XFCE sur LMDE et autologin

[Bateson]

Bonjour,

j'ai installé LMDE 5 sur Virtualbox, parce que je voulais le tester et que l'idée de se passer d'Ubuntu m'intéresse. Mais voila t'il pas qu'a l'installation, la seule possibilité est de mettre Cinnamon, et, depuis que je tourne avec XFCE, je préfère

J'ai donc installé, en ligne de commande, XFCE. Sauf que, comme je suis un peu feignasse et que personne ne vient fouiner sur mon PC, à l'instal de LMDE, j'ai coché la connexion automatique , et du coup si je veux activer XFCE, je dois me déconnecter pour le lancer.

J"ai trouvé des tutos pour se mettre en autologin mais pas pour le supprimer.

C'est pas une question vitale, au pire, je supprime la machine virtuelle et je la réinstalle sans autologin, mais si au passage je peux apprendre quelque chose...

Sinon question annexe, est il possible de supprimer Cinnamon, et de se connecter directement XFCE, je veux dire sur LMDE.

Merci à tous,

Jean-Jacques

[Jennatux]

Bonjour,

Normalement si tu te déconnectes de Cinnamon et que tu choisis Xfce , que tu soit en demarrage avec ou sans mot de passe , tu redémarreras sur Xfce
il n'est pas nécessaire de supprimer la connexion automatique

[arghlub]

Salut,

Tu peux configurer l'écran de connexion dans le fichier /etc/lightdm/lightdm.conf, donne-nous son contenu avec cette commande en terminal :

Code : Tout sélectionner

cat /etc/lightdm/lightdm.conf

[dan06]

Bonjour,
Pour ma part, j'ai carrément supprimé Cinnamon et installé le bureau Maté.
Et en procédant ainsi, tu n'aurais plus de souci avec le démarrage auto...
Bonne journée

[Bateson]

Salur,

Retour de la commande:

Code : Tout sélectionner

jean-jacques@jeanjacques-All-Series:~$ cat /etc/lightdm/lightdm.conf
[Seat:*]
autologin-guest=false
autologin-user=jean-jacques
autologin-user-timeout=0
jean-jacques@jeanjacques-All-Series:~$ 

Ceci dit je suis aussi ok pour supprimer Cinnamon, pour deux raisons, je suis sur une machine virtuelle et donc pas avec un énorme disque (40 G) et j'ai laissé toutes mes VM sur le SSD système, et puis comme il m"arrive de filer des coups de main, autant apprendre à le faire. Euh c'est quoi la manoeuvre ?

Merci à vous

[dan06]

Voilà ce que je fais pour installer Maté à la place de Cinnamon :

Code : Tout sélectionner

sudo apt update
sudo apt install mate-desktop-environment

Reboot et choix Maté

Code : Tout sélectionner

sudo apt autoremove '^cinnamon.*' --purge

Après tu peux peaufiner un peu en retirant quelques petits outils Gnome qui restent en double :

Code : Tout sélectionner

sudo apt autoremove baobab gnome-calculator gnome-screenshot gnome-system-monitor xreader xed pix file-roller

Walawala

[Bateson]

Oups ! pardon Arghlub, je me suis planté. En fait j'ai lancé ta commande mais sur mon système principal, par sur la VM LMDE 5. Et le retour de commande n'est pas du tout le même:

Code : Tout sélectionner

[code]jjb@lmde:~$ cat /etc/lightdm/lightdm.conf
#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
# dbus-service = True if LightDM provides a D-Bus service to control it
#

[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
#logind-check-graphical=false
#log-directory=/var/log/lightdm
#run-directory=/var/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
#backup-logs=true
#dbus-service=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (local, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-backend = X backend to use (mir)
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#

[Seat:*]
#type=local
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-backend=
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
#greeter-session=example-gtk-gnome
greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
#session-wrapper=lightdm-session
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
autologin-user=jjb
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
greeter-show-manual-login=false

[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#

[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8
jjb@lmde:~$

Désolé, et merci à toi