Problème après installation de Mint 20.2 sur un PC Acer
Problème après installation de Mint 20.2 sur un PC Acer
Ce sujet fait suite à mon sujet sur le dual-boot windows 10, et les galères que j'ai eu. Avec changement du DD.
Après avoir tourné sans problèmes toute la journée, voilà qu'hier soir je le redémarre, et qu'il ne veut pas
Après avoir tourné sans problèmes toute la journée, voilà qu'hier soir je le redémarre, et qu'il ne veut pas
HP Notebook 17-by0045nf
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
- arghlub
- Administrateur du site
- Messages : 10421
- Enregistré le : dim. 21 mai 2017 08:19
- Localisation : Provence
- Contact :
Re: Problème après installation de Mint 20.2 sur un PC Acer
Salut,
Si tu tapes «exit», ça donne quoi ?
Si tu tapes «exit», ça donne quoi ?
Tour1 (custom) • CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
- cyrille
- Administrateur du site
- Messages : 12424
- Enregistré le : mar. 19 sept. 2017 08:49
- Localisation : Nowhere
- Contact :
Re: Problème après installation de Mint 20.2 sur un PC Acer
COmme demandé dans le message
Pour savoir ce qui le chagrine
Et je testerai le disque depuis liveCD
-fsck
-hdparm
Code : Tout sélectionner
journalctl -xb
Et je testerai le disque depuis liveCD
-fsck
-hdparm
Re: Problème après installation de Mint 20.2 sur un PC Acer
Ça tourne en boucle, en relançant le démarrage, puis les deux messages.
HP Notebook 17-by0045nf
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Re: Problème après installation de Mint 20.2 sur un PC Acer
Voici le retour des deux commandes :
Code : Tout sélectionner
To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.
mint@mint:~$ fsck
fsck from util-linux 2.34
mint@mint:~$ hdparm
hdparm - get/set hard disk parameters - version v9.58, by Mark Lord.
clue=6
Usage: hdparm [options] [device ...]
Options:
-a Get/set fs readahead
-A Get/set the drive look-ahead flag (0/1)
-b Get/set bus state (0 == off, 1 == on, 2 == tristate)
-B Set Advanced Power Management setting (1-255)
-c Get/set IDE 32-bit IO setting
-C Check drive power mode status
-d Get/set using_dma flag
-D Enable/disable drive defect management
-E Set cd/dvd drive speed
-f Flush buffer cache for device on exit
-F Flush drive write cache
-g Display drive geometry
-h Display terse usage information
-H Read temperature from drive (Hitachi only)
-i Display drive identification
-I Detailed/current information directly from drive
-J Get/set Western DIgital "Idle3" timeout for a WDC "Green" drive (DANGEROUS)
-k Get/set keep_settings_over_reset flag (0/1)
-K Set drive keep_features_over_reset flag (0/1)
-L Set drive doorlock (0/1) (removable harddisks only)
-m Get/set multiple sector count
-M Get/set acoustic management (0-254, 128: quiet, 254: fast)
-n Get/set ignore-write-errors flag (0/1)
-N Get/set max visible number of sectors (HPA) (VERY DANGEROUS)
-p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)
-P Set drive prefetch count
-q Change next setting quietly
-Q Get/set DMA queue_depth (if supported)
-r Get/set device readonly flag (DANGEROUS to set)
-R Get/set device write-read-verify flag
-s Set power-up in standby flag (0/1) (DANGEROUS)
-S Set standby (spindown) timeout
-t Perform device read timings
-T Perform cache read timings
-u Get/set unmaskirq flag (0/1)
-U Obsolete
-v Use defaults; same as -acdgkmur for IDE drives
-V Display program version and exit immediately
-w Perform device reset (DANGEROUS)
-W Get/set drive write-caching flag (0/1)
-x Obsolete
-X Set IDE xfer mode (DANGEROUS)
-y Put drive in standby mode
-Y Put drive to sleep
-z Re-read partition table
-Z Disable Seagate auto-powersaving mode
--dco-freeze Freeze/lock current device configuration until next power cycle
--dco-identify Read/dump device configuration identify data
--dco-restore Reset device configuration back to factory defaults
--dco-setmax Use DCO to set maximum addressable sectors
--direct Use O_DIRECT to bypass page cache for timings
--drq-hsm-error Crash system with a "stuck DRQ" error (VERY DANGEROUS)
--fallocate Create a file without writing data to disk
--fibmap Show device extents (and fragmentation) for a file
--fwdownload Download firmware file to drive (EXTREMELY DANGEROUS)
--fwdownload-mode3 Download firmware using min-size segments (EXTREMELY DANGEROUS)
--fwdownload-mode3-max Download firmware using max-size segments (EXTREMELY DANGEROUS)
--fwdownload-mode7 Download firmware using a single segment (EXTREMELY DANGEROUS)
--fwdownload-modee Download firmware using mode E (min-size segments) (EXTREMELY DANGEROUS)
--fwdownload-modee-max Download firmware using mode E (max-size segments) (EXTREMELY DANGEROUS)
--idle-immediate Idle drive immediately
--idle-unload Idle immediately and unload heads
--Iraw filename Write raw binary identify data to the specfied file
--Istdin Read identify data from stdin as ASCII hex
--Istdout Write identify data to stdout as ASCII hex
--make-bad-sector Deliberately corrupt a sector directly on the media (VERY DANGEROUS)
--offset use with -t, to begin timings at given offset (in GiB) from start of drive
--prefer-ata12 Use 12-byte (instead of 16-byte) SAT commands when possible
--read-sector Read and dump (in hex) a sector directly from the media
--repair-sector Alias for the --write-sector option (VERY DANGEROUS)
--sanitize-antifreeze-lock Block sanitize-freeze-lock command until next power cycle
--sanitize-block-erase Start block erase operation
--sanitize-crypto-scramble Change the internal encryption keys that used for used data
--sanitize-freeze-lock Lock drive's sanitize features until next power cycle
--sanitize-overwrite PATTERN Overwrite the internal media with constant PATTERN
--sanitize-status Show sanitize status information
--security-help Display help for ATA security commands
--set-sector-size Change logical sector size of drive
--trim-sector-ranges Tell SSD firmware to discard unneeded data sectors: lba:count ..
--trim-sector-ranges-stdin Same as above, but reads lba:count pairs from stdin
--verbose Display extra diagnostics from some commands
--write-sector Repair/overwrite a (possibly bad) sector directly on the media (VERY DANGEROUS)
mint@mint:~$
HP Notebook 17-by0045nf
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
- cyrille
- Administrateur du site
- Messages : 12424
- Enregistré le : mar. 19 sept. 2017 08:49
- Localisation : Nowhere
- Contact :
Re: Problème après installation de Mint 20.2 sur un PC Acer
Tu ne peux passer ces commandes sans attributs
Si la partition a tester est la sda1
Et
hdparm : je me suis planté je voulais dire smartctl (du paquet smartmontools) (dsl, mal réveillé)
(sinon hdparm prend aussi des arguments), cf man hdparm )
(cf https://cbiot.fr/dokuwiki/freebsd-smartmontools )
mais que te raconte
quand tu arrives à ce message d'erreur ?
Code : Tout sélectionner
sudo fsck /dev/sda1
Et
hdparm : je me suis planté je voulais dire smartctl (du paquet smartmontools) (dsl, mal réveillé)
(sinon hdparm prend aussi des arguments), cf man hdparm )
Code : Tout sélectionner
sudo smartctl -a /dev/sda
mais que te raconte
Code : Tout sélectionner
journalctl -xb
Re: Problème après installation de Mint 20.2 sur un PC Acer
Depuis l'autre sujet :
Comme c'est un ancien disque dur, récupéré sur une machine qui a été remplacé.
Si, j'ai testé la commande "journalctl -xb" et "systemctl reboot", sans résultat.
C'est bien possible que le DD soit bousillé. Vu les lignes qu'il fait défiler.
Comme c'est un ancien disque dur, récupéré sur une machine qui a été remplacé.
Si, j'ai testé la commande "journalctl -xb" et "systemctl reboot", sans résultat.
HP Notebook 17-by0045nf
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
- cyrille
- Administrateur du site
- Messages : 12424
- Enregistré le : mar. 19 sept. 2017 08:49
- Localisation : Nowhere
- Contact :
Re: Problème après installation de Mint 20.2 sur un PC Acer
y avait il un retour d'affiché ?j'ai testé la commande "journalctl -xb"
Sinon reste les 2 autres options depuis live CD (fsck et smartctl)
Re: Problème après installation de Mint 20.2 sur un PC Acer
La première ligne de commande :
J'ai arrêté là, car ça va continuer encore longtemps, apparemment.
Code : Tout sélectionner
mint@mint:~$ sudo fsck /dev/sda
fsck from util-linux 2.34
e2fsck 1.45.5 (07-Jan-2020)
/dev/sda is in use.
e2fsck: Cannot continue, aborting.
mint@mint:~$ sudo fsck /dev/sda1
fsck from util-linux 2.34
fsck.fat 4.1 (2017-01-24)
0x25: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
1) Remove dirty bit
2) No action
? 2
/dev/sda1: 12 files, 1345/48768 clusters
mint@mint:~$ sudo fsck /dev/sda6
fsck from util-linux 2.34
e2fsck 1.45.5 (07-Jan-2020)
/dev/sda6: clean, 345523/2138112 files, 2402614/8544768 blocks
mint@mint:~$ sudo fsck /dev/sda7
fsck from util-linux 2.34
e2fsck 1.45.5 (07-Jan-2020)
/dev/sda7 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Inode 16124813 extent tree (at level 1) could be shorter. Optimize<y>? yes
Error reading block 119570451 (Input/output error). Ignore error<y>? yes
Force rewrite<y>? yes
Inode 29884687 has an invalid extent node (blk 119570451, lblk 0)
Clear<y>? yes
Inode 29884687 extent tree (at level 1) could be shorter. Optimize<y>? yes
Inode 29884687, i_blocks is 4520, should be 0. Fix<y>? yes
Error reading block 119570452 (Input/output error). Ignore error<y>? yes
Force rewrite<y>? yes
Inode 29884688 has an invalid extent node (blk 119570452, lblk 0)
Clear<y>? yes
Inode 29884688 extent tree (at level 1) could be shorter. Optimize ('a' enables 'yes' to all) <y>? yes
Inode 29884688, i_blocks is 4456, should be 0. Fix ('a' enables 'yes' to all) <y>? yes
Error reading block 119570469 (Input/output error). Ignore error ('a' enables 'yes' to all) <y>?
HP Notebook 17-by0045nf
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Re: Problème après installation de Mint 20.2 sur un PC Acer
La deuxième commande ( pour le disque " / " ) :
Code : Tout sélectionner
mint@mint:~$ sudo smartctl -a /dev/sda6
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-74-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..65GSX
Device Model: TOSHIBA MK6465GSXN
Serial Number: Y0UJS0LOS
LU WWN Device Id: 5 000039 2e5f0a0d2
Firmware Version: GH101M
User Capacity: 640 135 028 736 bytes [640 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Sep 4 09:33:24 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 200) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1975
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6904
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 9
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 5601
10 Spin_Retry_Count 0x0033 237 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6884
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 21
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 65562
193 Load_Cycle_Count 0x0032 088 088 000 Old_age Always - 123985
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 (Min/Max 14/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 8
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 5
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 117
222 Loaded_Hours 0x0032 089 089 000 Old_age Always - 4590
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 335
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 529 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 529 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 62 2a a1 8e 6d Error: UNC at LBA = 0x0d8ea12a = 227451178
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 60 28 a1 8e 40 00 01:05:47.037 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 01:05:47.037 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 01:05:47.037 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 01:05:47.036 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:05:47.035 IDENTIFY DEVICE
Error 528 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 5a 2a a1 8e 6d Error: UNC at LBA = 0x0d8ea12a = 227451178
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 28 a1 8e 40 00 01:05:42.612 READ FPDMA QUEUED
60 08 50 20 a1 8e 40 00 01:05:42.612 READ FPDMA QUEUED
60 08 48 18 a1 8e 40 00 01:05:42.612 READ FPDMA QUEUED
60 08 40 10 a1 8e 40 00 01:05:42.611 READ FPDMA QUEUED
60 08 38 08 a1 8e 40 00 01:05:42.611 READ FPDMA QUEUED
Error 527 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 b2 a3 a0 8e 6d Error: UNC at LBA = 0x0d8ea0a3 = 227451043
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b0 a0 a0 8e 40 00 01:04:57.170 READ FPDMA QUEUED
61 08 90 98 a0 8e 40 00 01:04:57.170 WRITE FPDMA QUEUED
ef 10 03 00 00 00 a0 00 01:04:57.170 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 01:04:57.170 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 01:04:57.170 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 526 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 ba a3 a0 8e 6d Error: UNC at LBA = 0x0d8ea0a3 = 227451043
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 b8 a0 a0 8e 40 00 01:04:47.399 READ FPDMA QUEUED
60 08 b0 70 a0 4a 40 00 01:04:37.672 READ FPDMA QUEUED
60 08 a8 00 a0 4a 40 00 01:04:37.657 READ FPDMA QUEUED
60 08 a0 00 a0 0a 40 00 01:04:37.642 READ FPDMA QUEUED
60 08 98 08 a0 ca 40 00 01:04:37.642 READ FPDMA QUEUED
Error 525 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 7a 9f a0 8e 6d Error: UNC at LBA = 0x0d8ea09f = 227451039
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 78 98 a0 8e 40 00 01:04:07.326 READ FPDMA QUEUED
ef 10 03 00 00 00 a0 00 01:04:07.325 SET FEATURES [Enable SATA feature]
ef 10 02 00 00 00 a0 00 01:04:07.325 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 01:04:07.325 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:04:07.324 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
mint@mint:~$
HP Notebook 17-by0045nf
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44
Intel Core i3-7020U-CPU 2.20GHz x 2
RAM 3.7 Go
Carte Graphique Intel HD Graphics 620
-------------------------------------------------------------------------------
PC de Bureau: Linux Mint 20.2 Cinnamon - Kernel 5.4.0-81
Intel© Core™ i5-9400F CPU @ 2.90GHz × 6
RAM 7.7 Go
Carte Graphique Nvidia GeForce GT 730
Carte Son Roland Rubix 44