Résolu le 27-03-20 Plus de 25 minutes pour démarrer !!!

Assistance concernant Linux Mint
franck
Messages : 155
Enregistré le : ven. 25 oct. 2019 20:09

Plus de 25 minutes pour démarrer !!!

Message par franck »

Bonjour,

Le démarrage de LinuxMint est très long, plus de 25 minutes !!!

Ce n'est que lorsque l'ordinateur est éteint et que je le mets en marche.
Si je passe par le bios, le démarrage est normal. Quand je fais un Menu>Quitter>Redémarrer, même chose.

Je vous donne les retours des commandes "systemd-analyze" et "systemd-analyze blame" :

Code : Tout sélectionner

franck@franck-T200TA:~$ sudo systemd-analyze
[sudo] Mot de passe de franck :           
Startup finished in 2.515s (firmware) + 26min 10.142s (loader) + 7.826s (kernel) + 3.981s (userspace) = 26min 24.467s
graphical.target reached after 3.950s in userspace

Code : Tout sélectionner

franck@franck-T200TA:~$ systemd-analyze blame
          1.872s systemd-journal-flush.service
          1.752s lvm2-monitor.service
          1.145s dev-mmcblk2p2.device
           838ms ubuntu-system-adjustments.service
           764ms networkd-dispatcher.service
           611ms upower.service
           572ms udisks2.service
           549ms systemd-rfkill.service
           522ms NetworkManager.service
           458ms accounts-daemon.service
           452ms grub-common.service
           427ms systemd-udev-trigger.service
           419ms systemd-resolved.service
           386ms ModemManager.service
           379ms keyboard-setup.service
           376ms bluetooth.service
           354ms networking.service
           337ms systemd-logind.service
           320ms hddtemp.service
           283ms lightdm.service
           276ms gpu-manager.service
           270ms apparmor.service
           270ms thermald.service
log file: ystemd-analyze blamesystemd-analyze blame
Je vous remercie pour votre aide.
Desktop Dell Optiplex 790 (2012)_LMDE 6 Xfce-64 bit
CPU : Intel Core i5-2400_RAM : 8 Go_SSD 240 Go (LM) + DD 750 Go (Data)
________________________________________________________________________________________
Laptop Dell Latitude E5540 (2014)_LMDE 6 Xfce-64 Bit
CPU : Intel Core i5-4210U_RAM : 4 Go_SSD 128 Go
________________________________________________________________________________________

Avatar du membre
cyrille
Administrateur du site
Messages : 13037
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Plus de 25 minutes pour démarrer !!!

Message par cyrille »

verifier les sorties de

Code : Tout sélectionner

sudo dmesg
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

franck
Messages : 155
Enregistré le : ven. 25 oct. 2019 20:09

Re: Plus de 25 minutes pour démarrer !!!

Message par franck »

Bonjour,

Merci pour le coup de main.

Code : Tout sélectionner

franck@franck-T200TA:~$ sudo dmesg
[sudo] Mot de passe de franck :           
[    0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
[    0.000000] Linux version 5.3.0-28-generic (buildd@lcy01-amd64-009) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 (Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-28-generic root=UUID=f1950252-bbc9-40f3-be4a-6d5eae532dce ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078e31fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078e32000-0x0000000078e61fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078e62000-0x0000000078e90fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000078e91000-0x000000007947bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007947c000-0x0000000079b45fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079b46000-0x0000000079b97fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079b98000-0x0000000079bb2fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079bb3000-0x0000000079bb3fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079bb4000-0x0000000079bb4fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079bb5000-0x0000000079bb5fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079bb6000-0x0000000079d2cfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079d2d000-0x0000000079ff8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079ff9000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x78e90000  ACPI 2.0=0x78e90014  ESRT=0x78e61000  SMBIOS=0x79bb5290 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. T200TA/T200TA, BIOS T200TA.203 06/27/2014
[    0.000000] tsc: Detected 1466.300 MHz processor
[    0.000032] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000038] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000057] last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.000065] MTRR default type: uncachable
[    0.000068] MTRR fixed ranges enabled:
[    0.000071]   00000-9FFFF write-back
[    0.000075]   A0000-FFFFF write-protect
[    0.000078] MTRR variable ranges enabled:
[    0.000082]   0 base 000000000 mask FC0000000 write-back
[    0.000086]   1 base 040000000 mask FE0000000 write-back
[    0.000089]   2 base 060000000 mask FF0000000 write-back
[    0.000093]   3 base 070000000 mask FF8000000 write-back
[    0.000097]   4 base 070000000 mask FF8000000 write-back
[    0.000100]   5 base 078000000 mask FFC000000 write-back
[    0.000104]   6 base 07B000000 mask FFF000000 uncachable
[    0.000107]   7 base 07AE00000 mask FFFE00000 uncachable
[    0.000226] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000326] total RAM covered: 1966M
[    0.001632] Found optimal setting for mtrr clean up
[    0.001635]  gran_size: 64K 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 0G
[    0.010809] esrt: ESRT header is not in the memory map.
[    0.010835] check: Scanning 1 areas for low memory corruption
[    0.010850] BRK [0x1ee01000, 0x1ee01fff] PGTABLE
[    0.010855] BRK [0x1ee02000, 0x1ee02fff] PGTABLE
[    0.010858] BRK [0x1ee03000, 0x1ee03fff] PGTABLE
[    0.010995] BRK [0x1ee04000, 0x1ee04fff] PGTABLE
[    0.011000] BRK [0x1ee05000, 0x1ee05fff] PGTABLE
[    0.011500] BRK [0x1ee06000, 0x1ee06fff] PGTABLE
[    0.011734] BRK [0x1ee07000, 0x1ee07fff] PGTABLE
[    0.012008] BRK [0x1ee08000, 0x1ee08fff] PGTABLE
[    0.012202] BRK [0x1ee09000, 0x1ee09fff] PGTABLE
[    0.012379] BRK [0x1ee0a000, 0x1ee0afff] PGTABLE
[    0.012467] RAMDISK: [mem 0x2fc7b000-0x33e34fff]
[    0.012489] ACPI: Early table checksum verification disabled
[    0.012498] ACPI: RSDP 0x0000000078E90014 000024 (v02 _ASUS_)
[    0.012507] ACPI: XSDT 0x0000000078E8F0E8 0000CC (v01 _ASUS_ Notebook 00000003 MSFT 0100000D)
[    0.012522] ACPI: FACP 0x0000000078E8C000 00010C (v05 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.012537] ACPI: DSDT 0x0000000078E73000 00FD07 (v02 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.012548] ACPI: TCPA 0x0000000078E8E000 000032 (v02                 00000000      00000000)
[    0.012558] ACPI: UEFI 0x0000000079415000 000042 (v01 _ASUS_ Notebook 00000000      00000000)
[    0.012568] ACPI: DBG2 0x0000000078E8D000 000072 (v00 _ASUS_ INTLDBG2 00000003 AMI  0100000D)
[    0.012578] ACPI: HPET 0x0000000078E8B000 000038 (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.012588] ACPI: LPIT 0x0000000078E8A000 000104 (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.012598] ACPI: APIC 0x0000000078E89000 00006C (v03 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.012607] ACPI: MCFG 0x0000000078E88000 00003C (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.012617] ACPI: SSDT 0x0000000078E87000 0005FB (v01 _ASUS_ CpuDptf  00000003 AMI  0100000D)
[    0.012627] ACPI: SSDT 0x0000000078E85000 001AF2 (v01 _ASUS_ DptfTab  00000003 AMI  0100000D)
[    0.012637] ACPI: SSDT 0x0000000078E84000 000058 (v01 _ASUS_ LowPwrM  00000003 AMI  0100000D)
[    0.012647] ACPI: SSDT 0x0000000078E83000 0000FF (v01 _ASUS_ SoCDptf  00000003 AMI  0100000D)
[    0.012657] ACPI: FPDT 0x0000000078E72000 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012667] ACPI: SSDT 0x0000000078E71000 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.012677] ACPI: SSDT 0x0000000078E70000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.012687] ACPI: SSDT 0x0000000078E6F000 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.012697] ACPI: SSDT 0x0000000078E6E000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.012706] ACPI: TPM2 0x0000000078E6D000 000034 (v03                 00000000      00000000)
[    0.012716] ACPI: BGRT 0x0000000078E6C000 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.012726] ACPI: CSRT 0x0000000078E6B000 00014C (v00 _ASUS_ Notebook 00000005 MSFT 0100000D)
[    0.012736] ACPI: MSDM 0x0000000078E60F90 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.012764] ACPI: Local APIC address 0xfee00000
[    0.013037] No NUMA configuration found
[    0.013041] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[    0.013068] NODE_DATA(0) allocated [mem 0x78c32000-0x78c5cfff]
[    0.013961] Zone ranges:
[    0.013964]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013968]   DMA32    [mem 0x0000000001000000-0x0000000079ffffff]
[    0.013971]   Normal   empty
[    0.013974]   Device   empty
[    0.013977] Movable zone start for each node
[    0.013987] Early memory node ranges
[    0.013989]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.013993]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.013995]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.013998]   node   0: [mem 0x0000000020100000-0x0000000078e31fff]
[    0.014001]   node   0: [mem 0x0000000079b98000-0x0000000079bb2fff]
[    0.014004]   node   0: [mem 0x0000000079bb4000-0x0000000079bb4fff]
[    0.014006]   node   0: [mem 0x0000000079bb6000-0x0000000079d2cfff]
[    0.014009]   node   0: [mem 0x0000000079ff9000-0x0000000079ffffff]
[    0.014122] Zeroed struct page in unavailable ranges: 4504 pages
[    0.014126] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[    0.014131] On node 0 totalpages: 495208
[    0.014134]   DMA zone: 64 pages used for memmap
[    0.014136]   DMA zone: 142 pages reserved
[    0.014139]   DMA zone: 3996 pages, LIFO batch:0
[    0.014314]   DMA32 zone: 7744 pages used for memmap
[    0.014316]   DMA32 zone: 491212 pages, LIFO batch:63
[    0.034693] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.034706] Reserving Intel graphics memory at [mem 0x7af00000-0x7eefffff]
[    0.034776] ACPI: Local APIC address 0xfee00000
[    0.034812] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[    0.034820] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.034825] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.034831] Using ACPI (MADT) for SMP configuration information
[    0.034835] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.034863] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.034939] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.034945] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.034951] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.034954] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.034960] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.034966] PM: Registered nosave memory: [mem 0x78e32000-0x78e61fff]
[    0.034968] PM: Registered nosave memory: [mem 0x78e62000-0x78e90fff]
[    0.034970] PM: Registered nosave memory: [mem 0x78e91000-0x7947bfff]
[    0.034973] PM: Registered nosave memory: [mem 0x7947c000-0x79b45fff]
[    0.034975] PM: Registered nosave memory: [mem 0x79b46000-0x79b97fff]
[    0.034981] PM: Registered nosave memory: [mem 0x79bb3000-0x79bb3fff]
[    0.034987] PM: Registered nosave memory: [mem 0x79bb5000-0x79bb5fff]
[    0.034993] PM: Registered nosave memory: [mem 0x79d2d000-0x79ff8fff]
[    0.034999] [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[    0.035002] Booting paravirtualized kernel on bare hardware
[    0.035010] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.035032] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.036001] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.036027] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.036031] pcpu-alloc: [0] 0 1 2 3 
[    0.036137] Built 1 zonelists, mobility grouping on.  Total pages: 487258
[    0.036140] Policy zone: DMA32
[    0.036145] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-28-generic root=UUID=f1950252-bbc9-40f3-be4a-6d5eae532dce ro quiet splash vt.handoff=1
[    0.036961] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.037303] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.037399] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.037406] Calgary: detecting Calgary via BIOS EBDA area
[    0.037410] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.053034] Memory: 1770980K/1980832K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 209852K reserved, 0K cma-reserved)
[    0.053579] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.053617] Kernel/User page tables isolation: enabled
[    0.053660] ftrace: allocating 42927 entries in 168 pages
[    0.088686] rcu: Hierarchical RCU implementation.
[    0.088691] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.088693] 	Tasks RCU enabled.
[    0.088696] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.088698] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.100836] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 0
[    0.101083] random: crng done (trusting CPU's manufacturer)
[    0.101162] vt handoff: transparent VT on vt#1
[    0.101182] Console: colour dummy device 80x25
[    0.101191] printk: console [tty0] enabled
[    0.101246] ACPI: Core revision 20190703
[    0.101683] APIC: Switch to symmetric I/O mode setup
[    0.101739] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1522c79555f, max_idle_ns: 440795265300 ns
[    0.101753] Calibrating delay loop (skipped), value calculated using timer frequency.. 2932.60 BogoMIPS (lpj=5865200)
[    0.101759] pid_max: default: 32768 minimum: 301
[    0.105745] LSM: Security Framework initializing
[    0.105745] Yama: becoming mindful.
[    0.105745] AppArmor: AppArmor initialized
[    0.105745] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.105745] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.105745] *** VALIDATE proc ***
[    0.105745] *** VALIDATE cgroup1 ***
[    0.105745] *** VALIDATE cgroup2 ***
[    0.105745] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.105745] process: using mwait in idle threads
[    0.105745] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.105745] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.105745] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.105745] Spectre V2 : Mitigation: Full generic retpoline
[    0.105745] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.105745] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.105745] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.105745] MDS: Mitigation: Clear CPU buffers
[    0.105745] Freeing SMP alternatives memory: 40K
[    0.105745] TSC deadline timer enabled
[    0.105745] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3775  @ 1.46GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.105745] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.105745] ... version:                3
[    0.105745] ... bit width:              40
[    0.105745] ... generic registers:      2
[    0.105745] ... value mask:             000000ffffffffff
[    0.105745] ... max period:             0000007fffffffff
[    0.105745] ... fixed-purpose events:   3
[    0.105745] ... event mask:             0000000700000003
[    0.105745] rcu: Hierarchical SRCU implementation.
[    0.105745] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.105745] smp: Bringing up secondary CPUs ...
[    0.105745] x86: Booting SMP configuration:
[    0.105745] .... node  #0, CPUs:      #1 #2 #3
[    0.110366] smp: Brought up 1 node, 4 CPUs
[    0.110366] smpboot: Max logical packages: 1
[    0.110366] smpboot: Total of 4 processors activated (11730.40 BogoMIPS)
[    0.110904] devtmpfs: initialized
[    0.110904] x86/mm: Memory block size: 128MB
[    0.110904] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.110904] PM: Registering ACPI NVS region [mem 0x78e91000-0x7947bfff] (6205440 bytes)
[    0.110904] PM: Registering ACPI NVS region [mem 0x79d2d000-0x79ff8fff] (2932736 bytes)
[    0.114059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.114059] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.114080] pinctrl core: initialized pinctrl subsystem
[    0.114393] PM: RTC time: 16:28:49, date: 2020-02-01
[    0.114806] NET: Registered protocol family 16
[    0.114979] audit: initializing netlink subsys (disabled)
[    0.115035] audit: type=2000 audit(1580574529.012:1): state=initialized audit_enabled=0 res=1
[    0.115035] EISA bus registered
[    0.115035] cpuidle: using governor ladder
[    0.115035] cpuidle: using governor menu
[    0.115035] ACPI: bus type PCI registered
[    0.115035] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.115035] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.115035] PCI: not using MMCONFIG
[    0.115035] PCI: Using configuration type 1 for base access
[    0.115221] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.121900] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130102] ACPI: Added _OSI(Module Device)
[    0.130105] ACPI: Added _OSI(Processor Device)
[    0.130107] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.130109] ACPI: Added _OSI(Processor Aggregator Device)
[    0.130113] ACPI: Added _OSI(Linux-Dell-Video)
[    0.130116] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.130119] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.186725] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.197286] ACPI: Dynamic OEM Table Load:
[    0.197310] ACPI: SSDT 0xFFFF94E1360F7C00 00037A (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.197590] ACPI: Dynamic OEM Table Load:
[    0.197609] ACPI: SSDT 0xFFFF94E131B09800 000442 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.202357] ACPI: Dynamic OEM Table Load:
[    0.202373] ACPI: SSDT 0xFFFF94E1360BCE00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.205593] ACPI: Dynamic OEM Table Load:
[    0.205609] ACPI: SSDT 0xFFFF94E131AF7C00 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.213894] ACPI: Interpreter enabled
[    0.213950] ACPI: (supports S0)
[    0.213954] ACPI: Using IOAPIC for interrupt routing
[    0.214084] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.232381] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[    0.232386] PCI: not using MMCONFIG
[    0.232396] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.240822] ACPI: Power Resource [USBC] (on)
[    0.252566] ACPI: Power Resource [PLPE] (on)
[    0.267051] ACPI: Power Resource [CLK0] (on)
[    0.267216] ACPI: Power Resource [CLK1] (on)
[    0.267664] ACPI: Power Resource [P28X] (off)
[    0.267836] ACPI: Power Resource [P18X] (off)
[    0.270642] ACPI: Power Resource [TCPR] (off)
[    0.274664] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.283100] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.283118] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.283353] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.283402] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.285086] PCI host bridge to bus 0000:00
[    0.285093] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.285098] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.285103] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.285107] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.285111] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.285115] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.285119] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.285123] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.285127] pci_bus 0000:00: root bus resource [mem 0x7af00001-0x7ef00000 window]
[    0.285131] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[    0.285135] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.285140] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.285169] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.285519] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.285541] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.285556] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.285570] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.285601] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.285938] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.285967] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[    0.286049] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.286349] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.286380] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[    0.286394] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[    0.286496] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.286797] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.288449] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.288800] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.289150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.289500] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.289856] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.290206] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.290557] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.290908] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.294649] gpio gpiochip1: (INT33FC:01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.295125] gpio gpiochip2: (INT33FC:02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[    0.314396] SCSI subsystem initialized
[    0.314437] libata version 3.00 loaded.
[    0.314437] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.314437] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.314437] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.314437] vgaarb: loaded
[    0.314437] ACPI: bus type USB registered
[    0.314437] usbcore: registered new interface driver usbfs
[    0.314437] usbcore: registered new interface driver hub
[    0.314437] usbcore: registered new device driver usb
[    0.604803] pps_core: LinuxPPS API ver. 1 registered
[    0.604806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.604816] PTP clock support registered
[    0.604882] EDAC MC: Ver: 3.0.0
[    0.604882] Registered efivars operations
[    0.604882] PCI: Using ACPI for IRQ routing
[    0.604882] PCI: pci_cache_line_size set to 64 bytes
[    0.604882] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.604882] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.604882] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.604882] e820: reserve RAM buffer [mem 0x78e32000-0x7bffffff]
[    0.604882] e820: reserve RAM buffer [mem 0x79bb3000-0x7bffffff]
[    0.604882] e820: reserve RAM buffer [mem 0x79bb5000-0x7bffffff]
[    0.604882] e820: reserve RAM buffer [mem 0x79d2d000-0x7bffffff]
[    0.604882] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    0.606018] NetLabel: Initializing
[    0.606021] NetLabel:  domain hash size = 128
[    0.606023] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.606078] NetLabel:  unlabeled traffic allowed by default
[    0.607526] clocksource: Switched to clocksource tsc-early
[    0.647568] VFS: Disk quotas dquot_6.6.0
[    0.647615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.647700] *** VALIDATE hugetlbfs ***
[    0.647981] AppArmor: AppArmor Filesystem Enabled
[    0.648091] pnp: PnP ACPI init
[    0.648279] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.648998] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.649004] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.649008] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.649013] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.649018] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.649033] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.651289] system 00:02: [io  0x0240-0x0259] has been reserved
[    0.651305] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.662379] pnp: PnP ACPI: found 3 devices
[    0.668116] thermal_sys: Registered thermal governor 'fair_share'
[    0.668119] thermal_sys: Registered thermal governor 'bang_bang'
[    0.668122] thermal_sys: Registered thermal governor 'step_wise'
[    0.668124] thermal_sys: Registered thermal governor 'user_space'
[    0.668126] thermal_sys: Registered thermal governor 'power_allocator'
[    0.668287] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.668292] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.668297] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.668301] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.668305] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.668309] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.668313] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.668317] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[    0.668321] pci_bus 0000:00: resource 12 [mem 0x7af00001-0x7ef00000 window]
[    0.668325] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[    0.668329] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.668617] NET: Registered protocol family 2
[    0.669023] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.669079] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.669224] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.669328] TCP: Hash tables configured (established 16384 bind 16384)
[    0.669431] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.669466] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.669724] NET: Registered protocol family 1
[    0.669741] NET: Registered protocol family 44
[    0.669800] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.670333] PCI: CLS 0 bytes, default 64
[    0.670487] Trying to unpack rootfs image as initramfs...
[    2.954390] Freeing initrd memory: 67304K
[    2.954568] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1522c79555f, max_idle_ns: 440795265300 ns
[    2.954609] clocksource: Switched to clocksource tsc
[    2.954830] check: Scanning for low memory corruption every 60 seconds
[    2.960321] Initialise system trusted keyrings
[    2.960361] Key type blacklist registered
[    2.960481] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    2.965408] zbud: loaded
[    2.966725] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.967304] fuse: init (API version 7.31)
[    2.967693] Platform Keyring initialized
[    2.979673] Key type asymmetric registered
[    2.979677] Asymmetric key parser 'x509' registered
[    2.979714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.979856] io scheduler mq-deadline registered
[    2.980395] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.980631] efifb: probing for efifb
[    2.980669] efifb: showing boot graphics
[    2.983447] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    2.983451] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    2.983452] efifb: scrolling: redraw
[    2.983455] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.983591] fbcon: Deferring console take-over
[    2.983594] fb0: EFI VGA frame buffer device
[    2.983620] intel_idle: MWAIT substates: 0x33000020
[    2.983623] intel_idle: v0.4.1 model 0x37
[    2.984263] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.011275] ACPI: AC Adapter [ADP1] (on-line)
[    3.011534] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    3.011552] ACPI: Lid Switch [LID]
[    3.011652] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    3.011679] ACPI: Sleep Button [SLPB]
[    3.021517] [Firmware Bug]: No valid trip found
[    3.022365] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.042709] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.050922] hpet: number irqs doesn't agree with number of timers
[    3.051102] Linux agpgart interface v0.103
[    3.066078] battery: ACPI: Battery Slot [BATC] (battery present)
[    3.100377] loop: module loaded
[    3.122471] libphy: Fixed MDIO Bus: probed
[    3.122475] tun: Universal TUN/TAP device driver, 1.6
[    3.123726] PPP generic driver version 2.4.2
[    3.125240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.125260] ehci-pci: EHCI PCI platform driver
[    3.125315] ehci-platform: EHCI generic platform driver
[    3.125382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.125390] ohci-pci: OHCI PCI platform driver
[    3.125414] ohci-platform: OHCI generic platform driver
[    3.125444] uhci_hcd: USB Universal Host Controller Interface driver
[    3.125931] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.125949] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.127067] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    3.127075] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.127465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    3.127470] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.127473] usb usb1: Product: xHCI Host Controller
[    3.127477] usb usb1: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[    3.127480] usb usb1: SerialNumber: 0000:00:14.0
[    3.129047] hub 1-0:1.0: USB hub found
[    3.129078] hub 1-0:1.0: 6 ports detected
[    3.130712] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.130724] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.130736] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    3.130873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    3.130878] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.130881] usb usb2: Product: xHCI Host Controller
[    3.130885] usb usb2: Manufacturer: Linux 5.3.0-28-generic xhci-hcd
[    3.130888] usb usb2: SerialNumber: 0000:00:14.0
[    3.132467] hub 2-0:1.0: USB hub found
[    3.132505] hub 2-0:1.0: 1 port detected
[    3.132849] i8042: PNP: No PS/2 controller found.
[    3.135706] mousedev: PS/2 mouse device common for all mice
[    3.138524] rtc_cmos 00:00: registered as rtc0
[    3.138601] rtc_cmos 00:00: no alarms, 242 bytes nvram
[    3.138630] i2c /dev entries driver
[    3.142386] device-mapper: uevent: version 1.0.3
[    3.143916] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    3.144080] platform eisa.0: Probing EISA bus 0
[    3.144086] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    3.144091] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.144094] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.144098] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.144102] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.144105] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.144109] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.144113] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.144116] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.144120] platform eisa.0: EISA: Detected 0 cards
[    3.144130] intel_pstate: Intel P-state driver initializing
[    3.146940] ledtrig-cpu: registered to indicate activity on CPUs
[    3.146954] EFI Variables Facility v0.08 2004-May-17
[    3.152903] NET: Registered protocol family 10
[    3.177691] Segment Routing with IPv6
[    3.177780] NET: Registered protocol family 17
[    3.178668] Key type dns_resolver registered
[    3.181637] RAS: Correctable Errors collector initialized.
[    3.181733] microcode: sig=0x30678, pf=0x2, revision=0x838
[    3.182615] microcode: Microcode Update Driver: v2.2.
[    3.182648] sched_clock: Marking stable (3181765886, 827989)->(3199814253, -17220378)
[    3.184703] registered taskstats version 1
[    3.184729] Loading compiled-in X.509 certificates
[    3.191065] Loaded X.509 cert 'Build time autogenerated kernel key: c209d4e4513ddb6584e17c46859deb0bc3f91652'
[    3.191182] zswap: loaded using pool lzo/zbud
[    3.220701] Key type big_key registered
[    3.220722] Key type trusted registered
[    3.236824] Key type encrypted registered
[    3.236840] AppArmor: AppArmor sha1 policy hashing enabled
[    3.237454] integrity: Loading X.509 certificate: UEFI:db
[    3.243787] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    3.243792] integrity: Loading X.509 certificate: UEFI:db
[    3.244559] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    3.244561] integrity: Loading X.509 certificate: UEFI:db
[    3.244610] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    3.244612] integrity: Loading X.509 certificate: UEFI:db
[    3.244655] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    3.244656] integrity: Loading X.509 certificate: UEFI:db
[    3.245172] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    3.246148] ima: Allocated hash algorithm: sha1
[    3.302250] No architecture policies found
[    3.302295] evm: Initialising EVM extended attributes:
[    3.302299] evm: security.selinux
[    3.302300] evm: security.SMACK64
[    3.302302] evm: security.SMACK64EXEC
[    3.302303] evm: security.SMACK64TRANSMUTE
[    3.302305] evm: security.SMACK64MMAP
[    3.302306] evm: security.apparmor
[    3.302307] evm: security.ima
[    3.302309] evm: security.capability
[    3.302311] evm: HMAC attrs: 0x1
[    3.303574] PM:   Magic number: 8:671:488
[    3.303743] regulator regulator.0: hash matches
[    3.304476] rtc_cmos 00:00: setting system clock to 2020-02-01T16:28:52 UTC (1580574532)
[    3.324471] Freeing unused decrypted memory: 2040K
[    3.326712] Freeing unused kernel image memory: 2660K
[    3.327448] Write protecting the kernel read-only data: 22528k
[    3.330245] Freeing unused kernel image memory: 2008K
[    3.332662] Freeing unused kernel image memory: 1476K
[    3.358221] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.358884] x86/mm: Checking user space page tables
[    3.383090] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.383095] Run /init as init process
[    3.478870] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    3.499851] usb 2-1: New USB device found, idVendor=0b05, idProduct=1801, bcdDevice= 1.00
[    3.499855] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    3.499858] usb 2-1: Product: ASM1074
[    3.499860] usb 2-1: Manufacturer: ASUS
[    3.501567] hub 2-1:1.0: USB hub found
[    3.501718] hub 2-1:1.0: 4 ports detected
[    3.502332] usb: port power management may be unreliable
[    3.626482] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    3.676387] sdhci: Secure Digital Host Controller Interface driver
[    3.676389] sdhci: Copyright(c) Pierre Ossman
[    3.678474] hidraw: raw HID events driver (C) Jiri Kosina
[    3.700121] mmc0: SDHCI controller on ACPI [80860F14:01] using ADMA
[    3.701537] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    3.702362] i2c_hid i2c-SIS0817:00: i2c-SIS0817:00 supply vdd not found, using dummy regulator
[    3.702395] i2c_hid i2c-SIS0817:00: i2c-SIS0817:00 supply vddl not found, using dummy regulator
[    3.721502] mmc2: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.765302] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.766936] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.768422] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.771113] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.788686] usb 1-3: New USB device found, idVendor=0b05, idProduct=17e0, bcdDevice= 2.59
[    3.788691] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.788694] usb 1-3: Product: ASUS Base Station.
[    3.788696] usb 1-3: Manufacturer: ASUSTek COMPUTER INC.
[    3.802087] checking generic (80000000 410000) vs hw (80000000 10000000)
[    3.802090] fb0: switching to inteldrmfb from EFI VGA
[    3.802299] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.802426] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.802428] [drm] Driver supports precise vblank timestamp query.
[    3.804446] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.833904] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[    3.840514] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    3.842791] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.843732] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    3.844113] [drm] HDaudio controller not detected, using LPE audio instead
[    3.849217] fbcon: i915drmfb (fb0) is primary device
[    3.849220] fbcon: Deferring console take-over
[    3.849225] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.870116] usb 2-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    3.893736] usb 2-1.2: New USB device found, idVendor=0b05, idProduct=1800, bcdDevice= 1.00
[    3.893742] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    3.893746] usb 2-1.2: Product: ASM1153
[    3.893812] usb 2-1.2: Manufacturer: ASUS
[    3.893816] usb 2-1.2: SerialNumber: 123456789012
[    3.906838] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    3.908100] scsi host0: usb-storage 2-1.2:1.0
[    3.908351] usbcore: registered new interface driver usb-storage
[    3.911511] usbcore: registered new interface driver uas
[    3.924357] input: SIS0817:00 0457:1084 Touchscreen as /devices/platform/80860F41:05/i2c-5/i2c-SIS0817:00/0018:0457:1084.0001/input/input3
[    3.924653] hid-generic 0018:0457:1084.0001: input,hidraw0: I2C HID v1.00 Device [SIS0817:00 0457:1084] on i2c-SIS0817:00
[    3.952627] mmc2: new HS200 MMC card at address 0001
[    3.953935] mmcblk2: mmc2:0001 HBG4e 29.1 GiB 
[    3.954646] mmcblk2boot0: mmc2:0001 HBG4e partition 1 4.00 MiB
[    3.955345] mmcblk2boot1: mmc2:0001 HBG4e partition 2 4.00 MiB
[    3.956098] mmcblk2rpmb: mmc2:0001 HBG4e partition 3 4.00 MiB, chardev (240:0)
[    3.961927]  mmcblk2: p1 p2
[    4.018279] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    4.173780] usb 1-4: New USB device found, idVendor=0b05, idProduct=1802, bcdDevice= 1.00
[    4.173786] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    4.173790] usb 1-4: Product: ASM1074
[    4.173793] usb 1-4: Manufacturer: ASUS
[    4.176641] hub 1-4:1.0: USB hub found
[    4.177058] hub 1-4:1.0: 4 ports detected
[    4.190523] input: ASUSTek COMPUTER INC. ASUS Base Station. as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0B05:17E0.0002/input/input5
[    4.251726] hid-generic 0003:0B05:17E0.0002: input,hidraw1: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station.] on usb-0000:00:14.0-3/input0
[    4.254323] input: ASUSTek COMPUTER INC. ASUS Base Station. Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input6
[    4.315974] input: ASUSTek COMPUTER INC. ASUS Base Station. System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input7
[    4.317447] input: ASUSTek COMPUTER INC. ASUS Base Station. Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input9
[    4.318331] hid-generic 0003:0B05:17E0.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station.] on usb-0000:00:14.0-3/input1
[    4.320728] input: ASUSTek COMPUTER INC. ASUS Base Station. Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:0B05:17E0.0004/input/input10
[    4.321509] hid-generic 0003:0B05:17E0.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station.] on usb-0000:00:14.0-3/input2
[    4.321635] usbcore: registered new interface driver usbhid
[    4.321638] usbhid: USB HID core driver
[    4.332573] asus_wmi: ASUS WMI generic driver loaded
[    4.388177] input: ASUSTek COMPUTER INC. ASUS Base Station. as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0B05:17E0.0002/input/input12
[    4.449228] asus 0003:0B05:17E0.0002: input,hidraw1: USB HID v1.11 Keyboard [ASUSTek COMPUTER INC. ASUS Base Station.] on usb-0000:00:14.0-3/input0
[    4.486433] usb 1-4.3: new high-speed USB device number 4 using xhci_hcd
[    4.560062] asus 0003:0B05:17E0.0003: Fixing up Asus T100 keyb report descriptor
[    4.560535] input: ASUSTek COMPUTER INC. ASUS Base Station. as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:0B05:17E0.0003/input/input13
[    4.603092] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    4.603098] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.603102] usb 1-4.3: Product: USB 10/100 LAN
[    4.603105] usb 1-4.3: Manufacturer: Realtek
[    4.603109] usb 1-4.3: SerialNumber: 40167E6B2A83
[    4.626336] asus 0003:0B05:17E0.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [ASUSTek COMPUTER INC. ASUS Base Station.] on usb-0000:00:14.0-3/input1
[    4.670341] input: ASUSTek COMPUTER INC. ASUS Base Station. as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:0B05:17E0.0004/input/input14
[    4.671975] asus 0003:0B05:17E0.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [ASUSTek COMPUTER INC. ASUS Base Station.] on usb-0000:00:14.0-3/input2
[    4.938292] scsi 0:0:0:0: Direct-Access     TOSHIBA  MQ01ABF050       0    PQ: 0 ANSI: 6
[    4.939114] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.939750] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.940700] sd 0:0:0:0: [sda] Write Protect is off
[    4.940705] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    4.940943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.424554]  sda: sda1
[    5.429922] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.674003] raid6: sse2x4   gen()  1344 MB/s
[    5.722451] raid6: sse2x4   xor()  1223 MB/s
[    5.770465] raid6: sse2x2   gen()  1180 MB/s
[    5.818449] raid6: sse2x2   xor()  2832 MB/s
[    5.866504] raid6: sse2x1   gen()  1368 MB/s
[    5.914455] raid6: sse2x1   xor()  2382 MB/s
[    5.914456] raid6: using algorithm sse2x1 gen() 1368 MB/s
[    5.914457] raid6: .... xor() 2382 MB/s, rmw enabled
[    5.914459] raid6: using ssse3x2 recovery algorithm
[    5.923710] xor: measuring software checksum speed
[    5.962453]    prefetch64-sse: 10427.000 MB/sec
[    6.002460]    generic_sse:  8324.000 MB/sec
[    6.002462] xor: using function: prefetch64-sse (10427.000 MB/sec)
[    6.045684] Btrfs loaded, crc32c=crc32c-intel
[    6.403002] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null)
[    6.852087] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.871435] systemd[1]: Detected architecture x86-64.
[    6.881628] systemd[1]: Set hostname to <franck-T200TA>.
[    7.165350] systemd[1]: Reached target System Time Synchronized.
[    7.165602] systemd[1]: Reached target User and Group Name Lookups.
[    7.166183] systemd[1]: Created slice User and Session Slice.
[    7.166750] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.166796] systemd[1]: Reached target Remote File Systems.
[    7.167271] systemd[1]: Created slice System Slice.
[    7.167537] systemd[1]: Listening on udev Control Socket.
[    7.248682] EXT4-fs (mmcblk2p2): re-mounted. Opts: errors=remount-ro
[    7.250770] lp: driver loaded but no devices found
[    7.265704] ppdev: user-space parallel port driver
[    7.499420] systemd-journald[436]: Received request to flush runtime journal from PID 1
[    7.537806] Adding 1392448k swap on /swapfile.  Priority:-2 extents:5 across:1425216k SSFS
[    7.834138] 80860F0A:00: ttyS4 at MMIO 0x9094d000 (irq = 17, base_baud = 2764800) is a 16550A
[    7.834334] serial serial0: tty port ttyS4 registered
[    7.854519] 80860F0A:01: ttyS5 at MMIO 0x90953000 (irq = 19, base_baud = 2764800) is a 16550A
[    7.854738] serial serial1: tty port ttyS5 registered
[    7.870029] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input15
[    7.948120] int3401 thermal INT3401:00: Creating sysfs group for PROC_THERMAL_PLATFORM_DEV
[    7.966147] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    7.999903] Bluetooth: Core ver 2.22
[    7.999942] NET: Registered protocol family 31
[    7.999943] Bluetooth: HCI device and connection manager initialized
[    7.999953] Bluetooth: HCI socket layer initialized
[    7.999956] Bluetooth: L2CAP socket layer initialized
[    7.999964] Bluetooth: SCO socket layer initialized
[    8.011800] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    8.014267] inv-mpu6050-i2c i2c-INVN6500:00: mounting matrix not found: using identity...
[    8.014277] inv-mpu6050-i2c i2c-INVN6500:00: i2c-INVN6500:00 supply vddio not found, using dummy regulator
[    8.050433] Bluetooth: HCI UART driver ver 2.3
[    8.050439] Bluetooth: HCI UART protocol H4 registered
[    8.050440] Bluetooth: HCI UART protocol BCSP registered
[    8.050473] Bluetooth: HCI UART protocol LL registered
[    8.050474] Bluetooth: HCI UART protocol ATH3K registered
[    8.050499] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.050646] Bluetooth: HCI UART protocol Intel registered
[    8.056421] Bluetooth: HCI UART protocol Broadcom registered
[    8.056448] Bluetooth: HCI UART protocol QCA registered
[    8.056450] Bluetooth: HCI UART protocol AG6XX registered
[    8.056467] Bluetooth: HCI UART protocol Marvell registered
[    8.069932] hci_uart_bcm serial0-0: ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low
[    8.070154] hci_uart_bcm serial0-0: serial0-0 supply vbat not found, using dummy regulator
[    8.070190] hci_uart_bcm serial0-0: serial0-0 supply vddio not found, using dummy regulator
[    8.121650] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[    8.121654] mei_txe 0000:00:1a.0: PCI INT A: not connected
[    8.151611] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input16
[    8.152916] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input17
[    8.214854] i2c i2c-4: Added multiplexed i2c bus 15
[    8.245200] intel_sst_acpi 80860F28:00: BYT-CR not detected
[    8.245399] intel_sst_acpi 80860F28:00: LPE base: 0x90a00000 size:0x200000
[    8.245401] intel_sst_acpi 80860F28:00: IRAM base: 0x90ac0000
[    8.245435] intel_sst_acpi 80860F28:00: DRAM base: 0x90b00000
[    8.245444] intel_sst_acpi 80860F28:00: SHIM base: 0x90b40000
[    8.245452] intel_sst_acpi 80860F28:00: Mailbox base: 0x90b44000
[    8.245460] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[    8.249827] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[    8.271099] Bluetooth: hci0: BCM: chip id 82
[    8.273181] Bluetooth: hci0: BCM: features 0x2f
[    8.275470] Bluetooth: hci0: BCM43341B0
[    8.275483] Bluetooth: hci0: BCM43341B0 (002.001.014) build 0000
[    8.329005] input: SIS0817:00 0457:1084 as /devices/platform/80860F41:05/i2c-5/i2c-SIS0817:00/0018:0457:1084.0001/input/input18
[    8.329292] hid-multitouch 0018:0457:1084.0001: input,hidraw0: I2C HID v1.00 Device [SIS0817:00 0457:1084] on i2c-SIS0817:00
[    8.377576] bluetooth hci0: Direct firmware load for brcm/BCM43341B0.hcd failed with error -2
[    8.377584] Bluetooth: hci0: BCM: Patch brcm/BCM43341B0.hcd not found
[    8.382146] asus_wmi: Initialization: 0x1
[    8.382372] asus_wmi: BIOS WMI version: 7.9
[    8.382504] asus_wmi: SFUN value: 0x37
[    8.382511] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[    8.382514] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[    8.393650] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[    8.397710] asus_wmi: Number of fans: 1
[    8.472654] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    8.473300] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    8.493220] usbcore: registered new interface driver r8152
[    8.538284] usbcore: registered new interface driver cdc_ether
[    8.583732] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    8.585269] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    8.586944] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    8.589825] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    8.590004] usb 1-4.3: reset high-speed USB device number 4 using xhci_hcd
[    8.596600] cryptd: max_cpu_qlen set to 1000
[    8.650598] SSE version of gcm_enc/dec engaged.
[    8.657992] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[    8.658827] usbcore: registered new interface driver brcmfmac
[    8.662762] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.ASUSTeK COMPUTER INC.-T200TA.txt failed with error -2
[    8.662802] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.txt failed with error -2
[    8.662935] brcmfmac: brcmf_fw_nvram_from_efi: Using nvram EFI variable
[    8.762717] r8152 1-4.3:1.0 eth0: v1.09.10
[    8.843421] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[    8.843483] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    8.844036] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43340/2 wl0: Feb 20 2015 12:54:17 version 6.10.190.55 (r536162) FWID 01-6cb01dcc
[    8.879265] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input21
[    8.880378] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input22
[    8.904889] intel_rapl_common: Found RAPL domain package
[    8.904894] intel_rapl_common: Found RAPL domain core
[    9.107567] bytcr_rt5640 bytcr_rt5640: quirk DMIC1_MAP enabled
[    9.107572] bytcr_rt5640 bytcr_rt5640: quirk realtek,jack-detect-source 3
[    9.107575] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-threshold-microamp 2000
[    9.107577] bytcr_rt5640 bytcr_rt5640: quirk realtek,over-current-scale-factor 1
[    9.107579] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[    9.125038] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[    9.125451] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[    9.129497] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp2-port mapping ok
[    9.146455] input: bytcr-rt5640 Headset as /devices/platform/80860F28:00/bytcr_rt5640/sound/card1/input23
[    9.189400] r8152 1-4.3:1.0 enx40167e6b2a83: renamed from eth0
[   10.564651] audit: type=1400 audit(1580574539.755:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=732 comm="apparmor_parser"
[   10.568105] audit: type=1400 audit(1580574539.759:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=729 comm="apparmor_parser"
[   10.568116] audit: type=1400 audit(1580574539.759:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=729 comm="apparmor_parser"
[   10.568121] audit: type=1400 audit(1580574539.759:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=729 comm="apparmor_parser"
[   10.568125] audit: type=1400 audit(1580574539.759:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=729 comm="apparmor_parser"
[   10.568188] audit: type=1400 audit(1580574539.759:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=733 comm="apparmor_parser"
[   10.568594] audit: type=1400 audit(1580574539.759:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=731 comm="apparmor_parser"
[   10.568602] audit: type=1400 audit(1580574539.759:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=731 comm="apparmor_parser"
[   10.568608] audit: type=1400 audit(1580574539.759:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=731 comm="apparmor_parser"
[   10.570277] audit: type=1400 audit(1580574539.763:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=728 comm="apparmor_parser"
[   10.980165] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.980168] Bluetooth: BNEP filters: protocol multicast
[   10.980179] Bluetooth: BNEP socket layer initialized
[   11.581942] r8152 1-4.3:1.0 enx40167e6b2a83: carrier on
[   11.638565] fbcon: Taking over console
[   11.648143] IPv6: ADDRCONF(NETDEV_CHANGE): enx40167e6b2a83: link becomes ready
[   11.670640] Console: switching to colour frame buffer device 170x48
[   19.224810] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.607384] x86/PAT: pulseaudio:1614 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   19.718584] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01
[   19.761711] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   19.831772] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   19.988589] x86/PAT: pulseaudio:1698 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   20.033323] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   20.121616] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   20.220105] Bluetooth: RFCOMM TTY layer initialized
[   20.220119] Bluetooth: RFCOMM socket layer initialized
[   20.220137] Bluetooth: RFCOMM ver 1.11
[   20.614895] x86/PAT: pulseaudio:1759 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   20.666426] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   20.796197] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   21.263052] x86/PAT: pulseaudio:1802 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   21.309427] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   21.442036] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   22.182664] x86/PAT: pulseaudio:1839 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   22.241091] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   22.319766] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   22.690945] x86/PAT: pulseaudio:1880 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   22.741263] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   22.824828] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   23.116895] x86/PAT: pulseaudio:1902 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   23.204541] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   23.696934] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   23.846858] x86/PAT: pulseaudio:1920 map pfn RAM range req uncached-minus for [mem 0x75e00000-0x75e56fff], got write-combining
[   23.925813] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[   24.035750] debugfs: File 'SSP2-Codec' in directory 'Baytrail Audio Port' already present!
[ 3402.919260] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
franck@franck-T200TA:~$
Desktop Dell Optiplex 790 (2012)_LMDE 6 Xfce-64 bit
CPU : Intel Core i5-2400_RAM : 8 Go_SSD 240 Go (LM) + DD 750 Go (Data)
________________________________________________________________________________________
Laptop Dell Latitude E5540 (2014)_LMDE 6 Xfce-64 Bit
CPU : Intel Core i5-4210U_RAM : 4 Go_SSD 128 Go
________________________________________________________________________________________

Avatar du membre
cyrille
Administrateur du site
Messages : 13037
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Plus de 25 minutes pour démarrer !!!

Message par cyrille »

Regarde la fin de ta sortie (pulse audio), tu auras des pistes de recherches ;)
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Avatar du membre
cyrille
Administrateur du site
Messages : 13037
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Plus de 25 minutes pour démarrer !!!

Message par cyrille »

Désolé j'avais pas vu, mais tu aurais pu faire le tri ;)

Code : Tout sélectionner

FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
T'as plus qu'à nettoyer ton disque ;)
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

franck
Messages : 155
Enregistré le : ven. 25 oct. 2019 20:09

Re: Plus de 25 minutes pour démarrer !!!

Message par franck »

LM n'est pas installé sur sda1 mais sur mmcblk2.
Desktop Dell Optiplex 790 (2012)_LMDE 6 Xfce-64 bit
CPU : Intel Core i5-2400_RAM : 8 Go_SSD 240 Go (LM) + DD 750 Go (Data)
________________________________________________________________________________________
Laptop Dell Latitude E5540 (2014)_LMDE 6 Xfce-64 Bit
CPU : Intel Core i5-4210U_RAM : 4 Go_SSD 128 Go
________________________________________________________________________________________

Avatar du membre
cyrille
Administrateur du site
Messages : 13037
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Plus de 25 minutes pour démarrer !!!

Message par cyrille »

Il quand meme embeté par ça
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
;)
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Avatar du membre
arghlub
Administrateur du site
Messages : 10376
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence

Re: Plus de 25 minutes pour démarrer !!!

Message par arghlub »

Salut,

donne le retour de tes disques montés (on a déjà vu ce cas ici si une partoche est mal désignée) :

Code : Tout sélectionner

sudo blkid -o list
et surtout :

Code : Tout sélectionner

cat /etc/fstab
;)
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre de l' April.org────────────────

franck
Messages : 155
Enregistré le : ven. 25 oct. 2019 20:09

Re: Plus de 25 minutes pour démarrer !!!

Message par franck »

Bonsoir,

J'ai fait un essai en démontant le disque sda1. C'est toujours pareil.

Dans le poste de travail, il y a 3 disques :
- mmcblk2 sur lequel est installé LinuxMint => Ok
- sda1 pour enregistrer mes données => Ok
- Disque sans nom (/dev/mmcblk2boot1) => :?:

Dans gnome-disk-utility, c'est pareil, 3 disques :
- /dev/mmcblk2 de 31 Go => Ok
- /dev/sda1 de 500 Go => Ok
- /dev/mmcblk2boot0 (lecture seule) de 4,2 Mo => :?:

Le retour des commandes :

Code : Tout sélectionner

franck@franck-T200TA:~$ sudo blkid -o list
[sudo] Mot de passe de franck :           
device     fs_type label    mount point    UUID
-------------------------------------------------------------------------------
/dev/mmcblk2p1
           vfat             /boot/efi      7CD2-548B
/dev/mmcblk2p2
           ext4             /              f1950252-bbc9-40f3-be4a-6d5eae532dce
/dev/sda1  vfat    DATA     /media/franck/DATA E9D7-A28F
/dev/mmcblk2
                            (utilisé)     
franck@franck-T200TA:~$ 

Code : Tout sélectionner

franck@franck-T200TA:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/mmcblk2p2 during installation
UUID=f1950252-bbc9-40f3-be4a-6d5eae532dce /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/mmcblk2p1 during installation
UUID=7CD2-548B  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
Desktop Dell Optiplex 790 (2012)_LMDE 6 Xfce-64 bit
CPU : Intel Core i5-2400_RAM : 8 Go_SSD 240 Go (LM) + DD 750 Go (Data)
________________________________________________________________________________________
Laptop Dell Latitude E5540 (2014)_LMDE 6 Xfce-64 Bit
CPU : Intel Core i5-4210U_RAM : 4 Go_SSD 128 Go
________________________________________________________________________________________

franck
Messages : 155
Enregistré le : ven. 25 oct. 2019 20:09

Re: Plus de 25 minutes pour démarrer !!!

Message par franck »

Bonjour,

Je viens de faire une énième installation de LinuxMint. Heureusement que je ne bosse pas dans une boutique d'informatique, on m'aurait viré depuis belle lurette !!! lol

C'est LinuxMint 19.2 64 bit. Avec le 19.3, le touchpad ne fonctionne pas correctement. sad

Avant l'installation, j'ai enlevé le disque dur du dock. Comme çà, il n’interférera pas. J'ai formaté l'eMMC (mmcblk2) en FAT32 avec GParted puis avec gnome-disk-utility (ceinture et bretelles) en sélectionnant l'option "Effacer".

Je commence l’installation :
- Je coche "Installer les logiciels tiers pour le matériel graphique et le Wifi, Flash, MP3 et autres supports
- Type d’installation : Effacer le disque et installer Linux Mint
- Création et formatage de 2 partitions, ESP et ext4, sur mmcblk2,

Une fois l'installation terminée, le redémarrage est très long (environ 25-30 minutes) avec la clé bootable branchée. Suite à "Menu>quitter>redémarrer" il devient normal si elle est débranchée.
Après "Menu>Quitter>Eteindre, le démarrage est normal si la clé bootable est branchée. Il est très long (toujours les 25-30 minutes) si elle est retirée.
Si je passe par le bios, le démarrage est très long si la clé est branchée et normal sans elle.

J’installe le dernier noyau, 5.3.0-40-generic, pour avoir le Wifi et le son.

Je fais un Boot-Info : http://paste.ubuntu.com/p/zZbjBrDZj8/

Je vous remercie pour votre aide.
Desktop Dell Optiplex 790 (2012)_LMDE 6 Xfce-64 bit
CPU : Intel Core i5-2400_RAM : 8 Go_SSD 240 Go (LM) + DD 750 Go (Data)
________________________________________________________________________________________
Laptop Dell Latitude E5540 (2014)_LMDE 6 Xfce-64 Bit
CPU : Intel Core i5-4210U_RAM : 4 Go_SSD 128 Go
________________________________________________________________________________________

Répondre