23053.375717] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[23053.377270] rtl8192cu: MAC auto ON okay!
[23053.391755] rtl8192cu: Tx queue select: 0x05
[23053.931438] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[23054.038046] IPv6: ADDRCONF(NETDEV_UP): wlx10feed1ba06f: link is not ready
[23054.988647] wlx10feed1ba06f: authenticate with 14:0c:76:6e:f3:3e
[23054.999147] wlx10feed1ba06f: send auth to 14:0c:76:6e:f3:3e (try 1/3)
[23055.012892] wlx10feed1ba06f: authenticated
[23055.014260] wlx10feed1ba06f: associate with 14:0c:76:6e:f3:3e (try 1/3)
[23055.023009] wlx10feed1ba06f: RX AssocResp from 14:0c:76:6e:f3:3e (capab=0x411 status=0 aid=3)
[23055.123199] wlx10feed1ba06f: associated
[23056.034935] IPv6: ADDRCONF(NETDEV_CHANGE): wlx10feed1ba06f: link becomes ready
mia@mia-PC5:~$
Je n'ai pas collé le début car il y a beaucoup de lignes, je pense être remontée assez haut.
A part que le link n'est pas ready, ça ne me parle pas beaucoup. Les connaisseurs voient-ils un renseignement pouvant me mettre sur la voie ?
Merci pour votre analyse