Crash du Bluetooth

[azix]

Linux Mint 21.3

Bonjour,
J'essaye de lancer le Bluetooth le logiciel s'ouvre et 0.5s après il se referme, j'ai déjà essayé quelque solution proposée sur le forum mais rien ne fonctionne.

Voici différente information utile :

Code : Tout sélectionner

lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 27c6:5125 Shenzhen Goodix Technology Co.,Ltd. Goodix Fingerprint Device 
Bus 003 Device 002: ID 0489:e0e1 Foxconn / Hon Hai 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 13d3:5480 IMC Networks HD Camera
Bus 001 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120
Bus 001 Device 002: ID 17ef:608d Lenovo Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code : Tout sélectionner

rfkill list
0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

Code : Tout sélectionner

hciconfig -a
hci0:	Type: Primary  Bus: USB
	BD Address: 38:D5:7A:DF:F6:C4  ACL MTU: 1024:8  SCO MTU: 240:4
	DOWN 
	RX bytes:539 acl:0 sco:0 events:25 errors:0
	TX bytes:338 acl:0 sco:0 commands:25 errors:0
	Features: 0xff 0xfe 0x8f 0xfe 0xd8 0x3f 0x5b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF 
	Link mode: PERIPHERAL ACCEPT 

Code : Tout sélectionner

inxi -Fxz
System:
  Kernel: 5.15.0-91-generic x86_64 bits: 64 compiler: gcc v: 11.4.0
    Desktop: Cinnamon 6.0.4 Distro: Linux Mint 21.3 Virginia
    base: Ubuntu 22.04 jammy
Machine:
  Type: Laptop System: HONOR product: BMH-WCX9 v: M1050
    serial: <superuser required>
  Mobo: HONOR model: BMH-WCX9-PCB v: M1050 serial: <superuser required>
    UEFI: HONOR v: 1.11 date: 03/31/2022
Battery:
  ID-1: BAT1 charge: 40.3 Wh (77.6%) condition: 51.9/54.9 Wh (94.5%)
    volts: 8.1 min: 7.6 model: Desay HB4792Z9ECW-22T status: Discharging
CPU:
  Info: 6-core model: AMD Ryzen 5 5500U with Radeon Graphics bits: 64
    type: MT MCP arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB
  Speed (MHz): avg: 1397 high: 1399 min/max: 1400/2100 boost: enabled
    cores: 1: 1397 2: 1397 3: 1399 4: 1397 5: 1397 6: 1397 7: 1397 8: 1397
    9: 1397 10: 1397 11: 1397 12: 1397 bogomips: 50303
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Lucienne vendor: QUANTA driver: amdgpu v: kernel
    bus-ID: 03:00.0
  Device-2: IMC Networks HD Camera type: USB driver: uvcvideo bus-ID: 1-4:4
  Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
    unloaded: fbdev,modesetting,vesa gpu: amdgpu resolution: 1920x1080~60Hz
  OpenGL: renderer: RENOIR (renoir LLVM 15.0.7 DRM 3.42 5.15.0-91-generic)
    v: 4.6 Mesa 23.0.4-0ubuntu1~22.04.1 direct render: Yes
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio vendor: QUANTA
    driver: snd_hda_intel v: kernel bus-ID: 03:00.1
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
    vendor: QUANTA driver: N/A bus-ID: 03:00.5
  Device-3: AMD Family 17h HD Audio vendor: QUANTA driver: snd_hda_intel
    v: kernel bus-ID: 03:00.6
  Sound Server-1: ALSA v: k5.15.0-91-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Qualcomm Atheros QCNFA765 vendor: Foxconn driver: ath11k_pci
    v: kernel port: N/A bus-ID: 01:00.0
  IF: wlp1s0 state: up mac: <filter>
Bluetooth:
  Device-1: Foxconn / Hon Hai type: USB driver: btusb v: 0.8 bus-ID: 3-2:2
  Report: hciconfig ID: hci0 rfk-id: 0 state: down
    bt-service: enabled,running rfk-block: hardware: no software: no
    address: <filter>
Drives:
  Local Storage: total: 476.94 GiB used: 18.99 GiB (4.0%)
  ID-1: /dev/nvme0n1 vendor: Western Digital
    model: PC SN530 SDBPNPZ-512G-1036 size: 476.94 GiB temp: 31.9 C
Partition:
  ID-1: / size: 467.89 GiB used: 18.98 GiB (4.1%) fs: ext4
    dev: /dev/nvme0n1p2
  ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat
    dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
  System Temperatures: cpu: 31.0 C mobo: N/A gpu: amdgpu temp: 30.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 324 Uptime: 8m Memory: 7.1 GiB used: 2.79 GiB (39.3%)
  Init: systemd runlevel: 5 Compilers: gcc: 11.4.0 Packages: 2274 Shell: Zsh
  v: 5.8.1 inxi: 3.3.13

[cyrille]

Bonjour

Que retourne

Code : Tout sélectionner

sudo service bluetooth status

et

Code : Tout sélectionner

sudo dmesg | egrep 'fail|err|warn'

Quel environnement ? ---> Signature cf http://forum-francophone-linuxmint.fr/v ... f=2&t=1514

[azix]

Code : Tout sélectionner

sudo service bluetooth status
[sudo] Mot de passe de cobalt :           
● bluetooth.service - Bluetooth service
     Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor pre>
     Active: active (running) since Fri 2024-01-19 16:07:21 CET; 2min 15s ago
       Docs: man:bluetoothd(8)
   Main PID: 842 (bluetoothd)
     Status: "Running"
      Tasks: 1 (limit: 8563)
     Memory: 1.8M
        CPU: 39ms
     CGroup: /system.slice/bluetooth.service
             └─842 /usr/lib/bluetooth/bluetoothd

janv. 19 16:07:21 honor systemd[1]: Starting Bluetooth service...
janv. 19 16:07:21 honor bluetoothd[842]: Bluetooth daemon 5.64
janv. 19 16:07:21 honor bluetoothd[842]: Starting SDP server
janv. 19 16:07:21 honor systemd[1]: Started Bluetooth service.
janv. 19 16:07:21 honor bluetoothd[842]: Bluetooth management interface 1.21 in>
lines 1-17/17 (END)

Code : Tout sélectionner

sudo dmesg | egrep 'fail|err|warn'
[    0.250946] ACPI: EC: interrupt blocked
[    0.251153] ACPI: Using IOAPIC for interrupt routing
[    0.262065] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.262066] ACPI: PCI: Interrupt link LNKA disabled
[    0.262124] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.262125] ACPI: PCI: Interrupt link LNKB disabled
[    0.262168] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.262169] ACPI: PCI: Interrupt link LNKC disabled
[    0.262226] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.262227] ACPI: PCI: Interrupt link LNKD disabled
[    0.262279] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.262280] ACPI: PCI: Interrupt link LNKE disabled
[    0.262320] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.262321] ACPI: PCI: Interrupt link LNKF disabled
[    0.262362] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.262362] ACPI: PCI: Interrupt link LNKG disabled
[    0.262403] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.262404] ACPI: PCI: Interrupt link LNKH disabled
[    0.263259] ACPI: EC: interrupt unblocked
[    0.331295] AMD-Vi: Interrupt remapping enabled
[    1.678499] fbcon: Deferring console take-over
[    2.096319] acpi_cpufreq: overriding BIOS provided _PSD data
[    3.767033] fbcon: Deferring console take-over
[    5.452606] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   11.677473] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   31.087153] ACPI: EC: interrupt blocked
[   31.396920] ACPI: EC: interrupt unblocked

Voila

[cyrille]

Quel logiciel bluetooth utilises tu ? Sous quel environnement ? Cinnamon ? xfce ? mate ?

[azix]

blueman et Cinnamon 6.0.4

[cyrille]

Que retourne

Code : Tout sélectionner

hcitool scan

Code : Tout sélectionner

hcitool dev

[azix]

Code : Tout sélectionner

hcitool scan                                                          
Device is not available: No such device

Code : Tout sélectionner

hcitool dev                                                             
Devices:

[cyrille]

Code : Tout sélectionner

 hciconfig -a hci0

?

[cyrille]

Tenter

Code : Tout sélectionner

hciconfig hci0 down
rmmod btusb
modprobe btusb
hciconfig hci0 up

[azix]

Code : Tout sélectionner

hciconfig -a hci
hci0:	Type: Primary  Bus: USB
	BD Address: 38:D5:7A:DF:F6:C4  ACL MTU: 1024:8  SCO MTU: 240:4
	DOWN 
	RX bytes:1078 acl:0 sco:0 events:50 errors:0
	TX bytes:676 acl:0 sco:0 commands:50 errors:0
	Features: 0xff 0xfe 0x8f 0xfe 0xd8 0x3f 0x5b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF 
	Link mode: PERIPHERAL ACCEPT 

Code : Tout sélectionner

╭─cobalt@honor ~ 
╰─$ sudo hciconfig hci0 down                                                1 ↵
╭─cobalt@honor ~ 
╰─$ sudo rmmod btusb        
╭─cobalt@honor ~ 
╰─$ sudo modprobe btusb     
╭─cobalt@honor ~ 
╰─$ sudo hciconfig hci0 up  
Can't init device hci0: Invalid request code (56)