Boot fastidieux sur disque GPT

[Berni18]

Bonjour,
J'ai installé Linux MINT Cinnamon 20 sur un nouveau disque vierge SSD en GPT sur un portable Samsung Notebook NP400B5B-AG3FR en mode Legacy
Création d'une petite partition non formaté au début du disque bios_grub.
Pas de démarrage direct au Boot.

Code : Tout sélectionner

Reboot and select proper boot device.

un appui sur [Echap] affiche les disques disponibles (ici le SSD et le CD) : là je peux démarrer Linux MINT.
Mon Boot Info :

Code : Tout sélectionner

boot-info-4ppa125                                              [20201113_1600]

============================== Boot Info Summary ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 2048 
    of the same hard drive for core.img. core.img is at this location and 
    looks for (,gpt1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_gpt biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 20
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda5: __________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 


================================ 1 OS detected =================================

OS#1:   L'OS actuellement utilisé - Linux Mint 20 CurrentSession on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-53-generic root=UUID=9e8e43cd-912b-4984-a0e2-4b85b33f6c09 ro


===================================== UEFI =====================================

This installed-session is not in EFI-mode.



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	hasBIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	not-far
sda2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda4	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda4	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda2	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda4	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.53 GiB, 1000207286272 bytes, 1953529856 sectors
Disk identifier: 337A5CE4-63A7-4A4C-BB9E-F5BED80489C3
           Start        End    Sectors   Size Type
sda1        4096   72558591   72554496  34.6G Linux filesystem
sda2    72558592  413822975  341264384 162.7G Linux filesystem
sda3  1930092544 1953527807   23435264  11.2G Linux swap
sda4   413822976 1930092543 1516269568   723G Linux filesystem
sda5        2048       4095       2048     1M BIOS boot
Partition table entries are not in disk order.

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:512:gpt:ATA SanDisk SSD PLUS:;
5:1049kB:2097kB:1049kB:::bios_grub;
1:2097kB:37.1GB:37.1GB:ext4::;
2:37.1GB:212GB:175GB:ext4::;
4:212GB:988GB:776GB:ext4::;
3:988GB:1000GB:12.0GB:linux-swap(v1)::swap;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE UUID                                 PARTUUID                             LABEL PARTLABEL
sda                                                                                           
├─sda1 ext4   9e8e43cd-912b-4984-a0e2-4b85b33f6c09 21bfe935-48c1-455c-b1cb-10addb3c13b8       
├─sda2 ext4   f6858d7f-3992-4dc7-b595-90637fbb0e6a ec10991b-38ac-4fdd-bf06-e2c9bd86447a       
├─sda3 swap   365febeb-ec7c-4e89-89b2-29665abd3142 a3bd2cb7-31ab-4dee-b43d-f571c40c587f       
├─sda4 ext4   8f8f5654-de7b-4cf0-94af-b12793d29ce0 5e5d9857-4a03-42ad-9292-bc94273b69ea DATAS 
└─sda5                                             3e2ae44e-9134-43bc-8ae2-f7e2334ef237       

df (filtered): _________________________________________________________________

       Avail Use% Mounted on
sda1    23.6G  25% /
sda2   145.3G   4% /home
sda4   317.7G  50% /media/DATAS

Mount options: __________________________________________________________________

sda1   rw,noatime,errors=remount-ro
sda2   rw,noatime
sda4   rw,noatime

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Linux Mint 20 Cinnamon   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
Linux Mint 20 Cinnamon, with Linux 5.4.0-53-generic   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
Linux Mint 20 Cinnamon, with Linux 5.4.0-52-generic   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
Linux Mint 20 Cinnamon, with Linux 5.4.0-26-generic   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=9e8e43cd-912b-4984-a0e2-4b85b33f6c09 /               ext4    noatime,errors=remount-ro 0       1
# /home was on /dev/sda2 during installation
UUID=f6858d7f-3992-4dc7-b595-90637fbb0e6a /home           ext4    noatime,defaults        0       2
# DATAS was on /dev/sda3
UUID=8f8f5654-de7b-4cf0-94af-b12793d29ce0 /media/DATAS     ext4    noatime,defaults        0       0
# swap was on /dev/sda3 during installation
UUID=365febeb-ec7c-4e89-89b2-29665abd3142 none            swap    sw              0       0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  28.471851349 = 30.571417600   boot/grub/grub.cfg                             1
  28.450645447 = 30.548647936   boot/grub/i386-pc/core.img                     1
   2.895641327 = 3.109171200    boot/vmlinuz                                   1
   1.989372253 = 2.136072192    boot/vmlinuz-5.4.0-26-generic                  1
   5.169078827 = 5.550256128    boot/vmlinuz-5.4.0-52-generic                  1
   2.895641327 = 3.109171200    boot/vmlinuz-5.4.0-53-generic                  1
   5.169078827 = 5.550256128    boot/vmlinuz.old                               1
   3.824077606 = 4.106072064    boot/initrd.img                                2
   5.456409454 = 5.858775040    boot/initrd.img-5.4.0-26-generic               1
   3.736324310 = 4.011847680    boot/initrd.img-5.4.0-52-generic               5
   3.824077606 = 4.106072064    boot/initrd.img-5.4.0-53-generic               2
   3.736324310 = 4.011847680    boot/initrd.img.old                            5

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 oct.   1 17:19 10_linux
-rwxr-xr-x 1 root root 42359 oct.   1 17:19 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom


=============================== StdErr Messages ================================

File descriptor 63 (pipe:[824984]) leaked on lvs invocation. Parent PID 15561: /bin/bash

Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s   

Comment faire pour démarrer automatiquement au Boot ?
Merci

[arghlub]

Salut

Et donc ? quelle est la question ?
si t'es en uefi ( partitionnement GPT) il faut que tu installes le grub sur "sda" pas sur "sda1".

par contre si tu es en "legacy" (bios → partitionnement MBR) il faut que tu mettes ton grub sur la 1ère partition du disque ("sda1" selon ton dernier message).

Cependant, ta "question" est floue, c'est quoi qui marche pas ????

[arghlub]

PS :

Code : Tout sélectionner

===================================== UEFI =====================================
This installed-session is not in EFI-mode.
 

tu es en mode Bios-legacy donc installe ton grub sur la partition "sda1", si tu ne veux pas faire ça toi même en terminal, lance boot-repair : https://sourceforge.net/p/boot-repair/home/fr/

[Berni18]

C'est bien sur sda1 que grub est installé

Code : Tout sélectionner

sda1: __________________________________________________________________________
    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 20
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

J'ai lancé Boot-Repair sans aucun changement :
Linux ne démarre pas automatiquement au Boot !!
Toujours le message : Reboot and select proper boot device.

[arghlub]

pardon je me suis trompé ..... j'étais pas réveillé ce matin
c'est l'inverse, il faut que tu mettes ton grub sur "sda" si t'es en "legacy / mbr" .

[Berni18]

Ok,
J'ai donc relancé Boot-repair en forçant le boot sur sda.
Voici le boot-info :

Code : Tout sélectionner

boot-repair-4ppa125                                              [20201115_1041]

============================= Boot Repair Summary ==============================

Default settings: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub2 of
sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s      

User settings: _________________________________________________________________

The settings chosen by the user will reinstall the grub2 of
sda1 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s



========================= Reinstall the grub2 of sda1 ==========================

grub-install --version
grub-install (GRUB) 2.04-1ubuntu26.6

==> Reinstall the GRUB of sda1 into the MBR of sda

grub-install /dev/sda
Installing for i386-pc platform.
Installation finished. No error reported.

update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/50_linuxmint.cfg'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.4.0-53-generic
Found initrd image: /boot/initrd.img-5.4.0-53-generic
Found linux image: /boot/vmlinuz-5.4.0-52-generic
Found initrd image: /boot/initrd.img-5.4.0-52-generic
Found linux image: /boot/vmlinuz-5.4.0-26-generic
Found initrd image: /boot/initrd.img-5.4.0-26-generic
File descriptor 63 (pipe:[57206]) leaked on lvs invocation. Parent PID 18843: /bin/sh

Unhide GRUB boot menu in sda1/boot/grub/grub.cfg

Le démarrage de l'ordinateur a été correctement réparé.

Vous pouvez maintenant redémarrer votre ordinateur.


============================ Boot Info After Repair ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 34 
    of the same hard drive for core.img. core.img is at this location and 
    looks for (,gpt1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_gpt biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 20
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda4: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 

================================ 1 OS detected =================================

OS#1:   L'OS actuellement utilisé - Linux Mint 20 CurrentSession on sda1

============================ Architecture/Host Info ============================

CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-53-generic root=UUID=9e8e43cd-912b-4984-a0e2-4b85b33f6c09 ro


===================================== UEFI =====================================

This installed-session is not in EFI-mode.

============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	hasBIOSboot,	has-noESP, 	not-usb,	not-mmc, has-os,	34 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: is-os,	64, apt-get,	grub-pc ,	grub2,	grub-install,	grubenv-ok,	update-grub,	not-far
sda2	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios
sda4	: no-os,	32, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	farbios

Partitions info (2/3): _________________________________________________________

sda1	: isnotESP,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot
sda4	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot

Partitions info (3/3): _________________________________________________________

sda1	: not-sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sda
sda2	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda
sda4	: maybesepboot,	no-boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	std-grub.d,	sda

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.53 GiB, 1000207286272 bytes, 1953529856 sectors
Disk identifier: 337A5CE4-63A7-4A4C-BB9E-F5BED80489C3
           Start        End    Sectors   Size Type
sda1        4096   72558591   72554496  34.6G Linux filesystem
sda2    72558592  413822975  341264384 162.7G Linux filesystem
sda3  1930092544 1953527807   23435264  11.2G Linux swap
sda4   413822976 1930092543 1516269568   723G Linux filesystem
sda6          34       2047       2014  1007K BIOS boot
Partition table entries are not in disk order.

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:512:gpt:ATA SanDisk SSD PLUS:;
6:17.4kB:1049kB:1031kB:::bios_grub;
1:2097kB:37.1GB:37.1GB:ext4::;
2:37.1GB:212GB:175GB:ext4::;
4:212GB:988GB:776GB:ext4::;
3:988GB:1000GB:12.0GB:linux-swap(v1)::swap;

blkid (filtered): ______________________________________________________________

NAME   FSTYPE UUID                                 PARTUUID                             LABEL PARTLABEL
sda                                                                                           
├─sda1 ext4   9e8e43cd-912b-4984-a0e2-4b85b33f6c09 21bfe935-48c1-455c-b1cb-10addb3c13b8       
├─sda2 ext4   f6858d7f-3992-4dc7-b595-90637fbb0e6a ec10991b-38ac-4fdd-bf06-e2c9bd86447a       
├─sda3 swap   365febeb-ec7c-4e89-89b2-29665abd3142 a3bd2cb7-31ab-4dee-b43d-f571c40c587f       
├─sda4 ext4   8f8f5654-de7b-4cf0-94af-b12793d29ce0 5e5d9857-4a03-42ad-9292-bc94273b69ea DATAS 
└─sda6                                             a378999a-b6fc-412c-865f-e0ffd3dab4e8       

df (filtered): _________________________________________________________________

       Avail Use% Mounted on
sda1    23.6G  25% /
sda2   144.8G   4% /home
sda4   317.7G  50% /media/DATAS

Mount options: __________________________________________________________________

sda1   rw,noatime,errors=remount-ro
sda2   rw,noatime
sda4   rw,noatime

====================== sda1/boot/grub/grub.cfg (filtered) ======================

Ubuntu   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
Ubuntu, with Linux 5.4.0-53-generic   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
Ubuntu, with Linux 5.4.0-52-generic   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
Ubuntu, with Linux 5.4.0-26-generic   9e8e43cd-912b-4984-a0e2-4b85b33f6c09
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###

========================== sda1/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=9e8e43cd-912b-4984-a0e2-4b85b33f6c09 /               ext4    noatime,errors=remount-ro 0       1
# /home was on /dev/sda2 during installation
UUID=f6858d7f-3992-4dc7-b595-90637fbb0e6a /home           ext4    noatime,defaults        0       2
# DATAS was on /dev/sda3
UUID=8f8f5654-de7b-4cf0-94af-b12793d29ce0 /media/DATAS     ext4    noatime,defaults        0       0
# swap was on /dev/sda3 during installation
UUID=365febeb-ec7c-4e89-89b2-29665abd3142 none            swap    sw              0       0

======================= sda1/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT=""
GRUB_CMDLINE_LINUX=""

==================== sda1: Location of files loaded by Grub ====================
           GiB - GB             File                                 Fragment(s)
  22.154163361 = 23.787851776   boot/grub/grub.cfg                             1
  28.468391418 = 30.567702528   boot/grub/i386-pc/core.img                     1
   2.895641327 = 3.109171200    boot/vmlinuz                                   1
   1.989372253 = 2.136072192    boot/vmlinuz-5.4.0-26-generic                  1
   5.169078827 = 5.550256128    boot/vmlinuz-5.4.0-52-generic                  1
   2.895641327 = 3.109171200    boot/vmlinuz-5.4.0-53-generic                  1
   5.169078827 = 5.550256128    boot/vmlinuz.old                               1
   3.824077606 = 4.106072064    boot/initrd.img                                2
   5.456409454 = 5.858775040    boot/initrd.img-5.4.0-26-generic               1
   3.736324310 = 4.011847680    boot/initrd.img-5.4.0-52-generic               5
   3.824077606 = 4.106072064    boot/initrd.img-5.4.0-53-generic               2
   3.736324310 = 4.011847680    boot/initrd.img.old                            5

===================== sda1: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 17622 oct.   1 17:19 10_linux
-rwxr-xr-x 1 root root 42359 oct.   1 17:19 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15  2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15  2020 30_os-prober
-rwxr-xr-x 1 root root  1424 avril 15  2020 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 15  2020 40_custom
-rwxr-xr-x 1 root root   216 avril 15  2020 41_custom

=============================== StdErr Messages ================================
File descriptor 63 (pipe:[57206]) leaked on lvs invocation. Parent PID 5953: /bin/bash

Redémarrage de la machine, ....
... qui s'obstine toujours à afficher le même message d'erreur : : "Reboot and select proper boot device".
J'ai vérifier l'ordre des disques sur le Bios : Le SSD est bien en premier.
Vérification de la position de grub :

Code : Tout sélectionner

sudo debconf-show grub-pc          
  grub2/kfreebsd_cmdline_default: quiet splash
  grub-efi/install_devices_failed: false
* grub-pc/install_devices_disks_changed: /dev/disk/by-id/ata-SanDisk_SSD_PLUS_1000GB_203817A00594
* grub-pc/install_devices: /dev/disk/by-id/ata-SanDisk_SSD_PLUS_1000GB_203817A00594
  grub2/kfreebsd_cmdline:
  grub-efi/partition_description:
  grub2/no_efi_extra_removable: false
  grub-pc/timeout: 10
  grub-pc/hidden_timeout: true
  grub-efi/install_devices_empty: false
  grub-efi/install_devices_disks_changed:
  grub2/update_nvram: true
  grub2/unsigned_kernels_title:
  grub-pc/disk_description:
  grub-pc/install_devices_failed_upgrade: true
  grub-pc/kopt_extracted: false
* grub2/linux_cmdline:
  grub-pc/install_devices_failed: false
  grub-pc/install_devices_empty: false
  grub-pc/partition_description:
  grub-pc/chainload_from_menu.lst: true
  grub-pc/mixed_legacy_and_grub2: true
  grub2/unsigned_kernels:
  grub-pc/postrm_purge_boot_grub: false
* grub2/linux_cmdline_default:
  grub-efi/install_devices:

Grub est bien sur la MBR de sda

Code : Tout sélectionner

s -l /dev/disk/by-id
total 0
lrwxrwxrwx 1 root root  9 nov.  15 16:38 ata-SanDisk_SSD_PLUS_1000GB_203817A00594 -> ../../sda
lrwxrwxrwx 1 root root 10 nov.  15 16:38 ata-SanDisk_SSD_PLUS_1000GB_203817A00594-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 nov.  15 16:38 ata-SanDisk_SSD_PLUS_1000GB_203817A00594-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 nov.  15 16:38 ata-SanDisk_SSD_PLUS_1000GB_203817A00594-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 nov.  15 16:38 ata-SanDisk_SSD_PLUS_1000GB_203817A00594-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 nov.  15 16:38 ata-SanDisk_SSD_PLUS_1000GB_203817A00594-part6 -> ../../sda6

[Berni18]

Bonjour,
Finalement, je pense que cela vient du Bios trop ancien.
Donc, j'ai recréer la table de partition en mode Ms-Dos sur le disque SSD
Puis, réinstallé Linux MINT.
Tout fonctionne correctement maintenant.

[alain]

Bonjour.

Sujet archivé (en lecture seule) car résolu.
Si besoin de rouvrir faire un MP à un membre de l'équipe