Merci Zeb et Robin, je sais que je ne suis pas le plus doué, mais en presque 6 mois il y a quand même quelques reflexes acquis!!!
Les 3 paquets de la capture de Zeb sont bien installés chez moi (et sur ma 2éme lmde de sauvegarde, j'avais même essayé d'installer les 2 autres, puis de désinstaller et réinstaller le tout, sans résultat.)
Pour la version c'est bien ça Robin
En passant par Cups, la méthode classique d'installation des imprimantes, l'imprimante est bien là, mais aucun Hplip n'est proposé, (et en cliquant ensuite sur "suivant" tout se ferme, sans rien installer) :
Une recherche de Hp device manager ne capte rien :
Un diagnostic de Hplip driver avec Hp manager a installé ceci, sans que rien ne change:
Code : Tout sélectionner
HP Linux Imaging and Printing System (ver. 3.14.6)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Checking for Deprecated items....
error: This distro (i.e linuxmint 2) is either deprecated or not yet supported.
The diagnosis is limited on unsupported platforms. Do you want to continue?(y=yes*, n=no):y
Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility
Checking for Dependencies....
warning: linuxmint-2 version is not supported. Using linuxmint-17 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u1 (2017-02-22) GNU/Linux
Host: lmde_mate_ssd500
Proc: 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u1 (2017-02-22) GNU/Linux
Distribution: linuxmint 2
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.14.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for linuxmint distro 2 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.14.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
html=/usr/share/doc/hplip-3.14.6
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.14.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Aucun fichier ou dossier de ce type
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri =
printer_name =
working_dir = .
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[upgrade]
notify_upgrade = true
last_upgraded_time = 1488640191.87466
pending_upgrade_time = 0
[installation]
date_time = 04/03/2017 16:18:07
version = 3.14.6
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
gs Ghostscript REQUIRED 7.05 9.06 OK -
network Network-wget OPTIONAL - 1.16 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.24 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
error: dbus DBus REQUIRED - 1.8.22 MISSING 'DBUS may not be installed or not running'
error: cups CUPS REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
error: xsane SANE-GUI OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 3.1.8 MISSING 'reportlab needs to be installed'
error: libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 MISSING 'libcrypto needs to be installed'
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.11.2 OK -
error: libjpeg JPEG-Lib REQUIRED - - MISSING 'libjpeg needs to be installed'
libpthread POSIX-Threads-Lib REQUIRED - 2.19 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK -
error: python-devel Python-SDK REQUIRED 2.2 2.7.9 MISSING 'python-devel needs to be installed'
pyqt4 Python-Qt4 REQUIRED 4.0 4.11.2 OK -
error: cups-devel CUPS-SDK REQUIRED - - MISSING 'cups-devel needs to be installed'
error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane Scan-Lib REQUIRED - - OK -
error: cups-image CUPS-Image-Lib REQUIRED - - MISSING 'cups-image needs to be installed'
error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.9.2 OK -
error: libtool Build-tools REQUIRED - - MISSING 'libtool needs to be installed'
make GNU-Build-tools REQUIRED 3.0 4.0 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.14.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.14.6 OK -
hpmudext IO-Extension REQUIRED - 3.14.6 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.14.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.14.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: Aucune destination ajoutée.
--------------
| PERMISSION |
--------------
error: Unsupported model: DeskJet_3630_series
Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing or 'cups' service is not running.
error: 'openssl' package is missing/incompatible
error: 'libjpeg8-dev' package is missing/incompatible
error: 'python-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing or 'cups' service is not running.
error: 'cups-bsd' package is missing or 'cups' service is not running.
error: 'cups-client' package is missing or 'cups' service is not running.
error: 'libsane-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing or 'cups' service is not running.
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'libtool' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible
error: 'python-reportlab' package is missing/incompatible
ENTER SUDO PASSWORD
-------------------
Please enter the sudoer (mike)'s password:
Do you want to update repository and Install missing/incompatible packages. (a=install all*, c=custom_install, s=skip):a
Updating repository
-------------------
cmd =sudo dpkg --configure -a
cmd =sudo apt-get install --yes --force-yes -f
cmd =sudo apt-get update
Installing Missing/Incompatible packages
----------------------------------------
cmd =sudo apt-get install --assume-yes python-reportlab
cmd =sudo apt-get install --assume-yes libcups2-dev
cmd =sudo apt-get install --assume-yes libjpeg8-dev
error: Failed to install 'libjpeg8-dev' package, please install manually.
cmd =sudo apt-get install --assume-yes libsane-dev
cmd =sudo apt-get install --assume-yes libsnmp-dev
cmd =sudo apt-get install --assume-yes libcupsimage2-dev
cmd =sudo apt-get install --assume-yes openssl
cmd =sudo apt-get install --assume-yes libdbus-1-dev
cmd =sudo apt-get install --assume-yes cups-bsd
cmd =sudo apt-get install --assume-yes libcups2
cmd =sudo apt-get install --assume-yes cups-client
cmd =sudo apt-get install --assume-yes snmp-mibs-downloader
cmd =sudo apt-get install --assume-yes xsane
cmd =sudo apt-get install --assume-yes libtool
cmd =sudo apt-get install --assume-yes python-dev
cmd =sudo apt-get install --assume-yes libusb-1.0.0-dev
Checking Permissions....
Permissions are correct.
Checking for Configured Queues....
No Queue added
warning: No Queue(s) configured.
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Diagnose completed...
More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
Please close this terminal manually.
???
