Quelqu'un peut il me guider ?
Merci d'avance
Nico
Code : Tout sélectionner
atelier-HP-Compaq-dx2300-Microtower ~ # smartctl --all /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, http://www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3250820AS
Serial Number: 6QF38EAH
Firmware Version: 3.CHL
User Capacity: 250 059 350 016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Oct 2 18:11:53 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 39) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 433) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 72) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0002 095 095 000 Old_age Always - 0
4 Start_Stop_Count 0x0033 099 099 020 Pre-fail Always - 1101
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 714816028
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23530
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0033 099 099 020 Pre-fail Always - 1089
184 End-to-End_Error 0x0033 100 253 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x003a 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x0022 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x001a 066 054 000 Old_age Always - 34 (Min/Max 23/38)
194 Temperature_Celsius 0x0000 034 046 000 Old_age Offline - 34 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x0032 062 055 000 Old_age Always - 204662296
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Interrupted (host reset) 70% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
atelier-HP-Compaq-dx2300-Microtower ~ #