Sortie de veille difficile

Assistance concernant Linux Mint
Laurent0718
Messages : 147
Enregistré le : mar. 10 juil. 2018 17:36

Sortie de veille difficile

Message par Laurent0718 »

Bonjour,
Après installation de LM20 il y a quelques semaines, cela fait plusieurs fois que certaines de mes sorties de veille (notamment après une nuit), où j'ai du mal à récupérer la main sur mon PC.
En effet, la saisie du mot de passe de session ne pose pas de problème. Ensuite, lorsque le bureau apparait, j'ai la maitrise totale de la souris, en revanche le PC ne réagit pas lorsque je clique, idem pas de réaction pour les appuis sur le clavier.
Puis petit à petit il y a des réactions avec une grande latence.
Enfin je retrouve la maitrise / réactivité totale du PC après environ 5mn.

Avez-vous une idée du problème ?
(Je précise que j'ai installés les pilotes nvidia)
Cordialement
Linux Mint 19.3 Cinnamon - Sony vaio fz - nvidia 8600m gs - 4Go de ram - intel core T9500

Avatar du membre
cyrille
Administrateur du site
Messages : 12285
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Sortie de veille difficile

Message par cyrille »

Faudrait analyser les sorties de

Code : Tout sélectionner

sudo dmesg
quand ça rame.

Ou si tu as 2 PC, faire une connexion ssh et te connecter au poste qui pose soucis pour analyser des sorties.
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Laurent0718
Messages : 147
Enregistré le : mar. 10 juil. 2018 17:36

Re: Sortie de veille difficile

Message par Laurent0718 »

Bonjour Cyrille,
Dès que cela me le refait, je lance la commande dmesg et je pose le contenu.
Cela a-t-il du sens de le lancer dès que j'ai retrouvé les commandes ? car pendant que ça rame, ça va être compliqué !
Je n'ai pas de deuxième PC pour analyser.
Linux Mint 19.3 Cinnamon - Sony vaio fz - nvidia 8600m gs - 4Go de ram - intel core T9500

Avatar du membre
cyrille
Administrateur du site
Messages : 12285
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Sortie de veille difficile

Message par cyrille »

Mieux vaudrait pendant que ça rame...

Code : Tout sélectionner

sudo dmesg > log.txt
Tu auras la sortie dans un fichier à la base de ton répertoire courant et nommé log.txt

ça évitera au moins de jouer avec le copier / coller de la souris en plein moulinage.
Tu laisses un terminal ouvert en permanence avec la commande prête à l'emploi.

Ou essaie quand ça rame de passer sous un tty (ctrl + Alt + F1) où tu auras peut être plus de "dynamisme"
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Laurent0718
Messages : 147
Enregistré le : mar. 10 juil. 2018 17:36

Re: Sortie de veille difficile

Message par Laurent0718 »

Ok,
Le problème quand ça rame, seule la souris répond.
On verra. Dès que ça arrive, je poste. Merci
Linux Mint 19.3 Cinnamon - Sony vaio fz - nvidia 8600m gs - 4Go de ram - intel core T9500

Avatar du membre
cyrille
Administrateur du site
Messages : 12285
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Sortie de veille difficile

Message par cyrille »

Tu fais un script et tu double clic sur son icone ;)
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Laurent0718
Messages : 147
Enregistré le : mar. 10 juil. 2018 17:36

Re: Sortie de veille difficile

Message par Laurent0718 »

Bonjour,
Le problème est survenu hier, mais ça n'était pas en sortie de veille.
Voici ci-dessous le fichier dmseg.txt

Code : Tout sélectionner

[    0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Linux version 5.4.0-42-generic (buildd@lgw01-amd64-038) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 (Ubuntu 5.4.0-42.46-generic 5.4.44)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-42-generic root=/dev/mapper/xxxx-root ro quiet splash zswap.enabled=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfedffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Sony Corporation VGN-FZ31Z/VAIO, BIOS R2110J7 12/21/2007
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.436 MHz processor
[    0.006850] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.006852] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.006858] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.006863] MTRR default type: uncachable
[    0.006864] MTRR fixed ranges enabled:
[    0.006866]   00000-9FFFF write-back
[    0.006867]   A0000-BFFFF uncachable
[    0.006868]   C0000-FFFFF write-protect
[    0.006868] MTRR variable ranges enabled:
[    0.006870]   0 base 0C0000000 mask FC0000000 uncachable
[    0.006871]   1 base 000000000 mask F00000000 write-back
[    0.006872]   2 base 100000000 mask FC0000000 write-back
[    0.006873]   3 base 0BFF00000 mask FFFF00000 uncachable
[    0.006874]   4 disabled
[    0.006874]   5 disabled
[    0.006875]   6 disabled
[    0.006875]   7 disabled
[    0.008304] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008414] total RAM covered: 4095M
[    0.008737] Found optimal setting for mtrr clean up
[    0.008738]  gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
[    0.010091] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.010096] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[    0.017578] found SMP MP-table at [mem 0x000f8080-0x000f808f]
[    0.023628] check: Scanning 1 areas for low memory corruption
[    0.023635] BRK [0x7fc01000, 0x7fc01fff] PGTABLE
[    0.023638] BRK [0x7fc02000, 0x7fc02fff] PGTABLE
[    0.023639] BRK [0x7fc03000, 0x7fc03fff] PGTABLE
[    0.023681] BRK [0x7fc04000, 0x7fc04fff] PGTABLE
[    0.023682] BRK [0x7fc05000, 0x7fc05fff] PGTABLE
[    0.023922] RAMDISK: [mem 0x2dd59000-0x32ea3fff]
[    0.023934] ACPI: Early table checksum verification disabled
[    0.023939] ACPI: RSDP 0x00000000000F8050 000024 (v02 PTLTD )
[    0.023943] ACPI: XSDT 0x00000000BFED7EF7 000084 (v01 Sony   VAIO     20071221 PTL  00000000)
[    0.023949] ACPI: FACP 0x00000000BFEDFC04 0000F4 (v03 Sony   VAIO     20071221 PTL  00000001)
[    0.023955] ACPI: DSDT 0x00000000BFED9217 006979 (v02 Sony   VAIO     20071221 PTL  20050624)
[    0.023959] ACPI: FACS 0x00000000BFEE2FC0 000040
[    0.023961] ACPI: FACS 0x00000000BFEE2FC0 000040
[    0.023964] ACPI: APIC 0x00000000BFEDFCF8 000068 (v01 Sony   VAIO     20071221 PTL  0000005A)
[    0.023967] ACPI: HPET 0x00000000BFEDFD60 000038 (v01 Sony   VAIO     20071221 PTL  0000005A)
[    0.023971] ACPI: MCFG 0x00000000BFEDFD98 00003C (v01 Sony   VAIO     20071221 PTL  0000005A)
[    0.023974] ACPI: SLIC 0x00000000BFEDFDD4 000176 (v01 Sony   VAIO     20071221 PTL  01000000)
[    0.023977] ACPI: TMOR 0x00000000BFEDFF4A 000026 (v01 Sony   VAIO     20071221 PTL  00000003)
[    0.023981] ACPI: APIC 0x00000000BFEDFF70 000068 (v01 Sony   VAIO     20071221 PTL  00000000)
[    0.023984] ACPI: BOOT 0x00000000BFEDFFD8 000028 (v01 Sony   VAIO     20071221 PTL  00000001)
[    0.023987] ACPI: SSDT 0x00000000BFED90FA 00011D (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.023991] ACPI: SSDT 0x00000000BFED8563 000287 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.023994] ACPI: SSDT 0x00000000BFED84AF 0000B4 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.023998] ACPI: SSDT 0x00000000BFED7F7B 000534 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.024001] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.024002] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.024011] ACPI: Local APIC address 0xfee00000
[    0.024114] No NUMA configuration found
[    0.024115] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.024126] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[    0.024411] Zone ranges:
[    0.024412]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024413]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024414]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.024415]   Device   empty
[    0.024416] Movable zone start for each node
[    0.024419] Early memory node ranges
[    0.024420]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.024422]   node   0: [mem 0x0000000000100000-0x00000000bfecffff]
[    0.024423]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.024434] Zeroed struct page in unavailable ranges: 402 pages
[    0.024435] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.024436] On node 0 totalpages: 1048174
[    0.024437]   DMA zone: 64 pages used for memmap
[    0.024438]   DMA zone: 21 pages reserved
[    0.024439]   DMA zone: 3998 pages, LIFO batch:0
[    0.024511]   DMA32 zone: 12220 pages used for memmap
[    0.024512]   DMA32 zone: 782032 pages, LIFO batch:63
[    0.050770]   Normal zone: 4096 pages used for memmap
[    0.050772]   Normal zone: 262144 pages, LIFO batch:63
[    0.059959] ACPI: PM-Timer IO Port: 0x1008
[    0.059961] ACPI: Local APIC address 0xfee00000
[    0.059974] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.059975] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.059992] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.059995] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.059997] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.059998] ACPI: IRQ0 used by override.
[    0.059999] ACPI: IRQ9 used by override.
[    0.060002] Using ACPI (MADT) for SMP configuration information
[    0.060003] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.060013] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.060036] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.060038] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.060039] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[    0.060039] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[    0.060040] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[    0.060040] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.060042] PM: Registered nosave memory: [mem 0xbfed0000-0xbfedffff]
[    0.060043] PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
[    0.060043] PM: Registered nosave memory: [mem 0xbfee3000-0xbfffffff]
[    0.060044] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.060045] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.060045] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.060046] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.060047] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.060047] PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
[    0.060048] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
[    0.060049] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.060049] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.060050] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.060050] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.060051] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.060052] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.060054] [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.060056] Booting paravirtualized kernel on bare hardware
[    0.060061] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.060069] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.061259] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
[    0.061266] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
[    0.061267] pcpu-alloc: [0] 0 1 
[    0.061306] Built 1 zonelists, mobility grouping on.  Total pages: 1031773
[    0.061307] Policy zone: Normal
[    0.061310] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-42-generic root=/dev/mapper/xxx-root ro quiet splash zswap.enabled=1
[    0.063412] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.064369] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.064419] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.095829] Calgary: detecting Calgary via BIOS EBDA area
[    0.095831] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.136059] Memory: 3938280K/4192696K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 254416K reserved, 0K cma-reserved)
[    0.136073] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.136285] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.136309] Kernel/User page tables isolation: enabled
[    0.136337] ftrace: allocating 44488 entries in 174 pages
[    0.156544] rcu: Hierarchical RCU implementation.
[    0.156546] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.156547] 	Tasks RCU enabled.
[    0.156548] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.156549] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.159934] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.160192] Console: colour dummy device 80x25
[    0.160198] printk: console [tty0] enabled
[    0.160221] ACPI: Core revision 20190816
[    0.160309] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.160324] APIC: Switch to symmetric I/O mode setup
[    0.160760] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.180324] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2562039b669, max_idle_ns: 440795308344 ns
[    0.180329] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.87 BogoMIPS (lpj=10373744)
[    0.180331] pid_max: default: 32768 minimum: 301
[    0.180366] LSM: Security Framework initializing
[    0.180380] Yama: becoming mindful.
[    0.180412] AppArmor: AppArmor initialized
[    0.180467] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.180491] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.180512] *** VALIDATE tmpfs ***
[    0.180694] *** VALIDATE proc ***
[    0.180759] *** VALIDATE cgroup1 ***
[    0.180761] *** VALIDATE cgroup2 ***
[    0.180816] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.180819] process: using mwait in idle threads
[    0.180822] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.180823] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.180826] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.180827] Spectre V2 : Mitigation: Full generic retpoline
[    0.180828] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.180829] Speculative Store Bypass: Vulnerable
[    0.180832] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.180980] Freeing SMP alternatives memory: 40K
[    0.296483] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T9500  @ 2.60GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.296639] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.296646] ... version:                2
[    0.296647] ... bit width:              40
[    0.296648] ... generic registers:      2
[    0.296649] ... value mask:             000000ffffffffff
[    0.296650] ... max period:             000000007fffffff
[    0.296650] ... fixed-purpose events:   3
[    0.296651] ... event mask:             0000000700000003
[    0.296700] rcu: Hierarchical SRCU implementation.
[    0.297634] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.297680] smp: Bringing up secondary CPUs ...
[    0.297853] x86: Booting SMP configuration:
[    0.297854] .... node  #0, CPUs:      #1
[    0.302379] smp: Brought up 1 node, 2 CPUs
[    0.302379] smpboot: Max logical packages: 1
[    0.302379] smpboot: Total of 2 processors activated (10373.74 BogoMIPS)
[    0.304762] devtmpfs: initialized
[    0.304762] x86/mm: Memory block size: 128MB
[    0.304762] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.304762] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.304762] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.304762] pinctrl core: initialized pinctrl subsystem
[    0.304762] PM: RTC time: 19:27:08, date: 2020-08-22
[    0.304762] NET: Registered protocol family 16
[    0.304785] audit: initializing netlink subsys (disabled)
[    0.304795] audit: type=2000 audit(1598124427.144:1): state=initialized audit_enabled=0 res=1
[    0.304795] EISA bus registered
[    0.304795] cpuidle: using governor ladder
[    0.304795] cpuidle: using governor menu
[    0.304795] Simple Boot Flag at 0x36 set to 0x1
[    0.304795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.304795] ACPI: bus type PCI registered
[    0.304795] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.304795] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.304795] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.308346] PCI: Using configuration type 1 for base access
[    0.310635] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.312435] ACPI: Added _OSI(Module Device)
[    0.312436] ACPI: Added _OSI(Processor Device)
[    0.312437] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.312437] ACPI: Added _OSI(Processor Aggregator Device)
[    0.312439] ACPI: Added _OSI(Linux-Dell-Video)
[    0.312440] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.312441] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.319114] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.319114] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.319423] ACPI: Dynamic OEM Table Load:
[    0.319429] ACPI: SSDT 0xFFFF8ADBBB353C00 0002E3 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.320140] ACPI: Dynamic OEM Table Load:
[    0.320145] ACPI: SSDT 0xFFFF8ADBBB286000 0004B7 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.321152] ACPI: Dynamic OEM Table Load:
[    0.321157] ACPI: SSDT 0xFFFF8ADBBB2BEF00 0000E4 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.321665] ACPI: Dynamic OEM Table Load:
[    0.321669] ACPI: SSDT 0xFFFF8ADBBB2CB600 000092 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.322407] ACPI: EC: EC started
[    0.322408] ACPI: EC: interrupt blocked
[    0.544395] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.544397] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.544399] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.544399] ACPI: Interpreter enabled
[    0.544423] ACPI: (supports S0 S3 S4 S5)
[    0.544424] ACPI: Using IOAPIC for interrupt routing
[    0.544455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.544695] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.566207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.566215] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.566605] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.566607] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.566609] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.566610] acpi PNP0A08:00: _OSC: platform willing to grant []
[    0.566612] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.568634] PCI host bridge to bus 0000:00
[    0.568637] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.568638] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.568640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.568641] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.568643] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.568644] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.568646] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.568647] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.568649] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.568660] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.569391] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.569443] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.570193] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.570285] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
[    0.571046] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.571133] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
[    0.571893] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.571930] pci 0000:00:1a.7: reg 0x10: [mem 0xfc304800-0xfc304bff]
[    0.572073] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.572814] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.572851] pci 0000:00:1b.0: reg 0x10: [mem 0xfc300000-0xfc303fff 64bit]
[    0.572966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.573706] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.573849] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.574596] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.574739] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.575473] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[    0.575612] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.576359] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.576498] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.577239] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.577335] pci 0000:00:1d.0: reg 0x20: [io  0x1840-0x185f]
[    0.578092] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.578186] pci 0000:00:1d.1: reg 0x20: [io  0x1860-0x187f]
[    0.578929] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.579007] pci 0000:00:1d.2: reg 0x20: [io  0x1880-0x189f]
[    0.579772] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.579809] pci 0000:00:1d.7: reg 0x10: [mem 0xfc304c00-0xfc304fff]
[    0.579938] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.580671] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.581472] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.581644] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.581653] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.582424] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.582455] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.582475] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.582494] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.582512] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.582525] pci 0000:00:1f.1: reg 0x20: [io  0x18a0-0x18af]
[    0.582553] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.582555] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.582556] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.582557] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.583283] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.583313] pci 0000:00:1f.2: reg 0x10: [io  0x18d8-0x18df]
[    0.583325] pci 0000:00:1f.2: reg 0x14: [io  0x18cc-0x18cf]
[    0.583338] pci 0000:00:1f.2: reg 0x18: [io  0x18d0-0x18d7]
[    0.583350] pci 0000:00:1f.2: reg 0x1c: [io  0x18c8-0x18cb]
[    0.583362] pci 0000:00:1f.2: reg 0x20: [io  0x18e0-0x18ff]
[    0.583375] pci 0000:00:1f.2: reg 0x24: [mem 0xfc304000-0xfc3047ff]
[    0.583438] pci 0000:00:1f.2: PME# supported from D3hot
[    0.584167] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.584192] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.584232] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
[    0.585110] pci 0000:01:00.0: [10de:0425] type 00 class 0x030000
[    0.585134] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[    0.585148] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.585161] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.585170] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
[    0.585180] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.585189] pci 0000:01:00.0: enabling Extended Tags
[    0.585391] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.585394] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.585396] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.585399] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.585477] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.585483] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.585489] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.585498] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.585589] acpiphp: Slot [1] registered
[    0.585599] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.585605] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.585611] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.585620] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.585775] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000
[    0.585864] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa001fff 64bit]
[    0.586116] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.586368] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[    0.586374] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.586380] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.586389] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.586472] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    0.586520] pci_bus 0000:09: extended config space not accessible
[    0.586585] pci 0000:09:03.0: [104c:8039] type 02 class 0x060700
[    0.586617] pci 0000:09:03.0: reg 0x10: [mem 0xfc004000-0xfc004fff]
[    0.586681] pci 0000:09:03.0: supports D1 D2
[    0.586683] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.586787] pci 0000:09:03.1: [104c:803a] type 00 class 0x0c0010
[    0.586816] pci 0000:09:03.1: reg 0x10: [mem 0xfc006000-0xfc0067ff]
[    0.586831] pci 0000:09:03.1: reg 0x14: [mem 0xfc000000-0xfc003fff]
[    0.586952] pci 0000:09:03.1: supports D1 D2
[    0.586953] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.587034] pci 0000:09:03.2: [104c:803b] type 00 class 0x018000
[    0.587064] pci 0000:09:03.2: reg 0x10: [mem 0xfc005000-0xfc005fff]
[    0.587198] pci 0000:09:03.2: supports D1 D2
[    0.587199] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
[    0.587353] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[    0.587362] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.587373] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.587375] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.587376] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.587378] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.587379] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.587381] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.587382] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.587384] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.587425] pci_bus 0000:0a: extended config space not accessible
[    0.587447] pci_bus 0000:0a: busn_res: [bus 0a] end can not be updated to 0d
[    0.587456] pci 0000:00:1e.0: bridge has subordinate 0a but max busn 0d
[    0.587704] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.587804] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.587903] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.588002] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.588101] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.588200] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.588299] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.588402] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.588755] ACPI: EC: interrupt unblocked
[    0.588771] ACPI: EC: event unblocked
[    0.588781] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.588783] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[    0.588877] iommu: Default domain type: Translated 
[    0.589102] SCSI subsystem initialized
[    0.589140] libata version 3.00 loaded.
[    0.589156] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.589156] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.589156] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.589156] vgaarb: loaded
[    0.589156] ACPI: bus type USB registered
[    0.589156] usbcore: registered new interface driver usbfs
[    0.589156] usbcore: registered new interface driver hub
[    0.589156] usbcore: registered new device driver usb
[    0.589156] pps_core: LinuxPPS API ver. 1 registered
[    0.589156] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.589156] PTP clock support registered
[    0.589156] EDAC MC: Ver: 3.0.0
[    0.589156] PCI: Using ACPI for IRQ routing
[    0.599847] PCI: pci_cache_line_size set to 64 bytes
[    0.600016] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.600017] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
[    0.600133] NetLabel: Initializing
[    0.600134] NetLabel:  domain hash size = 128
[    0.600134] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.600164] NetLabel:  unlabeled traffic allowed by default
[    0.600183] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.600183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.600183] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.600351] clocksource: Switched to clocksource tsc-early
[    0.620098] *** VALIDATE bpf ***
[    0.620254] VFS: Disk quotas dquot_6.6.0
[    0.620278] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.620323] *** VALIDATE ramfs ***
[    0.620328] *** VALIDATE hugetlbfs ***
[    0.620474] AppArmor: AppArmor Filesystem Enabled
[    0.620526] pnp: PnP ACPI init
[    0.637233] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.637235] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.637237] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.637239] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.637240] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.637242] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.637244] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.637245] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.637253] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637681] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.637687] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.637760] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.637762] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.637764] system 00:02: [io  0x1000-0x107f] has been reserved
[    0.637765] system 00:02: [io  0x1180-0x11bf] has been reserved
[    0.637767] system 00:02: [io  0x1640-0x164f] has been reserved
[    0.637769] system 00:02: [io  0xfe00-0xfe7f] has been reserved
[    0.637771] system 00:02: [io  0xfe80-0xfeff] has been reserved
[    0.637776] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637813] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.637847] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.637879] pnp 00:05: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.637897] pnp: PnP ACPI: found 6 devices
[    0.639879] thermal_sys: Registered thermal governor 'fair_share'
[    0.639880] thermal_sys: Registered thermal governor 'bang_bang'
[    0.639881] thermal_sys: Registered thermal governor 'step_wise'
[    0.639882] thermal_sys: Registered thermal governor 'user_space'
[    0.639883] thermal_sys: Registered thermal governor 'power_allocator'
[    0.644410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.644458] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.644460] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[    0.644462] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[    0.644475] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 09-0a] add_size 1000
[    0.644486] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.644491] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.644494] pci 0000:00:1c.4: BAR 13: assigned [io  0x6000-0x6fff]
[    0.644497] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.644500] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0400000-0xc04000ff]
[    0.644508] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.644510] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.644513] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.644514] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.644518] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.644520] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.644524] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.644529] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.644536] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.644542] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.644551] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.644556] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.644563] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.644568] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.644578] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[    0.644582] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.644590] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.644596] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.644604] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    0.644609] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.644616] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.644622] pci 0000:00:1c.4:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.644634] pci 0000:09:03.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[    0.644637] pci 0000:09:03.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.644639] pci 0000:09:03.0: BAR 13: assigned [io  0x7000-0x70ff]
[    0.644641] pci 0000:09:03.0: BAR 14: assigned [io  0x7400-0x74ff]
[    0.644643] pci 0000:09:03.0: CardBus bridge to [bus 0a]
[    0.644644] pci 0000:09:03.0:   bridge window [io  0x7000-0x70ff]
[    0.644650] pci 0000:09:03.0:   bridge window [io  0x7400-0x74ff]
[    0.644657] pci 0000:09:03.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
[    0.644663] pci 0000:09:03.0:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.644670] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[    0.644674] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.644682] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.644694] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.644695] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.644697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644698] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.644700] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.644701] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.644703] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.644704] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.644706] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.644707] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[    0.644708] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.644710] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.644711] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.644713] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.644714] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.644715] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.644717] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.644718] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.644720] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.644721] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.644722] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.644724] pci_bus 0000:08: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.644725] pci_bus 0000:08: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.644727] pci_bus 0000:09: resource 0 [io  0x7000-0x7fff]
[    0.644728] pci_bus 0000:09: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.644730] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7 window]
[    0.644731] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff window]
[    0.644733] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644734] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.644735] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.644737] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.644738] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.644739] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.644741] pci_bus 0000:0a: resource 0 [io  0x7000-0x70ff]
[    0.644742] pci_bus 0000:0a: resource 1 [io  0x7400-0x74ff]
[    0.644744] pci_bus 0000:0a: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[    0.644745] pci_bus 0000:0a: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.644855] NET: Registered protocol family 2
[    0.645227] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.645359] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.645621] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.645686] TCP: Hash tables configured (established 32768 bind 32768)
[    0.645790] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.645827] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.645879] NET: Registered protocol family 1
[    0.645888] NET: Registered protocol family 44
[    0.648281] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.648322] PCI: CLS 64 bytes, default 64
[    0.648380] Trying to unpack rootfs image as initramfs...
[    1.138462] Freeing initrd memory: 83244K
[    1.138539] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.138542] software IO TLB: mapped [mem 0xbbed0000-0xbfed0000] (64MB)
[    1.138774] check: Scanning for low memory corruption every 60 seconds
[    1.139317] Initialise system trusted keyrings
[    1.139333] Key type blacklist registered
[    1.139423] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.141532] zbud: loaded
[    1.142042] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.142284] fuse: init (API version 7.31)
[    1.142313] *** VALIDATE fuse ***
[    1.142315] *** VALIDATE fuse ***
[    1.142450] Platform Keyring initialized
[    1.148780] Key type asymmetric registered
[    1.148781] Asymmetric key parser 'x509' registered
[    1.148794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.148852] io scheduler mq-deadline registered
[    1.150522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.150596] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    1.150596] vesafb: scrolling: redraw
[    1.150598] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.150619] vesafb: framebuffer at 0xcd000000, mapped to 0x(____ptrval____), using 4032k, total 4032k
[    1.150670] fbcon: Deferring console take-over
[    1.150671] fb0: VESA VGA frame buffer device
[    1.150687] intel_idle: does not run on family 6 model 23
[    1.151578] ACPI: AC Adapter [ADP1] (on-line)
[    1.151651] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.151676] ACPI: Lid Switch [LID0]
[    1.151717] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.151759] ACPI: Power Button [PWRB]
[    1.152167] Monitor-Mwait will be used to enter C-1 state
[    1.152174] Monitor-Mwait will be used to enter C-2 state
[    1.152180] Monitor-Mwait will be used to enter C-3 state
[    1.152184] tsc: Marking TSC unstable due to TSC halts in idle
[    1.152262] clocksource: Switched to clocksource hpet
[    1.157581] thermal LNXTHERM:00: registered as thermal_zone0
[    1.157588] ACPI: Thermal Zone [TZ00] (42 C)
[    1.158619] ACPI: Invalid active0 threshold
[    1.160295] thermal LNXTHERM:01: registered as thermal_zone1
[    1.160302] ACPI: Thermal Zone [TZ01] (42 C)
[    1.160491] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.164030] Linux agpgart interface v0.103
[    1.167081] loop: module loaded
[    1.167305] ata_piix 0000:00:1f.1: version 2.13
[    1.168633] scsi host0: ata_piix
[    1.169296] scsi host1: ata_piix
[    1.169356] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    1.169358] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    1.169501] libphy: Fixed MDIO Bus: probed
[    1.169502] tun: Universal TUN/TAP device driver, 1.6
[    1.169785] PPP generic driver version 2.4.2
[    1.169856] VFIO - User Level meta-driver version: 0.3
[    1.169922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.169926] ehci-pci: EHCI PCI platform driver
[    1.170129] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.170136] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.170156] ehci-pci 0000:00:1a.7: debug port 1
[    1.174095] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.174109] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc304800
[    1.188395] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.188446] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.188448] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188450] usb usb1: Product: EHCI Host Controller
[    1.188451] usb usb1: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    1.188453] usb usb1: SerialNumber: 0000:00:1a.7
[    1.188623] hub 1-0:1.0: USB hub found
[    1.188631] hub 1-0:1.0: 4 ports detected
[    1.189032] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.189037] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.189053] ehci-pci 0000:00:1d.7: debug port 1
[    1.192976] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.192990] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc304c00
[    1.208388] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.208448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.208450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.208452] usb usb2: Product: EHCI Host Controller
[    1.208453] usb usb2: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    1.208454] usb usb2: SerialNumber: 0000:00:1d.7
[    1.208593] hub 2-0:1.0: USB hub found
[    1.208605] hub 2-0:1.0: 6 ports detected
[    1.208860] ehci-platform: EHCI generic platform driver
[    1.208871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.208878] ohci-pci: OHCI PCI platform driver
[    1.208891] ohci-platform: OHCI generic platform driver
[    1.208897] uhci_hcd: USB Universal Host Controller Interface driver
[    1.209073] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.209078] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.209087] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.209121] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    1.209193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.209195] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.209196] usb usb3: Product: UHCI Host Controller
[    1.209197] usb usb3: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.209198] usb usb3: SerialNumber: 0000:00:1a.0
[    1.209345] hub 3-0:1.0: USB hub found
[    1.209352] hub 3-0:1.0: 2 ports detected
[    1.209662] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.209667] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.209675] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.209710] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    1.209764] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.209766] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.209767] usb usb4: Product: UHCI Host Controller
[    1.209769] usb usb4: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.209770] usb usb4: SerialNumber: 0000:00:1a.1
[    1.209918] hub 4-0:1.0: USB hub found
[    1.209924] hub 4-0:1.0: 2 ports detected
[    1.210224] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.210230] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.210237] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.210259] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.210313] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.210315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.210316] usb usb5: Product: UHCI Host Controller
[    1.210317] usb usb5: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.210318] usb usb5: SerialNumber: 0000:00:1d.0
[    1.210464] hub 5-0:1.0: USB hub found
[    1.210470] hub 5-0:1.0: 2 ports detected
[    1.210761] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.210766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.210773] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.210804] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    1.210857] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.210858] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.210860] usb usb6: Product: UHCI Host Controller
[    1.210861] usb usb6: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.210862] usb usb6: SerialNumber: 0000:00:1d.1
[    1.210996] hub 6-0:1.0: USB hub found
[    1.211003] hub 6-0:1.0: 2 ports detected
[    1.211298] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.211303] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.211310] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.211334] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    1.211403] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.211405] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.211406] usb usb7: Product: UHCI Host Controller
[    1.211407] usb usb7: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.211408] usb usb7: SerialNumber: 0000:00:1d.2
[    1.211535] hub 7-0:1.0: USB hub found
[    1.211542] hub 7-0:1.0: 2 ports detected
[    1.211736] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.216709] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.216713] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.217042] mousedev: PS/2 mouse device common for all mice
[    1.217397] rtc_cmos 00:03: RTC can wake from S4
[    1.217751] rtc_cmos 00:03: registered as rtc0
[    1.217768] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.217775] i2c /dev entries driver
[    1.217833] device-mapper: uevent: version 1.0.3
[    1.217991] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.218016] platform eisa.0: Probing EISA bus 0
[    1.218017] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.218019] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.218020] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.218022] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.218023] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.218024] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.218026] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.218027] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.218029] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.218030] platform eisa.0: EISA: Detected 0 cards
[    1.218034] intel_pstate: CPU model not supported
[    1.218095] ledtrig-cpu: registered to indicate activity on CPUs
[    1.218169] drop_monitor: Initializing network drop monitor service
[    1.218408] NET: Registered protocol family 10
[    1.220200] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.223355] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.233285] Segment Routing with IPv6
[    1.233314] NET: Registered protocol family 17
[    1.233375] Key type dns_resolver registered
[    1.233588] RAS: Correctable Errors collector initialized.
[    1.233632] microcode: sig=0x10676, pf=0x80, revision=0x60f
[    1.233705] microcode: Microcode Update Driver: v2.2.
[    1.233710] IPI shorthand broadcast: enabled
[    1.233811] registered taskstats version 1
[    1.233825] Loading compiled-in X.509 certificates
[    1.236687] Loaded X.509 cert 'Build time autogenerated kernel key: 9e1aeb581c5145b0cc48f50fdf6e09edec23120f'
[    1.236720] zswap: loaded using pool lzo/zbud
[    1.236849] Key type ._fscrypt registered
[    1.236850] Key type .fscrypt registered
[    1.247276] Key type big_key registered
[    1.252658] Key type encrypted registered
[    1.252661] AppArmor: AppArmor sha1 policy hashing enabled
[    1.252668] ima: No TPM chip found, activating TPM-bypass!
[    1.252674] ima: Allocated hash algorithm: sha1
[    1.252683] ima: No architecture policies found
[    1.252698] evm: Initialising EVM extended attributes:
[    1.252699] evm: security.selinux
[    1.252700] evm: security.SMACK64
[    1.252700] evm: security.SMACK64EXEC
[    1.252701] evm: security.SMACK64TRANSMUTE
[    1.252701] evm: security.SMACK64MMAP
[    1.252702] evm: security.apparmor
[    1.252703] evm: security.ima
[    1.252703] evm: security.capability
[    1.252704] evm: HMAC attrs: 0x1
[    1.253182] PM:   Magic number: 0:608:496
[    1.253351] rtc_cmos 00:03: setting system clock to 2020-08-22T19:27:09 UTC (1598124429)
[    1.254235] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    1.348463] ata1.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
[    1.354912] scsi 0:0:0:0: CD-ROM            Optiarc  CD-RW CRX880A    KX07 PQ: 0 ANSI: 5
[    1.410555] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.410556] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.410848] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.410987] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.412999] Freeing unused decrypted memory: 2040K
[    1.414136] Freeing unused kernel image memory: 2712K
[    1.424382] Write protecting the kernel read-only data: 22528k
[    1.425664] Freeing unused kernel image memory: 2008K
[    1.426415] Freeing unused kernel image memory: 1192K
[    1.439630] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.439666] x86/mm: Checking user space page tables
[    1.452355] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.452360] Run /init as init process
[    1.611188] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20190816/utaddress-204)
[    1.611196] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.611201] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190816/utaddress-204)
[    1.611204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.611205] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190816/utaddress-204)
[    1.611208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.611209] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.615156] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.618520] ahci 0000:00:1f.2: version 3.0
[    1.619908] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.619910] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    1.621497] scsi host2: ahci
[    1.621656] scsi host3: ahci
[    1.627086] scsi host4: ahci
[    1.627167] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 29
[    1.627168] ata4: DUMMY
[    1.627169] ata5: DUMMY
[    1.668400] random: fast init done
[    1.669056] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.676450] firewire_ohci 0000:09:03.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.676567] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.676580] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.752388] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.939809] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.941558] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.941560] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.941762] ata3.00: ATA-9: SAMSUNG MZ7LF128HCHP-00004, FXT0201Q, max UDMA/133
[    1.941764] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.942653] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.942655] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.943124] ata3.00: configured for UDMA/133
[    1.943335] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG MZ7LF128 201Q PQ: 0 ANSI: 5
[    1.943783] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.943965] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.944018] sd 2:0:0:0: [sda] Write Protect is off
[    1.944020] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.944108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.949424] usb 7-1: New USB device found, idVendor=044e, idProduct=3011, bcdDevice= 1.00
[    1.949426] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.949428] usb 7-1: Product: BCM2045B2
[    1.949429] usb 7-1: Manufacturer: Broadcom
[    1.951442] hub 7-1:1.0: USB hub found
[    1.953416] hub 7-1:1.0: 3 ports detected
[    1.957525]  sda: sda1 sda2 < sda5 sda6 >
[    1.958166] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.212535] firewire_core 0000:09:03.1: created device fw0: GUID 08004603029fd3e3, S400
[    2.248372] usb 7-1.1: new full-speed USB device number 3 using uhci_hcd
[    2.395426] usb 7-1.1: New USB device found, idVendor=044e, idProduct=3010, bcdDevice= 0.56
[    2.395428] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.395430] usb 7-1.1: Product: BCM2046 Bluetooth Device
[    2.395432] usb 7-1.1: Manufacturer: Broadcom Corp
[    2.395433] usb 7-1.1: SerialNumber: 001E3D897E4C
[    2.480387] usb 7-1.2: new full-speed USB device number 4 using uhci_hcd
[    2.584273] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
[    2.614430] usb 7-1.2: New USB device found, idVendor=044e, idProduct=3013, bcdDevice= 1.00
[    2.614432] usb 7-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.619728] hidraw: raw HID events driver (C) Jiri Kosina
[    2.623656] usbcore: registered new interface driver usbhid
[    2.623656] usbhid: USB HID core driver
[    2.626451] input: HID 044e:3013 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0/0003:044E:3013.0001/input/input5
[    2.684581] hid-generic 0003:044E:3013.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2/input0
[    2.696372] usb 7-1.3: new full-speed USB device number 5 using uhci_hcd
[    2.829438] usb 7-1.3: New USB device found, idVendor=044e, idProduct=3012, bcdDevice= 1.00
[    2.829440] usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.837017] input: HID 044e:3012 Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.3/7-1.3:1.0/0003:044E:3012.0002/input/input6
[    2.837156] hid-generic 0003:044E:3012.0002: input,hidraw1: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3/input0
[   98.319514] random: crng init done
[   98.319517] random: 7 urandom warning(s) missed due to ratelimiting
[ 1597.320702] cryptd: max_cpu_qlen set to 1000
[ 1597.568337] raid6: sse2x4   gen()  8225 MB/s
[ 1597.616353] raid6: sse2x4   xor()  6124 MB/s
[ 1597.664348] raid6: sse2x2   gen()  4793 MB/s
[ 1597.712338] raid6: sse2x2   xor()  5649 MB/s
[ 1597.760346] raid6: sse2x1   gen()  4020 MB/s
[ 1597.808341] raid6: sse2x1   xor()  4621 MB/s
[ 1597.808349] raid6: using algorithm sse2x4 gen() 8225 MB/s
[ 1597.808350] raid6: .... xor() 6124 MB/s, rmw enabled
[ 1597.808351] raid6: using ssse3x2 recovery algorithm
[ 1597.812134] xor: measuring software checksum speed
[ 1597.848366]    prefetch64-sse: 15477.000 MB/sec
[ 1597.888370]    generic_sse: 12994.000 MB/sec
[ 1597.888371] xor: using function: prefetch64-sse (15477.000 MB/sec)
[ 1597.912972] Btrfs loaded, crc32c=crc32c-generic
[ 1598.177037] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1598.561705] systemd[1]: Inserted module 'autofs4'
[ 1598.594196] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1598.612491] systemd[1]: Detected architecture x86-64.
[ 1598.630025] systemd[1]: Set hostname to <Lui>.
[ 1598.866150] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 1598.983720] systemd[1]: Created slice system-modprobe.slice.
[ 1598.984235] systemd[1]: Created slice Cryptsetup Units Slice.
[ 1598.984718] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1598.985233] systemd[1]: Created slice system-tor.slice.
[ 1598.985670] systemd[1]: Created slice User and Session Slice.
[ 1598.985770] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1598.986049] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1598.986203] systemd[1]: Reached target User and Group Name Lookups.
[ 1598.986253] systemd[1]: Reached target Remote File Systems.
[ 1598.986292] systemd[1]: Reached target Slices.
[ 1598.986432] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1598.986567] systemd[1]: Listening on LVM2 poll daemon socket.
[ 1598.988942] systemd[1]: Listening on Syslog Socket.
[ 1598.991773] systemd[1]: Listening on Process Core Dump Socket.
[ 1598.991899] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1598.992005] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1598.992260] systemd[1]: Listening on Journal Audit Socket.
[ 1598.992410] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1598.992576] systemd[1]: Listening on Journal Socket.
[ 1598.992728] systemd[1]: Listening on udev Control Socket.
[ 1598.992846] systemd[1]: Listening on udev Kernel Socket.
[ 1598.994243] systemd[1]: Mounting Huge Pages File System...
[ 1598.995760] systemd[1]: Mounting POSIX Message Queue File System...
[ 1598.997394] systemd[1]: Mounting Kernel Debug File System...
[ 1598.999130] systemd[1]: Mounting Kernel Trace File System...
[ 1599.001452] systemd[1]: Starting Journal Service...
[ 1599.002987] systemd[1]: Starting Availability of block devices...
[ 1599.006780] systemd[1]: Starting Set the console keyboard layout...
[ 1599.010085] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1599.013132] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 1599.018036] systemd[1]: Starting Load Kernel Module drm...
[ 1599.018815] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 1599.018894] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1599.022509] systemd[1]: Starting Load Kernel Modules...
[ 1599.024074] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1599.028627] systemd[1]: Starting udev Coldplug all Devices...
[ 1599.036126] systemd[1]: Starting Uncomplicated firewall...
[ 1599.042320] systemd[1]: Mounted Huge Pages File System.
[ 1599.043742] systemd[1]: Mounted POSIX Message Queue File System.
[ 1599.044518] systemd[1]: Mounted Kernel Debug File System.
[ 1599.045300] systemd[1]: Mounted Kernel Trace File System.
[ 1599.048956] systemd[1]: Finished Availability of block devices.
[ 1599.052517] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1599.060594] systemd[1]: Finished Uncomplicated firewall.
[ 1599.069102] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=60
[ 1599.079179] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1599.080491] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 1599.080556] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 1599.081972] systemd[1]: Starting Load/Save Random Seed...
[ 1599.083430] systemd[1]: Starting Create System Users...
[ 1599.097351] systemd[1]: modprobe@drm.service: Succeeded.
[ 1599.097907] systemd[1]: Finished Load Kernel Module drm.
[ 1599.144028] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 1599.146449] lp: driver loaded but no devices found
[ 1599.157894] systemd[1]: Finished Load/Save Random Seed.
[ 1599.162651] systemd[1]: Finished Create System Users.
[ 1599.164262] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1599.174422] ppdev: user-space parallel port driver
[ 1599.184692] systemd[1]: Finished Load Kernel Modules.
[ 1599.186843] systemd[1]: Mounting FUSE Control File System...
[ 1599.188475] systemd[1]: Mounting Kernel Configuration File System...
[ 1599.194142] systemd[1]: Starting Apply Kernel Variables...
[ 1599.197114] systemd[1]: Mounted Kernel Configuration File System.
[ 1599.201996] systemd[1]: Mounted FUSE Control File System.
[ 1599.207170] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1599.209752] systemd[1]: Starting udev Kernel Device Manager...
[ 1599.232319] systemd[1]: Finished Apply Kernel Variables.
[ 1599.346275] systemd[1]: Finished Set the console keyboard layout.
[ 1599.346609] systemd[1]: Reached target Local File Systems (Pre).
[ 1599.364032] systemd[1]: Finished udev Coldplug all Devices.
[ 1599.366876] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 1599.376722] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 1599.402348] systemd[1]: Started udev Kernel Device Manager.
[ 1599.403975] systemd[1]: Starting Show Plymouth Boot Screen...
[ 1599.431330] systemd[1]: plymouth-start.service: Succeeded.
[ 1599.432153] systemd[1]: Started Show Plymouth Boot Screen.
[ 1599.432481] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 1599.432678] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 1599.444032] systemd[1]: Started Journal Service.
[ 1599.457124] systemd-journald[468]: Received client request to flush runtime journal.
[ 1600.263023] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input8
[ 1600.322364] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input9
[ 1600.399197] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1600.419147] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1600.500359] tifm_core: MMC/SD card detected in socket 0:1
[ 1600.507053] sony_laptop: SNC setup done.
[ 1600.531004] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
[ 1600.531027] yenta_cardbus 0000:09:03.0: Enabling burst memory read transactions
[ 1600.531034] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
[ 1600.531036] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
[ 1600.531043] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
[ 1600.580395] nvidia: loading out-of-tree module taints kernel.
[ 1600.580405] nvidia: module license 'NVIDIA' taints kernel.
[ 1600.580406] Disabling lock debugging due to kernel taint
[ 1600.658058] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1600.679875] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 1600.683420] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 1600.683430] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.108  Wed Dec 11 11:06:58 PST 2019
[ 1600.692386] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 1600.692387] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 1600.692456] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1600.700236] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 1600.743124] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 1600.747110] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 1600.753178] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
[ 1600.753398] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 1600.777274] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 1600.777280] yenta_cardbus 0000:09:03.0: Socket status: 30000006
[ 1600.777286] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[ 1600.777288] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc000000-0xfc0fffff]
[ 1600.777290] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc000000-0xfc0fffff:
[ 1600.777293]  excluding 0xfc000000-0xfc00ffff
[ 1601.057128] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1601.103761] intel_powerclamp: No package C-state available
[ 1601.137309] intel_powerclamp: No package C-state available
[ 1601.345146] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9872AK: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:speaker
[ 1601.345150] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1601.345151] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 1601.345153] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[ 1601.345154] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x11/0x0
[ 1601.345155] snd_hda_codec_idt hdaudioC0D0:    inputs:
[ 1601.345157] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x14
[ 1601.345159] snd_hda_codec_idt hdaudioC0D0:      Mic=0xd
[ 1601.376239] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1601.376314] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1601.388411] Adding 999420k swap on /dev/mapper/yyy-swap_1.  Priority:-2 extents:1 across:999420k SSFS
[ 1601.579029] audit: type=1400 audit(1598126029.819:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=773 comm="apparmor_parser"
[ 1601.579034] audit: type=1400 audit(1598126029.819:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=773 comm="apparmor_parser"
[ 1601.579037] audit: type=1400 audit(1598126029.819:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=773 comm="apparmor_parser"
[ 1601.582261] audit: type=1400 audit(1598126029.823:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=772 comm="apparmor_parser"
[ 1601.582265] audit: type=1400 audit(1598126029.823:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=772 comm="apparmor_parser"
[ 1601.589863] audit: type=1400 audit(1598126029.831:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=774 comm="apparmor_parser"
[ 1601.593816] audit: type=1400 audit(1598126029.835:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_ttu" pid=775 comm="apparmor_parser"
[ 1601.602599] audit: type=1400 audit(1598126029.843:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=776 comm="apparmor_parser"
[ 1601.602603] audit: type=1400 audit(1598126029.843:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=776 comm="apparmor_parser"
[ 1601.606146] audit: type=1400 audit(1598126029.847:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=777 comm="apparmor_parser"
[ 1601.869635] iwl4965 0000:06:00.0 wlp6s0: renamed from wlan0
[ 1602.199566] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 1602.199575]  excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 1602.199602] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 1602.199612]  excluding 0xa0000000-0xa0ffffff
[ 1602.199631] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 1602.199640]  excluding 0x60000000-0x60ffffff
[ 1602.434147] zram: Added device: zram0
[ 1602.434280] zram: Added device: zram1
[ 1602.478232] zram0: detected capacity change from 0 to 1031557120
[ 1602.544668] Adding 1007376k swap on /dev/zram0.  Priority:5 extents:1 across:1007376k SSFS
[ 1602.552160] zram1: detected capacity change from 0 to 1031557120
[ 1602.612582] Adding 1007376k swap on /dev/zram1.  Priority:5 extents:1 across:1007376k SSFS
[ 1602.704752] nvidia_uvm: Loaded the UVM driver, major device number 240
[ 1603.071924] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1603.072121] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 1604.393181] NVRM: Your system is not currently configured to drive a VGA console
[ 1604.393184] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 1604.393185] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 1604.393186] NVRM: drivers including, but not limited to, vesafb, may result in
[ 1604.393186] NVRM: corruption and stability problems, and is not supported.
[ 1605.467452] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1605.467677] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 1606.797563] wlp6s0: authenticate with 30:7e:cb:b1:5e:ec
[ 1606.815199] wlp6s0: send auth to 30:7e:cb:b1:5e:ec (try 1/3)
[ 1606.817022] wlp6s0: authenticated
[ 1606.817160] wlp6s0: waiting for beacon from 30:7e:cb:b1:5e:ec
[ 1606.860384] wlp6s0: associate with 30:7e:cb:b1:5e:ec (try 1/3)
[ 1606.864067] wlp6s0: RX AssocResp from 30:7e:cb:b1:5e:ec (capab=0x411 status=0 aid=2)
[ 1606.890536] wlp6s0: associated
[ 1607.058728] bpfilter: Loaded bpfilter_umh pid 1225
[ 1607.059104] Started bpfilter
[ 1607.100961] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[ 1607.101913] iwl4965 0000:06:00.0: Enabling power save might cause firmware crashes
[ 1607.478675] Bluetooth: Core ver 2.22
[ 1607.478700] NET: Registered protocol family 31
[ 1607.478701] Bluetooth: HCI device and connection manager initialized
[ 1607.478706] Bluetooth: HCI socket layer initialized
[ 1607.478710] Bluetooth: L2CAP socket layer initialized
[ 1607.478714] Bluetooth: SCO socket layer initialized
[ 1607.550339] usbcore: registered new interface driver btusb
[ 1607.568701] usb 7-1.2: input irq status -75 received
[ 1607.584701] usb 7-1.2: input irq status -75 received
[ 1607.600703] usb 7-1.2: input irq status -75 received
[ 1607.616702] usb 7-1.2: input irq status -75 received
[ 1607.632703] usb 7-1.2: input irq status -75 received
[ 1607.648699] usb 7-1.2: input irq status -75 received
[ 1607.664709] usb 7-1.2: input irq status -75 received
[ 1607.680708] usb 7-1.2: input irq status -75 received
[ 1607.696713] usb 7-1.2: input irq status -75 received
[ 1607.712709] usb 7-1.2: input irq status -75 received
[ 1607.728709] usb 7-1.2: input irq status -75 received
[ 1607.744711] usb 7-1.2: input irq status -75 received
[ 1607.760710] usb 7-1.2: input irq status -75 received
[ 1607.776711] usb 7-1.2: input irq status -75 received
[ 1608.750577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1608.750579] Bluetooth: BNEP filters: protocol multicast
[ 1608.750584] Bluetooth: BNEP socket layer initialized
[ 1608.875336] Bluetooth: RFCOMM TTY layer initialized
[ 1608.875350] Bluetooth: RFCOMM socket layer initialized
[ 1608.875357] Bluetooth: RFCOMM ver 1.11
[ 3471.088439] perf: interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 3816.192387] CE: hpet increased min_delta_ns to 20115 nsec
[ 5181.648860] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 5181.649110] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 5184.052226] perf: interrupt took too long (3162 > 3156), lowering kernel.perf_event_max_sample_rate to 63250
[ 5251.101568] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 5251.101756] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 5740.463722] perf: interrupt took too long (3979 > 3952), lowering kernel.perf_event_max_sample_rate to 50250
[10106.272445] usb 1-2: new high-speed USB device number 3 using ehci-pci
[10106.828437] usb 1-2: device not accepting address 3, error -71
[10939.123013] PM: suspend entry (deep)
[10939.161630] Filesystems sync: 0.038 seconds
[10941.315425] Freezing user space processes ... (elapsed 0.057 seconds) done.
[10941.372735] OOM killer disabled.
[10941.372738] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10941.374256] printk: Suspending console(s) (use no_console_suspend to debug)
[10941.375050] wlp6s0: deauthenticating from 30:cb:b1:e:c by local choice (Reason: 3=DEAUTH_LEAVING)
[10941.417265] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10941.420004] sd 2:0:0:0: [sda] Stopping disk
[10941.484422] ACPI: EC: interrupt blocked
[10941.506692] ACPI: Preparing to enter system sleep state S3
[10941.516002] ACPI: EC: event blocked
[10941.516005] ACPI: EC: EC stopped
[10941.516007] PM: Saving platform NVS memory
[10941.516071] Disabling non-boot CPUs ...
[10941.516987] IRQ 32: no longer affine to CPU1
[10941.518033] smpboot: CPU 1 is now offline
[10941.526293] ACPI: Low-level resume complete
[10941.526293] ACPI: EC: EC started
[10941.526293] PM: Restoring platform NVS memory
[10941.532408] Enabling non-boot CPUs ...
[10941.532497] x86: Booting SMP configuration:
[10941.532498] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10941.518002] microcode: sig=0x10676, pf=0x80, revision=0x607
[10941.518002] microcode: updated to revision 0x60f, date = 2010-09-29
[10941.546025] CPU1 is up
[10941.548967] ACPI: Waking up from system sleep state S3
[10941.557646] ACPI: EC: interrupt unblocked
[10941.579923] usb usb3: root hub lost power or was reset
[10941.580870] usb usb4: root hub lost power or was reset
[10941.582455] usb usb5: root hub lost power or was reset
[10941.582638] usb usb6: root hub lost power or was reset
[10941.582816] usb usb7: root hub lost power or was reset
[10941.594132] sd 2:0:0:0: [sda] Starting disk
[10941.603309] ACPI: EC: event unblocked
[10941.754550] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[10941.754553] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[10941.909416] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10941.909908] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[10941.909911] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10941.910970] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[10941.910972] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10941.911436] ata3.00: configured for UDMA/133
[10941.936432] usb 7-1: reset full-speed USB device number 2 using uhci_hcd
[10942.144445] firewire_core 0000:09:03.1: rediscovered device fw0
[10942.404416] usb 7-1.1: reset full-speed USB device number 3 using uhci_hcd
[10942.600415] usb 7-1.2: reset full-speed USB device number 4 using uhci_hcd
[10942.796404] usb 7-1.3: reset full-speed USB device number 5 using uhci_hcd
[10943.149220] OOM killer enabled.
[10943.149223] Restarting tasks ... done.
[10943.190800] usb 7-1.2: input irq status -75 received
[10943.206797] usb 7-1.2: input irq status -75 received
[10943.223009] usb 7-1.2: input irq status -75 received
[10943.238843] usb 7-1.2: input irq status -75 received
[10943.254962] usb 7-1.2: input irq status -75 received
[10943.264662] PM: suspend exit
[10943.270793] usb 7-1.2: input irq status -75 received
[10943.286808] usb 7-1.2: input irq status -75 received
[10943.302793] usb 7-1.2: input irq status -75 received
[10943.318804] usb 7-1.2: input irq status -75 received
[10943.334791] usb 7-1.2: input irq status -75 received
[10943.350799] usb 7-1.2: input irq status -75 received
[10943.366795] usb 7-1.2: input irq status -75 received
[10943.382799] usb 7-1.2: input irq status -75 received
[10943.398807] usb 7-1.2: input irq status -75 received
[10948.866348] wlp6s0: authenticate with 3:ec
[10948.884232] wlp6s0: send auth to 30:7e:ec (try 1/3)
[10948.886093] wlp6s0: authenticated
[10948.886440] wlp6s0: waiting for beacon from 30:7e5e:ec
[10948.948392] wlp6s0: associate with 30:ec (try 1/3)
[10948.952016] wlp6s0: RX AssocResp from 3e:ec (capab=0x411 status=0 aid=2)
[10948.979329] wlp6s0: associated
[10949.986768] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[15868.492380] usb 1-2: new high-speed USB device number 6 using ehci-pci
[15868.660836] usb 1-2: device descriptor read/all, error -71
[15869.488402] usb 1-2: new high-speed USB device number 7 using ehci-pci
[15869.648324] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[15869.648357] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[15870.766112] mc: Linux media interface: v0.10
[15870.823592] videodev: Linux video capture interface: v2.00
[15870.914646] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[15870.924572] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[15870.924581] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[15870.924586] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[15870.924868] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
[15870.925237] usbcore: registered new interface driver uvcvideo
[15870.925240] USB Video Class driver (1.1.1)
[15871.305923] usbcore: deregistering interface driver uvcvideo
[15871.407485] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[15871.407632] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[15871.407710] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[15871.407784] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[15871.407869] uvcvideo: Unknown symbol vb2_poll (err -2)
[15871.407966] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[15871.408058] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[15871.408140] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[15871.408233] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[15871.408418] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[15871.444763] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[15871.444843] uvcvideo: Unknown symbol vb2_streamon (err -2)
[15871.444940] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[15871.445005] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[15871.445074] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[15871.445140] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[15871.445204] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[15871.445297] uvcvideo: Unknown symbol vb2_buffer_done (err -2)
[15871.445363] uvcvideo: Unknown symbol vb2_plane_vaddr (err -2)
[15871.445476] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[15871.445542] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[15871.445614] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[15871.445742] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[15871.445829] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[15871.445894] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[15871.445958] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[15871.446036] uvcvideo: Unknown symbol vb2_mmap (err -2)
[15871.446140] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[15871.692058] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[15871.707059] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[15871.707066] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[15871.707072] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[15871.707863] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13
[15871.740442] usbcore: registered new interface driver uvcvideo
[15871.740447] USB Video Class driver (1.1.1)
[15877.964397] usb 1-2: reset high-speed USB device number 7 using ehci-pci
[16116.736460] usb 1-2: USB disconnect, device number 7
[29451.364379] usb 1-2: new high-speed USB device number 8 using ehci-pci
[29451.916373] usb 1-2: device not accepting address 8, error -71
[29481.136436] usb 1-2: new high-speed USB device number 10 using ehci-pci
[29481.688437] usb 1-2: device not accepting address 10, error -71
[29496.028446] usb 1-2: new high-speed USB device number 12 using ehci-pci
[29496.188320] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[29496.188326] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[29496.191340] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[29496.195187] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[29496.195560] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[29496.195568] uvcvideo: Failed to initialize the device (-5).
[29497.280657] usbcore: deregistering interface driver uvcvideo
[29497.437325] mc: Linux media interface: v0.10
[29497.463513] videodev: Linux video capture interface: v2.00
[29497.495515] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[29497.499330] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[29497.499336] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[29497.499342] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[29497.499634] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input14
[29497.500004] usbcore: registered new interface driver uvcvideo
[29497.500007] USB Video Class driver (1.1.1)
[29497.859656] usbcore: deregistering interface driver uvcvideo
[29498.001942] mc: Linux media interface: v0.10
[29498.040716] videodev: Linux video capture interface: v2.00
[29498.078622] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[29498.083260] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[29498.083267] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[29498.083272] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[29498.083564] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input15
[29498.083926] usbcore: registered new interface driver uvcvideo
[29498.083929] USB Video Class driver (1.1.1)
[29509.048461] usb 2-2: new high-speed USB device number 3 using ehci-pci
[29509.208149] usb 2-2: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[29509.208155] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29509.208160] usb 2-2: Product: DataTraveler 2.0
[29509.208165] usb 2-2: Manufacturer: Kingston
[29509.208170] usb 2-2: SerialNumber: 50E5495131F7FA9D
[29509.956878] usb-storage 2-2:1.0: USB Mass Storage device detected
[29509.962432] scsi host5: usb-storage 2-2:1.0
[29509.962778] usbcore: registered new interface driver usb-storage
[29509.983858] usbcore: registered new interface driver uas
[29511.007026] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[29511.007755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[29511.008569] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[29511.009297] sd 5:0:0:0: [sdb] Write Protect is off
[29511.009304] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[29511.009924] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[29511.033072]  sdb: sdb1
[29511.036805] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[29511.859417] usb 2-2: USB disconnect, device number 3
[29512.512405] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[29512.648402] usb 5-2: device descriptor read/64, error -71
[29512.892392] usb 5-2: device descriptor read/64, error -71
[29512.943216] show_signal_msg: 15 callbacks suppressed
[29512.943223] csd-automount[4891]: segfault at 8 ip 000055e630ed7430 sp 00007ffcbef93050 error 4 in csd-automount[55e630ed5000+5000]
[29512.943244] Code: 31 00 00 49 89 c6 e8 bf eb ff ff 4c 89 f6 4c 89 f7 49 89 c4 e8 77 ee ff ff 48 8b 04 24 4c 89 e7 <48>  ff ff 4c 89 e7 e8 5f ee ff ff 48 8b 3c 24 e8
[29513.132389] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[29513.272398] usb 5-2: device descriptor read/64, error -71
[29513.516390] usb 5-2: device descriptor read/64, error -71
[29513.624465] usb usb5-port2: attempt power cycle
[29513.624489] usb usb5-port2: failed to disable port power
[29513.752388] usb 5-2: new full-speed USB device number 4 using uhci_hcd
[29514.172404] usb 5-2: device not accepting address 4, error -71
[29514.300571] usb 5-2: new full-speed USB device number 5 using uhci_hcd
[29514.724366] usb 5-2: device not accepting address 5, error -71
[29514.724438] usb usb5-port2: unable to enumerate USB device
[29537.764415] usb 2-2: new high-speed USB device number 6 using ehci-pci
[29537.924175] usb 2-2: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[29537.924182] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29537.924188] usb 2-2: Product: DataTraveler 2.0
[29537.924193] usb 2-2: Manufacturer: Kingston
[29537.924197] usb 2-2: SerialNumber: 50E5495950FA9D
[29537.926521] usb-storage 2-2:1.0: USB Mass Storage device detected
[29537.929857] scsi host5: usb-storage 2-2:1.0
[29538.962624] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[29538.963497] sd 5:0:0:0: Attached scsi generic sg2 type 0
[29538.964189] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[29538.964820] sd 5:0:0:0: [sdb] Write Protect is off
[29538.964826] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[29538.965440] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[29538.980964]  sdb: sdb1
[29538.983691] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[29758.233094] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[29758.233103] sr 0:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current] 
[29758.233111] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed
[29758.233119] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[29758.233127] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[29758.233249] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233257] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233266] Buffer I/O error on dev sr0, logical block 0, async page read
[29758.233324] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233331] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233337] Buffer I/O error on dev sr0, logical block 1, async page read
[29758.233389] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233396] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233401] Buffer I/O error on dev sr0, logical block 2, async page read
[29758.233452] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233458] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233464] Buffer I/O error on dev sr0, logical block 3, async page read
[29758.233516] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233522] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233528] Buffer I/O error on dev sr0, logical block 4, async page read
[29758.233770] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233777] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233783] Buffer I/O error on dev sr0, logical block 5, async page read
[29758.233839] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233845] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233851] Buffer I/O error on dev sr0, logical block 6, async page read
[29758.233902] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233909] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233914] Buffer I/O error on dev sr0, logical block 7, async page read
[30081.539381] usb 2-2: USB disconnect, device number 6
[30081.543600] blk_update_request: I/O error, dev sdb, sector 2336 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[30081.543613] Buffer I/O error on dev sdb1, logical block 36, lost async page write
[30081.543640] blk_update_request: I/O error, dev sdb, sector 6293648 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[30081.543646] Buffer I/O error on dev sdb1, logical block 786450, lost async page write
[30081.911455] blk_update_request: I/O error, dev sdb, sector 870208 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
[30081.911482] blk_update_request: I/O error, dev sdb, sector 870448 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[30081.911562] blk_update_request: I/O error, dev sdb, sector 869952 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.911572] Buffer I/O error on dev sdb1, logical block 108488, async page read
[30081.925167] blk_update_request: I/O error, dev sdb, sector 870464 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[30081.925227] blk_update_request: I/O error, dev sdb, sector 870208 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.925236] Buffer I/O error on dev sdb1, logical block 108520, async page read
[30081.925567] blk_update_request: I/O error, dev sdb, sector 870704 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[30081.925626] blk_update_request: I/O error, dev sdb, sector 870464 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.925633] Buffer I/O error on dev sdb1, logical block 108552, async page read
[30081.925811] blk_update_request: I/O error, dev sdb, sector 870720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.925819] Buffer I/O error on dev sdb1, logical block 108584, async page read
[30081.933973] Buffer I/O error on dev sdb1, logical block 108488, async page read
[30088.900446] usb 2-2: new high-speed USB device number 7 using ehci-pci
[30089.676378] usb 2-2: device descriptor read/64, error -71
[30090.128400] usb 5-2: new full-speed USB device number 6 using uhci_hcd
[30090.272417] usb 5-2: device descriptor read/64, error -71
[30090.528416] usb 5-2: device descriptor read/64, error -71
[30091.260423] usb 5-2: new full-speed USB device number 7 using uhci_hcd
[30091.396468] usb 5-2: device descriptor read/64, error -71
[30091.648453] usb 5-2: device descriptor read/64, error -71
[30091.760449] usb usb5-port2: attempt power cycle
[30091.760471] usb usb5-port2: failed to disable port power
[30091.892473] usb 5-2: new full-speed USB device number 8 using uhci_hcd
[30092.316404] usb 5-2: device not accepting address 8, error -71
[30092.444414] usb 5-2: new full-speed USB device number 9 using uhci_hcd
[30092.872375] usb 5-2: device not accepting address 9, error -71
[30092.872426] usb usb5-port2: unable to enumerate USB device
[30459.689739] CE: hpet increased min_delta_ns to 30172 nsec
[30552.352466] usb 1-2: USB disconnect, device number 12
[30553.584388] usb 1-2: new high-speed USB device number 13 using ehci-pci
[30553.744260] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[30553.744268] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30553.744927] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30553.746242] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30553.747867] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30553.747875] uvcvideo: Failed to initialize the device (-5).
[30554.772440] usb 5-2: new full-speed USB device number 10 using uhci_hcd
[30554.912393] usb 5-2: device descriptor read/64, error -71
[30555.160472] usb 5-2: device descriptor read/64, error -71
[30555.396419] usb 5-2: new full-speed USB device number 11 using uhci_hcd
[30555.422464] usb 1-2: USB disconnect, device number 13
[30555.532403] usb 5-2: device descriptor read/64, error -71
[30555.776435] usb 5-2: device descriptor read/64, error -71
[30555.884469] usb usb5-port2: attempt power cycle
[30555.884491] usb usb5-port2: failed to disable port power
[30556.016393] usb 5-2: new full-speed USB device number 12 using uhci_hcd
[30556.244393] usb 1-2: new high-speed USB device number 14 using ehci-pci
[30556.404422] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[30556.404430] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30556.405209] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30556.406509] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30556.406883] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30556.406891] uvcvideo: Failed to initialize the device (-5).
[30556.432393] usb 5-2: device not accepting address 12, error -71
[30556.560446] usb 5-2: new full-speed USB device number 13 using uhci_hcd
[30556.635102] usb 1-2: USB disconnect, device number 14
[30556.976429] usb 5-2: device not accepting address 13, error -71
[30556.976513] usb usb5-port2: unable to enumerate USB device
[30557.072386] usb 1-2: new high-speed USB device number 15 using ehci-pci
[30557.132453] usb 5-2: new full-speed USB device number 14 using uhci_hcd
[30557.236358] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[30557.236365] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30557.237125] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30557.238451] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30557.238828] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30557.238836] uvcvideo: Failed to initialize the device (-5).
[30557.268388] usb 5-2: device descriptor read/64, error -71
[30557.512408] usb 5-2: device descriptor read/64, error -71
[30557.748409] usb 5-2: new full-speed USB device number 15 using uhci_hcd
[30557.884482] usb 5-2: device descriptor read/64, error -71
[30558.128430] usb 5-2: device descriptor read/64, error -71
[30558.236462] usb usb5-port2: attempt power cycle
[30558.236484] usb usb5-port2: failed to disable port power
[30558.368449] usb 5-2: new full-speed USB device number 16 using uhci_hcd
[30558.784445] usb 5-2: device not accepting address 16, error -71
[30558.912421] usb 5-2: new full-speed USB device number 17 using uhci_hcd
[30559.328440] usb 5-2: device not accepting address 17, error -71
[30559.328507] usb usb5-port2: unable to enumerate USB device
[30559.484412] usb 5-2: new full-speed USB device number 18 using uhci_hcd
[30559.620431] usb 5-2: device descriptor read/64, error -71
[30559.864450] usb 5-2: device descriptor read/64, error -71
[30560.104393] usb 5-2: new full-speed USB device number 19 using uhci_hcd
[30560.240407] usb 5-2: device descriptor read/64, error -71
[30560.486803] usb 5-2: device descriptor read/64, error -71
[30560.592452] usb usb5-port2: attempt power cycle
[30560.592476] usb usb5-port2: failed to disable port power
[30560.724390] usb 5-2: new full-speed USB device number 20 using uhci_hcd
[30561.144395] usb 5-2: device not accepting address 20, error -71
[30561.272402] usb 5-2: new full-speed USB device number 21 using uhci_hcd
[30561.688393] usb 5-2: device not accepting address 21, error -71
[30561.688465] usb usb5-port2: unable to enumerate USB device
[30562.013236] usbcore: deregistering interface driver uvcvideo
[30562.170554] mc: Linux media interface: v0.10
[30562.221845] videodev: Linux video capture interface: v2.00
[30562.313246] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30562.325516] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30562.325524] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30562.325529] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30562.327109] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input16
[30562.350997] usbcore: registered new interface driver uvcvideo
[30562.351001] USB Video Class driver (1.1.1)
[30563.523740] usbcore: deregistering interface driver uvcvideo
[30563.552548] usb 5-2: new full-speed USB device number 22 using uhci_hcd
[30563.688384] usb 5-2: device descriptor read/64, error -71
[30563.708468] mc: Linux media interface: v0.10
[30563.739409] videodev: Linux video capture interface: v2.00
[30563.775658] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30563.779478] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30563.779485] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30563.779490] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30563.779731] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input17
[30563.779956] usbcore: registered new interface driver uvcvideo
[30563.779959] USB Video Class driver (1.1.1)
[30563.940380] usb 5-2: device descriptor read/64, error -71
[30564.388381] usb 5-2: new full-speed USB device number 23 using uhci_hcd
[30564.532470] usb 5-2: device descriptor read/64, error -71
[30564.776462] usb 5-2: device descriptor read/64, error -71
[30564.884484] usb usb5-port2: attempt power cycle
[30564.884507] usb usb5-port2: failed to disable port power
[30565.012412] usb 5-2: new full-speed USB device number 24 using uhci_hcd
[30565.432463] usb 5-2: device not accepting address 24, error -71
[30565.560471] usb 5-2: new full-speed USB device number 25 using uhci_hcd
[30565.984465] usb 5-2: device not accepting address 25, error -71
[30565.984528] usb usb5-port2: unable to enumerate USB device
[30566.114018] usbcore: deregistering interface driver uvcvideo
[30566.140388] usb 5-2: new full-speed USB device number 26 using uhci_hcd
[30566.169284] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[30566.256959] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30566.261215] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30566.261222] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30566.261227] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30566.262205] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input18
[30566.264086] usbcore: registered new interface driver uvcvideo
[30566.264088] USB Video Class driver (1.1.1)
[30566.484389] usb 5-2: device descriptor read/64, error -71
[30566.728395] usb 5-2: device descriptor read/64, error -71
[30566.964487] usb 5-2: new full-speed USB device number 27 using uhci_hcd
[30567.100445] usb 5-2: device descriptor read/64, error -71
[30567.344485] usb 5-2: device descriptor read/64, error -71
[30567.452437] usb usb5-port2: attempt power cycle
[30567.452458] usb usb5-port2: failed to disable port power
[30567.580408] usb 5-2: new full-speed USB device number 28 using uhci_hcd
[30567.996483] usb 5-2: device not accepting address 28, error -71
[30568.124483] usb 5-2: new full-speed USB device number 29 using uhci_hcd
[30568.548499] usb 5-2: device not accepting address 29, error -71
[30568.548563] usb usb5-port2: unable to enumerate USB device
[30568.684898] usbcore: deregistering interface driver uvcvideo
[30568.712442] usb 5-2: new full-speed USB device number 30 using uhci_hcd
[30568.852382] usb 5-2: device descriptor read/64, error -71
[30568.862780] mc: Linux media interface: v0.10
[30568.889234] videodev: Linux video capture interface: v2.00
[30568.931221] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30568.937841] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30568.937848] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30568.937854] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30568.938907] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input19
[30568.944142] usbcore: registered new interface driver uvcvideo
[30568.944146] USB Video Class driver (1.1.1)
[30569.096412] usb 5-2: device descriptor read/64, error -71
[30569.332440] usb 5-2: new full-speed USB device number 31 using uhci_hcd
[30569.468389] usb 5-2: device descriptor read/64, error -71
[30569.712419] usb 5-2: device descriptor read/64, error -71
[30569.820470] usb usb5-port2: attempt power cycle
[30569.820492] usb usb5-port2: failed to disable port power
[30569.910928] usb 1-2: USB disconnect, device number 15
[30569.952401] usb 5-2: new full-speed USB device number 32 using uhci_hcd
[30570.368577] usb 5-2: device not accepting address 32, error -71
[30570.496401] usb 5-2: new full-speed USB device number 33 using uhci_hcd
[30570.916378] usb 5-2: device not accepting address 33, error -71
[30570.916446] usb usb5-port2: unable to enumerate USB device
[30571.076390] usb 5-2: new full-speed USB device number 34 using uhci_hcd
[30571.212397] usb 5-2: device descriptor read/64, error -71
[30571.460389] usb 5-2: device descriptor read/64, error -71
[30571.696454] usb 5-2: new full-speed USB device number 35 using uhci_hcd
[30571.836408] usb 5-2: device descriptor read/64, error -71
[30572.084545] usb 5-2: device descriptor read/64, error -71
[30572.192512] usb usb5-port2: attempt power cycle
[30572.192534] usb usb5-port2: failed to disable port power
[30572.324423] usb 5-2: new full-speed USB device number 36 using uhci_hcd
[30572.752398] usb 5-2: device not accepting address 36, error -71
[30572.880433] usb 5-2: new full-speed USB device number 37 using uhci_hcd
[30573.300381] usb 5-2: device not accepting address 37, error -71
[30573.300452] usb usb5-port2: unable to enumerate USB device
[31049.252429] usb 1-2: new high-speed USB device number 16 using ehci-pci
[31049.412399] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[31049.412406] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31049.413079] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31049.414346] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[31049.414748] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[31049.414756] uvcvideo: Failed to initialize the device (-5).
[31050.312433] usb 5-2: new full-speed USB device number 38 using uhci_hcd
[31050.448384] usb 5-2: device descriptor read/64, error -71
[31050.692424] usb 5-2: device descriptor read/64, error -71
[31050.928424] usb 5-2: new full-speed USB device number 39 using uhci_hcd
[31051.064422] usb 5-2: device descriptor read/64, error -71
[31051.308432] usb 5-2: device descriptor read/64, error -71
[31051.416471] usb usb5-port2: attempt power cycle
[31051.416492] usb usb5-port2: failed to disable port power
[31051.544444] usb 5-2: new full-speed USB device number 40 using uhci_hcd
[31051.960421] usb 5-2: device not accepting address 40, error -71
[31052.088407] usb 5-2: new full-speed USB device number 41 using uhci_hcd
[31052.512417] usb 5-2: device not accepting address 41, error -71
[31052.512468] usb usb5-port2: unable to enumerate USB device
[31052.676431] usb 5-2: new full-speed USB device number 42 using uhci_hcd
[31052.794186] usbcore: deregistering interface driver uvcvideo
[31052.812433] usb 5-2: device descriptor read/64, error -71
[31052.929769] mc: Linux media interface: v0.10
[31052.956007] videodev: Linux video capture interface: v2.00
[31052.987963] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31052.992259] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31052.992266] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31052.992271] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31052.992822] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input20
[31052.993189] usbcore: registered new interface driver uvcvideo
[31052.993191] USB Video Class driver (1.1.1)
[31053.064399] usb 5-2: device descriptor read/64, error -71
[31053.508430] usb 5-2: new full-speed USB device number 43 using uhci_hcd
[31053.852428] usb 5-2: device descriptor read/64, error -71
[31054.096421] usb 5-2: device descriptor read/64, error -71
[31054.204421] usb usb5-port2: attempt power cycle
[31054.204444] usb usb5-port2: failed to disable port power
[31054.332429] usb 5-2: new full-speed USB device number 44 using uhci_hcd
[31054.748428] usb 5-2: device not accepting address 44, error -71
[31055.088383] usb 5-2: new full-speed USB device number 45 using uhci_hcd
[31055.512428] usb 5-2: device not accepting address 45, error -71
[31055.512488] usb usb5-port2: unable to enumerate USB device
[31055.668485] usb 5-2: new full-speed USB device number 46 using uhci_hcd
[31055.704444] usbcore: deregistering interface driver uvcvideo
[31055.757194] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[31055.804448] usb 5-2: device descriptor read/64, error -71
[31055.845237] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31055.848782] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31055.848789] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31055.848794] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31055.849699] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input21
[31055.850889] usbcore: registered new interface driver uvcvideo
[31055.850892] USB Video Class driver (1.1.1)
[31056.048483] usb 5-2: device descriptor read/64, error -71
[31056.288394] usb 5-2: new full-speed USB device number 47 using uhci_hcd
[31056.428383] usb 5-2: device descriptor read/64, error -71
[31056.676385] usb 5-2: device descriptor read/64, error -71
[31056.784490] usb usb5-port2: attempt power cycle
[31056.784514] usb usb5-port2: failed to disable port power
[31056.916377] usb 5-2: new full-speed USB device number 48 using uhci_hcd
[31057.332392] usb 5-2: device not accepting address 48, error -71
[31057.460526] usb 5-2: new full-speed USB device number 49 using uhci_hcd
[31057.880380] usb 5-2: device not accepting address 49, error -71
[31057.880446] usb usb5-port2: unable to enumerate USB device
[31289.424440] usb 2-3: new high-speed USB device number 11 using ehci-pci
[31289.840436] usb 2-3: device descriptor read/64, error -71
[31290.784431] usb 2-3: device descriptor read/64, error -71
[31291.720425] usb 2-3: new high-speed USB device number 12 using ehci-pci
[31292.972422] usb 2-3: device descriptor read/64, error -71
[31293.500375] usb 2-3: device descriptor read/64, error -71
[31293.608453] usb usb2-port3: attempt power cycle
[31294.340581] usb 2-3: new high-speed USB device number 13 using ehci-pci
[31294.768423] usb 2-3: device not accepting address 13, error -71
[31295.172429] usb 2-3: new high-speed USB device number 14 using ehci-pci
[31295.204542] usb 2-3: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[31295.204549] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31295.204554] usb 2-3: Product: DataTraveler 2.0
[31295.204559] usb 2-3: Manufacturer: Kingston
[31295.204564] usb 2-3: SerialNumber: 50E549D
[31295.205294] usb-storage 2-3:1.0: USB Mass Storage device detected
[31295.212476] scsi host5: usb-storage 2-3:1.0
[31296.276844] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[31296.278755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[31296.279187] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[31296.279933] sd 5:0:0:0: [sdb] Write Protect is off
[31296.279940] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[31296.280553] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[31296.296958]  sdb: sdb1
[31296.299831] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[31309.984552] usb 1-2: USB disconnect, device number 16
[31382.876426] usb 1-2: new high-speed USB device number 17 using ehci-pci
[31383.040385] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[31383.040393] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31383.041618] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31383.046446] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[31383.046823] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[31383.046831] uvcvideo: Failed to initialize the device (-5).
[31388.746182] usbcore: deregistering interface driver uvcvideo
[31388.888953] mc: Linux media interface: v0.10
[31388.929476] videodev: Linux video capture interface: v2.00
[31388.986660] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31388.989918] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31388.989925] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31388.989930] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31388.990851] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input22
[31388.999698] usbcore: registered new interface driver uvcvideo
[31388.999702] USB Video Class driver (1.1.1)
[31389.330789] usbcore: deregistering interface driver uvcvideo
[31389.441156] videobuf2_v4l2: Unknown symbol vb2_buffer_in_use (err -2)
[31389.441272] videobuf2_v4l2: Unknown symbol vb2_core_queue_init (err -2)
[31389.441341] videobuf2_v4l2: Unknown symbol vb2_verify_memory_type (err -2)
[31389.441408] videobuf2_v4l2: Unknown symbol vb2_core_reqbufs (err -2)
[31389.441475] videobuf2_v4l2: Unknown symbol vb2_core_expbuf (err -2)
[31389.441542] videobuf2_v4l2: Unknown symbol vb2_core_create_bufs (err -2)
[31389.441567] videobuf2_v4l2: Unknown symbol video_devdata (err -2)
[31389.441647] videobuf2_v4l2: Unknown symbol vb2_write (err -2)
[31389.441714] videobuf2_v4l2: Unknown symbol vb2_request_buffer_cnt (err -2)
[31389.441781] videobuf2_v4l2: Unknown symbol vb2_core_queue_release (err -2)
[31389.441798] videobuf2_v4l2: Unknown symbol v4l2_fh_release (err -2)
[31389.441809] videobuf2_v4l2: Unknown symbol v4l2_event_pending (err -2)
[31389.441885] videobuf2_v4l2: Unknown symbol vb2_core_prepare_buf (err -2)
[31389.441951] videobuf2_v4l2: Unknown symbol vb2_read (err -2)
[31389.442017] videobuf2_v4l2: Unknown symbol vb2_core_poll (err -2)
[31389.442084] videobuf2_v4l2: Unknown symbol vb2_core_streamon (err -2)
[31389.442152] videobuf2_v4l2: Unknown symbol vb2_core_querybuf (err -2)
[31389.442219] videobuf2_v4l2: Unknown symbol vb2_core_qbuf (err -2)
[31389.442299] videobuf2_v4l2: Unknown symbol vb2_mmap (err -2)
[31389.442410] videobuf2_v4l2: Unknown symbol vb2_core_dqbuf (err -2)
[31389.442480] videobuf2_v4l2: Unknown symbol vb2_core_streamoff (err -2)
[31389.571427] mc: Linux media interface: v0.10
[31389.633212] videodev: Linux video capture interface: v2.00
[31389.718324] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31389.721578] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31389.721585] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31389.721590] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31389.728935] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input23
[31389.730414] usbcore: registered new interface driver uvcvideo
[31389.730417] USB Video Class driver (1.1.1)
[32085.196525] usb 1-2: USB disconnect, device number 17
[32086.100540] usb 1-2: new high-speed USB device number 18 using ehci-pci
[32086.260329] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32086.260365] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32086.261337] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32086.266287] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32086.266698] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32086.266706] uvcvideo: Failed to initialize the device (-5).
[32087.364041] usbcore: deregistering interface driver uvcvideo
[32087.513195] mc: Linux media interface: v0.10
[32087.548132] videodev: Linux video capture interface: v2.00
[32087.611590] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32087.615043] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32087.615050] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32087.615056] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32087.615301] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input24
[32087.615531] usbcore: registered new interface driver uvcvideo
[32087.615533] USB Video Class driver (1.1.1)
[32087.850478] usbcore: deregistering interface driver uvcvideo
[32087.948951] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[32087.949027] uvcvideo: Unknown symbol v4l2_fh_exit (err -2)
[32087.949120] uvcvideo: Unknown symbol video_ioctl2 (err -2)
[32087.949230] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[32087.950903] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[32087.950971] uvcvideo: Unknown symbol v4l2_format_info (err -2)
[32087.951039] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[32087.951652] uvcvideo: Unknown symbol vb2_poll (err -2)
[32087.951732] uvcvideo: Unknown symbol v4l2_fh_del (err -2)
[32087.951797] uvcvideo: Unknown symbol v4l2_fh_add (err -2)
[32087.951863] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[32087.951948] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[32087.952023] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[32087.952089] uvcvideo: Unknown symbol v4l2_subdev_init (err -2)
[32087.952153] uvcvideo: Unknown symbol v4l2_fh_open (err -2)
[32087.952230] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[32087.952302] uvcvideo: Unknown symbol v4l2_device_register_subdev (err -2)
[32087.952472] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[32087.965007] usb 1-2: USB disconnect, device number 18
[32087.994394] uvcvideo: Unknown symbol video_devdata (err -2)
[32087.994464] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[32087.994539] uvcvideo: Unknown symbol vb2_streamon (err -2)
[32087.994604] uvcvideo: Unknown symbol v4l2_ctrl_replace (err -2)
[32087.994672] uvcvideo: Unknown symbol v4l2_type_names (err -2)
[32087.994750] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[32087.994815] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[32087.994883] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[32087.994947] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[32087.995011] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[32087.995101] uvcvideo: Unknown symbol vb2_buffer_done (err -2)
[32087.995165] uvcvideo: Unknown symbol vb2_plane_vaddr (err -2)
[32087.995230] uvcvideo: Unknown symbol v4l2_fh_init (err -2)
[32087.995302] uvcvideo: Unknown symbol video_unregister_device (err -2)
[32087.995366] uvcvideo: Unknown symbol v4l2_prio_init (err -2)
[32087.995437] uvcvideo: Unknown symbol v4l2_event_subscribe (err -2)
[32087.995507] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[32087.995571] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[32087.995642] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[32087.995718] uvcvideo: Unknown symbol v4l2_device_register (err -2)
[32087.995799] uvcvideo: Unknown symbol v4l2_ctrl_merge (err -2)
[32087.995900] uvcvideo: Unknown symbol __video_register_device (err -2)
[32087.995965] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[32087.996048] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[32087.996113] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[32087.996177] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[32087.996244] uvcvideo: Unknown symbol v4l2_device_unregister (err -2)
[32087.996311] uvcvideo: Unknown symbol vb2_mmap (err -2)
[32087.996447] uvcvideo: Unknown symbol v4l2_event_queue_fh (err -2)
[32088.006923] uvcvideo: Unknown symbol v4l2_event_unsubscribe (err -2)
[32088.006998] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[32088.098046] videodev: Linux video capture interface: v2.00
[32088.162396] usbcore: registered new interface driver uvcvideo
[32088.162400] USB Video Class driver (1.1.1)
[32088.380472] usb 1-2: new high-speed USB device number 19 using ehci-pci
[32088.540318] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32088.540326] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32088.543474] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32088.544779] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32088.545159] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32088.545167] uvcvideo: Failed to initialize the device (-5).
[32088.598646] usb 1-2: USB disconnect, device number 19
[32089.016432] usb 1-2: new high-speed USB device number 20 using ehci-pci
[32089.176320] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32089.176328] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32089.178989] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32089.180943] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32089.181346] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32089.181354] uvcvideo: Failed to initialize the device (-5).
[32090.242229] usbcore: deregistering interface driver uvcvideo
[32090.421276] mc: Linux media interface: v0.10
[32090.481080] videodev: Linux video capture interface: v2.00
[32090.550047] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32090.553743] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32090.553750] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32090.553755] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32090.554605] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input25
[32090.564723] usbcore: registered new interface driver uvcvideo
[32090.564728] USB Video Class driver (1.1.1)
[32090.818417] usbcore: deregistering interface driver uvcvideo
[32090.868755] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[32090.868845] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[32090.868862] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[32090.868876] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[32090.868898] uvcvideo: Unknown symbol vb2_poll (err -2)
[32090.868932] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[32090.868978] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[32090.868999] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[32090.869030] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[32090.869074] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[32090.869096] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[32090.869110] uvcvideo: Unknown symbol vb2_streamon (err -2)
[32090.869144] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[32090.869151] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[32090.869162] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[32090.869169] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[32090.869176] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[32090.869267] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[32090.869275] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[32090.869349] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[32090.869375] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[32090.869383] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[32090.869390] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[32090.869575] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[32091.004636] mc: Linux media interface: v0.10
[32091.040904] videodev: Linux video capture interface: v2.00
[32091.085834] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32091.089548] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32091.089555] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32091.089560] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32091.090310] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input26
[32091.090671] usbcore: registered new interface driver uvcvideo
[32091.090674] USB Video Class driver (1.1.1)
[32092.076299] usbcore: deregistering interface driver uvcvideo
[32092.266186] mc: Linux media interface: v0.10
[32092.301675] videodev: Linux video capture interface: v2.00
[32092.346590] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32092.349212] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32092.349219] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32092.349224] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32092.349755] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input27
[32092.350169] usbcore: registered new interface driver uvcvideo
[32092.350171] USB Video Class driver (1.1.1)
[32092.509641] usbcore: deregistering interface driver uvcvideo
[32092.644635] videobuf2_common: Unknown symbol media_request_object_init (err -2)
[32092.644728] videobuf2_common: Unknown symbol media_request_object_unbind (err -2)
[32092.644869] videobuf2_common: Unknown symbol media_request_object_put (err -2)
[32092.644958] videobuf2_common: Unknown symbol v4l_vb2q_enable_media_source (err -2)
[32092.660576] videobuf2_common: Unknown symbol media_request_put (err -2)
[32092.660667] videobuf2_common: Unknown symbol media_request_object_bind (err -2)
[32092.695074] mc: Linux media interface: v0.10
[32092.744147] videodev: Linux video capture interface: v2.00
[32092.795446] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32092.804376] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32092.804382] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32092.804388] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32092.804672] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input28
[32092.805030] usbcore: registered new interface driver uvcvideo
[32092.805032] USB Video Class driver (1.1.1)
[32618.172503] usb 1-2: USB disconnect, device number 20
[32619.968449] usb 1-2: new high-speed USB device number 22 using ehci-pci
[32620.140448] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32620.140771] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32620.141472] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32620.145404] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32620.145780] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32620.145788] uvcvideo: Failed to initialize the device (-5).
[32621.225591] usbcore: deregistering interface driver uvcvideo
[32621.384587] mc: Linux media interface: v0.10
[32621.430686] videodev: Linux video capture interface: v2.00
[32621.481221] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32621.487076] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32621.487083] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32621.487088] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32621.487371] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input29
[32621.487740] usbcore: registered new interface driver uvcvideo
[32621.487742] USB Video Class driver (1.1.1)
[32621.740049] usbcore: deregistering interface driver uvcvideo
[32621.798482] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[32621.798566] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[32621.798582] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[32621.798596] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[32621.798618] uvcvideo: Unknown symbol vb2_poll (err -2)
[32621.798651] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[32621.798676] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[32621.798696] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[32621.798727] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[32621.798770] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[32621.798790] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[32621.798804] uvcvideo: Unknown symbol vb2_streamon (err -2)
[32621.798838] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[32621.798844] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[32621.798855] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[32621.798862] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[32621.798869] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[32621.798957] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[32621.798965] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[32621.799036] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[32621.799062] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[32621.799069] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[32621.799077] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[32621.799137] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[32621.991266] mc: Linux media interface: v0.10
[32622.029340] videodev: Linux video capture interface: v2.00
[32622.094563] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32622.103700] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32622.103707] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32622.103713] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32622.108804] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input30
[32622.109926] usbcore: registered new interface driver uvcvideo
[32622.109929] USB Video Class driver (1.1.1)
[33022.800395]  sdb:
[33023.166724]  sdb: sdb1
[33047.327866] usb 2-3: USB disconnect, device number 14
[33050.344399] usb 2-3: new high-speed USB device number 15 using ehci-pci
[33050.692398] usb 2-3: device descriptor read/64, error -71
[33050.960166] usb 2-3: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[33050.960172] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33050.960177] usb 2-3: Product: DataTraveler 2.0
[33050.960182] usb 2-3: Manufacturer: Kingston
[33050.960187] usb 2-3: SerialNumber: 50E549550FA9D
[33050.961777] usb-storage 2-3:1.0: USB Mass Storage device detected
[33050.962366] scsi host5: usb-storage 2-3:1.0
[33051.986370] usb 2-3: USB disconnect, device number 15
[33052.284394] usb 2-3: new high-speed USB device number 16 using ehci-pci
[33052.636388] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[33053.010480] usb 6-1: not running at top speed; connect to a high speed hub
[33053.042463] usb 6-1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[33053.042469] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33053.042474] usb 6-1: Product: DataTraveler 2.0
[33053.042479] usb 6-1: Manufacturer: Kingston
[33053.042484] usb 6-1: SerialNumber: 50E549550FA9D
[33053.046576] usb-storage 6-1:1.0: USB Mass Storage device detected
[33053.050686] scsi host5: usb-storage 6-1:1.0
[33054.208473] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
[33054.344489] usb 6-1: device descriptor read/64, error -71
[33055.224783] usb 6-1: USB disconnect, device number 2
[33060.572463] PM: suspend_common(): ehci_suspend+0x0/0xf0 returns -16
[33062.576417] usb 2-3: new high-speed USB device number 18 using ehci-pci
[33062.924404] usb 2-3: device descriptor read/64, error -71
[33063.384405] usb 2-3: device descriptor read/64, error -71
[33064.728509] usb 2-3: new high-speed USB device number 19 using ehci-pci
[33102.336440] usb 6-1: new full-speed USB device number 3 using uhci_hcd
[33102.472435] usb 6-1: device descriptor read/64, error -71
[33102.716432] usb 6-1: device descriptor read/64, error -71
[33102.952430] usb 6-1: new full-speed USB device number 4 using uhci_hcd
[33103.296431] usb 6-1: device descriptor read/64, error -71
[33103.540430] usb 6-1: device descriptor read/64, error -71
[33103.648463] usb usb6-port1: attempt power cycle
[33103.648484] usb usb6-port1: failed to disable port power
[33103.776431] usb 6-1: new full-speed USB device number 5 using uhci_hcd
[33104.192433] usb 6-1: device not accepting address 5, error -71
[33104.320438] usb 6-1: new full-speed USB device number 6 using uhci_hcd
[33104.736434] usb 6-1: device not accepting address 6, error -71
[33104.736479] usb usb6-port1: unable to enumerate USB device
[33113.016429] usb 6-1: new full-speed USB device number 7 using uhci_hcd
[33113.182539] usb 6-1: not running at top speed; connect to a high speed hub
[33113.214536] usb 6-1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[33113.214543] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33113.214548] usb 6-1: Product: DataTraveler 2.0
[33113.214553] usb 6-1: Manufacturer: Kingston
[33113.214557] usb 6-1: SerialNumber: 50E5495130FA9D
[33113.217674] usb-storage 6-1:1.0: USB Mass Storage device detected
[33113.218312] scsi host5: usb-storage 6-1:1.0
[33114.258589] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[33114.259430] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33114.263551] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[33114.266542] sd 5:0:0:0: [sdb] Write Protect is off
[33114.266549] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[33114.269544] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[33114.313580]  sdb: sdb1
[33114.324552] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33129.804607] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[33129.804618] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 0a 08 00 00 f0 00
[33129.804623] print_req_error: 1 callbacks suppressed
[33129.804630] blk_update_request: I/O error, dev sdb, sector 2568 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
[33129.804731] usb 6-1: USB disconnect, device number 7
[33129.805035] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[33129.805043] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 0a f8 00 00 10 00
[33129.805050] blk_update_request: I/O error, dev sdb, sector 2808 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[33129.805179] blk_update_request: I/O error, dev sdb, sector 2568 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[33129.805191] Buffer I/O error on dev sdb1, logical block 65, async page read
[33146.620435] usb 2-3: new high-speed USB device number 22 using ehci-pci
[33146.778548] usb 2-3: New USB device found, idVendor=1221, idProduct=3234, bcdDevice= 0.00
[33146.778554] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33146.778559] usb 2-3: Product: Flash Disk
[33146.778564] usb 2-3: Manufacturer: USB2.0
[33146.778569] usb 2-3: SerialNumber: A6X203E
[33146.779162] usb-storage 2-3:1.0: USB Mass Storage device detected
[33146.782861] scsi host5: usb-storage 2-3:1.0
[33147.809359] scsi 5:0:0:0: Direct-Access     USB2.0   Flash Disk       2.b0 PQ: 0 ANSI: 2
[33147.810231] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33147.810819] sd 5:0:0:0: [sdb] 8007680 512-byte logical blocks: (4.10 GB/3.82 GiB)
[33147.811556] sd 5:0:0:0: [sdb] Write Protect is off
[33147.811563] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[33147.812184] sd 5:0:0:0: [sdb] No Caching mode page found
[33147.812195] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[33147.828094]  sdb: sdb1
[33147.830939] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33199.288532] usb 1-2: reset high-speed USB device number 22 using ehci-pci
[33200.647595] usb 1-2: USB disconnect, device number 22
[33201.724391] usb 1-2: new high-speed USB device number 23 using ehci-pci
[33201.888476] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[33201.888484] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33201.889232] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33201.891911] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[33201.892451] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[33201.892462] uvcvideo: Failed to initialize the device (-5).
[33201.906478] usb 1-2: USB disconnect, device number 23
[33202.320439] usb 1-2: new high-speed USB device number 24 using ehci-pci
[33202.480311] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[33202.480318] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33202.481597] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33202.482905] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[33202.483285] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[33202.483293] uvcvideo: Failed to initialize the device (-5).
[33203.413461] usbcore: deregistering interface driver uvcvideo
[33203.538805] mc: Linux media interface: v0.10
[33203.565467] videodev: Linux video capture interface: v2.00
[33203.614500] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33203.618346] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33203.618353] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33203.618358] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33203.618605] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input31
[33203.619000] usbcore: registered new interface driver uvcvideo
[33203.619003] USB Video Class driver (1.1.1)
[33203.861982] usbcore: deregistering interface driver uvcvideo
[33203.964924] videobuf2_vmalloc: Unknown symbol vb2_common_vm_ops (err -2)
[33203.965039] videobuf2_vmalloc: Unknown symbol vb2_create_framevec (err -2)
[33203.965126] videobuf2_vmalloc: Unknown symbol vb2_destroy_framevec (err -2)
[33204.007906] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33204.011153] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33204.011159] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33204.011165] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33204.012015] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input32
[33204.016129] usbcore: registered new interface driver uvcvideo
[33204.016132] USB Video Class driver (1.1.1)
[33204.924224] usbcore: deregistering interface driver uvcvideo
[33205.160254] mc: Linux media interface: v0.10
[33205.197415] videodev: Linux video capture interface: v2.00
[33205.255506] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33205.259684] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33205.259691] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33205.259696] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33205.263773] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input33
[33205.265063] usbcore: registered new interface driver uvcvideo
[33205.265065] USB Video Class driver (1.1.1)
[33205.477293] usbcore: deregistering interface driver uvcvideo
[33205.560633] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[33205.607295] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33205.612715] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33205.612722] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33205.612727] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33205.612977] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input34
[33205.613530] usbcore: registered new interface driver uvcvideo
[33205.613532] USB Video Class driver (1.1.1)
[33291.492569] usb 2-3: USB disconnect, device number 22
[33294.908419] usb 2-3: new high-speed USB device number 23 using ehci-pci
[33295.066805] usb 2-3: New USB device found, idVendor=1221, idProduct=3234, bcdDevice= 0.00
[33295.066812] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33295.066817] usb 2-3: Product: Flash Disk
[33295.066822] usb 2-3: Manufacturer: USB2.0
[33295.066827] usb 2-3: SerialNumber: A63E
[33295.069813] usb-storage 2-3:1.0: USB Mass Storage device detected
[33295.084534] scsi host5: usb-storage 2-3:1.0
[33296.097388] scsi 5:0:0:0: Direct-Access     USB2.0   Flash Disk       2.b0 PQ: 0 ANSI: 2
[33296.098336] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33296.099712] sd 5:0:0:0: [sdb] 8007680 512-byte logical blocks: (4.10 GB/3.82 GiB)
[33296.100457] sd 5:0:0:0: [sdb] Write Protect is off
[33296.100468] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[33296.101192] sd 5:0:0:0: [sdb] No Caching mode page found
[33296.101203] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[33296.126484]  sdb: sdb1
[33296.129639] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33337.775706] usb 2-3: USB disconnect, device number 23
[33351.304440] usb 2-3: new high-speed USB device number 24 using ehci-pci
[33351.483187] usb 2-3: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[33351.483194] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33351.483199] usb 2-3: Product: USB Flash Disk
[33351.483204] usb 2-3: Manufacturer: General
[33351.483208] usb 2-3: SerialNumber: 041040
[33351.483789] usb-storage 2-3:1.0: USB Mass Storage device detected
[33351.489544] usb-storage 2-3:1.0: Quirks match for vid 090c pid 1000: 400
[33351.489669] scsi host5: usb-storage 2-3:1.0
[33352.718782] scsi 5:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 0 CCS
[33352.719755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33352.721078] sd 5:0:0:0: [sdb] 3932160 512-byte logical blocks: (2.01 GB/1.88 GiB)
[33352.721953] sd 5:0:0:0: [sdb] Write Protect is off
[33352.721960] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[33352.722827] sd 5:0:0:0: [sdb] No Caching mode page found
[33352.722838] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[33352.745740]  sdb: sdb1
[33352.749341] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33895.386488] usb 2-3: USB disconnect, device number 24
[33904.432442] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[34264.152427] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[34952.000464] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[34966.405510] audit: type=1400 audit(1598186377.877:27): apparmor="ALLOWED" operation="file_mmap" profile="libreoffice-soffice" name="/tmp/.glrWhKkF" pid=27461 comm="soffice.bin" requested_mask="m" denied_mask="m" fsuid=1000 ouid=1000
[37492.140478] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[37492.482131] usb 1-2: USB disconnect, device number 24
[37492.792452] usb 1-2: new high-speed USB device number 25 using ehci-pci
[37492.952404] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[37492.952411] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[37492.954747] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[37492.956008] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[37492.956471] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[37492.956479] uvcvideo: Failed to initialize the device (-5).
[37494.045810] usbcore: deregistering interface driver uvcvideo
[37494.181003] mc: Linux media interface: v0.10
[37494.207222] videodev: Linux video capture interface: v2.00
[37494.239420] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[37494.243355] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[37494.243362] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[37494.243367] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[37494.243700] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input35
[37494.244066] usbcore: registered new interface driver uvcvideo
[37494.244068] USB Video Class driver (1.1.1)
[37494.539721] usbcore: deregistering interface driver uvcvideo
[37494.648743] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[37494.648819] uvcvideo: Unknown symbol v4l2_fh_exit (err -2)
[37494.648914] uvcvideo: Unknown symbol video_ioctl2 (err -2)
[37494.648929] uvcvideo: Unknown symbol media_device_unregister (err -2)
[37494.649008] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[37494.649081] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[37494.649146] uvcvideo: Unknown symbol v4l2_format_info (err -2)
[37494.649210] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[37494.681248] uvcvideo: Unknown symbol media_device_init (err -2)
[37494.681321] uvcvideo: Unknown symbol vb2_poll (err -2)
[37494.681401] uvcvideo: Unknown symbol v4l2_fh_del (err -2)
[37494.681466] uvcvideo: Unknown symbol v4l2_fh_add (err -2)
[37494.681530] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[37494.681618] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[37494.681699] uvcvideo: Unknown symbol __media_device_register (err -2)
[37494.681763] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[37494.681827] uvcvideo: Unknown symbol v4l2_subdev_init (err -2)
[37494.681891] uvcvideo: Unknown symbol v4l2_fh_open (err -2)
[37494.681970] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[37494.682037] uvcvideo: Unknown symbol media_create_pad_link (err -2)
[37494.682101] uvcvideo: Unknown symbol v4l2_device_register_subdev (err -2)
[37494.682192] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[37494.682265] uvcvideo: Unknown symbol video_devdata (err -2)
[37494.682329] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[37494.682401] uvcvideo: Unknown symbol vb2_streamon (err -2)
[37494.682465] uvcvideo: Unknown symbol v4l2_ctrl_replace (err -2)
[37494.682533] uvcvideo: Unknown symbol v4l2_type_names (err -2)
[37494.682600] uvcvideo: Unknown symbol media_device_cleanup (err -2)
[37494.682668] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[37494.682733] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[37494.682800] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[37494.682865] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[37494.682928] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[37494.683017] uvcvideo: Unknown symbol vb2_buffer_done (err -2)
[37494.683080] uvcvideo: Unknown symbol vb2_plane_vaddr (err -2)
[37494.683145] uvcvideo: Unknown symbol v4l2_fh_init (err -2)
[37494.683215] uvcvideo: Unknown symbol media_entity_pads_init (err -2)
[37494.683280] uvcvideo: Unknown symbol video_unregister_device (err -2)
[37494.683344] uvcvideo: Unknown symbol v4l2_prio_init (err -2)
[37494.683415] uvcvideo: Unknown symbol v4l2_event_subscribe (err -2)
[37494.683486] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[37494.683549] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[37494.683620] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[37494.683696] uvcvideo: Unknown symbol v4l2_device_register (err -2)
[37494.683777] uvcvideo: Unknown symbol v4l2_ctrl_merge (err -2)
[37494.683862] uvcvideo: Unknown symbol __video_register_device (err -2)
[37494.683927] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[37494.684011] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[37494.684076] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[37494.684139] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[37494.684207] uvcvideo: Unknown symbol v4l2_device_unregister (err -2)
[37494.684275] uvcvideo: Unknown symbol vb2_mmap (err -2)
[37494.684399] uvcvideo: Unknown symbol v4l2_event_queue_fh (err -2)
[37494.704689] uvcvideo: Unknown symbol v4l2_event_unsubscribe (err -2)
[37494.704763] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[37494.731499] mc: Linux media interface: v0.10
[37494.759112] videodev: Linux video capture interface: v2.00
[37494.795891] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[37494.799187] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[37494.799194] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[37494.799200] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[37494.799444] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input36
[37494.799775] usbcore: registered new interface driver uvcvideo
[37494.799778] USB Video Class driver (1.1.1)
[37691.490927] audit: type=1400 audit(1598189102.960:28): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[37691.491003] audit: type=1400 audit(1598189102.960:29): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37691.491015] audit: type=1400 audit(1598189102.960:30): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37691.491108] audit: type=1400 audit(1598189102.960:31): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37691.491119] audit: type=1400 audit(1598189102.960:32): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37691.549563] audit: type=1400 audit(1598189103.020:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/moi/.local/share/gvfs-metadata/smb-share:server=freenas.local,share=nous" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37691.550323] audit: type=1400 audit(1598189103.020:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/moi/.local/share/gvfs-metadata/smb-share:server=freenas.local,share=nous-6bc4b2b8.log" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37712.785435] audit: type=1400 audit(1598189124.256:35): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[37712.803314] audit: type=1400 audit(1598189124.272:36): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[37748.699624] audit: type=1400 audit(1598189160.169:37): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[37748.708435] audit: type=1400 audit(1598189160.181:38): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37748.708448] audit: type=1400 audit(1598189160.181:39): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37748.709133] audit: type=1400 audit(1598189160.181:40): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37748.709144] audit: type=1400 audit(1598189160.181:41): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37802.311032] audit: type=1400 audit(1598189213.781:42): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[37802.311709] audit: type=1400 audit(1598189213.781:43): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37802.311719] audit: type=1400 audit(1598189213.781:44): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37802.311830] audit: type=1400 audit(1598189213.781:45): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37802.311839] audit: type=1400 audit(1598189213.781:46): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[38154.772552] usb 1-2: USB disconnect, device number 25
[39667.669916] audit: type=1400 audit(1598191079.139:47): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[39667.669931] audit: type=1400 audit(1598191079.139:48): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[39667.669941] audit: type=1400 audit(1598191079.139:49): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[39667.671309] audit: type=1400 audit(1598191079.139:50): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[39667.671321] audit: type=1400 audit(1598191079.139:51): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[41018.832477] usb 1-2: new high-speed USB device number 26 using ehci-pci
[41019.000367] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[41019.000374] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[41019.004605] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41019.010955] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[41019.011331] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[41019.011338] uvcvideo: Failed to initialize the device (-5).
[41019.540401] usb 1-2: USB disconnect, device number 26
[41019.860475] usb 1-2: new high-speed USB device number 27 using ehci-pci
[41020.020383] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[41020.020389] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[41020.021014] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41020.022339] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[41020.022715] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[41020.022723] uvcvideo: Failed to initialize the device (-5).
[41020.453558] usbcore: deregistering interface driver uvcvideo
[41020.536707] videobuf2_v4l2: Unknown symbol vb2_buffer_in_use (err -2)
[41020.536777] videobuf2_v4l2: Unknown symbol vb2_core_queue_init (err -2)
[41020.536847] videobuf2_v4l2: Unknown symbol vb2_verify_memory_type (err -2)
[41020.536915] videobuf2_v4l2: Unknown symbol vb2_core_reqbufs (err -2)
[41020.536986] videobuf2_v4l2: Unknown symbol vb2_core_expbuf (err -2)
[41020.537054] videobuf2_v4l2: Unknown symbol vb2_core_create_bufs (err -2)
[41020.537138] videobuf2_v4l2: Unknown symbol video_devdata (err -2)
[41020.548575] videobuf2_v4l2: Unknown symbol media_request_get_by_fd (err -2)
[41020.548646] videobuf2_v4l2: Unknown symbol vb2_write (err -2)
[41020.548714] videobuf2_v4l2: Unknown symbol vb2_request_buffer_cnt (err -2)
[41020.548781] videobuf2_v4l2: Unknown symbol vb2_core_queue_release (err -2)
[41020.548850] videobuf2_v4l2: Unknown symbol media_request_put (err -2)
[41020.564585] videobuf2_v4l2: Unknown symbol v4l2_fh_release (err -2)
[41020.564657] videobuf2_v4l2: Unknown symbol v4l2_event_pending (err -2)
[41020.564734] videobuf2_v4l2: Unknown symbol vb2_core_prepare_buf (err -2)
[41020.564800] videobuf2_v4l2: Unknown symbol vb2_read (err -2)
[41020.564867] videobuf2_v4l2: Unknown symbol vb2_core_poll (err -2)
[41020.564934] videobuf2_v4l2: Unknown symbol vb2_core_streamon (err -2)
[41020.565002] videobuf2_v4l2: Unknown symbol vb2_core_querybuf (err -2)
[41020.565069] videobuf2_v4l2: Unknown symbol vb2_core_qbuf (err -2)
[41020.565135] videobuf2_v4l2: Unknown symbol vb2_mmap (err -2)
[41020.565201] videobuf2_v4l2: Unknown symbol vb2_core_dqbuf (err -2)
[41020.565272] videobuf2_v4l2: Unknown symbol vb2_core_streamoff (err -2)
[41020.593721] mc: Linux media interface: v0.10
[41020.623748] videodev: Linux video capture interface: v2.00
[41020.660296] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41020.665244] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[41020.665250] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[41020.665256] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[41020.665918] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input37
[41020.666284] usbcore: registered new interface driver uvcvideo
[41020.666287] USB Video Class driver (1.1.1)
[41021.715346] usbcore: deregistering interface driver uvcvideo
[41021.892947] mc: Linux media interface: v0.10
[41021.919283] videodev: Linux video capture interface: v2.00
[41021.953198] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41021.958756] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[41021.958763] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[41021.958769] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[41021.959051] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input38
[41021.959415] usbcore: registered new interface driver uvcvideo
[41021.959417] USB Video Class driver (1.1.1)
[41022.239651] usbcore: deregistering interface driver uvcvideo
[41022.309445] videobuf2_v4l2: Unknown symbol vb2_buffer_in_use (err -2)
[41022.309578] videobuf2_v4l2: Unknown symbol vb2_core_queue_init (err -2)
[41022.324613] videobuf2_v4l2: Unknown symbol vb2_verify_memory_type (err -2)
[41022.324685] videobuf2_v4l2: Unknown symbol vb2_core_reqbufs (err -2)
[41022.324757] videobuf2_v4l2: Unknown symbol vb2_core_expbuf (err -2)
[41022.324828] videobuf2_v4l2: Unknown symbol vb2_core_create_bufs (err -2)
[41022.324853] videobuf2_v4l2: Unknown symbol video_devdata (err -2)
[41022.324938] videobuf2_v4l2: Unknown symbol vb2_write (err -2)
[41022.325010] videobuf2_v4l2: Unknown symbol vb2_request_buffer_cnt (err -2)
[41022.325082] videobuf2_v4l2: Unknown symbol vb2_core_queue_release (err -2)
[41022.325100] videobuf2_v4l2: Unknown symbol v4l2_fh_release (err -2)
[41022.325111] videobuf2_v4l2: Unknown symbol v4l2_event_pending (err -2)
[41022.325189] videobuf2_v4l2: Unknown symbol vb2_core_prepare_buf (err -2)
[41022.344608] videobuf2_v4l2: Unknown symbol vb2_read (err -2)
[41022.344679] videobuf2_v4l2: Unknown symbol vb2_core_poll (err -2)
[41022.344749] videobuf2_v4l2: Unknown symbol vb2_core_streamon (err -2)
[41022.344822] videobuf2_v4l2: Unknown symbol vb2_core_querybuf (err -2)
[41022.344894] videobuf2_v4l2: Unknown symbol vb2_core_qbuf (err -2)
[41022.344963] videobuf2_v4l2: Unknown symbol vb2_mmap (err -2)
[41022.345032] videobuf2_v4l2: Unknown symbol vb2_core_dqbuf (err -2)
[41022.360578] videobuf2_v4l2: Unknown symbol vb2_core_streamoff (err -2)
[41022.433946] videodev: Linux video capture interface: v2.00
[41022.466270] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41022.470882] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[41022.470889] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[41022.470894] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[41022.471170] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input39
[41022.471528] usbcore: registered new interface driver uvcvideo
[41022.471530] USB Video Class driver (1.1.1)
[41307.060463] usb 1-2: reset high-speed USB device number 27 using ehci-pci
[41310.036563] usb 1-2: USB disconnect, device number 27
[48186.272388] usb 2-1: new high-speed USB device number 25 using ehci-pci
[48186.430647] usb 2-1: New USB device found, idVendor=04a9, idProduct=10e4, bcdDevice= 1.01
[48186.430654] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[48186.430660] usb 2-1: Product: iP2800 series
[48186.430664] usb 2-1: Manufacturer: Canon
[48186.430669] usb 2-1: SerialNumber: 936
[48187.812583] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48187.812691] usbcore: registered new interface driver usblp
[48193.541266] usblp0: removed
[48193.547681] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48193.571506] usblp0: removed
[48193.581197] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48198.747686] usblp0: removed
[48198.751277] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48244.249617] audit: type=1400 audit(1598199655.719:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=33765 comm="cups-browsed" capability=23  capname="sys_nice"
[48349.038878] usb 2-1: USB disconnect, device number 25
[48349.039331] usblp0: removed
[53338.660388] usb 1-2: new high-speed USB device number 28 using ehci-pci
[53339.212480] usb 1-2: device not accepting address 28, error -71
[53339.548501] usb 1-2: new high-speed USB device number 29 using ehci-pci
[53339.712379] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[53339.712386] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[53339.713150] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[53339.714457] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[53339.714834] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[53339.714842] uvcvideo: Failed to initialize the device (-5).
[53340.758441] usbcore: deregistering interface driver uvcvideo
[53340.920144] mc: Linux media interface: v0.10
[53341.029007] videodev: Linux video capture interface: v2.00
[53341.174317] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[53341.181147] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[53341.181154] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[53341.181159] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[53341.181968] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input40
[53341.206549] usbcore: registered new interface driver uvcvideo
[53341.206553] USB Video Class driver (1.1.1)
[53341.671168] usbcore: deregistering interface driver uvcvideo
[53341.783774] videobuf2_common: Unknown symbol v4l_vb2q_enable_media_source (err -2)
[53341.920164] mc: Linux media interface: v0.10
[53342.031912] videodev: Linux video capture interface: v2.00
[53342.123836] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[53342.146412] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[53342.146420] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[53342.146425] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[53342.147278] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input41
[53342.148830] usbcore: registered new interface driver uvcvideo
[53342.148834] USB Video Class driver (1.1.1)
Je précise que je l'ai lancé dès que j'ai pu le faire, donc ça devait être en fin de bug.
Linux Mint 19.3 Cinnamon - Sony vaio fz - nvidia 8600m gs - 4Go de ram - intel core T9500

Laurent0718
Messages : 147
Enregistré le : mar. 10 juil. 2018 17:36

Re: Sortie de veille difficile

Message par Laurent0718 »

Bonjour,

Je me permets de revenir vers vous.
Avez-vous pu voir s'il y avait quelque chose qui n'allait pas.
Le problème n'est pas survenu depuis.
crdlt
Linux Mint 19.3 Cinnamon - Sony vaio fz - nvidia 8600m gs - 4Go de ram - intel core T9500

Avatar du membre
cyrille
Administrateur du site
Messages : 12285
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Sortie de veille difficile

Message par cyrille »

Dans le dmesg sus cité, rien d'anormal
Le problème n'est pas survenu depuis.
une mise à jour a peut être réglé ton soucis...
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Laurent0718
Messages : 147
Enregistré le : mar. 10 juil. 2018 17:36

Re: Sortie de veille difficile

Message par Laurent0718 »

Ok merci bien

Je reviens vers vous si le problème survient de nouveau.
Linux Mint 19.3 Cinnamon - Sony vaio fz - nvidia 8600m gs - 4Go de ram - intel core T9500

Répondre