Je viens de faire l'aquisition de ce Pc portable Acer d'occasion. Dans Gnome-Disk il était mentionné (disque sain et 22 secteurs endommagés). J'ai lancé un auto test court et au bout de seulement 10% du test " ECHEC de L'AUTO TEST".
J'ai trouvé la commande du rapport sur le wiki d'ubuntu de smartmontools dont voici le résultat:
Code : Tout sélectionner
bruno@extensa-5635:~$ sudo smartctl -s on -a /dev/sda
[sudo] Mot de passe de bruno :
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-87-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9250315AS
Serial Number: 6VC0AFZ0
LU WWN Device Id: 5 000c50 018c12de4
Firmware Version: 0001SDM1
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Oct 28 14:49:24 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 75) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 093 006 Pre-fail Always - 208003297
3 Spin_Up_Time 0x0003 099 072 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6405
7 Seek_Error_Rate 0x0033 100 100 030 Pre-fail Always - 9
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 244742222
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9000
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 037 020 Old_age Always - 4365
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 335
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 34360262689
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 052 045 Old_age Always - 34 (Min/Max 20/34)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 99
194 Temperature_Celsius 0x0032 100 100 000 Old_age Always - 0 (Min/Max 0/2)
193 Load_Cycle_Count 0x0032 045 045 000 Old_age Always - 110796
194 Temperature_Celsius 0x0022 034 048 000 Old_age Always - 34 (0 10 0 0 0)
195 Hardware_ECC_Recovered 0x001a 045 036 000 Old_age Always - 208003297
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 22
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 22
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 310 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 310 occurred at disk power-on lifetime: 8982 hours (374 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 00 00 9e d4 41 00 01:07:36.984 WRITE FPDMA QUEUED
60 00 40 ff ff ff 4f 00 01:07:36.982 READ FPDMA QUEUED
61 00 00 00 a5 d4 41 00 01:07:36.982 WRITE FPDMA QUEUED
61 00 00 00 a4 d4 41 00 01:07:36.981 WRITE FPDMA QUEUED
61 00 00 00 a3 d4 41 00 01:07:36.981 WRITE FPDMA QUEUED
Error 309 occurred at disk power-on lifetime: 8982 hours (374 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 2a 90 b1 86 43 00 01:07:34.597 WRITE FPDMA QUEUED
61 00 00 90 b0 86 43 00 01:07:34.597 WRITE FPDMA QUEUED
60 00 40 ff ff ff 4f 00 01:07:34.585 READ FPDMA QUEUED
61 00 88 08 b0 86 43 00 01:07:34.585 WRITE FPDMA QUEUED
61 00 00 08 af 86 43 00 01:07:34.585 WRITE FPDMA QUEUED
Error 308 occurred at disk power-on lifetime: 8982 hours (374 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 90 e0 83 41 00 01:07:32.142 WRITE FPDMA QUEUED
61 00 08 50 fb e4 41 00 01:07:32.142 WRITE FPDMA QUEUED
61 00 08 d0 f0 de 41 00 01:07:32.141 WRITE FPDMA QUEUED
61 00 08 c0 f0 de 41 00 01:07:32.141 WRITE FPDMA QUEUED
61 00 08 c8 f0 de 41 00 01:07:32.140 WRITE FPDMA QUEUED
Error 307 occurred at disk power-on lifetime: 8982 hours (374 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 90 e0 83 41 00 01:07:29.710 WRITE FPDMA QUEUED
61 00 08 d0 f0 de 41 00 01:07:29.710 WRITE FPDMA QUEUED
61 00 08 50 fb e4 41 00 01:07:29.710 WRITE FPDMA QUEUED
61 00 18 40 ad e0 41 00 01:07:29.709 WRITE FPDMA QUEUED
60 00 40 ff ff ff 4f 00 01:07:29.707 READ FPDMA QUEUED
Error 306 occurred at disk power-on lifetime: 8982 hours (374 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 90 e0 83 41 00 01:07:27.266 WRITE FPDMA QUEUED
61 00 08 50 fb e4 41 00 01:07:27.265 WRITE FPDMA QUEUED
61 00 08 c8 f0 de 41 00 01:07:27.265 WRITE FPDMA QUEUED
60 00 40 ff ff ff 4f 00 01:07:27.263 READ FPDMA QUEUED
61 00 01 58 40 c7 41 00 01:07:27.263 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 8999 350774226
# 2 Short offline Completed: read failure 80% 8981 272964887
# 3 Short offline Interrupted (host reset) 90% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
jumbo67.
