Résolu le 21-12-18 [résolu]Problème wifi LM 18 aléatoire sur pc fixe

Assistance concernant Linux Mint
Avatar du membre
heros21
Messages : 172
Enregistré le : sam. 16 juil. 2016 00:04

[résolu]Problème wifi LM 18 aléatoire sur pc fixe

Message par heros21 »

Bonjour,
voilà j'ai un petit problème de wifi avec mon pc fixe et ma carte wifi d-link dwa 582 ( rtl8812ae ).
Par moment le wifi marche bien sans problème et d'autres fois il plante se déconnecte et n'arrive plus a se reconnecté pendant un moment puis sa remarche mais par moment il deconne sans pour autant se déconnecter.Je suis sous freebox v6 en mode routeur avec canal 8 et 2.4 ghz.
Voici le résultat de inxi -n

Code : Tout sélectionner

DS3 ~ $ inxi -n
Network:   Card-1: Realtek RTL8812AE 802.11ac PCIe Wireless Network Adapter
           driver: rtl8821ae
           IF: wlp3s0 state: up mac: 
           Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp5s0 state: down mac: 
et lspci | grep Network

Code : Tout sélectionner

3:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8812AE 802.11ac PCIe Wireless Network Adapter (rev 01)
J'ai essayer se code

Code : Tout sélectionner

echo "options rtl8812ae frulps=0" | sudo tee /etc/modprobe.d/rtl8812ae.conf
mais rien a faire sa marche pas.
Bon voilà c'est foireux j'avais prévenu à vos clavier sans oublier la matière grise.
Ps: attention je suis un noob.
Modifié en dernier par heros21 le mar. 26 juil. 2016 12:25, modifié 1 fois.
Pc fixe ( desktop ), Intel© Pentium© CPU G4400 , GeForce GT 710, 8 GO RAM, Linux Mint 20.3 Cinnamon

mpedro
Messages : 1517
Enregistré le : dim. 8 nov. 2015 22:13
Contact :

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par mpedro »

Justement change de canal
Ca m est arrivé sur free avec la V5 et la hotline s est chargé du changement de canal. C etait sur un laptop N150 pas fortiche sur sa wifi et des deconnexions recurrentes.

Code : Tout sélectionner

édit essaye le canal  6 (40mhg) plus souvent libre du voisinage le cas échéant et désactiver la fonction hotspots de la box 
Modifié en dernier par mpedro le ven. 22 juil. 2016 09:47, modifié 1 fois.
Stretch 32bits cinnamon/Fedora25/Sarah
Compaq 8510p/MSI GE70/Raspberry Pi2

Avatar du membre
heros21
Messages : 172
Enregistré le : sam. 16 juil. 2016 00:04

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par heros21 »

Rien a faire même combat je suis passé de 8 a 3 mais sa change pas.Je pense plutôt au logiciel qui gère la connection (network ...) car hier soir j'ai mis l'ordi en veille est se matin pas moyen de me connecté plus de wifi a me connecté la liste était vide je pense que ma carte wifi était encore endormi.
Pc fixe ( desktop ), Intel© Pentium© CPU G4400 , GeForce GT 710, 8 GO RAM, Linux Mint 20.3 Cinnamon

Avatar du membre
heros21
Messages : 172
Enregistré le : sam. 16 juil. 2016 00:04

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par heros21 »

J'ai une petite question sur le code :

Code : Tout sélectionner

echo "options rtl8812ae frulps=0" | sudo tee /etc/modprobe.d/rtl8812ae.conf
car je me suis apperçu que le driver de ma carte wifi c'est rtl8821ae et non rtl8812ae rien de grave en soit sauf si je veux changer la veille de la carte via le driver.
Donc ma question est la suivante es-que je dois modifier le code rtl8812ae en rtl8821ae.
Voilà merci de me donner votre avis.
Pc fixe ( desktop ), Intel© Pentium© CPU G4400 , GeForce GT 710, 8 GO RAM, Linux Mint 20.3 Cinnamon

Avatar du membre
mpat
Messages : 7845
Enregistré le : mar. 25 août 2015 21:12
Localisation : Belgique

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par mpat »

salut tu peux me donner un retour de.

Code : Tout sélectionner

modinfo rtl8821ae
et de ( mais je pense qu'ici tu auras module rtl8812ae no found )

Code : Tout sélectionner

modinfo rtl8812ae
exécutes la commande

Code : Tout sélectionner

dmesg | grep cfg80211 
postes le résultat pour voir quelles règles de réglementation tu utilises. C'est généralement là où les canaux sont désactivés.

tu sais aussi trouver les défauts de ta carte et de ta connexion ici

Code : Tout sélectionner

iw phy
Clevo P775DM3-G
I7 -7700k (quad-core (8 threads) 4.2-4.5 ghz
ram 64go DDR4
Nvidia gtx 1080 8go GDDR5X
2 x ssd 500go m.2 Samsung + 2 to ssd Samsung
Lmint 18.3 Cinnamon 64bit, kernel 4.13.0-45

Avatar du membre
heros21
Messages : 172
Enregistré le : sam. 16 juil. 2016 00:04

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par heros21 »

Salut le lève tôt ;) voilà les résultat des commandes :

Code : Tout sélectionner

modinfo rtl8821ae
filename:       /lib/modules/4.4.0-21-generic/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rtl8821ae.ko
firmware:       rtlwifi/rtl8821aefw.bin
description:    Realtek 8821ae 802.11ac PCI wireless
license:        GPL
author:         Realtek WlanFAE	<wlanfae@realtek.com>
srcversion:     B9E24DCC76240A48AEEF94E
alias:          pci:v000010ECd00008821sv*sd*bc*sc*i*
alias:          pci:v000010ECd00008812sv*sd*bc*sc*i*
depends:        rtlwifi,rtl_pci,btcoexist,mac80211
intree:         Y
vermagic:       4.4.0-21-generic SMP mod_unload modversions 
parm:           swenc:Set to 1 for software crypto (default 0)
 (bool)
parm:           ips:Set to 0 to not use link power save (default 1)
 (bool)
parm:           swlps:Set to 1 to use SW control power save (default 0)
 (bool)
parm:           fwlps:Set to 1 to use FW control power save (default 1)
 (bool)
parm:           msi:Set to 1 to use MSI interrupts mode (default 1)
 (bool)
parm:           debug:Set debug level (0-5) (default 0) (int)
parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)
 (bool)
parm:           int_clear:Set to 0 to disable interrupt clear before set (default 1)
 (bool)
la deuxième comme tu t'en doutais :

Code : Tout sélectionner

modinfo rtl8812ae
modinfo: ERROR: Module rtl8812ae not found.
la troisième :

Code : Tout sélectionner

dmesg | grep cfg80211
[   31.746856] cfg80211: World regulatory domain updated:
[   31.746860] cfg80211:  DFS Master region: unset
[   31.746862] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   31.746864] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   31.746865] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   31.746867] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   31.746869] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   31.746871] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   31.746873] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   31.746874] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   31.746876] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
et la dernière :

Code : Tout sélectionner

iw phy
Wiphy phy0
	max # scan SSIDs: 4
	max scan IEs length: 2243 bytes
	RTS threshold: 2347
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Device supports RSN-IBSS.
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP (00-0f-ac:4)
		* 00-0f-ac:10
		* GCMP (00-0f-ac:8)
		* 00-0f-ac:9
		* CMAC (00-0f-ac:6)
		* 00-0f-ac:13
		* 00-0f-ac:11
		* 00-0f-ac:12
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * AP/VLAN
		 * monitor
		 * mesh point
		 * P2P-client
		 * P2P-GO
	Band 1:
		Capabilities: 0x1862
			HT20/HT40
			Static SM Power Save
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT TX/RX MCS rate indexes supported: 0-15, 32
		Bitrates (non-HT):
			* 1.0 Mbps
			* 2.0 Mbps
			* 5.5 Mbps
			* 11.0 Mbps
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 2412 MHz [1] (20.0 dBm)
			* 2417 MHz [2] (20.0 dBm)
			* 2422 MHz [3] (20.0 dBm)
			* 2427 MHz [4] (20.0 dBm)
			* 2432 MHz [5] (20.0 dBm)
			* 2437 MHz [6] (20.0 dBm)
			* 2442 MHz [7] (20.0 dBm)
			* 2447 MHz [8] (20.0 dBm)
			* 2452 MHz [9] (20.0 dBm)
			* 2457 MHz [10] (20.0 dBm)
			* 2462 MHz [11] (20.0 dBm)
			* 2467 MHz [12] (20.0 dBm)
			* 2472 MHz [13] (20.0 dBm)
			* 2484 MHz [14] (disabled)
	Band 2:
		Capabilities: 0x1862
			HT20/HT40
			Static SM Power Save
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT TX/RX MCS rate indexes supported: 0-15, 32
		VHT Capabilities (0x33c019a3):
			Max MPDU length: (reserved)
			Supported Channel Width: neither 160 nor 80+80
			short GI (80 MHz)
			TX STBC
			SU Beamformer
			SU Beamformee
			+HTC-VHT
			RX antenna pattern consistency
			TX antenna pattern consistency
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 867 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 867 Mbps
		Bitrates (non-HT):
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 5180 MHz [36] (30.0 dBm)
			* 5200 MHz [40] (30.0 dBm)
			* 5220 MHz [44] (30.0 dBm)
			* 5240 MHz [48] (30.0 dBm)
			* 5260 MHz [52] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5280 MHz [56] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5300 MHz [60] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5320 MHz [64] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5500 MHz [100] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5520 MHz [104] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5540 MHz [108] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5560 MHz [112] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5580 MHz [116] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5600 MHz [120] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5620 MHz [124] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5640 MHz [128] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5660 MHz [132] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5680 MHz [136] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5700 MHz [140] (30.0 dBm) (no IR, radar detection)
			  DFS state: usable (for 237 sec)
			  DFS CAC time: 0 ms
			* 5745 MHz [149] (30.0 dBm)
			* 5765 MHz [153] (30.0 dBm)
			* 5785 MHz [157] (30.0 dBm)
			* 5805 MHz [161] (30.0 dBm)
			* 5825 MHz [165] (30.0 dBm)
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * new_station
		 * new_mpath
		 * set_mesh_config
		 * set_bss
		 * authenticate
		 * associate
		 * deauthenticate
		 * disassociate
		 * join_ibss
		 * join_mesh
		 * remain_on_channel
		 * set_tx_bitrate_mask
		 * frame
		 * frame_wait_cancel
		 * set_wiphy_netns
		 * set_channel
		 * set_wds_peer
		 * probe_client
		 * set_noack_map
		 * register_beacons
		 * start_p2p_device
		 * set_mcast_rate
		 * Unknown command (104)
		 * connect
		 * disconnect
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0x40 0xb0 0xc0 0xd0
		 * managed: 0x40 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * mesh point: 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-device: 0x40 0xd0
	WoWLAN support:
		 * wake up on magic packet
		 * wake up on pattern match, up to 16 patterns of 13-128 bytes,
		   maximum packet offset 0 bytes
	software interface modes (can always be added):
		 * AP/VLAN
		 * monitor
	interface combinations are not supported
	HT Capability overrides:
		 * MCS: ff ff ff ff ff ff ff ff ff ff
		 * maximum A-MSDU length
		 * supported channel width
		 * short GI for 40 MHz
		 * max A-MPDU length exponent
		 * min MPDU start spacing
	Device supports TX status socket option.
	Device supports HT-IBSS.
	Device supports SAE with AUTHENTICATE command
	Device supports low priority scan.
	Device supports scan flush.
	Device supports AP scan.
	Device supports per-vif TX power setting
	Driver supports a userspace MPM
Voilà tu as tout je te laisse analyser sa car la je coule.... :roll:
Pc fixe ( desktop ), Intel© Pentium© CPU G4400 , GeForce GT 710, 8 GO RAM, Linux Mint 20.3 Cinnamon

Avatar du membre
mpat
Messages : 7845
Enregistré le : mar. 25 août 2015 21:12
Localisation : Belgique

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par mpat »

veux tu essayer ceci puis rebooter et voir si ça marche.

Code : Tout sélectionner

echo "options rtl8821ae swenc=1 ips=0 fwlps=0" | sudo tee /etc/modprobe.d/rtl8821ea.conf
Clevo P775DM3-G
I7 -7700k (quad-core (8 threads) 4.2-4.5 ghz
ram 64go DDR4
Nvidia gtx 1080 8go GDDR5X
2 x ssd 500go m.2 Samsung + 2 to ssd Samsung
Lmint 18.3 Cinnamon 64bit, kernel 4.13.0-45

Avatar du membre
heros21
Messages : 172
Enregistré le : sam. 16 juil. 2016 00:04

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par heros21 »

Bon après quelques essais c'est pas concluant même si c'est mieux, un point que je voulais évoquer quand je fais un ping sa varie énormément je trouve :

Code : Tout sélectionner

ping google.com
PING google.com (172.217.18.238) 56(84) bytes of data.
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=2 ttl=56 time=44.5 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=3 ttl=56 time=35.2 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=5 ttl=56 time=35.8 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=6 ttl=56 time=42.9 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=7 ttl=56 time=35.0 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=8 ttl=56 time=36.0 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=10 ttl=56 time=34.7 ms
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=35 ttl=56 time=36.6 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=37 ttl=56 time=78.3 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=38 ttl=56 time=102 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=39 ttl=56 time=123 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=40 ttl=56 time=35.2 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=41 ttl=56 time=37.3 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=42 ttl=56 time=34.4 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=43 ttl=56 time=35.2 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=44 ttl=56 time=35.4 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=45 ttl=56 time=39.2 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=47 ttl=56 time=36.3 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=49 ttl=56 time=35.3 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=50 ttl=56 time=34.4 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=51 ttl=56 time=35.6 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=52 ttl=56 time=91.3 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=53 ttl=56 time=70.1 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=54 ttl=56 time=53.8 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=56 ttl=56 time=40.6 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=57 ttl=56 time=37.5 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=58 ttl=56 time=76.9 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=59 ttl=56 time=222 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=60 ttl=56 time=39.6 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=61 ttl=56 time=120 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=62 ttl=56 time=216 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=63 ttl=56 time=35.9 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=64 ttl=56 time=48.2 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=65 ttl=56 time=34.0 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=69 ttl=56 time=40.7 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=70 ttl=56 time=35.7 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=71 ttl=56 time=34.1 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=73 ttl=56 time=34.4 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=74 ttl=56 time=44.8 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=76 ttl=56 time=33.9 ms
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
ping: sendmsg: Network is unreachable
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=95 ttl=56 time=42.2 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=96 ttl=56 time=44.1 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=97 ttl=56 time=37.8 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=98 ttl=56 time=34.8 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=100 ttl=56 time=35.0 ms
64 bytes from par10s10-in-f14.1e100.net (172.217.18.238): icmp_seq=101 ttl=56 time=34.2 ms
^C
--- google.com ping statistics ---
101 packets transmitted, 46 received, 54% packet loss, time 100469ms
rtt min/avg/max/mdev = 33.977/54.440/222.616/41.579 ms
Merci a toi mpat pour tes conseils que peut on changer comme réglage pour amélioré.
Pc fixe ( desktop ), Intel© Pentium© CPU G4400 , GeForce GT 710, 8 GO RAM, Linux Mint 20.3 Cinnamon

Avatar du membre
mpat
Messages : 7845
Enregistré le : mar. 25 août 2015 21:12
Localisation : Belgique

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par mpat »

salut ton ping c'est bien mais il dépend de ton débit internet et du serveur auquel tu envois un ping j'ai un résultat différents suivant mes ping.

voici un essai ping. sur 3 server différent lol firefox pas terrible.
Image

Image
Image
Clevo P775DM3-G
I7 -7700k (quad-core (8 threads) 4.2-4.5 ghz
ram 64go DDR4
Nvidia gtx 1080 8go GDDR5X
2 x ssd 500go m.2 Samsung + 2 to ssd Samsung
Lmint 18.3 Cinnamon 64bit, kernel 4.13.0-45

Avatar du membre
heros21
Messages : 172
Enregistré le : sam. 16 juil. 2016 00:04

Re: Problème wifi LM 18 aléatoire sur pc fixe

Message par heros21 »

Je suis d'accord mais avant la modif c'était pire j'ai quand même des pointes aplus de 200 ms et 2 déconnections entre temps.
Pc fixe ( desktop ), Intel© Pentium© CPU G4400 , GeForce GT 710, 8 GO RAM, Linux Mint 20.3 Cinnamon

Répondre