comment installer ezthumb
comment installer ezthumb
bonjour,
qui aurais la patience de faire une petite vidée de comment installé un tar via le terminal.
ses pour tranmetre a des ami qui comprenne pas .
et ça pourrais aussi servir pour d autre.
merci
qui aurais la patience de faire une petite vidée de comment installé un tar via le terminal.
ses pour tranmetre a des ami qui comprenne pas .
et ça pourrais aussi servir pour d autre.
merci
Modifié en dernier par kouga le dim. 15 juil. 2018 14:25, modifié 6 fois.
Carte mère:
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
- arghlub
- Administrateur du site
- Messages : 10421
- Enregistré le : dim. 21 mai 2017 08:19
- Localisation : Provence
- Contact :
Re: demande tuto instalé un tar
Salut,
«Tar» est un logiciel pour gérer les archives (https://doc.ubuntu-fr.org/tar), pas pour installer.
Il faudrait donc savoir ce que contient cette archive pour pouvoir te répondre : contient-elle un script d'installation, faut-il compiler le logiciel, est-ce des paquets .deb, etc ... ?
Donc, le mieux serait que tu nous donnes le lien d'où provient l'archive qu'ont trouvée tes amis pour voir ce qu'elle contient car les méthodes d'installation peuvent être très différentes.
«Tar» est un logiciel pour gérer les archives (https://doc.ubuntu-fr.org/tar), pas pour installer.
Il faudrait donc savoir ce que contient cette archive pour pouvoir te répondre : contient-elle un script d'installation, faut-il compiler le logiciel, est-ce des paquets .deb, etc ... ?
Donc, le mieux serait que tu nous donnes le lien d'où provient l'archive qu'ont trouvée tes amis pour voir ce qu'elle contient car les méthodes d'installation peuvent être très différentes.
Tour1 (custom) • CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Re: demande tuto instalé un tar
Si tu pouvais faire une petite vidéo ce serait pas mal aussi
Stretch 32bits cinnamon/Fedora25/Sarah
Compaq 8510p/MSI GE70/Raspberry Pi2
Compaq 8510p/MSI GE70/Raspberry Pi2
Re: demande tuto instalé un tar
bj mpedro,
une vidéo suis nul a ce truc.
sinon a ce que j ai comprit de mon ami il s agirais de ce log https://alternativeto.net/software/ezthumb/" onclick="window.open(this.href);return false;
une vidéo suis nul a ce truc.
sinon a ce que j ai comprit de mon ami il s agirais de ce log https://alternativeto.net/software/ezthumb/" onclick="window.open(this.href);return false;
Carte mère:
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
- arghlub
- Administrateur du site
- Messages : 10421
- Enregistré le : dim. 21 mai 2017 08:19
- Localisation : Provence
- Contact :
Re: demande tuto instalé un tar
L'archive de ce logiciel ( https://sourceforge.net/projects/ezthumb/" onclick="window.open(this.href);return false; | https://github.com/xuminic/ezthumb" onclick="window.open(this.href);return false; ) contient les sources du logiciel qu'il faut compiler avec «make» (il y a aussi un script d'installation «install-sh» mais je n'ai pas regardé son fonctionnement).
Pour la compilation, voici la méthode de base : https://doc.ubuntu-fr.org/tutoriel/comp ... ode_source
Mais, dans ces cas là, il est très très conseillé de lire le fichier «Readme.txt» car certaines procédures de compilation peuvent différées.
Pour des vidéos : il suffit que tu recherches sur ta plateforme vidéo préférée des termes du style : «linux compiler un logiciel» et tu devrais trouver des vidéos expliquant la procédure.
Pour la compilation, voici la méthode de base : https://doc.ubuntu-fr.org/tutoriel/comp ... ode_source
Mais, dans ces cas là, il est très très conseillé de lire le fichier «Readme.txt» car certaines procédures de compilation peuvent différées.
Pour des vidéos : il suffit que tu recherches sur ta plateforme vidéo préférée des termes du style : «linux compiler un logiciel» et tu devrais trouver des vidéos expliquant la procédure.
Tour1 (custom) • CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Re: demande tuto instalé un tar
merci je transmet les info.
Carte mère:
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
- arghlub
- Administrateur du site
- Messages : 10421
- Enregistré le : dim. 21 mai 2017 08:19
- Localisation : Provence
- Contact :
Re: demande tuto instalé un tar
J'ai vu que tu avais mis le petit icône dans ton 1er message, pourrais-tu ajouter [résolu] dans ton titre.
Si le sujet est résolu, merci d'éditer le premier message du sujet, puis :
Si le sujet est résolu, merci d'éditer le premier message du sujet, puis :
- mettre un petit , comme suit : voir tuto ici <----- ça c'est fait
- mettre un [résolu] (entre crochets et à gauche) dans le titre de ce premier message
Tour1 (custom) • CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 11 | MXlinux 21 | LMint 19.3 | XFCE
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Tour2 (custom) • CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 XFCE
Portable1 • MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 20.2 | MXlinux 21 | XFCE
Portable2 • MacBook Air A1466 (2015) | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MXlinux 21 XFCE
─────( pour une informatique libre ! -membre en stand-by de l' April.org────────────────
Re: demande tuto instalé un tar
je revient vers vous pour l installation du logiciel ça a l air tordu,perso j y arrive pas.
le souci es quand j arive a cette commande.
je vais chercher les librairie manquante ici https://community.linuxmint.com/softwar ... ibjpeg-dev" onclick="window.open(this.href);return false;
je retente et
j ai trouvé un install sh voila son contenu que je conprend pas
et pour moi ses du chinois,si vous avez une idée de comment installé le log grand merci.
le souci es quand j arive a cette commande.
Code : Tout sélectionner
~/Bureau $ cd ezthumb-3.6.7
~/Bureau/ezthumb-3.6.7 $ ./configure
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking whether make sets $(MAKE)... (cached) yes
checking for pkg-config... pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GTK... no
checking for GTK... no
checking for smm_init in -lcsoup... no
configure: The libcsoup will be built soon.
checking for exp in -lm... yes
checking for zlibVersion in -lz... no
configure: error: zlib not found.
je retente et
Code : Tout sélectionner
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking whether make sets $(MAKE)... (cached) yes
checking for pkg-config... pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GTK... no
checking for GTK... no
checking for smm_init in -lcsoup... no
configure: The libcsoup will be built soon.
checking for exp in -lm... yes
checking for zlibVersion in -lz... yes
checking for jpeg_read_header in -ljpeg... yes
checking for png_get_copyright in -lpng... no
configure: error: libpng not found.
Code : Tout sélectionner
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2011-11-20.07; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
nl='
'
IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
shift;;
-T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
# Protect names problematic for 'test' and other utilities.
case $dst_arg in
-* | [=\(\)!]) dst_arg=./$dst_arg;;
esac
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
case $src in
-* | [=\(\)!]) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
[-=\(\)!]*) prefix='./';;
*) prefix='';;
esac
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set fnord $dstdir
shift
$posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
test X"$d" = X && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
Carte mère:
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Re: comment installer ezthumb
bon j ai avancé
il faut ajoute ça
install libavformat-dev libavcodec-dev libswscale-dev libavutil-dev libgd-dev libfreetype6-dev libpng-dev libjpeg-dev zlib1g-dev
mais a toujour une erreur
akefile:392 : la recette pour la cible « all » a échouée
make: *** [all] Erreur 2
fatal error: ft2build.h: Aucun fichier ou dossier de ce type
compilation terminated.
la je seche
il faut ajoute ça
install libavformat-dev libavcodec-dev libswscale-dev libavutil-dev libgd-dev libfreetype6-dev libpng-dev libjpeg-dev zlib1g-dev
mais a toujour une erreur
Code : Tout sélectionner
make -C cli all
make[2] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/cli »
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_command.o csc_cli_command.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_getopt.o csc_cli_getopt.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_make_list.o csc_cli_make_list.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_make_table.o csc_cli_make_table.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_mkargs.o csc_cli_mkargs.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_print.o csc_cli_print.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_private.o csc_cli_private.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cli_qopt.o csc_cli_qopt.c
make[2] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/cli »
make -C slog all
make[2] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/slog »
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o slog_core.o slog_core.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o slog_csoup.o slog_csoup.c
make[2] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/slog »
make -C smm all
make[2] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/smm »
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_alloc.o smm_alloc.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_chdir.o smm_chdir.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_codepage.o smm_codepage.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_config.o smm_config.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_cwd_alloc.o smm_cwd_alloc.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_cwd_pop.o smm_cwd_pop.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_cwd_push.o smm_cwd_push.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_filesize.o smm_filesize.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_fontpath.o smm_fontpath.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_fopen.o smm_fopen.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_fstat.o smm_fstat.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_init.o smm_init.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_lstat.o smm_lstat.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_mkdir.o smm_mkdir.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_wcstombs.o smm_wcstombs.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_pathtrek.o smm_pathtrek.c
smm_pathtrek.c: In function ‘path_leave’:
smm_pathtrek.c:446:2: warning: ignoring return value of ‘chdir’, declared with attribute warn_unused_result [-Wunused-result]
chdir("..");
^
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_pwuid.o smm_pwuid.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_rename.o smm_rename.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_signal_break.o smm_signal_break.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_sleep.o smm_sleep.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_time_diff.o smm_time_diff.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_time_get_epoch.o smm_time_get_epoch.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_userpath.o smm_userpath.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o smm_mbstowcs.o smm_mbstowcs.c
make[2] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/smm »
make -C soup all
make[2] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/soup »
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cdll.o csc_cdll.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cmp_file_extargs.o csc_cmp_file_extargs.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cmp_file_extlist.o csc_cmp_file_extlist.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cmp_file_extname.o csc_cmp_file_extname.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_config.o csc_config.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_crc16.o csc_crc16.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_crc16c.o csc_crc16c.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_crc32.o csc_crc32.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_crc8.o csc_crc8.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_cuttoken.o csc_cuttoken.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_extname_filter.o csc_extname_filter.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_file_load.o csc_file_load.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_file_store.o csc_file_store.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_path_basename.o csc_path_basename.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_path_path.o csc_path_path.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_fixtoken.o csc_fixtoken.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_gettoken.o csc_gettoken.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_isdelim.o csc_isdelim.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_iso639.o csc_iso639.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_memdump.o csc_memdump.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strbival.o csc_strbival.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strbody.o csc_strbody.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strcmp_list.o csc_strcmp_list.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strcmp_param.o csc_strcmp_param.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strcount_char.o csc_strcount_char.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strcount_str.o csc_strcount_str.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strcpy_alloc.o csc_strcpy_alloc.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strfill.o csc_strfill.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strinsert.o csc_strinsert.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strlcat.o csc_strlcat.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_strlcpy.o csc_strlcpy.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_url_decode.o csc_url_decode.c
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -c -o csc_ziptoken.o csc_ziptoken.c
make[2] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/soup »
rm -f libcsoup.a
ar crus libcsoup.a cli/*.o slog/*.o smm/*.o soup/*.o
ar: le modificateur « u » est ignoré puisque « D » est le défaut (consultez « U »)
make -C main all
make[2] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/main »
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -I. -L.. -o mkclicmd mkclicmd.c -lcsoup
grep "extern.*struct.*clicmd" main.c fixtoken.c memdump.c slog.c crc.c fontpath.c config.c csc_cdll.c csc_cli.c smm.c strings.c | cut -d: -f2 |tr -d '\r' > main_define.h
./mkclicmd main_define.h
gcc -Wall -Wextra -O3 -g -DDEBUG -DCFG_CDLL_SAFE -DUNICODE -D_UNICODE -D_FILE_OFFSET_BITS=64 -I.. -I. -L.. -o csoup main.c fixtoken.c memdump.c slog.c crc.c fontpath.c config.c csc_cdll.c csc_cli.c smm.c strings.c -lcsoup
make[2] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup/main »
make[1] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7/external/libcsoup »
make all-recursive
make[1] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7 »
Making all in .
make[2] : on entre dans le répertoire « /home/asocial/Bureau/ezthumb-3.6.7 »
gcc -DHAVE_CONFIG_H -DCFG_GUI_OFF -I. -I./external/libcsoup -I./external/iup/include -I/usr/include/ffmpeg -Wall -Wextra -O4 -c main.c
main.c: In function ‘main’:
main.c:365:3: warning: format not a string literal and no format arguments [-Wformat-security]
printf(version);
^
gcc -DHAVE_CONFIG_H -DCFG_GUI_OFF -I. -I./external/libcsoup -I./external/iup/include -I/usr/include/ffmpeg -Wall -Wextra -O4 -c ezthumb.c
gcc -DHAVE_CONFIG_H -DCFG_GUI_OFF -I. -I./external/libcsoup -I./external/iup/include -I/usr/include/ffmpeg -Wall -Wextra -O4 -c id_lookup.c
gcc -DHAVE_CONFIG_H -DCFG_GUI_OFF -I. -I./external/libcsoup -I./external/iup/include -I/usr/include/ffmpeg -Wall -Wextra -O4 -c ezutil.c
gcc -DHAVE_CONFIG_H -DCFG_GUI_OFF -I. -I./external/libcsoup -I./external/iup/include -I/usr/include/ffmpeg -Wall -Wextra -O4 -c ezttf.c
ezttf.c:68:22: fatal error: ft2build.h: Aucun fichier ou dossier de ce type
compilation terminated.
Makefile:452 : la recette pour la cible « ezttf.o » a échouée
make[2]: *** [ezttf.o] Erreur 1
make[2] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7 »
Makefile:464 : la recette pour la cible « all-recursive » a échouée
make[1]: *** [all-recursive] Erreur 1
make[1] : on quitte le répertoire « /home/asocial/Bureau/ezthumb-3.6.7 »
Makefile:392 : la recette pour la cible « all » a échouée
make: *** [all] Erreur 2
make: *** [all] Erreur 2
fatal error: ft2build.h: Aucun fichier ou dossier de ce type
compilation terminated.
la je seche
Carte mère:
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Re: comment installer ezthumb
j ai fini par trouvé
en fait il falis simplement faire
./configure CPPFLAGS="-I/usr/include/freetype2" avant le make et le make install
donc le logiciel es installé.
j ai un dernier souci le logiciel ne ce lance pas.
ce que je recherche ses un logiciel similaire a ça
celui ci es pour windows
en plus ici https://alternativeto.net/software/ezthumb/" onclick="window.open(this.href);return false; ca a l air d avoir une interface graphique
et chez moi elle ce lance pas une idée?
en fait il falis simplement faire
./configure CPPFLAGS="-I/usr/include/freetype2" avant le make et le make install
donc le logiciel es installé.
j ai un dernier souci le logiciel ne ce lance pas.
ce que je recherche ses un logiciel similaire a ça
celui ci es pour windows
en plus ici https://alternativeto.net/software/ezthumb/" onclick="window.open(this.href);return false; ca a l air d avoir une interface graphique
et chez moi elle ce lance pas une idée?
Carte mère:
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis
Type de processeur QuadCore AMD Phenom X4 9500, 2034 MHz (11 x 185)
Nom de la carte mère ASRock N68C-S
Chipset de la carte mère nVIDIA nForce 7025-630a, AMD K10
Mémoire système 4096 Mo (DDR2-800 DDR2 SDRAM)
Carte vidéo AMD Radeon HD 5450 (1024 Mo)
linux mint xfce (64-bit)
2 eme pc
carte mere asus dual coeur 64 bis
4 go de ram en ddr3
carte graphique nvidea 9500 gt
os linux mint cinnamon 64 bis