Dernier message de la page précédente :
Salut,Si c'est pour modifier la signature :
Dernier message de la page précédente :
Salut,on s'oriente plus vers un pb disk alors, moins rigolo... il est déjà agé... peut être en fin de vie... On verra les badbloksSkipperzen a écrit : ↑ven. 22 mars 2019 20:11non ça ne plante pas specialement avec lecture de vidéos ...
Non rien a voir avec le noyau. Il ne peut pas intervenir à ce moment, vu qu'il n'est pas démarré.Skipperzen a écrit : ↑ven. 22 mars 2019 23:33impossible de booter ni sur le lecteur cd ni clé usb. Cela peut t il a voir avec le changement de kernel?
Du coup même pas besoin de modifier le bios, F12 te donne la liste des périphériques bootables, et il n' y a plus qu'a choisir.Pour changer de périphérique d’amorçage sans accéder au BIOS SETUP, appuyez sur F12 pendant le démarrage pour
accéder au menu multi-amorçage.
Code : Tout sélectionner
mint mint # smartctl -i /dev/sda6
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: 6VEMNZRB
LU WWN Device Id: 5 000c50 032d17c00
Firmware Version: 0001SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Mar 23 19:04:49 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
mint mint # smartctl -H /dev/sda6
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
mint mint # smartctl -l selftest /dev/sda6
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9724 -
mint mint # smartctl -t long /dev/sda6
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 143 minutes for test to complete.
Test will complete after Sat Mar 23 21:38:09 2019
Use smartctl -X to abort test.
mint mint # smartctl -s on -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 247) Self-test routine in progress...
70% of test remaining.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 143) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 086 006 Pre-fail Always - 219370972
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 090 090 020 Old_age Always - 11015
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 223280342
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13776
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 093 093 020 Old_age Always - 7682
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 327
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 70
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 048 046 045 Old_age Always - 52 (Min/Max 26/54)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 104
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 208
193 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 70738
194 Temperature_Celsius 0x0022 052 054 000 Old_age Always - 52 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x001a 051 050 000 Old_age Always - 219370972
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 324 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 324 occurred at disk power-on lifetime: 6357 hours (264 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:08:38.995 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:08:38.995 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:08:38.994 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:08:38.994 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:08:38.993 READ FPDMA QUEUED
Error 323 occurred at disk power-on lifetime: 3311 hours (137 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 e4 2c e1 04 Error: UNC at LBA = 0x04e12ce4 = 81865956
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 60 ff ff ff 4f 00 02:46:38.605 READ FPDMA QUEUED
60 00 30 b8 2c e1 44 00 02:46:38.604 READ FPDMA QUEUED
ef 10 03 00 00 00 00 00 02:46:38.603 SET FEATURES [Enable SATA feature]
ef 02 00 00 00 00 00 00 02:46:38.505 SET FEATURES [Enable write cache]
00 00 00 00 00 00 00 ff 02:46:38.455 NOP [Abort queued commands]
Error 322 occurred at disk power-on lifetime: 3311 hours (137 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 e4 2c e1 04 Error: WP at LBA = 0x04e12ce4 = 81865956
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 48 b7 3e 42 00 02:46:36.020 WRITE FPDMA QUEUED
61 00 08 58 b7 3e 42 00 02:46:36.019 WRITE FPDMA QUEUED
60 00 30 b8 2c e1 44 00 02:46:36.019 READ FPDMA QUEUED
61 00 10 d0 f7 3e 42 00 02:46:36.019 WRITE FPDMA QUEUED
60 00 f0 ff ff ff 4f 00 02:46:36.018 READ FPDMA QUEUED
Error 321 occurred at disk power-on lifetime: 3311 hours (137 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 e4 2c e1 04 Error: UNC at LBA = 0x04e12ce4 = 81865956
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 f0 ff ff ff 4f 00 02:46:33.368 READ FPDMA QUEUED
61 00 08 c8 ad e3 41 00 02:46:33.336 WRITE FPDMA QUEUED
61 00 08 00 2b e3 41 00 02:46:33.336 WRITE FPDMA QUEUED
61 00 08 50 b7 3e 42 00 02:46:33.335 WRITE FPDMA QUEUED
61 00 18 b8 f7 3e 42 00 02:46:33.334 WRITE FPDMA QUEUED
Error 320 occurred at disk power-on lifetime: 3311 hours (137 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 e4 2c e1 04 Error: UNC at LBA = 0x04e12ce4 = 81865956
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 02:46:30.781 READ FPDMA QUEUED
60 00 e0 ff ff ff 4f 00 02:46:30.781 READ FPDMA QUEUED
60 00 30 b8 2c e1 44 00 02:46:30.779 READ FPDMA QUEUED
ef 10 03 00 00 00 00 00 02:46:30.779 SET FEATURES [Enable SATA feature]
ef 02 00 00 00 00 00 00 02:46:30.768 SET FEATURES [Enable write cache]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 70% 13776 -
# 2 Short offline Completed without error 00% 9724 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 13777 -
# 2 Short offline Completed without error 00% 9724 -
Hum, hum! Peut être bien...Skipperzen a écrit : ↑sam. 23 mars 2019 23:08Ps pas de plantage aujourd'hui ! suis sous mint 18.3 sur clé usb Un rapport quelconque ?
En fait le bios voyait bien ta clé, il bootait bien dessus, mais l'OS live ne démarrait pas, peut être même que ça plantaitSkipperzen a écrit : ↑ven. 22 mars 2019 23:33MAIS impossible de booter ni sur le lecteur cd ni clé usb pourtant dans le bios l'ordre est bien apparent cd puis usb puis disque dur
Code : Tout sélectionner
mint@mint ~ $ sudo badblocks -v /dev/sda > badblocks.text
Checking blocks 0 to 488386583
Checking for bad blocks (read-only test): done
Pass completed, 0 bad blocks found. (0/0/0 errors)
mint@mint ~ $
étrange, sur la doc F2 = setup ==> accès au bios et F12 = boot menu....J'ai peut être pas lu la bonne doc