Raté de connexion Ethernet

[alain]

Dernier message de la page précédente :

Bonjour Dudu.

Est ce que le partage de connexion usb d'un téléphone fonctionne?
Je pensais que tu procédais comme cela pour nous fournir les captures de ton 1er post.
Ça serait plus facile pour toi que d'avoir à enregistrer tes retours dans des fichiers puis de les transférer sur un autre pc.
Je pense que le partage de connexion fonctionne car, dans tes retours, on voit que que tout fonctionne du PC à la box, mais qu'une configuration soit de NetworkManager soit de ta box est mal faite (dhcp, ip, autres?)

Aux vues de tes réponses, je me pose une question. As tu aussi modifié des paramètres dans ta box?
Je n'y connais pas grand chose en protocole internet, mais par hasard, tu n'aurais pas bloqué une IP sur ton PC? Dans la configuration de la box bien sur. Ça pourrait expliqué si l'IP local de ton PC est différente de celle bloquée (statique) dans ta box. Ce n'est qu'une idée.

Quelle box as tu?

En espérant que ça serve à un pro de la com internet, que donne:

Code : Tout sélectionner

journalctl -u NetworkManager -f &

Et donnes le retour demandé par Cyrille:

Voir le contenu de ce torchon.sh , histoire de savoir ce que tu as fait passer au système serait une bonne idée

[Dudu69]

Oui, excuse moi cyrille
J'ai toucher a plusieurs commandes pour mes essais, voici les commandes principales :

Code : Tout sélectionner

#Un peu de cela...
    ifconfig enp1s0 down > /dev/null
    cyberghostvpn --stop > /dev/null
    pkill -TERM firefox > /dev/null
    service NetworkManager stop > /dev/null

#Nettoyage PC
echo "Nettoyage du System : "
echo " "
echo "Suppression des fichiers /var/cache/apt..."
apt-get clean -y > /dev/null
echo "Suppression des vieux noyaux... "
apt-get purge -y $(dpkg --get-selections linux-headers-[0-9]* linux-image-[0-9]* | awk '{print $1}' | grep -v $(uname -r | cut -d"-" -f-2)) > /dev/null
echo "Suppression des Dépendances inutile : " 
apt-get autoremove --purge -y
apt-get remove -y $(deborphan) > /dev/null
echo "Suppression de la Corbeille..."
rm -r -f ~/.local/share/Trash/*/*
echo " "
read -p "Continuer (O/n)? : " int1
var1=$int1
clear

#On continue...

# Activation de la Connexion Internet
service NetworkManager start
ifconfig enp1s0 up
clear

#Etape 1 : Selection IP local et DNS
echo "Bienvenu dans la Config de ton résau Internet!"
echo "Choisi une machine libre sur ton resau local !"
echo "Selectionne une machine pour completer ton IP local (SFR) !" 
    read -p "IP : 192.168.1." int1
        IPlocal=$int1
clear


echo "Ton adresse IP local : 192.168.1.$IPlocal (SFR)"
echo " "
echo "Choisi ton DNS ! (Broadcast)"
echo "Exemple : a1. DNS SFR 192.168.1.255" 
echo "          a2. DNS Google : 8.8.8.8"
echo " "
    read -p "IP DNS : " int2
        broadcast=$int2


echo "Configuration du resau"
    ifconfig enp1s0 192.168.1.$IPlocal netmask 255.255.255.0 broadcast $broadcast
    ifconfig enp1s0 mtu 1500
    service NetworkManager restart
    clear

echo "Ton IP local : 192.168.1.$IPlocal (SFR)"
echo "Etat de la connexion :"
    ifconfig


#Etape 2 : Tester sa connexion en PING
echo " "
echo "Tester sa connexion local 'PING' ? (O/N) :"
    read -p "" int3
        var1=$int3


if [ $var1 == "O" ]; then
    clear
    echo "Resultats PING de ta machine :"
        ping -c 5 localhost
    echo " "
    echo "Resultats PING de ton routeur (SFR)"
        ping -c 5 192.168.1.1
else
    clear

#Quelque Maj
#Mise a Jour du System (MAJ)
echo "Récupération des Dépots Officiel : "
apt-get update -y
echo " "
echo "Installations des Mises à Jour : "
apt-get dist-upgrade
echo " "
apt-get full-upgrade -y
echo " "
read -p "Continuer (O/n)? : " int2
clear

#Check Package utile
echo "Check des Packages utiles :"
apt-get install steam:i386
apt-get install wine
apt-get install virtualbox-qt
apt-get install kodi
apt-get install gparted
apt-get install gedit
apt-get install grsync
read -p "Continuer (O/n)? : " int3
clear

#VPN
#Connexion Internet via VPN
echo "Activation de la Connexion Internet via VPN :"
echo " "
echo "Liste des nations :"
cyberghostvpn --country-code
read -p "Choisisser une Nation : " int2
nation=$int2
clear

echo "Connexion..."
cyberghostvpn --country-code $nation --openvpn --connect
clear

echo "Etat de la connexion :"
cyberghostvpn --status
echo "Ton adresse IP : "
curl ifconfig.io
echo " "
read -p "Continuer (O/n)? : " int3
        var2=$int3
if [ $var2 != n ]; then
    clear
else
    exit 1
fi

Et pour la commande journalctl -u NetworkManager -f &

Code : Tout sélectionner

janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.0926] device (enp1s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.0931] device (enp1s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.0939] manager: NetworkManager state is now CONNECTED_LOCAL
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.0962] manager: NetworkManager state is now CONNECTED_SITE
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.0964] policy: set 'Connexion Ethernet 1' (enp1s0) as default for IPv4 routing and DNS
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.1027] device (enp1s0): Activation: successful, device activated.
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.1036] manager: startup complete
janv. 13 14:45:26 System NetworkManager[767]: <info>  [1673617526.2327] manager: NetworkManager state is now CONNECTED_GLOBAL
janv. 13 14:45:27 System NetworkManager[767]: <info>  [1673617527.8418] policy: set 'Connexion Ethernet 1' (enp1s0) as default for IPv6 routing and DNS
janv. 13 14:45:40 System NetworkManager[767]: <info>  [1673617540.4934] agent-manager: agent[da2d78c1cb0e3bd7,:1.53/org.freedesktop.nm-applet/1000]: agent registered

C'est difficile de dévoiler sons talent de programmateur a des pros....

[Dudu69]

Je n'ai aussi jamais modifié les paramètres de ma box SFR
Mes autres appareils fonctionnent bien

J'ai eu une erreur lors de l'installation du VPN
Installation non complètes mais le VPN marchait jusqu'au lendemain...
Déjà eu des petits soucis avec lui sur Win10 aussi...

Je ne sais pas si j'ai une connexion bloqué par mon routeur cela m’étonnerait...
J'utilise la 192.168.1.46 avec des applis connu...

[Dudu69]

Ma connexion USB ne fonctionne pas non plus...

Code : Tout sélectionner

usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.231.112  netmask 255.255.255.0  broadcast 192.168.231.255
        inet6 fe80::ff76:26f4:b468:99ef  prefixlen 64  scopeid 0x20<link>
        ether 5e:79:72:3d:80:6a  txqueuelen 1000  (Ethernet)
        RX packets 31  bytes 4093 (4.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 97  bytes 16240 (16.2 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[cyrille]

Dur dur ce script....
Tu devrais le découper en sous script pour le debugguer

Faire gaffe à la syntaxe également, y a plein de coquilles, de mal formation, mais on verra ça après.

Si tu le lances ce script, ça donne quoi , il retourne des erreurs ?

Si tu peux les copier ?

AUssi tu fais un

Code : Tout sélectionner

sudo dmesg -w

Tu lances le script et tu postes les lignes qui se sont éventuellement ajoutées à la commande précédente


Tu peux poster le retour de

Code : Tout sélectionner

sudo dmesg | egrep 'err|firm|fail|war'

Et sinon il est censé faire quoi ce script ?


As tu essayé de ré initialiser ta connexion ethernet via l'applet de network manager ?

[Dudu69]

J'ai essayé avec l'applet mais rien ne change... Connecter mais pas internet ni même les dépôts officiel

Je me rattrape en disant que mes script était mieux formuler lors du lancement mais trop long avec des questions/réponse inutile...
J'ai sélectionner les commandes qui influe sur mon réseaux et n'ai pas chercher a vous les reformuler dsl c'est moche...
J'enregistre surtout les commandes que j'utilise, fait des essai, me renseigne beaucoup (tuto, forum....) et apprend

Mon Script est censé se lancer au démarrage de mon PC quasi quotidiennement
Je l'ai donc aussi redécouper en 6 parties :
1. Couper toute connexion (correctement, + appli inutile en arrière plan)
2. Nettoyage en profondeur du PC (tout ko inutile)
3. Sélection de mon adresse IP local et mon DNS ou changement d'eux
4. Activation de ma connexion Internet + Teste de connexion
5. Mise à jour PC
6. Connexion à mon VPN
7. Le n° 7 = n°1

Voilà un peu l'idée...

Pour ce qui est des commande je vous les envoies au plus vite

[Dudu69]

Bon lorsque je lance la commande dmesg -w la commande ne se stop pas, donc je dois ouvrir un autre terminal pour lancer la commande suivante....
Et pas de retour!

Comment on arrête une commande en cour pour reprendre la main?
Je suis sur que vous vous tapez le front quand vous lisez ça lol désolé

[cyrille]

Quand je parlais de mauvaise formulation c'est plus sur le fond.

Exemple

Code : Tout sélectionner

apt-get install steam:i386
apt-get install wine
apt-get install virtualbox-qt
apt-get install kodi
apt-get install gparted

Et si le paquet est déjà installé ? Pas la peine de le réinstaller (surtout que la bonne commande serait reinstall pas install)

Donc fait un test sur la présence ou du paquet
Exemple pour rfkill

Code : Tout sélectionner

dpkg -s rfkill  &> /dev/null

if [ $? -eq 0 ]; then
    echo -e "\nrfkill est installé. Continuons.\n"
else
    echo -e "\nrfkill n'est pas installé. Installons le !\n"
    apt-get install -y rfkill 
fi

Test retours à la ligne echo "" --> préfère un truc style "premiere ligne suivui d'un saut de ligne \n"


Les assignations de variables sur sortie de commande ont cette syntaxe
lsHome=$(ls -l /home/$USER)


Pourquoi les doublements de variables, style ?

Code : Tout sélectionner

    read -p "IP DNS : " int2
        broadcast=$int2

Et pas directement

Code : Tout sélectionner

    read -p "IP DNS : " broadcast

_ _ _ _

Code : Tout sélectionner

echo "Ton adresse IP : "
curl ifconfig.io

Pour conniatre ses ipv4 et V6, ces commandes sont plus pertinentes

Code : Tout sélectionner

curl https://api.ipify.org?format=json
curl https://api64.ipify.org?format=json

Code : Tout sélectionner

#Etape 1 : Selection IP local et DNS
echo "Bienvenu dans la Config de ton résau Internet!"
echo "Choisi une machine libre sur ton resau local !"
echo "Selectionne une machine pour completer ton IP local (SFR) !" 
    read -p "IP : 192.168.1." int1
        IPlocal=$int1
clear

Ne serait il pas plus pertinent de passer des 2 variables en arguments de ton shell script
tonScript IP PASSERELLE
Et tu les récupèrer dans les variables $1 et $2 directement

Bien tu sûr tu testes si ces arguments sont présents en début de script, exemple à dapter

Code : Tout sélectionner

# Test si existence parametre IP 
if [[ -z "$1" ]]
  then
    echo "Ce suite nécessite un argument ...."
    exit
fi

Je présume que ton script nécessite les droits root,
Bien aussi de tester que c'est le cas en début de script

Code : Tout sélectionner

# Test des droits d'execution
if [[ $EUID -ne 0 ]]; then
   echo "Ce script doit être lancé en root ou via sudo" 
   exit 1
fi

Bon voilà ce n'est pas une critique, mais des conseils pour t'aider à progresser
Je te conseille qq lectures complémentaires
https://debian-facile.org/doc:programma ... parametres
https://fr.wikibooks.org/wiki/Programmation_Bash
https://bash.cyberciti.biz/guide/Main_Page
http://www.dartmouth.edu/~rc/classes/ksh/index.html



ENsuite pour ce qui est du soucis de connexion internet, comme tu as du saisir pas mal de choses , il y a du avoir beaucoup de conséquences qui vont être difficiles à démélées !
Es tu sur qu'une réinstallation n'irait pas plus vite (haibutellement je suis contre, mais là...)

Sur le fond du script, as tu une nécessite particulière à couper la connexion la réseau, ré initialiser l'IP et les DNS, le VPN

Perso, je pense que tu devrais scinder le script entre
---> ce qui touche l'admin (update)
---> ce qui touche le nettoyage
--> ce qui touche le réseau

Idem les apt-get avec -y peuvent te jouer des tours, en cas de soucis et de questions particulières du sytème (c'est tjs hasardeux de répondre par oui par défaut)

Mes 2 sous

[cyrille]

Comment on arrête une commande en cour pour reprendre la main?

Controle +c

Mais celle là faut la laisser tourner en toile de fond et regarder les lignes qui s'ajoutent

Et copier / coller pour sauvegarder sa sortie

[Dudu69]

Merci t'es conseils me sont très utiles, je prend note
Reboot irait beaucoup plus vite mais c'est un peu comme échouer lol

Je n'ai pas réellement besoin de modifier ou redémarrer mon IP à chaque démarrage
Mais j'aimerai savoir le faire correctement sans planter ma connexion
Le tout avec des questions réponse car je trouve ça plus simple pour moi
Je m'informe et j'en ferai un sujet je pense
Mais avant...
- Je regroupe ou sépare correctement mes commandes et les reformules en petit script organiser.
- Je recommence les tests de mes scripts et sauvegarde les retours

Ensuite...
Lors de la commande dmesg -w j'ai 3 lignes rouge mais pas de retour d'err avec la commande suivante...
Je ne sais pas si cela te sera utile...

Code : Tout sélectionner

0fff]
[    0.088822] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.088823] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.088825] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.088826] PM: hibernation: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.088829] PM: hibernation: Registered nosave memory: [mem 0xdf690000-0xdf69dfff]
[    0.088830] PM: hibernation: Registered nosave memory: [mem 0xdf69e000-0xdf6cffff]
[    0.088832] PM: hibernation: Registered nosave memory: [mem 0xdf6d0000-0xdf6ddfff]
[    0.088833] PM: hibernation: Registered nosave memory: [mem 0xdf6de000-0xdf6dffff]
[    0.088835] PM: hibernation: Registered nosave memory: [mem 0xdf6e0000-0xdf6fffff]
[    0.088836] PM: hibernation: Registered nosave memory: [mem 0xdf700000-0xdf7fffff]
[    0.088838] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xdfffffff]
[    0.088839] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[    0.088840] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.088842] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.088843] PM: hibernation: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.088846] [mem 0xe0000000-0xfedfffff] available for PCI devices
[    0.088848] Booting paravirtualized kernel on bare hardware
[    0.088853] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.088865] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.089694] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288
[    0.089705] pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152
[    0.089710] pcpu-alloc: [0] 0 1 2 3 
[    0.089762] Built 1 zonelists, mobility grouping on.  Total pages: 2061749
[    0.089768] Policy zone: Normal
[    0.089770] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-57-generic root=UUID=75916704-2698-4b59-be02-98732f57e73c ro quiet splash
[    0.089880] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-57-generic", will be passed to user space.
[    0.092304] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.093556] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.093641] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.227163] Memory: 8005116K/8378544K available (16393K kernel code, 4378K rwdata, 10812K rodata, 3232K init, 6568K bss, 373168K reserved, 0K cma-reserved)
[    0.227657] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.227689] Kernel/User page tables isolation: enabled
[    0.227725] ftrace: allocating 50532 entries in 198 pages
[    0.258717] ftrace: allocated 198 pages with 4 groups
[    0.258979] rcu: Hierarchical RCU implementation.
[    0.258982] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.258984] 	Rude variant of Tasks RCU enabled.
[    0.258986] 	Tracing variant of Tasks RCU enabled.
[    0.258987] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.258989] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.265656] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.265935] Console: colour dummy device 80x25
[    0.265954] printk: console [tty0] enabled
[    0.265994] ACPI: Core revision 20210730
[    0.266126] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.266143] APIC: Switch to symmetric I/O mode setup
[    0.266513] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.286142] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22985e54521, max_idle_ns: 440795274892 ns
[    0.286152] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.08 BogoMIPS (lpj=9600164)
[    0.286157] pid_max: default: 32768 minimum: 301
[    0.286240] LSM: Security Framework initializing
[    0.286262] landlock: Up and running.
[    0.286264] Yama: becoming mindful.
[    0.286315] AppArmor: AppArmor initialized
[    0.286428] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.286470] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.286955] CPU0: Thermal monitoring enabled (TM2)
[    0.286969] process: using mwait in idle threads
[    0.286974] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.286976] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.286981] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.286984] Spectre V2 : Mitigation: Retpolines
[    0.286986] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.286987] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.286988] Speculative Store Bypass: Vulnerable
[    0.286992] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.286993] MMIO Stale Data: Unknown: No mitigations
[    0.312483] Freeing SMP alternatives memory: 40K
[    0.424151] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
[    0.424466] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.424477] core: PEBS disabled due to CPU errata
[    0.424479] ... version:                2
[    0.424480] ... bit width:              40
[    0.424482] ... generic registers:      2
[    0.424483] ... value mask:             000000ffffffffff
[    0.424484] ... max period:             000000007fffffff
[    0.424486] ... fixed-purpose events:   3
[    0.424487] ... event mask:             0000000700000003
[    0.424633] rcu: Hierarchical SRCU implementation.
[    0.425514] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.425624] smp: Bringing up secondary CPUs ...
[    0.425840] x86: Booting SMP configuration:
[    0.425842] .... node  #0, CPUs:      #1 #2 #3
[    0.446258] smp: Brought up 1 node, 4 CPUs
[    0.446258] smpboot: Max logical packages: 1
[    0.446258] smpboot: Total of 4 processors activated (19200.32 BogoMIPS)
[    0.450971] devtmpfs: initialized
[    0.450971] x86/mm: Memory block size: 128MB
[    0.451626] ACPI: PM: Registering ACPI NVS region [mem 0xdf69e000-0xdf6cffff] (204800 bytes)
[    0.451626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.451626] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.451626] pinctrl core: initialized pinctrl subsystem
[    0.451626] PM: RTC time: 09:43:45, date: 2023-01-16
[    0.451626] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.454414] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.454619] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.454839] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.454860] audit: initializing netlink subsys (disabled)
[    0.454944] audit: type=2000 audit(1673862225.188:1): state=initialized audit_enabled=0 res=1
[    0.454944] thermal_sys: Registered thermal governor 'fair_share'
[    0.454944] thermal_sys: Registered thermal governor 'bang_bang'
[    0.454944] thermal_sys: Registered thermal governor 'step_wise'
[    0.454944] thermal_sys: Registered thermal governor 'user_space'
[    0.454944] thermal_sys: Registered thermal governor 'power_allocator'
[    0.454944] EISA bus registered
[    0.454944] cpuidle: using governor ladder
[    0.454944] cpuidle: using governor menu
[    0.454944] ACPI: bus type PCI registered
[    0.454944] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.454944] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.454944] PCI: not using MMCONFIG
[    0.454944] PCI: Using configuration type 1 for base access
[    0.458301] Kprobes globally optimized
[    0.458308] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.458346] ACPI: Added _OSI(Module Device)
[    0.458350] ACPI: Added _OSI(Processor Device)
[    0.458351] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.458352] ACPI: Added _OSI(Processor Aggregator Device)
[    0.458354] ACPI: Added _OSI(Linux-Dell-Video)
[    0.458356] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.458357] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.466161] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.470538] ACPI: Dynamic OEM Table Load:
[    0.470547] ACPI: SSDT 0xFFFF9E58001F3E00 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20060113)
[    0.471473] ACPI: Dynamic OEM Table Load:
[    0.471479] ACPI: SSDT 0xFFFF9E58001F3600 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
[    0.472361] ACPI: Dynamic OEM Table Load:
[    0.472368] ACPI: SSDT 0xFFFF9E58001F2E00 000143 (v01 AMI    CPU3PM   00000001 INTL 20060113)
[    0.474188] ACPI: Dynamic OEM Table Load:
[    0.474195] ACPI: SSDT 0xFFFF9E58001F3400 000143 (v01 AMI    CPU4PM   00000001 INTL 20060113)
[    0.475161] ACPI: Interpreter enabled
[    0.475190] ACPI: PM: (supports S0 S1 S3 S4 S5)
[    0.475193] ACPI: Using IOAPIC for interrupt routing
[    0.475240] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.476937] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.476958] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.476960] PCI: Using E820 reservations for host bridge windows
[    0.477231] ACPI: Enabled 13 GPEs in block 00 to 1F
[    0.486722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.486732] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.486740] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    0.486752] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.487110] PCI host bridge to bus 0000:00
[    0.487114] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.487117] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.487120] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.487122] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.487124] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.487127] pci_bus 0000:00: root bus resource [mem 0xdf700000-0xffffffff window]
[    0.487187] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.487413] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[    0.487428] pci 0000:00:02.0: reg 0x10: [mem 0xfe980000-0xfe9fffff]
[    0.487438] pci 0000:00:02.0: reg 0x14: [io  0xcc00-0xcc07]
[    0.487444] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[    0.487449] pci 0000:00:02.0: reg 0x1c: [mem 0xfe800000-0xfe8fffff]
[    0.487469] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.487650] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.487668] pci 0000:00:1b.0: reg 0x10: [mem 0xfe978000-0xfe97bfff 64bit]
[    0.487740] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.487954] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.488032] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.488252] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.488330] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.488542] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.488582] pci 0000:00:1d.0: reg 0x20: [io  0xc400-0xc41f]
[    0.488793] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.488832] pci 0000:00:1d.1: reg 0x20: [io  0xc480-0xc49f]
[    0.489040] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.489079] pci 0000:00:1d.2: reg 0x20: [io  0xc800-0xc81f]
[    0.489287] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.489327] pci 0000:00:1d.3: reg 0x20: [io  0xc880-0xc89f]
[    0.489535] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.489553] pci 0000:00:1d.7: reg 0x10: [mem 0xfe977c00-0xfe977fff]
[    0.489627] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.489821] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.490056] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.490133] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.490139] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.490142] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.490367] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.490383] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.490393] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.490401] pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
[    0.490410] pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
[    0.490418] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.490436] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.490438] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.490440] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.490442] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.490634] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.490648] pci 0000:00:1f.2: reg 0x10: [io  0xc080-0xc087]
[    0.490656] pci 0000:00:1f.2: reg 0x14: [io  0xc000-0xc003]
[    0.490664] pci 0000:00:1f.2: reg 0x18: [io  0xbc00-0xbc07]
[    0.490671] pci 0000:00:1f.2: reg 0x1c: [io  0xb880-0xb883]
[    0.490679] pci 0000:00:1f.2: reg 0x20: [io  0xb800-0xb80f]
[    0.490714] pci 0000:00:1f.2: PME# supported from D3hot
[    0.490868] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.490920] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.491117] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.491143] pci 0000:02:00.0: reg 0x10: [io  0xec00-0xec07]
[    0.491156] pci 0000:02:00.0: reg 0x14: [io  0xe880-0xe883]
[    0.491169] pci 0000:02:00.0: reg 0x18: [io  0xe800-0xe807]
[    0.491182] pci 0000:02:00.0: reg 0x1c: [io  0xe480-0xe483]
[    0.491195] pci 0000:02:00.0: reg 0x20: [io  0xe400-0xe41f]
[    0.491208] pci 0000:02:00.0: reg 0x24: [mem 0xfebffc00-0xfebffdff]
[    0.491221] pci 0000:02:00.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.491325] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.491394] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.491399] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.491402] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.491473] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[    0.491495] pci 0000:01:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.491522] pci 0000:01:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.491539] pci 0000:01:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[    0.491551] pci 0000:01:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
[    0.491636] pci 0000:01:00.0: supports D1 D2
[    0.491639] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.491766] pci 0000:00:1c.1: PCI bridge to [bus 01]
[    0.491771] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.491774] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.491780] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.491796] pci_bus 0000:03: extended config space not accessible
[    0.491856] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.491865] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.491868] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.491870] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.491872] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.491875] pci 0000:00:1e.0:   bridge window [mem 0xdf700000-0xffffffff window] (subtractive decode)
[    0.492873] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.492981] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[    0.493087] ACPI: PCI: Interrupt link LNKC configured for IRQ 3
[    0.493193] ACPI: PCI: Interrupt link LNKD configured for IRQ 7
[    0.493298] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.493300] ACPI: PCI: Interrupt link LNKE disabled
[    0.493405] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.493407] ACPI: PCI: Interrupt link LNKF disabled
[    0.493511] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.493513] ACPI: PCI: Interrupt link LNKG disabled
[    0.493618] ACPI: PCI: Interrupt link LNKH configured for IRQ 5
[    0.493815] iommu: Default domain type: Translated 
[    0.493815] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.494199] SCSI subsystem initialized
[    0.494207] libata version 3.00 loaded.
[    0.494224] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.494224] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.494224] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.494224] vgaarb: loaded
[    0.494224] ACPI: bus type USB registered
[    0.494234] usbcore: registered new interface driver usbfs
[    0.494244] usbcore: registered new interface driver hub
[    0.494253] usbcore: registered new device driver usb
[    0.494289] pps_core: LinuxPPS API ver. 1 registered
[    0.494291] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.494295] PTP clock support registered
[    0.494313] EDAC MC: Ver: 3.0.0
[    0.494437] NetLabel: Initializing
[    0.494439] NetLabel:  domain hash size = 128
[    0.494440] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.494464] NetLabel:  unlabeled traffic allowed by default
[    0.494489] PCI: Using ACPI for IRQ routing
[    0.495505] PCI: pci_cache_line_size set to 64 bytes
[    0.495548] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.495551] e820: reserve RAM buffer [mem 0xdf690000-0xdfffffff]
[    0.498248] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.498254] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.498261] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.500349] clocksource: Switched to clocksource tsc-early
[    0.519150] VFS: Disk quotas dquot_6.6.0
[    0.519182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.519396] AppArmor: AppArmor Filesystem Enabled
[    0.519428] pnp: PnP ACPI init
[    0.519568] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.519787] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.520005] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.520008] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.520011] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.520014] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.520017] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.520217] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
[    0.520472] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.520477] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.520953] pnp 00:06: [dma 0 disabled]
[    0.521134] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.521428] pnp 00:08: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff]
[    0.521466] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.521470] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.521473] system 00:08: [mem 0x00100000-0xdf6fffff] could not be reserved
[    0.521725] pnp: PnP ACPI: found 9 devices
[    0.529535] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.529651] NET: Registered PF_INET protocol family
[    0.529936] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.531727] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.531823] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.531988] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.532444] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.532595] TCP: Hash tables configured (established 65536 bind 65536)
[    0.532824] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.532915] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.532977] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.533078] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.533087] NET: Registered PF_XDP protocol family
[    0.533108] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.533133] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.533138] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.533142] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.533147] pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.533151] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.533158] pci 0000:00:1c.1: PCI bridge to [bus 01]
[    0.533160] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.533164] pci 0000:00:1c.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.533168] pci 0000:00:1c.1:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.533174] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.533184] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.533186] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.533188] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.533191] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.533193] pci_bus 0000:00: resource 8 [mem 0xdf700000-0xffffffff window]
[    0.533196] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.533198] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.533200] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[    0.533202] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.533204] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.533207] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.533209] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.533211] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.533213] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.533216] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.533218] pci_bus 0000:03: resource 8 [mem 0xdf700000-0xffffffff window]
[    0.534163] PCI: CLS 32 bytes, default 64
[    0.534177] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.534178] software IO TLB: mapped [mem 0x00000000db690000-0x00000000df690000] (64MB)
[    0.534311] Trying to unpack rootfs image as initramfs...
[    0.534977] Initialise system trusted keyrings
[    0.534998] Key type blacklist registered
[    0.535120] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.537757] zbud: loaded
[    0.538404] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.538796] fuse: init (API version 7.34)
[    0.539192] integrity: Platform Keyring initialized
[    0.550939] Key type asymmetric registered
[    0.550948] Asymmetric key parser 'x509' registered
[    0.551028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.551122] io scheduler mq-deadline registered
[    0.552262] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.552494] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.552538] ACPI: button: Power Button [PWRB]
[    0.552589] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.552644] ACPI: button: Power Button [PWRF]
[    0.553798] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.574302] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.577984] Linux agpgart interface v0.103
[    0.581129] loop: module loaded
[    0.581467] ata_piix 0000:00:1f.1: version 2.13
[    0.583587] scsi host0: ata_piix
[    0.584086] scsi host1: ata_piix
[    0.584149] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.584153] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.584341] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.586176] scsi host2: ata_piix
[    0.586546] scsi host3: ata_piix
[    0.586596] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[    0.586599] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[    0.586893] tun: Universal TUN/TAP device driver, 1.6
[    0.586956] PPP generic driver version 2.4.2
[    0.587077] VFIO - User Level meta-driver version: 0.3
[    0.587232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.587240] ehci-pci: EHCI PCI platform driver
[    0.587421] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.587431] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.587445] ehci-pci 0000:00:1d.7: debug port 1
[    0.591398] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe977c00
[    0.603969] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.604068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.604073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.604076] usb usb1: Product: EHCI Host Controller
[    0.604078] usb usb1: Manufacturer: Linux 5.15.0-57-generic ehci_hcd
[    0.604080] usb usb1: SerialNumber: 0000:00:1d.7
[    0.604250] hub 1-0:1.0: USB hub found
[    0.604262] hub 1-0:1.0: 8 ports detected
[    0.604588] ehci-platform: EHCI generic platform driver
[    0.604617] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.604622] ohci-pci: OHCI PCI platform driver
[    0.604644] ohci-platform: OHCI generic platform driver
[    0.604654] uhci_hcd: USB Universal Host Controller Interface driver
[    0.604830] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.604845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.604853] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.604881] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[    0.604959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    0.604963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.604966] usb usb2: Product: UHCI Host Controller
[    0.604968] usb usb2: Manufacturer: Linux 5.15.0-57-generic uhci_hcd
[    0.604970] usb usb2: SerialNumber: 0000:00:1d.0
[    0.605108] hub 2-0:1.0: USB hub found
[    0.605117] hub 2-0:1.0: 2 ports detected
[    0.605346] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.605353] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.605359] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.605377] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[    0.605434] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    0.605438] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.605440] usb usb3: Product: UHCI Host Controller
[    0.605442] usb usb3: Manufacturer: Linux 5.15.0-57-generic uhci_hcd
[    0.605444] usb usb3: SerialNumber: 0000:00:1d.1
[    0.605574] hub 3-0:1.0: USB hub found
[    0.605583] hub 3-0:1.0: 2 ports detected
[    0.605815] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.605823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.605829] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.605861] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    0.605925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    0.605928] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.605931] usb usb4: Product: UHCI Host Controller
[    0.605933] usb usb4: Manufacturer: Linux 5.15.0-57-generic uhci_hcd
[    0.605935] usb usb4: SerialNumber: 0000:00:1d.2
[    0.606074] hub 4-0:1.0: USB hub found
[    0.606083] hub 4-0:1.0: 2 ports detected
[    0.606303] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.606310] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.606317] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.606342] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[    0.606401] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    0.606404] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.606407] usb usb5: Product: UHCI Host Controller
[    0.606409] usb usb5: Manufacturer: Linux 5.15.0-57-generic uhci_hcd
[    0.606411] usb usb5: SerialNumber: 0000:00:1d.3
[    0.606541] hub 5-0:1.0: USB hub found
[    0.606550] hub 5-0:1.0: 2 ports detected
[    0.606783] i8042: PNP: No PS/2 controller found.
[    0.606785] i8042: Probing ports directly.
[    0.609067] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.609080] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.609313] mousedev: PS/2 mouse device common for all mice
[    0.609537] rtc_cmos 00:01: RTC can wake from S4
[    0.609790] rtc_cmos 00:01: registered as rtc0
[    0.609821] rtc_cmos 00:01: setting system clock to 2023-01-16T09:43:46 UTC (1673862226)
[    0.609847] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.609864] i2c_dev: i2c /dev entries driver
[    0.610120] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.610185] device-mapper: uevent: version 1.0.3
[    0.610282] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.610324] platform eisa.0: Probing EISA bus 0
[    0.610327] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.610330] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.610332] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.610334] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.610336] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.610338] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.610340] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.610342] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.610345] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.610346] platform eisa.0: EISA: Detected 0 cards
[    0.610350] intel_pstate: CPU model not supported
[    0.610596] ledtrig-cpu: registered to indicate activity on CPUs
[    0.610642] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.610645] vesafb: scrolling: redraw
[    0.610646] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.610681] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
[    0.610773] fbcon: Deferring console take-over
[    0.610775] fb0: VESA VGA frame buffer device
[    0.610915] drop_monitor: Initializing network drop monitor service
[    0.611190] NET: Registered PF_INET6 protocol family
[    0.769025] ata3.00: ATA-10: CT240BX500SSD1, M6CR056, max UDMA/133
[    0.769032] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    0.772659] ata3.00: Features: Dev-Sleep
[    0.772766] ata3.01: supports DRM functions and may not be fully accessible
[    0.772768] ata3.01: ATA-11: Samsung SSD 870 QVO 1TB, SVQ02B6Q, max UDMA/133
[    0.772772] ata3.01: 1953525168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    0.775616] ata3.01: Features: Trust Dev-Sleep
[    0.793390] ata3.01: supports DRM functions and may not be fully accessible
[    0.796186] scsi 2:0:0:0: Direct-Access     ATA      CT240BX500SSD1   056  PQ: 0 ANSI: 5
[    0.796427] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    0.796567] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    0.796595] sd 2:0:0:0: [sda] Write Protect is off
[    0.796599] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.796614] scsi 2:0:1:0: Direct-Access     ATA      Samsung SSD 870  2B6Q PQ: 0 ANSI: 5
[    0.796641] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.796911] ata3.01: Enabling discard_zeroes_data
[    0.796974] sd 2:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.796986] sd 2:0:1:0: [sdb] Write Protect is off
[    0.796989] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    0.797013] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.797030] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    0.797420] ata3.01: Enabling discard_zeroes_data
[    0.814678]  sda: sda1 sda2 sda3
[    0.828176]  sdb: sdb1
[    0.828284] ata3.01: Enabling discard_zeroes_data
[    0.837189] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.862869] sd 2:0:1:0: [sdb] supports TCG Opal
[    0.862872] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.079807] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.280570] usb 2-1: New USB device found, idVendor=10c4, idProduct=8108, bcdDevice= 0.00
[    1.280580] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.280583] usb 2-1: Product: USB OPTICAL MOUSE
[    1.280586] usb 2-1: Manufacturer: YSPRINGTECH
[    1.542189] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[    1.542209] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns
[    1.542277] clocksource: Switched to clocksource tsc
[    1.818262] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    1.831292] Freeing initrd memory: 116556K
[    1.841923] Segment Routing with IPv6
[    1.841961] In-situ OAM (IOAM) with IPv6
[    1.842006] NET: Registered PF_PACKET protocol family
[    1.842099] Key type dns_resolver registered
[    1.842667] microcode: sig=0x6fb, pf=0x10, revision=0xba
[    1.842749] microcode: Microcode Update Driver: v2.2.
[    1.842757] IPI shorthand broadcast: enabled
[    1.842777] sched_clock: Marking stable (1842471701, 269034)->(1875321540, -32580805)
[    1.843075] registered taskstats version 1
[    1.843152] Loading compiled-in X.509 certificates
[    1.844420] Loaded X.509 cert 'Build time autogenerated kernel key: aeaa4d5ea3021317c1182f7df69e47fb43c2b9fb'
[    1.845519] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    1.846626] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    1.846628] blacklist: Loading compiled-in revocation X.509 certificates
[    1.846656] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    1.846943] zswap: loaded using pool lzo/zbud
[    1.847299] Key type ._fscrypt registered
[    1.847301] Key type .fscrypt registered
[    1.847303] Key type fscrypt-provisioning registered
[    1.852399] Key type encrypted registered
[    1.852406] AppArmor: AppArmor sha1 policy hashing enabled
[    1.852426] ima: No TPM chip found, activating TPM-bypass!
[    1.852441] Loading compiled-in module X.509 certificates
[    1.853586] Loaded X.509 cert 'Build time autogenerated kernel key: aeaa4d5ea3021317c1182f7df69e47fb43c2b9fb'
[    1.853589] ima: Allocated hash algorithm: sha1
[    1.853598] ima: No architecture policies found
[    1.853617] evm: Initialising EVM extended attributes:
[    1.853618] evm: security.selinux
[    1.853620] evm: security.SMACK64
[    1.853621] evm: security.SMACK64EXEC
[    1.853622] evm: security.SMACK64TRANSMUTE
[    1.853624] evm: security.SMACK64MMAP
[    1.853625] evm: security.apparmor
[    1.853626] evm: security.ima
[    1.853627] evm: security.capability
[    1.853628] evm: HMAC attrs: 0x1
[    1.854089] PM:   Magic number: 7:807:727
[    1.854135] block loop7: hash matches
[    1.855247] RAS: Correctable Errors collector initialized.
[    1.857704] Freeing unused decrypted memory: 2036K
[    1.858986] Freeing unused kernel image (initmem) memory: 3232K
[    1.878191] Write protecting the kernel read-only data: 30720k
[    1.879228] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.879879] Freeing unused kernel image (rodata/data gap) memory: 1476K
[    1.939394] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.939411] x86/mm: Checking user space page tables
[    1.996813] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.996837] Run /init as init process
[    1.996840]   with arguments:
[    1.996843]     /init
[    1.996844]     splash
[    1.996846]   with environment:
[    1.996847]     HOME=/
[    1.996849]     TERM=linux
[    1.996850]     BOOT_IMAGE=/boot/vmlinuz-5.15.0-57-generic
[    2.172967] hid: raw HID events driver (C) Jiri Kosina
[    2.180698] ahci 0000:02:00.0: version 3.0
[    2.181331] ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
[    2.181371] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.181376] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    2.186118] scsi host4: ahci
[    2.188552] r8169 0000:01:00.0 eth0: RTL8102e/RTL8103e, 48:5b:39:d8:02:29, XID 24c, IRQ 17
[    2.189634] scsi host5: ahci
[    2.189755] ata5: SATA max UDMA/133 abar m512@0xfebffc00 port 0xfebffd00 irq 24
[    2.189761] ata6: SATA max UDMA/133 abar m512@0xfebffc00 port 0xfebffd80 irq 24
[    2.195882] usbcore: registered new interface driver usbhid
[    2.195886] usbhid: USB HID core driver
[    2.247249] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    2.255097] gpio_ich gpio_ich.2.auto: GPIO from 974 to 1023
[    2.446161] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    2.532206] usb 3-1: New USB device found, idVendor=04d9, idProduct=1702, bcdDevice= 4.06
[    2.532217] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.532222] usb 3-1: Product: USB Keyboard
[    2.532225] usb 3-1: Manufacturer:  
[    2.666176] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.681162] ata5.00: ATA-8: WDC WD3200AAJS-22B4A0, 01.03A01, max UDMA/133
[    2.681244] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    2.682182] ata5.00: configured for UDMA/133
[    2.682343] scsi 4:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-2 3A01 PQ: 0 ANSI: 5
[    2.682731] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.682746] sd 4:0:0:0: [sdc] Write Protect is off
[    2.682749] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.682773] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.683162] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.683401] input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:10C4:8108.0001/input/input5
[    2.683559] hid-generic 0003:10C4:8108.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
[    2.683884] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:04D9:1702.0002/input/input6
[    2.741288]  sdc: sdc1 sdc2 sdc3 sdc4
[    2.742304] hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-1/input0
[    2.742749] input:   USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:04D9:1702.0003/input/input7
[    2.758293] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.802300] input:   USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:04D9:1702.0003/input/input8
[    2.802414] hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-1/input1
[    2.996382] ata6: SATA link down (SStatus 0 SControl 300)
[    3.000287] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.000539] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    3.002571] i2c i2c-0: Successfully instantiated SPD at 0x50
[    3.109443] pci 0000:00:00.0: Intel G33 Chipset
[    3.109463] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    3.110111] pci 0000:00:00.0: detected 8192K stolen memory
[    3.110364] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.135244] i915 0000:00:02.0: [drm] Initialized overlay support.
[    3.135629] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    3.176502] fbcon: i915drmfb (fb0) is primary device
[    3.176508] fbcon: Deferring console take-over
[    3.176513] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    7.782161] usb 1-5: device descriptor read/64, error -110
[    7.782175] fbcon: Taking over console
[    7.791661] Console: switching to colour frame buffer device 240x67
[    8.047062] usb 1-5: New USB device found, idVendor=abcd, idProduct=1234, bcdDevice= 1.00
[    8.047069] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.047073] usb 1-5: Product: UDisk           
[    8.047077] usb 1-5: Manufacturer: General 
[    8.047079] usb 1-5: SerialNumber: Љ
[    8.341525] usb-storage 1-5:1.0: USB Mass Storage device detected
[    8.341788] scsi host6: usb-storage 1-5:1.0
[    8.341951] usbcore: registered new interface driver usb-storage
[    8.344761] usbcore: registered new interface driver uas
[    8.823951] random: lvm: uninitialized urandom read (4 bytes read)
[    8.955284] random: lvm: uninitialized urandom read (4 bytes read)
[    9.122151] raid6: sse2x4   gen()  7386 MB/s
[    9.190152] raid6: sse2x4   xor()  3515 MB/s
[    9.258150] raid6: sse2x2   gen()  8957 MB/s
[    9.326149] raid6: sse2x2   xor()  5831 MB/s
[    9.350844] scsi 6:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
[    9.351251] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    9.352330] sd 6:0:0:0: [sdd] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[    9.353008] sd 6:0:0:0: [sdd] Write Protect is off
[    9.353015] sd 6:0:0:0: [sdd] Mode Sense: 0b 00 00 08
[    9.353697] sd 6:0:0:0: [sdd] No Caching mode page found
[    9.353706] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    9.394151] raid6: sse2x1   gen()  7458 MB/s
[    9.407963]  sdd: sdd1
[    9.410950] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    9.462151] raid6: sse2x1   xor()  4774 MB/s
[    9.462153] raid6: using algorithm sse2x2 gen() 8957 MB/s
[    9.462155] raid6: .... xor() 5831 MB/s, rmw enabled
[    9.462157] raid6: using ssse3x2 recovery algorithm
[    9.468302] xor: measuring software checksum speed
[    9.469068]    prefetch64-sse  : 12914 MB/sec
[    9.469963]    generic_sse     : 11005 MB/sec
[    9.469965] xor: using function: prefetch64-sse (12914 MB/sec)
[    9.520861] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    9.970165] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   10.264822] systemd[1]: Inserted module 'autofs4'
[   10.301034] systemd[1]: systemd 249.11-0ubuntu3.6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   10.318295] systemd[1]: Detected architecture x86-64.
[   10.603546] random: lvmconfig: uninitialized urandom read (4 bytes read)
[   10.789677] systemd[1]: Queued start job for default target Graphical Interface.
[   10.790069] random: systemd: uninitialized urandom read (16 bytes read)
[   10.791240] systemd[1]: Created slice Slice /system/modprobe.
[   10.791348] random: systemd: uninitialized urandom read (16 bytes read)
[   10.791801] systemd[1]: Created slice Slice /system/systemd-fsck.
[   10.792197] systemd[1]: Created slice User and Session Slice.
[   10.792293] systemd[1]: Started ntp-systemd-netif.path.
[   10.792404] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.792677] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.792833] systemd[1]: Reached target User and Group Name Lookups.
[   10.792870] systemd[1]: Reached target Remote File Systems.
[   10.792903] systemd[1]: Reached target Slice Units.
[   10.792961] systemd[1]: Reached target Local Verity Protected Volumes.
[   10.793107] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.793300] systemd[1]: Listening on LVM2 poll daemon socket.
[   10.793456] systemd[1]: Listening on Syslog Socket.
[   10.795534] systemd[1]: Listening on Process Core Dump Socket.
[   10.795690] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.795785] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.796111] systemd[1]: Listening on Journal Audit Socket.
[   10.796282] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.796488] systemd[1]: Listening on Journal Socket.
[   10.796935] systemd[1]: Listening on udev Control Socket.
[   10.797169] systemd[1]: Listening on udev Kernel Socket.
[   10.798608] systemd[1]: Mounting Huge Pages File System...
[   10.799908] systemd[1]: Mounting POSIX Message Queue File System...
[   10.801457] systemd[1]: Mounting Kernel Debug File System...
[   10.803461] systemd[1]: Mounting Kernel Trace File System...
[   10.807030] systemd[1]: Starting Journal Service...
[   10.807461] systemd[1]: Finished Availability of block devices.
[   10.810127] systemd[1]: Starting Set the console keyboard layout...
[   10.812461] systemd[1]: Starting Create List of Static Device Nodes...
[   10.814632] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   10.817024] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[   10.818968] systemd[1]: Starting Load Kernel Module configfs...
[   10.820647] systemd[1]: Starting Load Kernel Module drm...
[   10.822832] systemd[1]: Starting Load Kernel Module efi_pstore...
[   10.825182] systemd[1]: Starting Load Kernel Module fuse...
[   10.827159] systemd[1]: Starting Load Kernel Module pstore_blk...
[   10.837548] systemd[1]: Starting Load Kernel Module pstore_zone...
[   10.841591] systemd[1]: Starting Load Kernel Module ramoops...
[   10.841860] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   10.850436] systemd[1]: Starting Load Kernel Modules...
[   10.852614] systemd[1]: Starting Remount Root and Kernel File Systems...
[   10.854409] systemd[1]: Starting Coldplug All udev Devices...
[   10.858896] systemd[1]: Mounted Huge Pages File System.
[   10.859178] systemd[1]: Mounted POSIX Message Queue File System.
[   10.859391] systemd[1]: Mounted Kernel Debug File System.
[   10.859616] systemd[1]: Mounted Kernel Trace File System.
[   10.860332] systemd[1]: Finished Create List of Static Device Nodes.
[   10.860927] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   10.861316] systemd[1]: Finished Load Kernel Module configfs.
[   10.861808] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   10.862198] systemd[1]: Finished Load Kernel Module drm.
[   10.863368] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   10.863752] systemd[1]: Finished Load Kernel Module efi_pstore.
[   10.864244] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   10.864607] systemd[1]: Finished Load Kernel Module fuse.
[   10.865076] systemd[1]: modprobe@pstore_blk.service: Deactivated successfully.
[   10.865658] systemd[1]: Finished Load Kernel Module pstore_blk.
[   10.866353] systemd[1]: modprobe@pstore_zone.service: Deactivated successfully.
[   10.868884] systemd[1]: Finished Load Kernel Module pstore_zone.
[   10.869824] systemd[1]: modprobe@chromeos_pstore.service: Deactivated successfully.
[   10.872443] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[   10.873187] systemd[1]: modprobe@ramoops.service: Deactivated successfully.
[   10.873585] systemd[1]: Finished Load Kernel Module ramoops.
[   10.877847] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   10.887928] lp: driver loaded but no devices found
[   10.890496] systemd[1]: Finished Remount Root and Kernel File Systems.
[   10.897231] ppdev: user-space parallel port driver
[   10.906288] systemd[1]: Mounting FUSE Control File System...
[   10.911285] systemd[1]: Mounting Kernel Configuration File System...
[   10.920932] systemd[1]: Starting Create System Users...
[   10.928855] systemd[1]: Mounted FUSE Control File System.
[   10.929181] systemd[1]: Mounted Kernel Configuration File System.
[   10.939792] systemd[1]: Finished Load Kernel Modules.
[   10.941399] systemd[1]: Starting Apply Kernel Variables...
[   10.945443] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   10.947404] systemd[1]: Finished Create System Users.
[   10.949149] systemd[1]: Starting Create Static Device Nodes in /dev...
[   10.949943] systemd[1]: Finished Set the console keyboard layout.
[   10.961828] systemd[1]: Finished Apply Kernel Variables.
[   10.975090] systemd[1]: Finished Create Static Device Nodes in /dev.
[   10.975333] systemd[1]: Reached target Preparation for Local File Systems.
[   10.977621] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[   10.990461] systemd[1]: Started Journal Service.
[   11.374867] intel_rng: FWH not detected
[   11.457834] leds_ss4200: no LED devices found
[   11.461933] at24 0-0050: supply vcc not found, using dummy regulator
[   11.465691] at24 0-0050: 256 byte spd EEPROM, read-only
[   11.623944] random: systemd: uninitialized urandom read (16 bytes read)
[   11.633370] random: systemd-journal: uninitialized urandom read (16 bytes read)
[   11.659517] random: systemd: uninitialized urandom read (16 bytes read)
[   11.801208] coretemp coretemp.0: Using relative temperature scale!
[   11.802962] coretemp coretemp.0: Using relative temperature scale!
[   11.804865] coretemp coretemp.0: Using relative temperature scale!
[   11.804995] coretemp coretemp.0: Using relative temperature scale!
[   11.831728] intel_powerclamp: No package C-state available
[   11.876028] intel_powerclamp: No package C-state available
[   11.934745] intel_powerclamp: No package C-state available
[   11.983365] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   11.983373] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.983376] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.983382] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.983384] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.983387] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   11.983389] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   11.983391] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   12.010775] intel_powerclamp: No package C-state available
[   12.011130] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.011213] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.011573] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.011673] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.011749] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.176688] Adding 19530748k swap on /dev/sdc1.  Priority:-2 extents:1 across:19530748k FS
[   12.217203] random: crng init done
[   12.217208] random: 270 urandom warning(s) missed due to ratelimiting
[   12.312854] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   12.400854] spl: loading out-of-tree module taints kernel.
[   12.409127] znvpair: module license 'CDDL' taints kernel.
[   12.409133] Disabling lock debugging due to kernel taint
[   12.669543] ZFS: Loaded module v2.1.4-0ubuntu0.1, ZFS pool version 5000, ZFS filesystem version 5
[   12.815621] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   12.830531] systemd-journald[364]: Received client request to flush runtime journal.
[   13.144517] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[   13.349872] audit: type=1400 audit(1673862239.232:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=721 comm="apparmor_parser"
[   13.349883] audit: type=1400 audit(1673862239.232:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=721 comm="apparmor_parser"
[   13.349887] audit: type=1400 audit(1673862239.232:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=721 comm="apparmor_parser"
[   13.349891] audit: type=1400 audit(1673862239.232:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=721 comm="apparmor_parser"
[   13.349963] audit: type=1400 audit(1673862239.232:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=718 comm="apparmor_parser"
[   13.349969] audit: type=1400 audit(1673862239.232:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=718 comm="apparmor_parser"
[   13.367792] audit: type=1400 audit(1673862239.252:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/redshift" pid=723 comm="apparmor_parser"
[   13.375599] audit: type=1400 audit(1673862239.260:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=719 comm="apparmor_parser"
[   13.376216] audit: type=1400 audit(1673862239.260:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=720 comm="apparmor_parser"
[   13.376223] audit: type=1400 audit(1673862239.260:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=720 comm="apparmor_parser"
[   18.372106] RTL8201CP Ethernet r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[   18.440204] r8169 0000:01:00.0 enp1s0: Link is Down
[   19.921338] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   19.921365] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   20.205167] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   20.211353] vboxdrv: Found 4 processor cores
[   20.211690] vboxdrv: fAsync=0 offMin=0x3f9 offMax=0x181e
[   20.312584] vboxdrv: TSC mode is Synchronous, tentative frequency 2400007841 Hz
[   20.312591] vboxdrv: Successfully loaded version 6.1.38_Ubuntu r153438 (interface 0x00320000)
[   20.326628] VBoxNetFlt: Successfully started.
[   20.337627] VBoxNetAdp: Successfully started.
[   20.340206] kauditd_printk_skb: 16 callbacks suppressed
[   20.340210] audit: type=1400 audit(1673862246.224:28): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/etc/ssl/openssl.cnf" pid=1158 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   40.219271] audit: type=1400 audit(1673862265.662:29): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1045 comm="cups-browsed" capability=23  capname="sys_nice"

Aussi...
J'ai vue une vidéo qui parlait d'un fichier etc/network/interface mon résultat n'est pas comme les autres...

Code : Tout sélectionner

# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source /etc/network/interfaces.d/*

Donc
Si je reboot le sujet ne sera pas résolut mais je le ferai si besoin
Je reviendrai surement avec le même problème mais mieux expliqué sous un nouveau sujet

Si tu as une idées sur ce qui c'est passé?
Que je fasse gaffe lors de mes commandes (service NetworkManager....)

Pour le moment je me concentre sur mon script, le termine et j'aviserai...

[cyrille]

Code : Tout sélectionner

serveur@serveurproliant-1:~$ cat /etc/network/interfaces

Code : Tout sélectionner

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

Normalement on y met en palce la boucle locale et on charge ce qu'il y a dans intefaces.d
Par défaut vide mais il peut y avoir des entrées spécifiques comme la déclaration d'une interface IPV6