Résolu le 28-12-18 [résolu]démarrage très lent du système

Assistance concernant Linux Mint
blueping
Messages : 30
Enregistré le : jeu. 17 mai 2018 09:28
Localisation : france

Re: démarrage très lent du système

Message par blueping »

Dernier message de la page précédente :

j'ai essayé un autre driver pour ma carte nvidia plus ancien et j'ai récupéré un temps de démarage
acceptable, çà devait être cela donc ?

Code : Tout sélectionner

systemd-analyze
Startup finished in 4.029s (kernel) + 6.638s (userspace) = 10.668s
Modifié en dernier par arghlub le ven. 18 mai 2018 12:13, modifié 1 fois.
Raison : ajout de balises [Code]
Linux Lint 20.1 Cinnamon Cinnamon 4.8.5
Kernel: 5.4.0-73-lowlatency x86_64 bits
Disque SSD 120Go
RAM : 12
CM ASUS P8P67LE
Intel Core i5 2500K 3.30GHzx4
Nvidia GeForce GT610

blueping
Messages : 30
Enregistré le : jeu. 17 mai 2018 09:28
Localisation : france

Re: démarrage très lent du système

Message par blueping »

Voici les réponse des commandes demandées :

$ sudo dmesg |grep ERROR

Code : Tout sélectionner

[    0.077303] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

$ sudo dmesg

Code : Tout sélectionner

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-41-generic (buildd@lgw01-amd64-028) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #46~16.04.1-Ubuntu SMP Thu May 3 10:06:43 UTC 2018 (Ubuntu 4.13.0-41.46~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-41-generic root=UUID=6ae34e92-d9f8-4448-a8c0-fa92e9d23afd ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb8cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000deb8d000-0x00000000df140fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df141000-0x00000000df388fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df389000-0x00000000df395fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df396000-0x00000000df3c0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df3c1000-0x00000000df3c5fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df3c6000-0x00000000df408fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df409000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8P67 LE, BIOS 3603 06/28/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x31f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask F00000000 write-back
[    0.000000]   2 base 300000000 mask FF0000000 write-back
[    0.000000]   3 base 310000000 mask FF8000000 write-back
[    0.000000]   4 base 318000000 mask FFC000000 write-back
[    0.000000]   5 base 31C000000 mask FFE000000 write-back
[    0.000000]   6 base 31E000000 mask FFF000000 write-back
[    0.000000]   7 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 12272M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff915ec00fcd80]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff915ec0097000] 97000 size 24576
[    0.000000] BRK [0x3d32c000, 0x3d32cfff] PGTABLE
[    0.000000] BRK [0x3d32d000, 0x3d32dfff] PGTABLE
[    0.000000] BRK [0x3d32e000, 0x3d32efff] PGTABLE
[    0.000000] BRK [0x3d32f000, 0x3d32ffff] PGTABLE
[    0.000000] BRK [0x3d330000, 0x3d330fff] PGTABLE
[    0.000000] BRK [0x3d331000, 0x3d331fff] PGTABLE
[    0.000000] BRK [0x3d332000, 0x3d332fff] PGTABLE
[    0.000000] BRK [0x3d333000, 0x3d333fff] PGTABLE
[    0.000000] BRK [0x3d334000, 0x3d334fff] PGTABLE
[    0.000000] BRK [0x3d335000, 0x3d335fff] PGTABLE
[    0.000000] BRK [0x3d336000, 0x3d336fff] PGTABLE
[    0.000000] BRK [0x3d337000, 0x3d337fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31de0000-0x34ee7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DF389070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DF393DD8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DF389158 00AC7D (v02 ALASKA A M I    00000015 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DF3BFF80 000040
[    0.000000] ACPI: APIC 0x00000000DF393ED0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DF393F48 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DF393F88 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DF393FC0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DF394330 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DF394CE0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x31efcf000-0x31eff9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000deb8cfff]
[    0.000000]   node   0: [mem 0x00000000df409000-0x00000000df7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031effffff]
[    0.000000] On node 0 totalpages: 3137312
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14207 pages used for memmap
[    0.000000]   DMA32 zone: 909188 pages, LIFO batch:31
[    0.000000]   Normal zone: 34752 pages used for memmap
[    0.000000]   Normal zone: 2224128 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdeb8d000-0xdf140fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf141000-0xdf388fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf389000-0xdf395fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf396000-0xdf3c0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3c1000-0xdf3c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf3c6000-0xdf408fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff9161dec00000 s146584 r8192 d29544 u524288
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3088268
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-41-generic root=UUID=6ae34e92-d9f8-4448-a8c0-fa92e9d23afd ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12209548K/12549248K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2368K init, 2372K bss, 339700K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37858 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3310.829 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.65 BogoMIPS (lpj=13243316)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.011013] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.011030] Security Framework initialized
[    0.011031] Yama: becoming mindful.
[    0.011045] AppArmor: AppArmor initialized
[    0.013263] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.014443] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.014494] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014532] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014688] CPU: Physical Processor ID: 0
[    0.014689] CPU: Processor Core ID: 0
[    0.014693] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014693] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014696] FEATURE SPEC_CTRL Not Present
[    0.014697] mce: CPU supports 9 MCE banks
[    0.014704] CPU0: Thermal monitoring enabled (TM1)
[    0.014711] process: using mwait in idle threads
[    0.014713] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014713] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014715] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.014715] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.014806] Freeing SMP alternatives memory: 36K
[    0.016057] smpboot: Max logical packages: 1
[    0.016445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059195] TSC deadline timer enabled
[    0.059197] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.059247] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.059262] core: PEBS disabled due to CPU errata, please upgrade microcode
[    0.059264] ... version:                3
[    0.059265] ... bit width:              48
[    0.059265] ... generic registers:      8
[    0.059266] ... value mask:             0000ffffffffffff
[    0.059266] ... max period:             00007fffffffffff
[    0.059266] ... fixed-purpose events:   3
[    0.059267] ... event mask:             00000007000000ff
[    0.059296] Hierarchical SRCU implementation.
[    0.059902] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.059916] smp: Bringing up secondary CPUs ...
[    0.059978] x86: Booting SMP configuration:
[    0.059979] .... node  #0, CPUs:      #1 #2 #3
[    0.062372] smp: Brought up 1 node, 4 CPUs
[    0.062372] smpboot: Total of 4 processors activated (26486.63 BogoMIPS)
[    0.064295] devtmpfs: initialized
[    0.064295] x86/mm: Memory block size: 128MB
[    0.064758] evm: security.selinux
[    0.064758] evm: security.SMACK64
[    0.064759] evm: security.SMACK64EXEC
[    0.064759] evm: security.SMACK64TRANSMUTE
[    0.064760] evm: security.SMACK64MMAP
[    0.064760] evm: security.ima
[    0.064761] evm: security.capability
[    0.064770] PM: Registering ACPI NVS region [mem 0xdf141000-0xdf388fff] (2392064 bytes)
[    0.064770] PM: Registering ACPI NVS region [mem 0xdf396000-0xdf3c0fff] (176128 bytes)
[    0.064770] PM: Registering ACPI NVS region [mem 0xdf3c6000-0xdf408fff] (274432 bytes)
[    0.064770] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.064770] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.064770] pinctrl core: initialized pinctrl subsystem
[    0.064770] RTC time: 11:56:59, date: 05/17/18
[    0.064770] NET: Registered protocol family 16
[    0.064770] cpuidle: using governor ladder
[    0.064770] cpuidle: using governor menu
[    0.064770] PCCT header not found.
[    0.064770] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.064770] ACPI: bus type PCI registered
[    0.064770] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.064770] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.064770] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.064770] PCI: Using configuration type 1 for base access
[    0.064770] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.064770] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.065048] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.065048] ACPI: Added _OSI(Module Device)
[    0.065048] ACPI: Added _OSI(Processor Device)
[    0.065048] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.065048] ACPI: Added _OSI(Processor Aggregator Device)
[    0.065048] ACPI: Executed 1 blocks of module-level executable AML code
[    0.070023] ACPI: Dynamic OEM Table Load:
[    0.070023] ACPI: SSDT 0xFFFF9161D01E1000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.070023] ACPI: Dynamic OEM Table Load:
[    0.070023] ACPI: SSDT 0xFFFF9161D015A400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.070023] ACPI: Dynamic OEM Table Load:
[    0.070023] ACPI: SSDT 0xFFFF9161D015C400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.070024] ACPI: EC: EC started
[    0.070024] ACPI: EC: interrupt blocked
[    0.070024] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.070024] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.070024] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.070024] ACPI: Interpreter enabled
[    0.070024] ACPI: (supports S0 S1 S3 S4 S5)
[    0.070024] ACPI: Using IOAPIC for interrupt routing
[    0.070024] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.070024] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.076536] ACPI: Power Resource [FN00] (off)
[    0.076596] ACPI: Power Resource [FN01] (off)
[    0.076655] ACPI: Power Resource [FN02] (off)
[    0.076713] ACPI: Power Resource [FN03] (off)
[    0.076773] ACPI: Power Resource [FN04] (off)
[    0.077209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.077213] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.077303] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.077605] PCI host bridge to bus 0000:00
[    0.077607] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.077608] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.077609] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.077611] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.077612] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.077613] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.077614] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.077615] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.077616] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.077617] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.077618] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.077625] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.077694] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.077721] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.077801] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.077824] pci 0000:00:16.0: reg 0x10: [mem 0xf740b000-0xf740b00f 64bit]
[    0.077892] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.077956] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.077976] pci 0000:00:1a.0: reg 0x10: [mem 0xf7408000-0xf74083ff]
[    0.078054] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.078115] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.078134] pci 0000:00:1b.0: reg 0x10: [mem 0xf7400000-0xf7403fff 64bit]
[    0.078202] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.078270] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.078407] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.078483] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[    0.078560] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.078623] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.078700] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.078764] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.078841] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.078904] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.078980] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.079043] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.079063] pci 0000:00:1d.0: reg 0x10: [mem 0xf7407000-0xf74073ff]
[    0.079141] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.079200] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[    0.079352] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.079368] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.079374] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.079381] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.079387] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.079394] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.079400] pci 0000:00:1f.2: reg 0x24: [mem 0xf7406000-0xf74067ff]
[    0.079436] pci 0000:00:1f.2: PME# supported from D3hot
[    0.079490] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.079507] pci 0000:00:1f.3: reg 0x10: [mem 0xf7405000-0xf74050ff 64bit]
[    0.079526] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.079620] pci 0000:01:00.0: [10de:104a] type 00 class 0x030000
[    0.079634] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.079642] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.079650] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.079655] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.079661] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.079729] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[    0.079740] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.088023] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.088027] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.088030] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.088035] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.088122] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.088195] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060401
[    0.088335] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[    0.088338] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.088341] pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.088346] pci 0000:00:1c.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.088347] pci 0000:00:1c.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.088348] pci 0000:00:1c.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.088349] pci 0000:00:1c.4:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.088350] pci 0000:00:1c.4:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.088351] pci 0000:00:1c.4:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.088353] pci 0000:00:1c.4:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.088354] pci 0000:00:1c.4:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.088355] pci 0000:00:1c.4:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.088356] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.088409] pci 0000:04:02.0: [104c:8020] type 00 class 0x0c0010
[    0.088447] pci 0000:04:02.0: reg 0x10: [mem 0xf7305000-0xf73057ff]
[    0.088464] pci 0000:04:02.0: reg 0x14: [mem 0xf7300000-0xf7303fff]
[    0.088595] pci 0000:04:02.0: supports D2
[    0.088596] pci 0000:04:02.0: PME# supported from D2 D3hot
[    0.088639] pci 0000:04:03.0: [1106:3044] type 00 class 0x0c0010
[    0.088676] pci 0000:04:03.0: reg 0x10: [mem 0xf7304000-0xf73047ff]
[    0.088693] pci 0000:04:03.0: reg 0x14: [io  0xd000-0xd07f]
[    0.088822] pci 0000:04:03.0: supports D2
[    0.088823] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
[    0.088913] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[    0.088922] pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff]
[    0.088927] pci 0000:03:00.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.088935] pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff] (subtractive decode)
[    0.088937] pci 0000:03:00.0:   bridge window [mem 0xf7300000-0xf73fffff] (subtractive decode)
[    0.088939] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.088940] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.088941] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.088942] pci 0000:03:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.088943] pci 0000:03:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.088944] pci 0000:03:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.088945] pci 0000:03:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.088946] pci 0000:03:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.088947] pci 0000:03:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.088948] pci 0000:03:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.089018] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.089052] pci 0000:05:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.089084] pci 0000:05:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.089104] pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.089212] pci 0000:05:00.0: supports D1 D2
[    0.089214] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.100027] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.100032] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.100041] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.100133] pci 0000:06:00.0: [1b4b:9130] type 00 class 0x010601
[    0.100160] pci 0000:06:00.0: reg 0x10: [io  0xb090-0xb097]
[    0.100171] pci 0000:06:00.0: reg 0x14: [io  0xb080-0xb083]
[    0.100183] pci 0000:06:00.0: reg 0x18: [io  0xb070-0xb077]
[    0.100195] pci 0000:06:00.0: reg 0x1c: [io  0xb060-0xb063]
[    0.100206] pci 0000:06:00.0: reg 0x20: [io  0xb050-0xb05f]
[    0.100218] pci 0000:06:00.0: reg 0x24: [mem 0xf7221000-0xf72217ff]
[    0.100230] pci 0000:06:00.0: reg 0x30: [mem 0xf7210000-0xf721ffff pref]
[    0.100243] pci 0000:06:00.0: Enabling fixed DMA alias to 00.1
[    0.100293] pci 0000:06:00.0: PME# supported from D3hot
[    0.100356] pci 0000:06:00.1: [1b4b:91a4] type 00 class 0x01018f
[    0.100382] pci 0000:06:00.1: reg 0x10: [io  0xb040-0xb047]
[    0.100394] pci 0000:06:00.1: reg 0x14: [io  0xb030-0xb033]
[    0.100405] pci 0000:06:00.1: reg 0x18: [io  0xb020-0xb027]
[    0.100417] pci 0000:06:00.1: reg 0x1c: [io  0xb010-0xb013]
[    0.100429] pci 0000:06:00.1: reg 0x20: [io  0xb000-0xb00f]
[    0.100440] pci 0000:06:00.1: reg 0x24: [mem 0xf7220000-0xf722000f]
[    0.100452] pci 0000:06:00.1: reg 0x30: [mem 0xf7200000-0xf720ffff pref]
[    0.100515] pci 0000:06:00.1: PME# supported from D3hot
[    0.112023] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.112028] pci 0000:00:1c.6:   bridge window [io  0xb000-0xbfff]
[    0.112033] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.112135] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.112175] pci 0000:07:00.0: reg 0x10: [mem 0xf7100000-0xf7107fff 64bit]
[    0.112329] pci 0000:07:00.0: PME# supported from D3hot D3cold
[    0.124022] pci 0000:00:1c.7: PCI bridge to [bus 07]
[    0.124029] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.124479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.124518] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.124556] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.124595] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.124633] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.124670] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.124707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.124744] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.124952] ACPI: EC: interrupt unblocked
[    0.124957] ACPI: EC: event unblocked
[    0.124962] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.124963] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.125114] SCSI subsystem initialized
[    0.125121] libata version 3.00 loaded.
[    0.125121] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.125121] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.125121] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.125121] vgaarb: loaded
[    0.125121] ACPI: bus type USB registered
[    0.125121] usbcore: registered new interface driver usbfs
[    0.125121] usbcore: registered new interface driver hub
[    0.125121] usbcore: registered new device driver usb
[    0.125121] EDAC MC: Ver: 3.0.0
[    0.125121] PCI: Using ACPI for IRQ routing
[    0.125364] PCI: pci_cache_line_size set to 64 bytes
[    0.125427] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.125428] e820: reserve RAM buffer [mem 0xdeb8d000-0xdfffffff]
[    0.125430] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.125430] e820: reserve RAM buffer [mem 0x31f000000-0x31fffffff]
[    0.125496] NetLabel: Initializing
[    0.125497] NetLabel:  domain hash size = 128
[    0.125497] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.125509] NetLabel:  unlabeled traffic allowed by default
[    0.125520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.125520] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.128013] clocksource: Switched to clocksource hpet
[    0.135537] VFS: Disk quotas dquot_6.6.0
[    0.135557] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.135636] AppArmor: AppArmor Filesystem Enabled
[    0.135677] pnp: PnP ACPI init
[    0.135772] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.135776] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.135844] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.135845] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.135847] system 00:01: [io  0xffff] has been reserved
[    0.135848] system 00:01: [io  0xffff] has been reserved
[    0.135849] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.135850] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.135852] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.135853] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.135855] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.135874] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.135912] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.135914] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.135979] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.135981] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136038] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.136040] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136206] pnp 00:06: [dma 0 disabled]
[    0.136243] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.136394] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.136395] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.136397] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.136398] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.136399] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.136401] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.136402] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.136403] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.136405] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.136406] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.136407] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[    0.136409] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.136499] pnp: PnP ACPI: found 8 devices
[    0.142309] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.142329] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.142331] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.142334] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.142378] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff]
[    0.142383] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.142385] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.142387] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.142389] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.142391] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.142393] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.142395] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.142398] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.142401] pci 0000:00:1c.0:   bridge window [mem 0xe0100000-0xe02fffff]
[    0.142405] pci 0000:00:1c.0:   bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.142412] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.142415] pci 0000:03:00.0:   bridge window [io  0xd000-0xdfff]
[    0.142422] pci 0000:03:00.0:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.142435] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[    0.142437] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.142441] pci 0000:00:1c.4:   bridge window [mem 0xf7300000-0xf73fffff]
[    0.142448] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.142450] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.142455] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.142461] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.142463] pci 0000:00:1c.6:   bridge window [io  0xb000-0xbfff]
[    0.142466] pci 0000:00:1c.6:   bridge window [mem 0xf7200000-0xf72fffff]
[    0.142474] pci 0000:00:1c.7: PCI bridge to [bus 07]
[    0.142477] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
[    0.142485] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.142486] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.142487] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.142489] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.142490] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.142491] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.142492] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.142493] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.142494] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.142495] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.142497] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.142498] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.142499] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.142500] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.142501] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe02fffff]
[    0.142502] pci_bus 0000:02: resource 2 [mem 0xe0300000-0xe04fffff 64bit pref]
[    0.142503] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.142504] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.142505] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.142507] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.142508] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.142509] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.142510] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.142511] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.142512] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.142513] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.142514] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.142515] pci_bus 0000:03: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.142517] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.142518] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
[    0.142519] pci_bus 0000:04: resource 4 [io  0xd000-0xdfff]
[    0.142520] pci_bus 0000:04: resource 5 [mem 0xf7300000-0xf73fffff]
[    0.142521] pci_bus 0000:04: resource 6 [io  0x0000-0x0cf7 window]
[    0.142522] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.142523] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.142524] pci_bus 0000:04: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.142525] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.142527] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.142528] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.142529] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.142530] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.142531] pci_bus 0000:04: resource 15 [mem 0xe0000000-0xfeafffff window]
[    0.142532] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.142533] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.142535] pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
[    0.142536] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[    0.142537] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff]
[    0.142601] NET: Registered protocol family 2
[    0.142730] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.142896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.143008] TCP: Hash tables configured (established 131072 bind 65536)
[    0.143039] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.143080] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.143133] NET: Registered protocol family 1
[    0.404137] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.404275] PCI: CLS 64 bytes, default 64
[    0.404308] Unpacking initramfs...
[    0.988745] Freeing initrd memory: 50208K
[    0.988768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.988770] software IO TLB [mem 0xdab8d000-0xdeb8d000] (64MB) mapped at [ffff915f9ab8d000-ffff915f9eb8cfff]
[    0.988970] Scanning for low memory corruption every 60 seconds
[    0.989191] audit: initializing netlink subsys (disabled)
[    0.989222] audit: type=2000 audit(1526558218.989:1): state=initialized audit_enabled=0 res=1
[    0.989500] Initialise system trusted keyrings
[    0.989507] Key type blacklist registered
[    0.989527] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.990373] zbud: loaded
[    0.990724] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.990815] fuse init (API version 7.26)
[    0.991721] Key type asymmetric registered
[    0.991722] Asymmetric key parser 'x509' registered
[    0.991741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.991767] io scheduler noop registered
[    0.991767] io scheduler deadline registered
[    0.991787] io scheduler cfq registered (default)
[    0.992366] intel_idle: MWAIT substates: 0x1120
[    0.992367] intel_idle: v0.4.1 model 0x2A
[    0.992463] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.992538] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.992556] ACPI: Power Button [PWRB]
[    0.992581] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.992594] ACPI: Power Button [PWRF]
[    0.993018] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.993116] thermal LNXTHERM:00: registered as thermal_zone0
[    0.993117] ACPI: Thermal Zone [TZ00] (28 C)
[    0.993277] thermal LNXTHERM:01: registered as thermal_zone1
[    0.993278] ACPI: Thermal Zone [TZ01] (30 C)
[    0.993309] GHES: HEST is not enabled!
[    0.993402] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.013894] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.015136] Linux agpgart interface v0.103
[    1.016306] loop: module loaded
[    1.016422] libphy: Fixed MDIO Bus: probed
[    1.016423] tun: Universal TUN/TAP device driver, 1.6
[    1.016445] PPP generic driver version 2.4.2
[    1.016473] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.016475] ehci-pci: EHCI PCI platform driver
[    1.016555] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.016559] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.016570] ehci-pci 0000:00:1a.0: debug port 2
[    1.020457] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.020467] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7408000
[    1.036014] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.036041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.036043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036044] usb usb1: Product: EHCI Host Controller
[    1.036045] usb usb1: Manufacturer: Linux 4.13.0-41-generic ehci_hcd
[    1.036046] usb usb1: SerialNumber: 0000:00:1a.0
[    1.036182] hub 1-0:1.0: USB hub found
[    1.036188] hub 1-0:1.0: 2 ports detected
[    1.036341] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.036344] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.036354] ehci-pci 0000:00:1d.0: debug port 2
[    1.040262] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.040266] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7407000
[    1.056071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.056124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.056127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.056130] usb usb2: Product: EHCI Host Controller
[    1.056132] usb usb2: Manufacturer: Linux 4.13.0-41-generic ehci_hcd
[    1.056134] usb usb2: SerialNumber: 0000:00:1d.0
[    1.056285] hub 2-0:1.0: USB hub found
[    1.056290] hub 2-0:1.0: 2 ports detected
[    1.056379] ehci-platform: EHCI generic platform driver
[    1.056386] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.056389] ohci-pci: OHCI PCI platform driver
[    1.056396] ohci-platform: OHCI generic platform driver
[    1.056400] uhci_hcd: USB Universal Host Controller Interface driver
[    1.056461] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.056465] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    1.063421] xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.063554] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.063555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.063556] usb usb3: Product: xHCI Host Controller
[    1.063557] usb usb3: Manufacturer: Linux 4.13.0-41-generic xhci-hcd
[    1.063558] usb usb3: SerialNumber: 0000:07:00.0
[    1.063701] hub 3-0:1.0: USB hub found
[    1.063711] hub 3-0:1.0: 2 ports detected
[    1.063774] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.063777] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[    1.068644] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.068657] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.068658] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068659] usb usb4: Product: xHCI Host Controller
[    1.068660] usb usb4: Manufacturer: Linux 4.13.0-41-generic xhci-hcd
[    1.068661] usb usb4: SerialNumber: 0000:07:00.0
[    1.068791] hub 4-0:1.0: USB hub found
[    1.068800] hub 4-0:1.0: 2 ports detected
[    1.068884] i8042: PNP: No PS/2 controller found.
[    1.068884] i8042: Probing ports directly.
[    1.071356] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.071360] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.071543] mousedev: PS/2 mouse device common for all mice
[    1.071713] rtc_cmos 00:02: RTC can wake from S4
[    1.071831] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.071855] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.071860] i2c /dev entries driver
[    1.071892] device-mapper: uevent: version 1.0.3
[    1.071935] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.071939] intel_pstate: Intel P-state driver initializing
[    1.072223] ledtrig-cpu: registered to indicate activity on CPUs
[    1.072571] NET: Registered protocol family 10
[    1.076438] Segment Routing with IPv6
[    1.076453] NET: Registered protocol family 17
[    1.076460] Key type dns_resolver registered
[    1.076770] RAS: Correctable Errors collector initialized.
[    1.076825] microcode: sig=0x206a7, pf=0x2, revision=0x25
[    1.076874] microcode: Microcode Update Driver: v2.2.
[    1.076998] sched_clock: Marking stable (1076871431, 0)->(1084521198, -7649767)
[    1.077120] registered taskstats version 1
[    1.077126] Loading compiled-in X.509 certificates
[    1.079155] Loaded X.509 cert 'Build time autogenerated kernel key: 455b6c2f89645ccacce587853289bc763cf1d7aa'
[    1.079168] zswap: loaded using pool lzo/zbud
[    1.082011] Key type big_key registered
[    1.082013] Key type trusted registered
[    1.083403] Key type encrypted registered
[    1.083405] AppArmor: AppArmor sha1 policy hashing enabled
[    1.083407] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.083423] evm: HMAC attrs: 0x1
[    1.083693]   Magic number: 2:328:934
[    1.083785] rtc_cmos 00:02: setting system clock to 2018-05-17 11:57:00 UTC (1526558220)
[    1.083816] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.083816] EDD information not available.
[    1.083844] PM: Hibernation image not present or could not be loaded.
[    1.085917] Freeing unused kernel memory: 2368K
[    1.085918] Write protecting the kernel read-only data: 18432k
[    1.086393] Freeing unused kernel memory: 2024K
[    1.086550] Freeing unused kernel memory: 88K
[    1.088199] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.088200] x86/mm: Checking user space page tables
[    1.089514] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.142273] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.142280] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.142633] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffa38d018c1000, f4:6d:04:04:ca:c2, XID 0c200000 IRQ 29
[    1.142634] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.145730] scsi host0: pata_marvell
[    1.149192] scsi host1: pata_marvell
[    1.149224] ata1: PATA max UDMA/100 cmd 0xb040 ctl 0xb030 bmdma 0xb000 irq 19
[    1.149225] ata2: PATA max UDMA/133 cmd 0xb020 ctl 0xb010 bmdma 0xb008 irq 19
[    1.160962] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    1.164630] ahci 0000:00:1f.2: version 3.0
[    1.174872] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
[    1.174875] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.200248] firewire_ohci 0000:04:02.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.224591] scsi host2: ahci
[    1.224838] scsi host3: ahci
[    1.224982] scsi host4: ahci
[    1.225228] scsi host5: ahci
[    1.225378] scsi host6: ahci
[    1.225457] scsi host7: ahci
[    1.225494] ata3: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406100 irq 30
[    1.225495] ata4: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406180 irq 30
[    1.225497] ata5: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406200 irq 30
[    1.225497] ata6: DUMMY
[    1.225499] ata7: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406300 irq 30
[    1.225500] ata8: SATA max UDMA/133 abar m2048@0xf7406000 port 0xf7406380 irq 30
[    1.235770] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    1.235772] ahci 0000:06:00.0: flags: 64bit ncq pio 
[    1.236361] scsi host8: ahci
[    1.236483] scsi host9: ahci
[    1.236709] scsi host10: ahci
[    1.236829] scsi host11: ahci
[    1.236903] scsi host12: ahci
[    1.237008] scsi host13: ahci
[    1.237081] scsi host14: ahci
[    1.237140] scsi host15: ahci
[    1.237170] ata9: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221100 irq 31
[    1.237172] ata10: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221180 irq 31
[    1.237174] ata11: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221200 irq 31
[    1.237176] ata12: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221280 irq 31
[    1.237178] ata13: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221300 irq 31
[    1.237180] ata14: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221380 irq 31
[    1.237182] ata15: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221400 irq 31
[    1.237184] ata16: SATA max UDMA/133 abar m2048@0xf7221000 port 0xf7221480 irq 31
[    1.272171] firewire_ohci 0000:04:03.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
[    1.368066] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.384064] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.452064] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.516769] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.516770] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.517106] hub 1-1:1.0: USB hub found
[    1.517284] hub 1-1:1.0: 6 ports detected
[    1.532415] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.532419] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.532643] hub 2-1:1.0: USB hub found
[    1.532886] hub 2-1:1.0: 8 ports detected
[    1.539020] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.539144] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.539159] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.539764] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.539875] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.540101] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.540202] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.540308] ata3.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133
[    1.540310] ata3.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.540451] ata5.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    1.540454] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.540561] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.540581] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.540885] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.540994] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.541216] ata3.00: configured for UDMA/133
[    1.541480] scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JS-75N 2E04 PQ: 0 ANSI: 5
[    1.541570] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.541678] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.541966] ata5.00: configured for UDMA/133
[    1.542254] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.542360] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.542464] ata7.00: ATAPI: Optiarc DVD RW AD-7230S, 1.83, max UDMA/100
[    1.544451] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.544553] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.544659] ata7.00: configured for UDMA/100
[    1.546259] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.546424] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.546687] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[    1.546690] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.550290] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.550454] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.550679] ata10: SATA link down (SStatus 0 SControl 300)
[    1.550741] ata12: SATA link down (SStatus 0 SControl 300)
[    1.550770] ata15: SATA link down (SStatus 0 SControl 300)
[    1.550817] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.550842] ata11: SATA link down (SStatus 0 SControl 300)
[    1.550875] ata9: SATA link down (SStatus 0 SControl 300)
[    1.550906] ata13: SATA link down (SStatus 0 SControl 300)
[    1.550951] ata14: SATA link down (SStatus 0 SControl 300)
[    1.550972] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[    1.551140] ata16.00: configured for UDMA/66
[    1.552330] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.552493] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.552752] ata4.00: configured for UDMA/133
[    1.555833] ata8.00: ATA-8: KINGSTON SV300S37A120G, 525ABBF0, max UDMA/133
[    1.555835] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.571264] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.571429] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.576673] ata8.00: configured for UDMA/133
[    1.584325] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.584460] sd 2:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/233 GiB)
[    1.584472] sd 2:0:0:0: [sda] Write Protect is off
[    1.584474] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.584487] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103SJ  0001 PQ: 0 ANSI: 5
[    1.584492] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.591676]  sda: sda1 sda2
[    1.591930] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.620279] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.620311] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.620322] sd 3:0:0:0: [sdb] Write Protect is off
[    1.620323] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.620344] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.620456] scsi 4:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    1.629406]  sdb: sdb1
[    1.630502] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.652327] usb 3-1: New USB device found, idVendor=0409, idProduct=005a
[    1.652329] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.654190] hub 3-1:1.0: USB hub found
[    1.654246] hub 3-1:1.0: 4 ports detected
[    1.672237] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    1.672307] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.672318] sd 4:0:0:0: [sdc] Write Protect is off
[    1.672320] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.672336] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.673460] scsi 6:0:0:0: CD-ROM            Optiarc  DVD RW AD-7230S  1.83 PQ: 0 ANSI: 5
[    1.692931]  sdc: sdc1
[    1.693516] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.701640] sr 6:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.701642] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.701793] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.701886] sr 6:0:0:0: Attached scsi generic sg3 type 5
[    1.702000] scsi 7:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.724155] firewire_core 0000:04:02.0: created device fw0: GUID 003095263002757b, S400
[    1.740194] sd 7:0:0:0: Attached scsi generic sg4 type 0
[    1.740277] sd 7:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.740285] sd 7:0:0:0: [sdd] Write Protect is off
[    1.740287] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.740305] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.740458] scsi 15:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
[    1.740531] scsi 15:0:0:0: Attached scsi generic sg5 type 3
[    1.744147]  sdd: sdd1 sdd2 < sdd5 sdd6 >
[    1.744686] sd 7:0:0:0: [sdd] Attached SCSI disk
[    1.788149] firewire_core 0000:04:03.0: created device fw1: GUID 001fc600000df478, S400
[    1.804020] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    1.820016] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.832016] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[    1.914665] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6364
[    1.914668] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.914671] usb 1-1.3: Product: Mass Storage Device
[    1.914673] usb 1-1.3: Manufacturer: Generic
[    1.914675] usb 1-1.3: SerialNumber: 058F63646476
[    1.917463] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    1.917593] scsi host16: usb-storage 1-1.3:1.0
[    1.917647] usbcore: registered new interface driver usb-storage
[    1.917733] hidraw: raw HID events driver (C) Jiri Kosina
[    1.918671] usbcore: registered new interface driver uas
[    1.920051] usbcore: registered new interface driver usbhid
[    1.920052] usbhid: USB HID core driver
[    1.921238] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.3/input1
[    1.936026] usb 2-1.1: New USB device found, idVendor=04f9, idProduct=0027
[    1.936029] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.936031] usb 2-1.1: Product: HL-2030 series
[    1.936034] usb 2-1.1: Manufacturer: Brother
[    1.936036] usb 2-1.1: SerialNumber: H8J171644
[    2.012070] tsc: Refined TSC clocksource calibration: 3310.800 MHz
[    2.012080] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fb9265f317, max_idle_ns: 440795256718 ns
[    2.016069] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[    2.042012] usb 3-2: New USB device found, idVendor=413c, idProduct=3016
[    2.042016] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.042018] usb 3-2: Product: Dell Premium USB Optical Mouse
[    2.048240] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb3/3-2/3-2:1.0/0003:413C:3016.0002/input/input5
[    2.048516] hid-generic 0003:413C:3016.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:07:00.0-2/input0
[    2.116057] usb 3-1.1: new full-speed USB device number 4 using xhci_hcd
[    2.126131] usb 2-1.2: New USB device found, idVendor=045e, idProduct=00f7
[    2.126132] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.126133] usb 2-1.2: Product: USB camera
[    2.204062] usb 2-1.5: new low-speed USB device number 5 using ehci-pci
[    2.230959] usb 3-1.1: New USB device found, idVendor=08bb, idProduct=2900
[    2.230962] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.230965] usb 3-1.1: Product: USB Audio CODEC 
[    2.230967] usb 3-1.1: Manufacturer: Burr-Brown from TI              
[    2.233999] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb3/3-1/3-1.1/3-1.1:1.3/0003:08BB:2900.0003/input/input6
[    2.292276] hid-generic 0003:08BB:2900.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:07:00.0-1.1/input3
[    2.320165] usb 2-1.5: New USB device found, idVendor=413c, idProduct=2107
[    2.320169] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.320171] usb 2-1.5: Product: Dell USB Entry Keyboard
[    2.320173] usb 2-1.5: Manufacturer: Dell
[    2.324431] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:413C:2107.0004/input/input7
[    2.372061] usb 3-1.2: new full-speed USB device number 5 using xhci_hcd
[    2.384307] hid-generic 0003:413C:2107.0004: input,hidraw3: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.5/input0
[    2.464062] usb 2-1.6: new full-speed USB device number 6 using ehci-pci
[    2.484323] usb 3-1.2: New USB device found, idVendor=2381, idProduct=0020
[    2.484325] usb 3-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.484326] usb 3-1.2: Product: ProdipeMIDIlilo 
[    2.574333] usb 2-1.6: New USB device found, idVendor=04a9, idProduct=2220
[    2.574336] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.574339] usb 2-1.6: Product: CanoScan
[    2.574341] usb 2-1.6: Manufacturer: Canon
[    2.941137] scsi 16:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    2.941886] scsi 16:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    2.942623] scsi 16:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    2.943394] scsi 16:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    2.943672] sd 16:0:0:0: Attached scsi generic sg6 type 0
[    2.943815] sd 16:0:0:1: Attached scsi generic sg7 type 0
[    2.943920] sd 16:0:0:2: Attached scsi generic sg8 type 0
[    2.944020] sd 16:0:0:3: Attached scsi generic sg9 type 0
[    2.975490] sd 16:0:0:0: [sde] Attached SCSI removable disk
[    2.977618] sd 16:0:0:1: [sdf] Attached SCSI removable disk
[    2.978371] sd 16:0:0:2: [sdg] Attached SCSI removable disk
[    2.979118] sd 16:0:0:3: [sdh] Attached SCSI removable disk
[    3.036290] clocksource: Switched to clocksource tsc
[    3.500001] raid6: sse2x1   gen()  9499 MB/s
[    3.547995] raid6: sse2x1   xor()  7415 MB/s
[    3.595994] raid6: sse2x2   gen() 12028 MB/s
[    3.643997] raid6: sse2x2   xor()  8631 MB/s
[    3.691994] raid6: sse2x4   gen() 13821 MB/s
[    3.739994] raid6: sse2x4   xor() 10534 MB/s
[    3.739995] raid6: using algorithm sse2x4 gen() 13821 MB/s
[    3.739995] raid6: .... xor() 10534 MB/s, rmw enabled
[    3.739996] raid6: using ssse3x2 recovery algorithm
[    3.741033] xor: automatically using best checksumming function   avx       
[    3.754760] Btrfs loaded, crc32c=crc32c-intel
[    3.810872] random: crng init done
[    3.948090] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    4.063302] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.080140] systemd[1]: Detected architecture x86-64.
[    4.080419] systemd[1]: Set hostname to <XazzDesktop>.
[    4.166932] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    4.166997] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.167025] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.167044] systemd[1]: Listening on udev Kernel Socket.
[    4.167067] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.167073] systemd[1]: Reached target Remote File Systems (Pre).
[    4.167093] systemd[1]: Listening on Syslog Socket.
[    4.210421] lp: driver loaded but no devices found
[    4.213137] ppdev: user-space parallel port driver
[    4.386086] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro
[    4.401182] systemd-journald[413]: Received request to flush runtime journal from PID 1
[    4.491641] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[    4.491646] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.491648] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    4.491651] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170531/utaddress-247)
[    4.491654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.491654] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    4.491657] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170531/utaddress-247)
[    4.491659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.491659] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    4.491662] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20170531/utaddress-247)
[    4.491664] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20170531/utaddress-247)
[    4.491667] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.491667] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.520563] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.606842] nvidia: loading out-of-tree module taints kernel.
[    4.606846] nvidia: module license 'NVIDIA' taints kernel.
[    4.606847] Disabling lock debugging due to kernel taint
[    4.610526] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    4.614934] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    4.615142] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[    4.615146] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.104  Thu Sep 14 17:13:13 PDT 2017
[    4.624140] media: Linux media interface: v0.10
[    4.631745] Linux video capture interface: v2.00
[    4.638353] gspca_main: v2.14.0 registered
[    4.655773] snd_hda_intel 0000:01:00.1: Disabling MSI
[    4.655777] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.658050] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[    4.658121] usbcore: registered new interface driver usblp
[    4.660695] gspca_main: sonixj-2.14.0 probing 045e:00f7
[    4.661891] input: sonixj as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/input/input8
[    4.662027] usbcore: registered new interface driver sonixj
[    4.672433] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    4.672435] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.672436] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.672437] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.672438] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    4.672439] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.672441] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.672442] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.672443] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.685850] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.685887] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.685921] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.685955] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.685988] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.686020] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.686051] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    4.686085] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    4.699934] Adding 3938300k swap on /dev/sdd6.  Priority:-1 extents:1 across:3938300k SSFS
[    4.702153] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    4.702154] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    4.702155] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.702155] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    4.722561] AVX version of gcm_enc/dec engaged.
[    4.722562] AES CTR mode by8 optimization enabled
[    4.724295] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)
[    4.765875] usbcore: registered new interface driver snd-usb-audio
[    4.807896] asus_wmi: ASUS WMI generic driver loaded
[    4.812360] asus_wmi: Initialization: 0x0
[    4.812379] asus_wmi: BIOS WMI version: 0.9
[    4.812549] asus_wmi: SFUN value: 0x0
[    4.812784] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input17
[    4.813801] kvm: disabled by bios
[    4.818130] asus_wmi: Number of fans: 1
[    5.489813] intel_rapl: Found RAPL domain package
[    5.489815] intel_rapl: Found RAPL domain core
[    5.489820] intel_rapl: RAPL package 0 domain package locked by BIOS
[    5.492575] nvidia_uvm: Loaded the UVM driver, major device number 242
[    5.492811] audit: type=1400 audit(1526558224.909:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=973 comm="apparmor_parser"
[    5.492813] audit: type=1400 audit(1526558224.909:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=973 comm="apparmor_parser"
[    5.493868] audit: type=1400 audit(1526558224.910:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=974 comm="apparmor_parser"
[    5.493871] audit: type=1400 audit(1526558224.910:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=974 comm="apparmor_parser"
[    5.493872] audit: type=1400 audit(1526558224.910:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=974 comm="apparmor_parser"
[    5.493874] audit: type=1400 audit(1526558224.910:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=974 comm="apparmor_parser"
[    5.493886] audit: type=1400 audit(1526558224.910:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=976 comm="apparmor_parser"
[    5.494643] audit: type=1400 audit(1526558224.910:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=977 comm="apparmor_parser"
[    5.494645] audit: type=1400 audit(1526558224.910:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=977 comm="apparmor_parser"
[    5.535678] new mount options do not match the existing superblock, will be ignored
[    5.728724] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18
[    5.728768] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19
[    5.922350] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    6.071923] r8169 0000:05:00.0 enp5s0: link down
[    6.071935] r8169 0000:05:00.0 enp5s0: link down
[    6.071972] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[    7.629613] r8169 0000:05:00.0 enp5s0: link up
[    7.629624] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[   10.544545] usblp1: removed
[   10.551640] usblp 2-1.1:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[   14.957886] retire_capture_urb: 4 callbacks suppressed
[   19.960492] retire_capture_urb: 4869 callbacks suppressed
Modifié en dernier par arghlub le ven. 18 mai 2018 12:13, modifié 1 fois.
Raison : ajout de balises [code] au retour de la 1ere commande
Linux Lint 20.1 Cinnamon Cinnamon 4.8.5
Kernel: 5.4.0-73-lowlatency x86_64 bits
Disque SSD 120Go
RAM : 12
CM ASUS P8P67LE
Intel Core i5 2500K 3.30GHzx4
Nvidia GeForce GT610

blueping
Messages : 30
Enregistré le : jeu. 17 mai 2018 09:28
Localisation : france

Re: démarrage très lent du système

Message par blueping »

+1 pour les histoires de grub multiples
Le mieux c'est d'en avoir un maitre puis de "chainloader" les autres (il me semble que ce soit ce terme)
je ne comprends pas bience que veut dire "chainloeader" désolé, je dois avoir un grub opérationnel sur un disque et effacer les eventuels grub sur les autres disc c'est çà ?

vous le conseilleriez grub2 sur le disque SSD ou est installé mint ? (le système principal) et aucun grub ?

il me faut un cd boot repair pour effacer les eventuels grub des autres HDD ?
Linux Lint 20.1 Cinnamon Cinnamon 4.8.5
Kernel: 5.4.0-73-lowlatency x86_64 bits
Disque SSD 120Go
RAM : 12
CM ASUS P8P67LE
Intel Core i5 2500K 3.30GHzx4
Nvidia GeForce GT610

Avatar du membre
cyrille
Administrateur du site
Messages : 12285
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: démarrage très lent du système

Message par cyrille »

Sans doute pas de gros bugs dans ton dmesg
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Avatar du membre
Gerinald
Messages : 907
Enregistré le : dim. 22 janv. 2017 10:40
Localisation : Manage (Belgique)

Re: démarrage très lent du système

Message par Gerinald »

Hello,

Pour ta carte, si tu ne fait rien de spécial, tu peut mettre le driver Libre ... il fonctionne super bien et lors de mise à jour du noyau, il te cause moins de problème ;)

Bat
Gerinald
Distro : LM-19,1 - Cinnamon 4.0.8 - Kernel 4.18.5-041805-generic
PC : AMD Athlon II X2 250 duo, CG : NVIDIA GT218 [GeForce 210] sur pilote "Nouveau", 4 Go de mémoire vive

blueping
Messages : 30
Enregistré le : jeu. 17 mai 2018 09:28
Localisation : france

Re: démarrage très lent du système

Message par blueping »

c'est justement le driver que j'avais avant...
mais je ne suis pas certain que c'était çà le problème ? mon grub a changé de tête ...
Linux Lint 20.1 Cinnamon Cinnamon 4.8.5
Kernel: 5.4.0-73-lowlatency x86_64 bits
Disque SSD 120Go
RAM : 12
CM ASUS P8P67LE
Intel Core i5 2500K 3.30GHzx4
Nvidia GeForce GT610

Répondre