ça freeze !

[guy-pierre]

Dernier message de la page précédente :

ok...je vais faire la manip. juste une question ; c'est quoi l'AER ?

[cyrille]

PCI (Express) Advanced Error Reporting
Système de rapport , de log des erreurs PCI (Express)

https://www.kernel.org/doc/Documentatio ... -howto.txt

[guy-pierre]

Peux-tu me dire la commande à faire pour modifier le fichier grub, car là le système m'indique que je n'ai pas la permission nécessaire pour le modifier ?

[cyrille]

Code : Tout sélectionner

sudo nano /etc/default/grub

[guy-pierre]

Bon, j'ai fait la manip et après un reboot j'ai lancé à nouveau la commande sudo dmesg.
Voici le résultat :

Code : Tout sélectionner

 guy@guy-aurore:~$ sudo dmesg
[sudo] Mot de passe de guy :         
[    0.000000] microcode: microcode updated early to revision 0xde, date = 2020-05-18
[    0.000000] Linux version 5.4.0-58-generic (buildd@lcy01-amd64-004) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 (Ubuntu 5.4.0-58.64-generic 5.4.73)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=831c0798-f09e-4dd1-bb2d-a9d735f4bb2f ro quiet splash pci=noaer
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e1d7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e1d8000-0x000000007ead7fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ead8000-0x000000008ccedfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ccee000-0x000000008eeddfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008eede000-0x000000008fbcdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008fbce000-0x000000008fc4dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008fc4e000-0x000000008fc4efff] usable
[    0.000000] BIOS-e820: [mem 0x000000008fc4f000-0x000000009d7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004607fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x7a3aa018-0x7a3ba057] usable ==> usable
[    0.000000] e820: update [mem 0x7a3aa018-0x7a3ba057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007a3aa017] usable
[    0.000000] reserve setup_data: [mem 0x000000007a3aa018-0x000000007a3ba057] usable
[    0.000000] reserve setup_data: [mem 0x000000007a3ba058-0x000000007e1d7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000007e1d8000-0x000000007ead7fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ead8000-0x000000008ccedfff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ccee000-0x000000008eeddfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008eede000-0x000000008fbcdfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008fbce000-0x000000008fc4dfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008fc4e000-0x000000008fc4efff] usable
[    0.000000] reserve setup_data: [mem 0x000000008fc4f000-0x000000009d7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff400000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004607fffff] usable
[    0.000000] efi: EFI v2.70 by INSYDE Corp.
[    0.000000] efi:  ACPI=0x8fc4d000  ACPI 2.0=0x8fc4d014  TPMFinalLog=0x8fbc4000  SMBIOS=0x8d266000  SMBIOS 3.0=0x8d264000  ESRT=0x8d262298  MEMATTR=0x7a82f018  TPMEventLog=0x7a3bb018 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Notebook                         NJ50_70CU                       /NJ50_70CU                       , BIOS 1.07.09 10/24/2019
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.000008] tsc: Detected 2599.992 MHz TSC
[    0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000014] last_pfn = 0x460800 max_arch_pfn = 0x400000000
[    0.000017] MTRR default type: write-back
[    0.000017] MTRR fixed ranges enabled:
[    0.000018]   00000-9FFFF write-back
[    0.000019]   A0000-BFFFF uncachable
[    0.000019]   C0000-FFFFF write-protect
[    0.000020] MTRR variable ranges enabled:
[    0.000021]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000021]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000022]   2 base 009C000000 mask 7FFC000000 uncachable
[    0.000022]   3 base 009A000000 mask 7FFE000000 uncachable
[    0.000023]   4 base 0099000000 mask 7FFF000000 uncachable
[    0.000024]   5 base 2000000000 mask 6000000000 uncachable
[    0.000024]   6 base 1000000000 mask 7000000000 uncachable
[    0.000025]   7 base 0800000000 mask 7800000000 uncachable
[    0.000025]   8 base 4000000000 mask 4000000000 uncachable
[    0.000025]   9 disabled
[    0.000449] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000603] last_pfn = 0x8fc4f max_arch_pfn = 0x400000000
[    0.006243] esrt: Reserving ESRT space from 0x000000008d262298 to 0x000000008d262320.
[    0.006252] check: Scanning 1 areas for low memory corruption
[    0.006256] Using GB pages for direct mapping
[    0.006491] secureboot: Secure boot disabled
[    0.006492] RAMDISK: [mem 0x3ae1f000-0x3fffdfff]
[    0.006503] ACPI: Early table checksum verification disabled
[    0.006505] ACPI: RSDP 0x000000008FC4D014 000024 (v02 INSYDE)
[    0.006507] ACPI: XSDT 0x000000008FC03188 0000D4 (v01 INSYDE CFL-ULT  00000002      01000013)
[    0.006511] ACPI: FACP 0x000000008FC37000 00010C (v05 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006515] ACPI: DSDT 0x000000008FC06000 02DCD3 (v02 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006517] ACPI: FACS 0x000000008FB8A000 000040
[    0.006519] ACPI: UEFI 0x000000008FBCD000 000236 (v01 INSYDE CFL-ULT  00000001 ACPI 00040000)
[    0.006521] ACPI: SSDT 0x000000008FC4A000 001B4A (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.006523] ACPI: SSDT 0x000000008FC46000 003149 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.006524] ACPI: SSDT 0x000000008FC45000 00046F (v02 Intel_ Tpm2Tabl 00001000 INTL 20160422)
[    0.006526] ACPI: SSDT 0x000000008FC44000 000046 (v02 MeSsdt MeSsdt   00003000 INTL 20160422)
[    0.006528] ACPI: TPM2 0x000000008FC43000 000034 (v03 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006531] ACPI: LPIT 0x000000008FC41000 000094 (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006537] ACPI: WSMT 0x000000008FC40000 000028 (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006540] ACPI: SSDT 0x000000008FC3E000 001616 (v02 INSYDE PtidDevc 00001000 INTL 20160422)
[    0.006546] ACPI: DBGP 0x000000008FC3D000 000034 (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006548] ACPI: DBG2 0x000000008FC3C000 00005C (v00 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006550] ACPI: SSDT 0x000000008FC3B000 000462 (v02 Intel  PerfTune 00001000 INTL 20160422)
[    0.006552] ACPI: SSDT 0x000000008FC3A000 00085F (v02 INTEL  xh_D02A  00000000 INTL 20160422)
[    0.006553] ACPI: NHLT 0x000000008FC38000 001821 (v00 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006555] ACPI: HPET 0x000000008FC36000 000038 (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006557] ACPI: APIC 0x000000008FC35000 000164 (v03 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006559] ACPI: MCFG 0x000000008FC34000 00003C (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006560] ACPI: DMAR 0x000000008FC05000 0000A8 (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006562] ACPI: SSDT 0x000000008FC04000 000164 (v01 INSYDE PcdTabl  00001000 INTL 20160422)
[    0.006564] ACPI: FPDT 0x000000008FC4C000 000044 (v01 INSYDE CFL-ULT  00000002 ACPI 00040000)
[    0.006566] ACPI: BGRT 0x000000008FC02000 000038 (v01 INSYDE CFL-ULT  00000001 ACPI 00040000)
[    0.006573] ACPI: Local APIC address 0xfee00000
[    0.006954] No NUMA configuration found
[    0.006955] Faking a node at [mem 0x0000000000000000-0x00000004607fffff]
[    0.006962] NODE_DATA(0) allocated [mem 0x4607d5000-0x4607fffff]
[    0.007126] Zone ranges:
[    0.007127]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007128]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007128]   Normal   [mem 0x0000000100000000-0x00000004607fffff]
[    0.007129]   Device   empty
[    0.007129] Movable zone start for each node
[    0.007131] Early memory node ranges
[    0.007132]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.007133]   node   0: [mem 0x0000000000100000-0x000000007e1d7fff]
[    0.007133]   node   0: [mem 0x000000007ead8000-0x000000008ccedfff]
[    0.007134]   node   0: [mem 0x000000008fc4e000-0x000000008fc4efff]
[    0.007134]   node   0: [mem 0x0000000100000000-0x00000004607fffff]
[    0.007526] Zeroed struct page in unavailable ranges: 46195 pages
[    0.007527] Initmem setup node 0 [mem 0x0000000000001000-0x00000004607fffff]
[    0.007528] On node 0 totalpages: 4115341
[    0.007528]   DMA zone: 64 pages used for memmap
[    0.007529]   DMA zone: 21 pages reserved
[    0.007529]   DMA zone: 3998 pages, LIFO batch:0
[    0.007581]   DMA32 zone: 8912 pages used for memmap
[    0.007581]   DMA32 zone: 570351 pages, LIFO batch:63
[    0.017386]   Normal zone: 55328 pages used for memmap
[    0.017386]   Normal zone: 3540992 pages, LIFO batch:63
[    0.066696] Reserving Intel graphics memory at [mem 0x99800000-0x9d7fffff]
[    0.066950] ACPI: PM-Timer IO Port: 0x1808
[    0.066951] ACPI: Local APIC address 0xfee00000
[    0.066956] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.066957] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.066957] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.066958] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.066958] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.066958] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.066959] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.066959] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.066960] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.066960] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.066960] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.066961] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.066961] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.066961] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.066962] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.066962] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.066963] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.066963] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.066963] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.066964] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.066998] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.066999] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.067000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.067001] ACPI: IRQ0 used by override.
[    0.067002] ACPI: IRQ9 used by override.
[    0.067003] Using ACPI (MADT) for SMP configuration information
[    0.067004] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.067008] e820: update [mem 0x7a2c2000-0x7a378fff] usable ==> reserved
[    0.067013] TSC deadline timer available
[    0.067014] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.067027] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.067028] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.067030] PM: Registered nosave memory: [mem 0x7a2c2000-0x7a378fff]
[    0.067031] PM: Registered nosave memory: [mem 0x7a3aa000-0x7a3aafff]
[    0.067032] PM: Registered nosave memory: [mem 0x7a3ba000-0x7a3bafff]
[    0.067033] PM: Registered nosave memory: [mem 0x7e1d8000-0x7ead7fff]
[    0.067034] PM: Registered nosave memory: [mem 0x8ccee000-0x8eeddfff]
[    0.067034] PM: Registered nosave memory: [mem 0x8eede000-0x8fbcdfff]
[    0.067035] PM: Registered nosave memory: [mem 0x8fbce000-0x8fc4dfff]
[    0.067036] PM: Registered nosave memory: [mem 0x8fc4f000-0x9d7fffff]
[    0.067036] PM: Registered nosave memory: [mem 0x9d800000-0xdfffffff]
[    0.067036] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.067037] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.067037] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.067037] PM: Registered nosave memory: [mem 0xfe011000-0xfed0ffff]
[    0.067038] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.067038] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.067038] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.067039] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.067039] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.067040] PM: Registered nosave memory: [mem 0xfee01000-0xff3fffff]
[    0.067040] PM: Registered nosave memory: [mem 0xff400000-0xffffffff]
[    0.067041] [mem 0x9d800000-0xdfffffff] available for PCI devices
[    0.067042] Booting paravirtualized kernel on bare hardware
[    0.067044] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.067049] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.067319] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.067323] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.067324] pcpu-alloc: [0] 0 1 2 3 
[    0.067345] Built 1 zonelists, mobility grouping on.  Total pages: 4051016
[    0.067346] Policy zone: Normal
[    0.067347] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-58-generic root=UUID=831c0798-f09e-4dd1-bb2d-a9d735f4bb2f ro quiet splash pci=noaer
[    0.069042] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.069920] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.069960] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.077041] Calgary: detecting Calgary via BIOS EBDA area
[    0.077043] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.138507] Memory: 15940560K/16461364K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 520804K reserved, 0K cma-reserved)
[    0.138514] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.138624] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.138638] ftrace: allocating 44541 entries in 174 pages
[    0.151935] rcu: Hierarchical RCU implementation.
[    0.151936] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.151937] 	Tasks RCU enabled.
[    0.151937] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.151938] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.154035] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.154566] random: crng done (trusting CPU's manufacturer)
[    0.154587] Console: colour dummy device 80x25
[    0.154591] printk: console [tty0] enabled
[    0.154631] ACPI: Core revision 20190816
[    0.154987] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.155115] APIC: Switch to symmetric I/O mode setup
[    0.155117] DMAR: Host address width 39
[    0.155118] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.155122] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.155122] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.155125] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.155126] DMAR: RMRR base: 0x0000008ece1000 end: 0x0000008ed00fff
[    0.155126] DMAR: RMRR base: 0x00000099000000 end: 0x0000009d7fffff
[    0.155128] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.155128] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.155129] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.157515] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.157516] x2apic enabled
[    0.157540] Switched APIC routing to cluster x2apic.
[    0.163235] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.182981] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
[    0.182985] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=10399968)
[    0.182986] pid_max: default: 32768 minimum: 301
[    0.185146] LSM: Security Framework initializing
[    0.185156] Yama: becoming mindful.
[    0.185180] AppArmor: AppArmor initialized
[    0.185231] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.185260] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.185273] *** VALIDATE tmpfs ***
[    0.185383] *** VALIDATE proc ***
[    0.185419] *** VALIDATE cgroup1 ***
[    0.185420] *** VALIDATE cgroup2 ***
[    0.185476] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.185489] process: using mwait in idle threads
[    0.185491] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.185491] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.185494] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.185495] Spectre V2 : Mitigation: Enhanced IBRS
[    0.185496] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.185497] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.185497] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.185499] SRBDS: Mitigation: TSX disabled
[    0.185713] Freeing SMP alternatives memory: 40K
[    0.191082] smpboot: CPU0: Intel(R) Core(TM) i3-10110U CPU @ 2.10GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.191152] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.191158] ... version:                4
[    0.191158] ... bit width:              48
[    0.191158] ... generic registers:      4
[    0.191159] ... value mask:             0000ffffffffffff
[    0.191159] ... max period:             00007fffffffffff
[    0.191159] ... fixed-purpose events:   3
[    0.191160] ... event mask:             000000070000000f
[    0.191187] rcu: Hierarchical SRCU implementation.
[    0.191745] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.191779] smp: Bringing up secondary CPUs ...
[    0.191847] x86: Booting SMP configuration:
[    0.191848] .... node  #0, CPUs:      #1 #2 #3
[    0.195193] smp: Brought up 1 node, 4 CPUs
[    0.195193] smpboot: Max logical packages: 1
[    0.195193] smpboot: Total of 4 processors activated (20799.93 BogoMIPS)
[    0.196650] devtmpfs: initialized
[    0.196650] x86/mm: Memory block size: 128MB
[    0.196650] PM: Registering ACPI NVS region [mem 0x8eede000-0x8fbcdfff] (13565952 bytes)
[    0.196650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.196650] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.196650] pinctrl core: initialized pinctrl subsystem
[    0.196650] PM: RTC time: 16:23:08, date: 2020-12-17
[    0.196650] NET: Registered protocol family 16
[    0.196650] audit: initializing netlink subsys (disabled)
[    0.196650] audit: type=2000 audit(1608222188.036:1): state=initialized audit_enabled=0 res=1
[    0.196650] EISA bus registered
[    0.196650] cpuidle: using governor ladder
[    0.196650] cpuidle: using governor menu
[    0.196650] KVM setup pv remote TLB flush
[    0.196650] ACPI: bus type PCI registered
[    0.196650] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.196650] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.196650] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.196650] PCI: Using configuration type 1 for base access
[    0.199332] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.199734] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.199734] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.199734] ACPI: Added _OSI(Module Device)
[    0.199734] ACPI: Added _OSI(Processor Device)
[    0.199734] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.199734] ACPI: Added _OSI(Processor Aggregator Device)
[    0.199734] ACPI: Added _OSI(Linux-Dell-Video)
[    0.199734] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.199734] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.227762] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.229410] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.235349] ACPI: Dynamic OEM Table Load:
[    0.235358] ACPI: SSDT 0xFFFF9EF5CDF41D00 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160422)
[    0.236198] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.236810] ACPI: Dynamic OEM Table Load:
[    0.236815] ACPI: SSDT 0xFFFF9EF5CDF78000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.237730] ACPI: Dynamic OEM Table Load:
[    0.237734] ACPI: SSDT 0xFFFF9EF5CE39A000 000605 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.238723] ACPI: Dynamic OEM Table Load:
[    0.238726] ACPI: SSDT 0xFFFF9EF5CDF7DC00 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.239616] ACPI: Dynamic OEM Table Load:
[    0.239621] ACPI: SSDT 0xFFFF9EF5CDFC7000 000BE2 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.240696] ACPI: Dynamic OEM Table Load:
[    0.240700] ACPI: SSDT 0xFFFF9EF5CE39F000 000778 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.241725] ACPI: Dynamic OEM Table Load:
[    0.241728] ACPI: SSDT 0xFFFF9EF5CDF78C00 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.242749] ACPI: Dynamic OEM Table Load:
[    0.242753] ACPI: SSDT 0xFFFF9EF5CDFC0000 000D74 (v02 PmRef  ApPsd    00003000 INTL 20160422)
[    0.244333] ACPI: Dynamic OEM Table Load:
[    0.244336] ACPI: SSDT 0xFFFF9EF5CDF7A800 0003CA (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.246304] ACPI: EC: EC started
[    0.246304] ACPI: EC: interrupt blocked
[    0.247396] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.247397] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.247398] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.247398] ACPI: Interpreter enabled
[    0.247434] ACPI: (supports S0 S3 S4 S5)
[    0.247435] ACPI: Using IOAPIC for interrupt routing
[    0.247466] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.247794] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.257242] ACPI: Power Resource [V0PR] (on)
[    0.257402] ACPI: Power Resource [V1PR] (on)
[    0.257557] ACPI: Power Resource [V2PR] (on)
[    0.258731] ACPI: Power Resource [WRST] (on)
[    0.260577] ACPI: Power Resource [PIN] (off)
[    0.260893] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.260897] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.263101] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[    0.265162] PCI host bridge to bus 0000:00
[    0.265163] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.265164] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.265165] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.265166] pci_bus 0000:00: root bus resource [mem 0x9d800000-0xdfffffff window]
[    0.265166] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.265167] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.265175] pci 0000:00:00.0: [8086:9b71] type 00 class 0x060000
[    0.265896] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[    0.265905] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.265910] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.265913] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.265925] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.266732] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[    0.266754] pci 0000:00:12.0: reg 0x10: [mem 0xb121c000-0xb121cfff 64bit]
[    0.267544] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[    0.267563] pci 0000:00:14.0: reg 0x10: [mem 0xb1200000-0xb120ffff 64bit]
[    0.267619] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.268366] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[    0.268386] pci 0000:00:14.2: reg 0x10: [mem 0xb1218000-0xb1219fff 64bit]
[    0.268397] pci 0000:00:14.2: reg 0x18: [mem 0xb121d000-0xb121dfff 64bit]
[    0.269185] pci 0000:00:14.3: [8086:02f0] type 00 class 0x028000
[    0.269210] pci 0000:00:14.3: reg 0x10: [mem 0xb1210000-0xb1213fff 64bit]
[    0.269369] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.270105] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[    0.270131] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.270924] pci 0000:00:15.1: [8086:02e9] type 00 class 0x0c8000
[    0.270950] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.271768] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[    0.271793] pci 0000:00:16.0: reg 0x10: [mem 0xb1220000-0xb1220fff 64bit]
[    0.271863] pci 0000:00:16.0: PME# supported from D3hot
[    0.272640] pci 0000:00:17.0: [8086:02d3] type 00 class 0x010601
[    0.272656] pci 0000:00:17.0: reg 0x10: [mem 0xb121a000-0xb121bfff]
[    0.272662] pci 0000:00:17.0: reg 0x14: [mem 0xb1224000-0xb12240ff]
[    0.272669] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
[    0.272675] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
[    0.272682] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[    0.272688] pci 0000:00:17.0: reg 0x24: [mem 0xb1223000-0xb12237ff]
[    0.272725] pci 0000:00:17.0: PME# supported from D3hot
[    0.273509] pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400
[    0.273576] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.273589] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.274349] pci 0000:00:1d.1: [8086:02b1] type 01 class 0x060400
[    0.274418] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[    0.274431] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
[    0.275231] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[    0.276139] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040300
[    0.276179] pci 0000:00:1f.3: reg 0x10: [mem 0xb1214000-0xb1217fff 64bit]
[    0.276215] pci 0000:00:1f.3: reg 0x20: [mem 0xb1000000-0xb10fffff 64bit]
[    0.276292] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.277086] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[    0.277112] pci 0000:00:1f.4: reg 0x10: [mem 0xb1221000-0xb12210ff 64bit]
[    0.277139] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
[    0.277889] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[    0.277905] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.278693] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000
[    0.278718] pci 0000:01:00.0: reg 0x10: [mem 0xb1105000-0xb1105fff]
[    0.278758] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.278847] pci 0000:01:00.0: supports D1 D2
[    0.278847] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.278944] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000
[    0.278970] pci 0000:01:00.1: reg 0x10: [io  0x3000-0x30ff]
[    0.278995] pci 0000:01:00.1: reg 0x18: [mem 0xb1104000-0xb1104fff 64bit]
[    0.279010] pci 0000:01:00.1: reg 0x20: [mem 0xb1100000-0xb1103fff 64bit]
[    0.279105] pci 0000:01:00.1: supports D1 D2
[    0.279105] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.279231] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.279233] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.279235] pci 0000:00:1d.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.279270] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.280764] ACPI: EC: interrupt unblocked
[    0.280764] ACPI: EC: event unblocked
[    0.280764] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.280764] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[    0.280766] iommu: Default domain type: Translated 
[    0.280766] SCSI subsystem initialized
[    0.280766] libata version 3.00 loaded.
[    0.280766] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.280766] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.280766] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.280766] vgaarb: loaded
[    0.280766] ACPI: bus type USB registered
[    0.280766] usbcore: registered new interface driver usbfs
[    0.280766] usbcore: registered new interface driver hub
[    0.280766] usbcore: registered new device driver usb
[    0.280766] pps_core: LinuxPPS API ver. 1 registered
[    0.280766] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.280766] PTP clock support registered
[    0.280766] EDAC MC: Ver: 3.0.0
[    0.280766] Registered efivars operations
[    0.280766] PCI: Using ACPI for IRQ routing
[    0.322751] PCI: pci_cache_line_size set to 64 bytes
[    0.322905] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.322906] e820: reserve RAM buffer [mem 0x7a2c2000-0x7bffffff]
[    0.322907] e820: reserve RAM buffer [mem 0x7a3aa018-0x7bffffff]
[    0.322907] e820: reserve RAM buffer [mem 0x7e1d8000-0x7fffffff]
[    0.322907] e820: reserve RAM buffer [mem 0x8ccee000-0x8fffffff]
[    0.322908] e820: reserve RAM buffer [mem 0x8fc4f000-0x8fffffff]
[    0.322909] e820: reserve RAM buffer [mem 0x460800000-0x463ffffff]
[    0.322983] NetLabel: Initializing
[    0.322983] NetLabel:  domain hash size = 128
[    0.322983] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.322986] NetLabel:  unlabeled traffic allowed by default
[    0.323688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.323691] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.326994] clocksource: Switched to clocksource tsc-early
[    0.333075] *** VALIDATE bpf ***
[    0.335024] VFS: Disk quotas dquot_6.6.0
[    0.335036] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.335055] *** VALIDATE ramfs ***
[    0.335056] *** VALIDATE hugetlbfs ***
[    0.335111] AppArmor: AppArmor Filesystem Enabled
[    0.335134] pnp: PnP ACPI init
[    0.335245] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.335249] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335413] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.335414] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.335415] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.335416] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.335417] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.335418] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.335418] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[    0.335420] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335670] system 00:02: [io  0x2000-0x20fe] has been reserved
[    0.335672] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335711] pnp 00:03: disabling [io  0x3322-0x3323] because it overlaps 0000:00:1d.0 BAR 13 [io  0x3000-0x3fff]
[    0.335725] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.335726] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.335727] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.335741] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.335810] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.335812] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.335832] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.335843] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.336159] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.336160] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.336161] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.336161] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.336162] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.336163] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.336164] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.336165] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.336167] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336383] system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.336384] system 00:09: [mem 0xfe036008-0xfe036fff] has been reserved
[    0.336384] system 00:09: [mem 0xfe037000-0xfe037fff] has been reserved
[    0.336386] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336510] system 00:0a: [mem 0xfe036000-0xfe036007] has been reserved
[    0.336512] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.336680] pnp: PnP ACPI: found 11 devices
[    0.337440] thermal_sys: Registered thermal governor 'fair_share'
[    0.337440] thermal_sys: Registered thermal governor 'bang_bang'
[    0.337441] thermal_sys: Registered thermal governor 'step_wise'
[    0.337441] thermal_sys: Registered thermal governor 'user_space'
[    0.337442] thermal_sys: Registered thermal governor 'power_allocator'
[    0.341929] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.341955] pci 0000:00:15.0: BAR 0: assigned [mem 0x9d800000-0x9d800fff 64bit]
[    0.341968] pci 0000:00:15.1: BAR 0: assigned [mem 0x9d801000-0x9d801fff 64bit]
[    0.341979] pci 0000:01:00.0: BAR 6: assigned [mem 0xb1110000-0xb111ffff pref]
[    0.341980] pci 0000:00:1d.0: PCI bridge to [bus 01]
[    0.341982] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.341984] pci 0000:00:1d.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.341989] pci 0000:00:1d.1: PCI bridge to [bus 02]
[    0.341996] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.341996] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.341997] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.341998] pci_bus 0000:00: resource 7 [mem 0x9d800000-0xdfffffff window]
[    0.341998] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
[    0.341999] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.342000] pci_bus 0000:01: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.342102] NET: Registered protocol family 2
[    0.342264] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.342352] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.342498] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.342549] TCP: Hash tables configured (established 131072 bind 65536)
[    0.342591] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.342627] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.342681] NET: Registered protocol family 1
[    0.342685] NET: Registered protocol family 44
[    0.342693] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.344276] PCI: CLS 64 bytes, default 64
[    0.344310] Trying to unpack rootfs image as initramfs...
[    0.496648] Initramfs unpacking failed: Decoding failed
[    0.496657] fbcon: Taking over console
[    0.507620] Freeing initrd memory: 83836K
[    0.527047] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.527049] software IO TLB: mapped [mem 0x87d45000-0x8bd45000] (64MB)
[    0.527266] check: Scanning for low memory corruption every 60 seconds
[    0.527731] Initialise system trusted keyrings
[    0.527738] Key type blacklist registered
[    0.527771] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.529144] zbud: loaded
[    0.529476] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.529636] fuse: init (API version 7.31)
[    0.529652] *** VALIDATE fuse ***
[    0.529654] *** VALIDATE fuse ***
[    0.529766] Platform Keyring initialized
[    0.533377] Key type asymmetric registered
[    0.533378] Asymmetric key parser 'x509' registered
[    0.533385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.533417] io scheduler mq-deadline registered
[    0.533789] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[    0.534022] pcieport 0000:00:1d.1: PME: Signaling with IRQ 123
[    0.534093] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.534137] efifb: probing for efifb
[    0.534159] efifb: showing boot graphics
[    0.535644] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
[    0.535645] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.535646] efifb: scrolling: redraw
[    0.535647] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.535723] Console: switching to colour frame buffer device 240x67
[    0.539069] fb0: EFI VGA frame buffer device
[    0.539075] intel_idle: MWAIT substates: 0x11142120
[    0.539076] intel_idle: v0.4.1 model 0x8E
[    0.539262] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.539419] ACPI: AC Adapter [AC] (on-line)
[    0.539466] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.539491] ACPI: Power Button [PWRB]
[    0.539514] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.539531] ACPI: Sleep Button [SLPB]
[    0.539552] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.539565] ACPI: Lid Switch [LID0]
[    0.539590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.539604] ACPI: Power Button [PWRF]
[    0.540617] ACPI: Invalid active0 threshold
[    0.540757] thermal LNXTHERM:00: registered as thermal_zone0
[    0.540758] ACPI: Thermal Zone [TZ0] (62 C)
[    0.540938] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.541541] battery: ACPI: Battery Slot [BAT0] (battery present)
[    0.542475] Linux agpgart interface v0.103
[    0.605798] loop: module loaded
[    0.606016] libphy: Fixed MDIO Bus: probed
[    0.606017] tun: Universal TUN/TAP device driver, 1.6
[    0.606085] PPP generic driver version 2.4.2
[    0.606182] VFIO - User Level meta-driver version: 0.3
[    0.606272] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.606274] ehci-pci: EHCI PCI platform driver
[    0.606285] ehci-platform: EHCI generic platform driver
[    0.606297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.606298] ohci-pci: OHCI PCI platform driver
[    0.606306] ohci-platform: OHCI generic platform driver
[    0.606312] uhci_hcd: USB Universal Host Controller Interface driver
[    0.606594] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.606599] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.607679] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.607683] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.607882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.607884] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.607885] usb usb1: Product: xHCI Host Controller
[    0.607886] usb usb1: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.607887] usb usb1: SerialNumber: 0000:00:14.0
[    0.608007] hub 1-0:1.0: USB hub found
[    0.608023] hub 1-0:1.0: 12 ports detected
[    0.609905] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.609908] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.609910] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.609941] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.609943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.609944] usb usb2: Product: xHCI Host Controller
[    0.609945] usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.609946] usb usb2: SerialNumber: 0000:00:14.0
[    0.610052] hub 2-0:1.0: USB hub found
[    0.610063] hub 2-0:1.0: 6 ports detected
[    0.611209] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.234072] i8042: Detected active multiplexing controller, rev 1.1
[    1.235864] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.235866] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.235884] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.235895] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.235904] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.235958] mousedev: PS/2 mouse device common for all mice
[    1.236080] rtc_cmos 00:04: RTC can wake from S4
[    1.236962] rtc_cmos 00:04: registered as rtc0
[    1.236971] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.236975] i2c /dev entries driver
[    1.237005] device-mapper: uevent: version 1.0.3
[    1.237035] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.237045] platform eisa.0: Probing EISA bus 0
[    1.237046] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.237047] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.237048] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.237049] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.237049] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.237050] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.237050] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.237051] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.237051] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.237052] platform eisa.0: EISA: Detected 0 cards
[    1.237055] intel_pstate: Intel P-state driver initializing
[    1.237546] intel_pstate: HWP enabled
[    1.237606] ledtrig-cpu: registered to indicate activity on CPUs
[    1.237608] EFI Variables Facility v0.08 2004-May-17
[    1.238211] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.268767] intel_pmc_core intel_pmc_core.0:  initialized
[    1.268822] drop_monitor: Initializing network drop monitor service
[    1.268945] NET: Registered protocol family 10
[    1.272662] Segment Routing with IPv6
[    1.272679] NET: Registered protocol family 17
[    1.272700] Key type dns_resolver registered
[    1.272875] RAS: Correctable Errors collector initialized.
[    1.272897] microcode: sig=0x806ec, pf=0x4, revision=0xde
[    1.272925] microcode: Microcode Update Driver: v2.2.
[    1.272928] IPI shorthand broadcast: enabled
[    1.272933] sched_clock: Marking stable (1268346083, 4576874)->(1277898067, -4975110)
[    1.273024] registered taskstats version 1
[    1.273031] Loading compiled-in X.509 certificates
[    1.273489] Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
[    1.273508] zswap: loaded using pool lzo/zbud
[    1.273546] Key type ._fscrypt registered
[    1.273546] Key type .fscrypt registered
[    1.276628] Key type big_key registered
[    1.276632] Key type trusted registered
[    1.278124] Key type encrypted registered
[    1.278126] AppArmor: AppArmor sha1 policy hashing enabled
[    1.279190] integrity: Loading X.509 certificate: UEFI:MokListRT
[    1.279218] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    1.279218] integrity: Loading X.509 certificate: UEFI:MokListRT
[    1.279421] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    1.280030] ima: Allocated hash algorithm: sha1
[    1.294297] ima: No architecture policies found
[    1.294312] evm: Initialising EVM extended attributes:
[    1.294313] evm: security.selinux
[    1.294313] evm: security.SMACK64
[    1.294314] evm: security.SMACK64EXEC
[    1.294314] evm: security.SMACK64TRANSMUTE
[    1.294314] evm: security.SMACK64MMAP
[    1.294314] evm: security.apparmor
[    1.294315] evm: security.ima
[    1.294315] evm: security.capability
[    1.294315] evm: HMAC attrs: 0x1
[    1.295160] PM:   Magic number: 0:834:388
[    1.295176] thermal cooling_device3: hash matches
[    1.295439] rtc_cmos 00:04: setting system clock to 2020-12-17T16:23:09 UTC (1608222189)
[    1.296313] Freeing unused decrypted memory: 2040K
[    1.296752] Freeing unused kernel image memory: 2720K
[    1.335259] Write protecting the kernel read-only data: 22528k
[    1.335707] Freeing unused kernel image memory: 2008K
[    1.335908] Freeing unused kernel image memory: 1212K
[    1.342979] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.342982] Run /init as init process
[    1.397362] hidraw: raw HID events driver (C) Jiri Kosina
[    1.399877] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.407870] ahci 0000:00:17.0: version 3.0
[    1.407875] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    1.418505] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[    1.418507] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
[    1.418851] scsi host0: ahci
[    1.422997] scsi host1: ahci
[    1.423146] scsi host2: ahci
[    1.423198] ata1: SATA max UDMA/133 abar m2048@0xb1223000 port 0xb1223100 irq 126
[    1.423200] ata2: SATA max UDMA/133 abar m2048@0xb1223000 port 0xb1223180 irq 126
[    1.423201] ata3: SATA max UDMA/133 abar m2048@0xb1223000 port 0xb1223200 irq 126
[    1.424059] libphy: r8169: probed
[    1.424231] r8169 0000:01:00.1 eth0: RTL8411b, 80:fa:5b:83:11:9b, XID 5c8, IRQ 127
[    1.424233] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.426996] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    1.427255] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.429941] i2c_hid i2c-SYNA1202:00: i2c-SYNA1202:00 supply vdd not found, using dummy regulator
[    1.429948] i2c_hid i2c-SYNA1202:00: i2c-SYNA1202:00 supply vddl not found, using dummy regulator
[    1.432294] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.432350] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.433764] cryptd: max_cpu_qlen set to 1000
[    1.438094] AVX2 version of gcm_enc/dec engaged.
[    1.438095] AES CTR mode by8 optimization enabled
[    1.463996] r8169 0000:01:00.1 enp1s0f1: renamed from eth0
[    1.467499] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.492863] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
[    1.492864] fb0: switching to inteldrmfb from EFI VGA
[    1.492913] Console: switching to colour dummy device 80x25
[    1.492936] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.493929] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.493929] [drm] Driver supports precise vblank timestamp query.
[    1.494339] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.494831] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.509597] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    1.511738] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.512022] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    1.532633] fbcon: i915drmfb (fb0) is primary device
[    1.535031] tsc: Refined TSC clocksource calibration: 2592.076 MHz
[    1.535034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cfe5e801, max_idle_ns: 440795232458 ns
[    1.535101] clocksource: Switched to clocksource tsc
[    1.540901] Console: switching to colour frame buffer device 240x67
[    1.559758] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    1.611086] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[    1.611323] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.630682] usb 1-1: New USB device found, idVendor=5986, idProduct=9102, bcdDevice= 6.01
[    1.630683] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.630684] usb 1-1: Product: BisonCam,NB Pro
[    1.630685] usb 1-1: Manufacturer: Sonix Technology Co., Ltd.
[    1.738904] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.738943] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.738957] ata1: SATA link down (SStatus 4 SControl 300)
[    1.741629] ata2.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[    1.745180] ata2.00: configured for UDMA/133
[    1.745183] ata3.00: ATA-10: LDLC SSD F6 PLUS M.2 2280 3D NAND 960GB, S1224A0, max UDMA/133
[    1.745184] ata3.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.749793] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUD0N     1.00 PQ: 0 ANSI: 5
[    1.754699] ata3.00: configured for UDMA/133
[    1.759088] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    1.822685] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.822686] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.839305] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.839374] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    1.839696] scsi 2:0:0:0: Direct-Access     ATA      LDLC SSD F6 PLUS 4A0  PQ: 0 ANSI: 5
[    1.839969] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.840093] sd 2:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[    1.840101] sd 2:0:0:0: [sda] Write Protect is off
[    1.840103] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.840114] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.864596]  sda: sda1 sda2
[    1.864816] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.867183] input: SYNA1202:00 06CB:CD65 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA1202:00/0018:06CB:CD65.0001/input/input14
[    1.867253] input: SYNA1202:00 06CB:CD65 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA1202:00/0018:06CB:CD65.0001/input/input15
[    1.867432] hid-generic 0018:06CB:CD65.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA1202:00 06CB:CD65] on i2c-SYNA1202:00
[    1.909497] usb 1-5: New USB device found, idVendor=25a7, idProduct=fa67, bcdDevice= 7.21
[    1.909499] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.909499] usb 1-5: Product: 2.4G Receiver
[    1.909500] usb 1-5: Manufacturer: CX
[    2.035090] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    2.185307] usb 1-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    2.185308] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.190007] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:25A7:FA67.0002/input/input17
[    2.247206] hid-generic 0003:25A7:FA67.0002: input,hidraw1: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:14.0-5/input0
[    2.249779] input: CX 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:25A7:FA67.0003/input/input18
[    2.249866] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:25A7:FA67.0003/input/input19
[    2.249904] input: CX 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:25A7:FA67.0003/input/input20
[    2.307260] input: CX 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:25A7:FA67.0003/input/input21
[    2.307536] hid-generic 0003:25A7:FA67.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:14.0-5/input1
[    2.307564] usbcore: registered new interface driver usbhid
[    2.307565] usbhid: USB HID core driver
[    2.503019] raid6: avx2x4   gen() 37551 MB/s
[    2.551014] raid6: avx2x4   xor() 24388 MB/s
[    2.599011] raid6: avx2x2   gen() 34114 MB/s
[    2.647019] raid6: avx2x2   xor() 21947 MB/s
[    2.695019] raid6: avx2x1   gen() 27678 MB/s
[    2.743019] raid6: avx2x1   xor() 20262 MB/s
[    2.791019] raid6: sse2x4   gen() 14956 MB/s
[    2.839012] raid6: sse2x4   xor() 10311 MB/s
[    2.887019] raid6: sse2x2   gen() 13836 MB/s
[    2.935021] raid6: sse2x2   xor()  9641 MB/s
[    2.983019] raid6: sse2x1   gen() 12387 MB/s
[    3.031021] raid6: sse2x1   xor()  7333 MB/s
[    3.031021] raid6: using algorithm avx2x4 gen() 37551 MB/s
[    3.031021] raid6: .... xor() 24388 MB/s, rmw enabled
[    3.031022] raid6: using avx2x2 recovery algorithm
[    3.032933] xor: automatically using best checksumming function   avx       
[    3.044782] Btrfs loaded, crc32c=crc32c-intel
[    3.204927] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.359254] systemd[1]: Inserted module 'autofs4'
[    3.434548] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.451121] systemd[1]: Detected architecture x86-64.
[    3.471529] systemd[1]: Set hostname to <guy-aurore>.
[    3.573961] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    3.618536] systemd[1]: Created slice system-modprobe.slice.
[    3.618711] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.618850] systemd[1]: Created slice User and Session Slice.
[    3.618879] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.619119] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.619141] systemd[1]: Reached target User and Group Name Lookups.
[    3.619151] systemd[1]: Reached target Slices.
[    3.619191] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.619239] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.621696] systemd[1]: Listening on RPCbind Server Activation Socket.
[    3.622656] systemd[1]: Listening on Syslog Socket.
[    3.623789] systemd[1]: Listening on Process Core Dump Socket.
[    3.623831] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.623863] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.623951] systemd[1]: Listening on Journal Audit Socket.
[    3.623990] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.624040] systemd[1]: Listening on Journal Socket.
[    3.624087] systemd[1]: Listening on udev Control Socket.
[    3.624122] systemd[1]: Listening on udev Kernel Socket.
[    3.624674] systemd[1]: Mounting Huge Pages File System...
[    3.625307] systemd[1]: Mounting POSIX Message Queue File System...
[    3.626014] systemd[1]: Mounting Kernel Debug File System...
[    3.626865] systemd[1]: Mounting Kernel Trace File System...
[    3.628007] systemd[1]: Starting Journal Service...
[    3.628718] systemd[1]: Starting Availability of block devices...
[    3.629640] systemd[1]: Starting Set the console keyboard layout...
[    3.630486] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    3.631201] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.631222] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    3.632386] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.632418] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    3.633940] systemd[1]: Starting Load Kernel Modules...
[    3.634713] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.635868] systemd[1]: Starting udev Coldplug all Devices...
[    3.636712] systemd[1]: Starting Uncomplicated firewall...
[    3.638094] systemd[1]: Mounted Huge Pages File System.
[    3.638228] systemd[1]: Mounted POSIX Message Queue File System.
[    3.638334] systemd[1]: Mounted Kernel Debug File System.
[    3.638428] systemd[1]: Mounted Kernel Trace File System.
[    3.639159] systemd[1]: Finished Availability of block devices.
[    3.639692] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    3.641904] systemd[1]: Finished Uncomplicated firewall.
[    3.649871] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.650901] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.651568] systemd[1]: Activating swap /swapfile...
[    3.652455] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.652486] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    3.653180] systemd[1]: Starting Load/Save Random Seed...
[    3.653915] systemd[1]: Starting Create System Users...
[    3.668844] systemd[1]: Finished Load/Save Random Seed.
[    3.675997] systemd[1]: Finished Create System Users.
[    3.676158] lp: driver loaded but no devices found
[    3.676844] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.687999] ppdev: user-space parallel port driver
[    3.695248] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.696195] systemd[1]: Starting udev Kernel Device Manager...
[    3.697730] systemd[1]: Finished Load Kernel Modules.
[    3.698689] systemd[1]: Mounting FUSE Control File System...
[    3.699693] systemd[1]: Mounting Kernel Configuration File System...
[    3.700560] systemd[1]: Starting Apply Kernel Variables...
[    3.701136] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    3.702038] systemd[1]: Mounted FUSE Control File System.
[    3.704094] systemd[1]: Mounted Kernel Configuration File System.
[    3.725442] systemd[1]: Finished Apply Kernel Variables.
[    3.728805] systemd[1]: Finished udev Coldplug all Devices.
[    3.730057] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    3.733185] systemd[1]: Started Journal Service.
[    3.741535] systemd-journald[338]: Received client request to flush runtime journal.
[    3.755147] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    4.000581] input: Intel HID events as /devices/platform/INT33D5:00/input/input23
[    4.051456] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.061565] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.061768] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.091457] mc: Linux media interface: v0.10
[    4.097539] Intel(R) Wireless WiFi driver for Linux
[    4.097540] Copyright(c) 2003- 2015 Intel Corporation
[    4.103230] videodev: Linux video capture interface: v2.00
[    4.123617] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 58.3.35.22
[    4.123620] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
[    4.123621] iwlwifi 0000:00:14.3: Found debug configuration: 0
[    4.123654] Bluetooth: Core ver 2.22
[    4.123667] NET: Registered protocol family 31
[    4.123668] Bluetooth: HCI device and connection manager initialized
[    4.123671] Bluetooth: HCI socket layer initialized
[    4.123673] Bluetooth: L2CAP socket layer initialized
[    4.123675] Bluetooth: SCO socket layer initialized
[    4.123869] iwlwifi 0000:00:14.3: loaded firmware version 50.3e391d3e.0 op_mode iwlmvm
[    4.138472] usbcore: registered new interface driver btusb
[    4.142523] uvcvideo: Found UVC 1.00 device BisonCam,NB Pro (5986:9102)
[    4.143332] Bluetooth: hci0: Firmware revision 0.0 build 121 week 36 2020
[    4.169585] input: BisonCam,NB Pro: BisonCam,NB Pr as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input24
[    4.173330] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x354
[    4.173680] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    4.173681] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.173681] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.173682] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.173682] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.173683] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    4.180272] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    4.180756] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor.
[    4.181556] usbcore: registered new interface driver uvcvideo
[    4.181557] USB Video Class driver (1.1.1)
[    4.206376] input: SYNA1202:00 06CB:CD65 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA1202:00/0018:06CB:CD65.0001/input/input25
[    4.206590] input: SYNA1202:00 06CB:CD65 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYNA1202:00/0018:06CB:CD65.0001/input/input26
[    4.206678] hid-multitouch 0018:06CB:CD65.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA1202:00 06CB:CD65] on i2c-SYNA1202:00
[    4.325884] iwlwifi 0000:00:14.3: base HW address: 40:ec:99:0f:ea:d3
[    4.338483] thermal thermal_zone2: failed to read out thermal zone (-61)
[    4.372815] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[    4.383385] intel_rapl_common: Found RAPL domain package
[    4.383387] intel_rapl_common: Found RAPL domain core
[    4.383387] intel_rapl_common: Found RAPL domain uncore
[    4.383388] intel_rapl_common: Found RAPL domain dram
[    4.392630] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.392863] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.427547] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC293: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.427549] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.427551] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    4.427551] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.427552] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.427554] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    4.427555] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.490476] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    4.490519] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    4.490558] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[    4.490599] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[    4.490636] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[    4.490673] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[    4.490703] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[    4.509955] audit: type=1400 audit(1608222192.707:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=607 comm="apparmor_parser"
[    4.510336] audit: type=1400 audit(1608222192.707:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=606 comm="apparmor_parser"
[    4.514687] audit: type=1400 audit(1608222192.711:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=615 comm="apparmor_parser"
[    4.515637] audit: type=1400 audit(1608222192.715:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=609 comm="apparmor_parser"
[    4.515645] audit: type=1400 audit(1608222192.715:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=609 comm="apparmor_parser"
[    4.520034] audit: type=1400 audit(1608222192.719:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=610 comm="apparmor_parser"
[    4.521641] audit: type=1400 audit(1608222192.719:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser"
[    4.521643] audit: type=1400 audit(1608222192.719:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=617 comm="apparmor_parser"
[    4.521645] audit: type=1400 audit(1608222192.719:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser"
[    4.861316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.861317] Bluetooth: BNEP filters: protocol multicast
[    4.861320] Bluetooth: BNEP socket layer initialized
[    4.880282] NET: Registered protocol family 38
[    5.140807] Generic FE-GE Realtek PHY r8169-101:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE)
[    5.212601] kauditd_printk_skb: 14 callbacks suppressed
[    5.212602] audit: type=1400 audit(1608222193.411:25): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=780 comm="cups-browsed" capability=23  capname="sys_nice"
[    5.275717] r8169 0000:01:00.1 enp1s0f1: Link is Down
[    5.288057] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    5.433490] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[    5.444673] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[    7.063026] Bluetooth: RFCOMM TTY layer initialized
[    7.063030] Bluetooth: RFCOMM socket layer initialized
[    7.063034] Bluetooth: RFCOMM ver 1.11
[    8.829098] wlp0s20f3: authenticate with 64:66:24:bc:b4:30
[    8.834175] wlp0s20f3: send auth to 64:66:24:bc:b4:30 (try 1/3)
[    8.857743] wlp0s20f3: authenticated
[    8.859034] wlp0s20f3: associate with 64:66:24:bc:b4:30 (try 1/3)
[    8.863205] wlp0s20f3: RX AssocResp from 64:66:24:bc:b4:30 (capab=0x411 status=0 aid=3)
[    8.870250] wlp0s20f3: associated
[    8.912770] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[    8.949819] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 64:66:24:bc:b4:30
guy@guy-aurore:~$ 
 

[cyrille]

Tu le compares à l'autre et tu vois si moins d'erreurs.
Si oui, en espérant que ça ait résolu tes freezes, si non c'est qu'on à taper à côté.

[guy-pierre]

oui, il est clair qu'il y a beaucoup moins d'erreur. Par exemple, toutes les lignes en rouge "pcieport" ont disparu. je ne vois qu'une seule ligne en rouge : "5.467186] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS". Mais je ne suis pas sûr qu'il s'agisse d'une erreur. En tout cas, le terme "error" n'apparaît pas.

[cyrille]

reste à voir si ça freeze

[cyrille]

Que te retourne

Code : Tout sélectionner

aptitude search ~ifirmware

[guy-pierre]

Voici le résultat de la commande :

Code : Tout sélectionner

 guy@guy-aurore:~$ aptitude search ~ifirmware
i   linux-firmware                  - Micrologiciel pour les pilotes du noyau Li
guy@guy-aurore:~$

[cyrille]

je me disais bien que ça me rappelais qq chose : viewtopic.php?f=18&t=16725