Re: Périphériques USB3 non reconnus lors du branchement à chaud mais reconnus si présent pendant le boot.
Posté : mar. 22 mai 2018 20:14
Dernier message de la page précédente :
Voici le retour de la commande "dmseg" sans tentative de connexion d'un DD à chaudKalix1 a écrit :Dois-je également publier le retour de "dmesg" après boot et sans DD connecté à chaud sur ports à problèmes ?
Code : Tout sélectionner
xxx@LMC-18N ~ $ sudo dmesg
[sudo] Mot de passe de xxx :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=9f27cb2c-c17b-407d-a4da-acfb40a55ec7 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cc1f8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cc1f9000-0x00000000cc7d2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cc7d3000-0x00000000cc7e2fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cc7e3000-0x00000000cc90efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cc90f000-0x00000000cd7dbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cd7dc000-0x00000000cd7dcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd7dd000-0x00000000cd81ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cd820000-0x00000000cdc52fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cdc53000-0x00000000cdff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LE PLUS, BIOS 0910 03/18/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 5, base: 16894MB, range: 2MB, type UC
[ 0.000000] total RAM covered: 16110M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
[ 0.000000] reg 3, base: 3312MB, range: 16MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16894MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [ffff8800000fd8e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] BRK [0x021fe000, 0x021fefff] PGTABLE
[ 0.000000] BRK [0x021ff000, 0x021fffff] PGTABLE
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x333f8000-0x359f3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CC7D6078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CC7E1108 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CC7D6180 00AF84 (v02 ALASKA A M I 00000022 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CC90D080 000040
[ 0.000000] ACPI: APIC 0x00000000CC7E1218 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CC7E12B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CC7E12F8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CC7E1338 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CC7E1370 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000CC7E2B80 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CC7E1738 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CC7E20E8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fde8000-0x41fdecfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cc1f8fff]
[ 0.000000] node 0: [mem 0x00000000cd7dc000-0x00000000cd7dcfff]
[ 0.000000] node 0: [mem 0x00000000cd820000-0x00000000cdc52fff]
[ 0.000000] node 0: [mem 0x00000000cdff4000-0x00000000cdffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4112852
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13009 pages used for memmap
[ 0.000000] DMA32 zone: 832568 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc1f9000-0xcc7d2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc7d3000-0xcc7e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc7e3000-0xcc90efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcc90f000-0xcd7dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcd7dd000-0xcd81ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcdc53000-0xcdff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048566
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=9f27cb2c-c17b-407d-a4da-acfb40a55ec7 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16068476K/16451408K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 382932K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3606.081 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 7212.16 BogoMIPS (lpj=14424324)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20150930
[ 0.004448] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.004463] Security Framework initialized
[ 0.004464] Yama: becoming mindful.
[ 0.004475] AppArmor: AppArmor initialized
[ 0.005104] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007811] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009034] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009045] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009232] Initializing cgroup subsys io
[ 0.009235] Initializing cgroup subsys memory
[ 0.009239] Initializing cgroup subsys devices
[ 0.009241] Initializing cgroup subsys freezer
[ 0.009242] Initializing cgroup subsys net_cls
[ 0.009244] Initializing cgroup subsys perf_event
[ 0.009245] Initializing cgroup subsys net_prio
[ 0.009246] Initializing cgroup subsys hugetlb
[ 0.009248] Initializing cgroup subsys pids
[ 0.009264] CPU: Physical Processor ID: 0
[ 0.009265] CPU: Processor Core ID: 0
[ 0.009269] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009269] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009515] mce: CPU supports 9 MCE banks
[ 0.009524] CPU0: Thermal monitoring enabled (TM1)
[ 0.009529] process: using mwait in idle threads
[ 0.009531] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009532] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009834] Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000)
[ 0.077682] ftrace: allocating 31878 entries in 125 pages
[ 0.087930] smpboot: Max logical packages: 2
[ 0.087932] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.088318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128003] TSC deadline timer enabled
[ 0.128005] smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.128015] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.128029] ... version: 3
[ 0.128030] ... bit width: 48
[ 0.128030] ... generic registers: 4
[ 0.128031] ... value mask: 0000ffffffffffff
[ 0.128031] ... max period: 0000ffffffffffff
[ 0.128032] ... fixed-purpose events: 3
[ 0.128032] ... event mask: 000000070000000f
[ 0.128564] x86: Booting SMP configuration:
[ 0.128565] .... node #0, CPUs: #1
[ 0.131380] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.131440] #2 #3 #4 #5 #6 #7
[ 0.147526] x86: Booted up 1 node, 8 CPUs
[ 0.147529] smpboot: Total of 8 processors activated (57697.29 BogoMIPS)
[ 0.153685] devtmpfs: initialized
[ 0.156054] evm: security.selinux
[ 0.156055] evm: security.SMACK64
[ 0.156056] evm: security.SMACK64EXEC
[ 0.156056] evm: security.SMACK64TRANSMUTE
[ 0.156057] evm: security.SMACK64MMAP
[ 0.156058] evm: security.ima
[ 0.156058] evm: security.capability
[ 0.156103] PM: Registering ACPI NVS region [mem 0xcc7e3000-0xcc90efff] (1228800 bytes)
[ 0.156113] PM: Registering ACPI NVS region [mem 0xcd7dd000-0xcd81ffff] (274432 bytes)
[ 0.156172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.156227] pinctrl core: initialized pinctrl subsystem
[ 0.156309] RTC time: 17:45:54, date: 05/22/18
[ 0.156387] NET: Registered protocol family 16
[ 0.165536] cpuidle: using governor ladder
[ 0.175326] cpuidle: using governor menu
[ 0.175331] PCCT header not found.
[ 0.175381] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.175383] ACPI: bus type PCI registered
[ 0.175384] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.175438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.175440] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.175447] PCI: Using configuration type 1 for base access
[ 0.175470] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.189767] ACPI: Added _OSI(Module Device)
[ 0.189769] ACPI: Added _OSI(Processor Device)
[ 0.189769] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.189770] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.191352] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.192971] ACPI: Dynamic OEM Table Load:
[ 0.192976] ACPI: SSDT 0xFFFF88040D7A6000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.193299] ACPI: Dynamic OEM Table Load:
[ 0.193301] ACPI: SSDT 0xFFFF88040D7AC000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.193585] ACPI: Dynamic OEM Table Load:
[ 0.193587] ACPI: SSDT 0xFFFF88040D78EC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.194525] ACPI : EC: EC started
[ 0.194528] ACPI: Interpreter enabled
[ 0.194532] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.194535] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.194544] ACPI: (supports S0 S3 S4 S5)
[ 0.194544] ACPI: Using IOAPIC for interrupt routing
[ 0.194560] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.198291] ACPI: Power Resource [FN00] (off)
[ 0.198342] ACPI: Power Resource [FN01] (off)
[ 0.198391] ACPI: Power Resource [FN02] (off)
[ 0.198442] ACPI: Power Resource [FN03] (off)
[ 0.198490] ACPI: Power Resource [FN04] (off)
[ 0.198853] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.198856] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.198956] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.199035] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.199036] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.199280] PCI host bridge to bus 0000:00
[ 0.199282] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.199283] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.199284] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.199285] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.199287] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.199288] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.199289] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.199290] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.199291] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.199292] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.199293] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.199298] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.199358] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.199381] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.199406] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.199432] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.199441] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.199445] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.199448] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.199524] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.199551] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.199605] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.199631] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.199658] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.199686] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a00f 64bit]
[ 0.199742] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.199799] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.199824] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c18000-0xf7c183ff]
[ 0.199890] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.199926] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.199952] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.199975] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.200030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.200060] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.200086] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.200154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.200184] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.200210] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.200277] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.200307] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.200333] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.200400] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.200430] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.200455] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.200523] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.200552] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.200577] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[ 0.200645] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.200674] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.200699] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[ 0.200767] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.200796] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.200821] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[ 0.200888] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.200918] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.200943] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.200969] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c17000-0xf7c173ff]
[ 0.201034] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.201069] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.201096] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.201234] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.201254] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.201260] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.201267] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.201273] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.201279] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.201285] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c16000-0xf7c167ff]
[ 0.201312] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.201359] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.201373] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c15000-0xf7c150ff 64bit]
[ 0.201391] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.201466] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.201507] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.201582] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[ 0.201619] pci 0000:03:00.0: reg 0x10: [io 0xe050-0xe057]
[ 0.201631] pci 0000:03:00.0: reg 0x14: [io 0xe040-0xe043]
[ 0.201643] pci 0000:03:00.0: reg 0x18: [io 0xe030-0xe037]
[ 0.201655] pci 0000:03:00.0: reg 0x1c: [io 0xe020-0xe023]
[ 0.201668] pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe01f]
[ 0.201680] pci 0000:03:00.0: reg 0x24: [mem 0xf7b10000-0xf7b101ff]
[ 0.201692] pci 0000:03:00.0: reg 0x30: [mem 0xf7b00000-0xf7b0ffff pref]
[ 0.201772] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.209557] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.209560] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.209563] pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.209624] pci 0000:04:00.0: [1b73:1100] type 00 class 0x0c0330
[ 0.209673] pci 0000:04:00.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.209691] pci 0000:04:00.0: reg 0x18: [mem 0xf7a11000-0xf7a11fff 64bit]
[ 0.209710] pci 0000:04:00.0: reg 0x20: [mem 0xf7a10000-0xf7a10fff 64bit]
[ 0.209775] pci 0000:04:00.0: supports D1
[ 0.209776] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.209806] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.217558] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.217563] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.217625] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.217670] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.217702] pci 0000:05:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.217722] pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.217808] pci 0000:05:00.0: supports D1 D2
[ 0.217809] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217849] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.225562] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.225565] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.225572] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.225624] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[ 0.225746] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.225766] pci 0000:00:1c.5: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.225769] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.225776] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.225777] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.225778] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.225779] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.225780] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.225781] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.225782] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.225783] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.225784] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.225785] pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.225834] pci 0000:07:01.0: [11c1:0620] type 00 class 0x078000
[ 0.225874] pci 0000:07:01.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.226011] pci 0000:07:01.0: PME# supported from D3hot D3cold
[ 0.226107] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.226116] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.226128] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.226129] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.226130] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.226132] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.226133] pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.226134] pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.226135] pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.226136] pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.226137] pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.226138] pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.226139] pci 0000:06:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.226202] pci 0000:08:00.0: [1b4b:9120] type 00 class 0x010601
[ 0.226237] pci 0000:08:00.0: reg 0x10: [io 0xb090-0xb097]
[ 0.226248] pci 0000:08:00.0: reg 0x14: [io 0xb080-0xb083]
[ 0.226259] pci 0000:08:00.0: reg 0x18: [io 0xb070-0xb077]
[ 0.226270] pci 0000:08:00.0: reg 0x1c: [io 0xb060-0xb063]
[ 0.226282] pci 0000:08:00.0: reg 0x20: [io 0xb050-0xb05f]
[ 0.226293] pci 0000:08:00.0: reg 0x24: [mem 0xf7915000-0xf79157ff]
[ 0.226304] pci 0000:08:00.0: reg 0x30: [mem 0xf7900000-0xf790ffff pref]
[ 0.226352] pci 0000:08:00.0: PME# supported from D3hot
[ 0.226378] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.233562] pci 0000:00:1c.6: PCI bridge to [bus 08]
[ 0.233565] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
[ 0.233568] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.233631] pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.233682] pci 0000:09:00.0: reg 0x10: [mem 0xf7800000-0xf7807fff 64bit]
[ 0.233817] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 0.233843] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.241565] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.241570] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.241946] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.241979] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 10 11 12 14 15)
[ 0.242010] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[ 0.242041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
[ 0.242071] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.242102] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.242132] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.242163] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.242323] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.242334] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.242407] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.242408] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.242410] vgaarb: loaded
[ 0.242411] vgaarb: bridge control possible 0000:00:02.0
[ 0.242556] SCSI subsystem initialized
[ 0.242581] libata version 3.00 loaded.
[ 0.242597] ACPI: bus type USB registered
[ 0.242606] usbcore: registered new interface driver usbfs
[ 0.242612] usbcore: registered new interface driver hub
[ 0.242625] usbcore: registered new device driver usb
[ 0.242713] PCI: Using ACPI for IRQ routing
[ 0.243965] PCI: pci_cache_line_size set to 64 bytes
[ 0.244028] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.244029] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.244030] e820: reserve RAM buffer [mem 0xcc1f9000-0xcfffffff]
[ 0.244031] e820: reserve RAM buffer [mem 0xcd7dd000-0xcfffffff]
[ 0.244032] e820: reserve RAM buffer [mem 0xcdc53000-0xcfffffff]
[ 0.244033] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[ 0.244034] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.244107] NetLabel: Initializing
[ 0.244108] NetLabel: domain hash size = 128
[ 0.244108] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244116] NetLabel: unlabeled traffic allowed by default
[ 0.244161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.244164] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.246184] clocksource: Switched to clocksource hpet
[ 0.250053] AppArmor: AppArmor Filesystem Enabled
[ 0.250094] pnp: PnP ACPI init
[ 0.250157] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.250160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.250225] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.250227] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.250228] system 00:01: [io 0xffff] has been reserved
[ 0.250229] system 00:01: [io 0xffff] has been reserved
[ 0.250230] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.250231] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.250232] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.250234] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.250235] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250252] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.250283] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.250284] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.250338] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.250340] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250375] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.250377] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250511] pnp 00:06: [dma 0 disabled]
[ 0.250541] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.250668] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.250670] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.250671] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.250672] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.250673] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.250674] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.250676] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.250677] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.250678] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.250679] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.250681] system 00:07: [mem 0xdf200000-0xdf200fff] has been reserved
[ 0.250682] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250774] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.250775] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[ 0.250777] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.250789] pnp: PnP ACPI: found 9 devices
[ 0.256469] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.256532] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.256536] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.256546] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.256548] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.256552] pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.256559] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.256562] pci 0000:00:1c.3: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.256569] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.256571] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.256577] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.256582] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.256584] pci 0000:06:00.0: bridge window [io 0xc000-0xcfff]
[ 0.256603] pci 0000:00:1c.5: PCI bridge to [bus 06-07]
[ 0.256605] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.256614] pci 0000:00:1c.6: PCI bridge to [bus 08]
[ 0.256616] pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
[ 0.256620] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.256626] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.256630] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.256637] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.256638] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.256639] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.256641] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.256642] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.256643] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.256644] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.256645] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.256646] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.256647] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.256648] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.256649] pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.256650] pci_bus 0000:04: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.256651] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.256653] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.256654] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
[ 0.256655] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.256656] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.256657] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.256658] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.256659] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.256660] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.256661] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.256662] pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.256663] pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.256664] pci_bus 0000:06: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.256665] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.256666] pci_bus 0000:07: resource 4 [io 0xc000-0xcfff]
[ 0.256667] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7 window]
[ 0.256668] pci_bus 0000:07: resource 6 [io 0x0d00-0xffff window]
[ 0.256669] pci_bus 0000:07: resource 7 [mem 0x000a0000-0x000bffff window]
[ 0.256670] pci_bus 0000:07: resource 8 [mem 0x000d0000-0x000d3fff window]
[ 0.256671] pci_bus 0000:07: resource 9 [mem 0x000d4000-0x000d7fff window]
[ 0.256672] pci_bus 0000:07: resource 10 [mem 0x000d8000-0x000dbfff window]
[ 0.256673] pci_bus 0000:07: resource 11 [mem 0x000dc000-0x000dffff window]
[ 0.256674] pci_bus 0000:07: resource 12 [mem 0x000e0000-0x000e3fff window]
[ 0.256676] pci_bus 0000:07: resource 13 [mem 0x000e4000-0x000e7fff window]
[ 0.256677] pci_bus 0000:07: resource 14 [mem 0xdf200000-0xfeafffff window]
[ 0.256678] pci_bus 0000:08: resource 0 [io 0xb000-0xbfff]
[ 0.256679] pci_bus 0000:08: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.256680] pci_bus 0000:09: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.256701] NET: Registered protocol family 2
[ 0.256824] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.256977] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.257088] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.257110] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.257147] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.257202] NET: Registered protocol family 1
[ 0.257212] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.298197] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.298302] Trying to unpack rootfs image as initramfs...
[ 0.694718] Freeing initrd memory: 38896K (ffff8800333f8000 - ffff8800359f4000)
[ 0.694737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.694739] software IO TLB [mem 0xc81f9000-0xcc1f9000] (64MB) mapped at [ffff8800c81f9000-ffff8800cc1f8fff]
[ 0.694786] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.694787] hw unit of domain pp0-core 2^-16 Joules
[ 0.694788] hw unit of domain package 2^-16 Joules
[ 0.694789] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.694930] Scanning for low memory corruption every 60 seconds
[ 0.695172] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.695200] audit: initializing netlink subsys (disabled)
[ 0.695210] audit: type=2000 audit(1527011154.628:1): initialized
[ 0.695506] Initialise system trusted keyring
[ 0.695598] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.696495] zbud: loaded
[ 0.696625] VFS: Disk quotas dquot_6.6.0
[ 0.696645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.696928] fuse init (API version 7.23)
[ 0.697007] Key type big_key registered
[ 0.697247] Key type asymmetric registered
[ 0.697249] Asymmetric key parser 'x509' registered
[ 0.697271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.697300] io scheduler noop registered
[ 0.697302] io scheduler deadline registered (default)
[ 0.697321] io scheduler cfq registered
[ 0.697936] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.697940] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.697958] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.697958] vesafb: scrolling: redraw
[ 0.697960] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.697967] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
[ 0.698033] Console: switching to colour frame buffer device 240x67
[ 0.698051] fb0: VESA VGA frame buffer device
[ 0.698060] intel_idle: MWAIT substates: 0x1120
[ 0.698061] intel_idle: v0.4.1 model 0x3A
[ 0.698062] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.698285] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.698288] ACPI: Power Button [PWRB]
[ 0.698312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.698313] ACPI: Power Button [PWRF]
[ 0.698821] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.698822] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.698968] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.698969] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.698990] GHES: HEST is not enabled!
[ 0.699054] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.719458] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.720402] Linux agpgart interface v0.103
[ 0.722588] brd: module loaded
[ 0.723565] loop: module loaded
[ 0.723707] libphy: Fixed MDIO Bus: probed
[ 0.723710] tun: Universal TUN/TAP device driver, 1.6
[ 0.723710] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.723737] PPP generic driver version 2.4.2
[ 0.723773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.723776] ehci-pci: EHCI PCI platform driver
[ 0.723840] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.723844] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.723854] ehci-pci 0000:00:1a.0: debug port 2
[ 0.727750] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.727758] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c18000
[ 0.738135] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.738164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.738165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.738166] usb usb1: Product: EHCI Host Controller
[ 0.738167] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[ 0.738168] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.738265] hub 1-0:1.0: USB hub found
[ 0.738269] hub 1-0:1.0: 2 ports detected
[ 0.738394] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.738398] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.738406] ehci-pci 0000:00:1d.0: debug port 2
[ 0.742307] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.742310] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
[ 0.754143] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.754178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.754180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.754183] usb usb2: Product: EHCI Host Controller
[ 0.754185] usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[ 0.754187] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.754293] hub 2-0:1.0: USB hub found
[ 0.754297] hub 2-0:1.0: 2 ports detected
[ 0.754371] ehci-platform: EHCI generic platform driver
[ 0.754378] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.754384] ohci-pci: OHCI PCI platform driver
[ 0.754391] ohci-platform: OHCI generic platform driver
[ 0.754397] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.754461] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.754464] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.755532] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 0.755536] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.755624] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.755626] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755627] usb usb3: Product: xHCI Host Controller
[ 0.755628] usb usb3: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[ 0.755628] usb usb3: SerialNumber: 0000:00:14.0
[ 0.755720] hub 3-0:1.0: USB hub found
[ 0.755727] hub 3-0:1.0: 4 ports detected
[ 0.755938] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.755940] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.755959] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.755960] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755961] usb usb4: Product: xHCI Host Controller
[ 0.755961] usb usb4: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[ 0.755962] usb usb4: SerialNumber: 0000:00:14.0
[ 0.756051] hub 4-0:1.0: USB hub found
[ 0.756057] hub 4-0:1.0: 4 ports detected
[ 0.756290] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.756294] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[ 0.757614] xhci_hcd 0000:04:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x00000010
[ 0.757760] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.757761] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.757762] usb usb5: Product: xHCI Host Controller
[ 0.757763] usb usb5: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[ 0.757764] usb usb5: SerialNumber: 0000:04:00.0
[ 0.757850] hub 5-0:1.0: USB hub found
[ 0.757858] hub 5-0:1.0: 4 ports detected
[ 0.757930] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.757932] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[ 0.757942] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.757952] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.757953] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.757954] usb usb6: Product: xHCI Host Controller
[ 0.757955] usb usb6: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[ 0.757955] usb usb6: SerialNumber: 0000:04:00.0
[ 0.758013] hub 6-0:1.0: USB hub found
[ 0.758022] hub 6-0:1.0: 4 ports detected
[ 0.758139] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 0.758143] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 7
[ 0.821137] xhci_hcd 0000:09:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 0.821289] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.821290] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.821291] usb usb7: Product: xHCI Host Controller
[ 0.821292] usb usb7: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[ 0.821293] usb usb7: SerialNumber: 0000:09:00.0
[ 0.821380] hub 7-0:1.0: USB hub found
[ 0.821386] hub 7-0:1.0: 2 ports detected
[ 0.821438] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 0.821440] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 8
[ 0.821461] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.821470] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.821471] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.821472] usb usb8: Product: xHCI Host Controller
[ 0.821473] usb usb8: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
[ 0.821474] usb usb8: SerialNumber: 0000:09:00.0
[ 0.821546] hub 8-0:1.0: USB hub found
[ 0.821552] hub 8-0:1.0: 2 ports detected
[ 0.821625] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.823855] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.823858] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.823995] mousedev: PS/2 mouse device common for all mice
[ 0.824162] rtc_cmos 00:02: RTC can wake from S4
[ 0.824297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.824319] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.824324] i2c /dev entries driver
[ 0.824353] device-mapper: uevent: version 1.0.3
[ 0.824421] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.824430] Intel P-state driver initializing.
[ 0.824658] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.825127] NET: Registered protocol family 10
[ 0.825371] NET: Registered protocol family 17
[ 0.825385] Key type dns_resolver registered
[ 0.825735] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825770] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825782] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825795] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825807] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825841] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825848] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825857] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x17
[ 0.825900] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.826091] registered taskstats version 1
[ 0.826127] Loading compiled-in X.509 certificates
[ 0.827390] Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
[ 0.827416] zswap: loaded using pool lzo/zbud
[ 0.829935] Key type trusted registered
[ 0.833610] Key type encrypted registered
[ 0.833614] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.833616] ima: No TPM chip found, activating TPM-bypass!
[ 0.833640] evm: HMAC attrs: 0x1
[ 0.834301] Magic number: 2:686:795
[ 0.834428] rtc_cmos 00:02: setting system clock to 2018-05-22 17:45:55 UTC (1527011155)
[ 0.834527] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.834528] EDD information not available.
[ 0.834578] PM: Hibernation image not present or could not be loaded.
[ 0.835358] Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
[ 0.835359] Write protecting the kernel read-only data: 14336k
[ 0.835724] Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
[ 0.835971] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[ 0.846413] random: systemd-udevd urandom read with 5 bits of entropy available
[ 0.864269] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.864317] wmi: Mapper loaded
[ 0.871551] ahci 0000:00:1f.2: version 3.0
[ 0.872415] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.872421] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.873101] r8169 0000:05:00.0 eth0: RTL8168f/8111f at 0xffffc900018ae000, 10:bf:48:ba:f0:42, XID 08000800 IRQ 43
[ 0.873103] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.873480] [drm] Initialized drm 1.1.0 20060810
[ 0.886178] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.886182] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.888455] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 0.926819] scsi host0: ahci
[ 0.927022] scsi host1: ahci
[ 0.927231] scsi host2: ahci
[ 0.927410] scsi host3: ahci
[ 0.927511] scsi host4: ahci
[ 0.927580] scsi host5: ahci
[ 0.927605] ata1: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16100 irq 42
[ 0.927607] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 42
[ 0.927608] ata3: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16200 irq 42
[ 0.927610] ata4: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16280 irq 42
[ 0.927611] ata5: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16300 irq 42
[ 0.927613] ata6: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16380 irq 42
[ 0.927772] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[ 0.927814] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.927815] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 0.928009] scsi host6: ahci
[ 0.928090] scsi host7: ahci
[ 0.928116] ata7: SATA max UDMA/133 abar m512@0xf7b10000 port 0xf7b10100 irq 44
[ 0.928119] ata8: SATA max UDMA/133 abar m512@0xf7b10000 port 0xf7b10180 irq 44
[ 0.928274] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.928275] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.928399] [drm] Memory usable by graphics device = 2048M
[ 0.928401] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 0.928402] fb: switching to inteldrmfb from VESA VGA
[ 0.928419] Console: switching to colour dummy device 80x25
[ 0.928465] [drm] Replacing VGA console driver
[ 0.928476] scsi host8: ahci
[ 0.928588] scsi host9: ahci
[ 0.928616] ata9: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915100 irq 45
[ 0.928619] ata10: SATA max UDMA/133 abar m2048@0xf7915000 port 0xf7915180 irq 45
[ 0.934207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.934208] [drm] Driver supports precise vblank timestamp query.
[ 0.934646] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.939943] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.940076] acpi device:42: registered as cooling_device13
[ 0.940115] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.940168] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.966282] usb 6-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.050125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.066123] usb 5-3: new high-speed USB device number 2 using xhci_hcd
[ 1.066137] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.182881] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.182883] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.183164] hub 1-1:1.0: USB hub found
[ 1.183268] hub 1-1:1.0: 6 ports detected
[ 1.197015] usb 5-3: New USB device found, idVendor=2109, idProduct=2812
[ 1.197020] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.197022] usb 5-3: Product: USB2.0 Hub
[ 1.197024] usb 5-3: Manufacturer: VIA Labs, Inc.
[ 1.197615] hub 5-3:1.0: USB hub found
[ 1.197956] hub 5-3:1.0: 4 ports detected
[ 1.198496] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.198499] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.198751] hub 2-1:1.0: USB hub found
[ 1.198862] hub 2-1:1.0: 8 ports detected
[ 1.221478] usb 6-3: New USB device found, idVendor=2109, idProduct=0812
[ 1.221480] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.221482] usb 6-3: Product: USB3.0 Hub
[ 1.221483] usb 6-3: Manufacturer: VIA Labs, Inc.
[ 1.221977] hub 6-3:1.0: USB hub found
[ 1.222154] hub 6-3:1.0: 4 ports detected
[ 1.246134] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.246156] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.246158] ata9: SATA link down (SStatus 0 SControl 330)
[ 1.246179] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.246223] ata10: SATA link down (SStatus 0 SControl 330)
[ 1.246233] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.246238] fbcon: inteldrmfb (fb0) is primary device
[ 1.246252] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.246280] Console: switching to colour frame buffer device 240x67
[ 1.246298] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.246446] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.246450] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88040f4cc410), AE_NOT_FOUND (20150930/psparse-542)
[ 1.246583] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.246587] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4cc488), AE_NOT_FOUND (20150930/psparse-542)
[ 1.246795] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.246798] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88040f4cc398), AE_NOT_FOUND (20150930/psparse-542)
[ 1.246881] ata3.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 1.246883] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.246904] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 1.246940] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.246942] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133
[ 1.246943] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.246953] ata2.00: ATA-9: SanDisk SDSSDXPS960G, X212T0RL, max UDMA/133
[ 1.246954] ata2.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.247168] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.247173] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88040f4cc398), AE_NOT_FOUND (20150930/psparse-542)
[ 1.247259] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.247262] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040f4cc488), AE_NOT_FOUND (20150930/psparse-542)
[ 1.247291] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.247346] ata1.00: configured for UDMA/133
[ 1.247488] ata3.00: configured for UDMA/133
[ 1.247538] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 4B0Q PQ: 0 ANSI: 5
[ 1.247546] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.247548] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88040f4cc410), AE_NOT_FOUND (20150930/psparse-542)
[ 1.247573] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.247575] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4cc578), AE_NOT_FOUND (20150930/psparse-542)
[ 1.247578] ata5.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 1.247737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.247741] ata1.00: Enabling discard_zeroes_data
[ 1.247749] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.247798] sd 0:0:0:0: [sda] Write Protect is off
[ 1.247799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.247806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.247917] ata1.00: Enabling discard_zeroes_data
[ 1.248095] sda: sda1 sda2
[ 1.248192] ata1.00: Enabling discard_zeroes_data
[ 1.248221] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.248249] ata2.00: configured for UDMA/133
[ 1.248394] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDXPS T0RL PQ: 0 ANSI: 5
[ 1.248505] sd 1:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 1.248525] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.248529] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.248530] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.248538] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.248784] scsi 2:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[ 1.248839] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.248922] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.248925] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.248937] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.248992] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.248994] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.249014] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.249019] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.249048] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.249051] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff88040f4cc578), AE_NOT_FOUND (20150930/psparse-542)
[ 1.249056] ata5.00: configured for UDMA/133
[ 1.250095] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.250110] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.253435] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.253437] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4cc5f0), AE_NOT_FOUND (20150930/psparse-542)
[ 1.253442] ata6.00: ATAPI: PIONEER BD-RW BDR-S09, 1.34, max UDMA/100
[ 1.256961] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.256963] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040f4cc5f0), AE_NOT_FOUND (20150930/psparse-542)
[ 1.256968] ata6.00: configured for UDMA/100
[ 1.258170] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.258178] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88040f4cc500), AE_NOT_FOUND (20150930/psparse-542)
[ 1.258195] ata4.00: ATAPI: HL-DT-ST BDDVDRW CH10LS28, 1.02, max UDMA/133
[ 1.262136] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.262143] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88040f4cc500), AE_NOT_FOUND (20150930/psparse-542)
[ 1.262157] ata4.00: configured for UDMA/133
[ 1.276919] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW CH10LS28 1.02 PQ: 0 ANSI: 5
[ 1.301615] sdc: sdc1 sdc2 sdc3
[ 1.302150] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.315356] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.315360] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.315534] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.315598] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 1.316516] scsi 4:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 1.334297] usb 6-4: new SuperSpeed USB device number 3 using xhci_hcd
[ 1.337102] sr 4:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.337281] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 1.337333] sr 4:0:0:0: Attached scsi generic sg4 type 5
[ 1.344817] scsi 5:0:0:0: CD-ROM PIONEER BD-RW BDR-S09 1.34 PQ: 0 ANSI: 5
[ 1.370079] usb 5-4: new high-speed USB device number 3 using xhci_hcd
[ 1.377993] sr 5:0:0:0: [sr2] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.378148] sr 5:0:0:0: Attached scsi CD-ROM sr2
[ 1.378211] sr 5:0:0:0: Attached scsi generic sg5 type 5
[ 1.470072] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.501055] usb 5-4: New USB device found, idVendor=2109, idProduct=2812
[ 1.501057] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.501058] usb 5-4: Product: USB2.0 Hub
[ 1.501059] usb 5-4: Manufacturer: VIA Labs, Inc.
[ 1.501840] hub 5-4:1.0: USB hub found
[ 1.502219] hub 5-4:1.0: 4 ports detected
[ 1.563733] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0608
[ 1.563738] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.563740] usb 2-1.6: Product: USB2.0 Hub
[ 1.564281] hub 2-1.6:1.0: USB hub found
[ 1.564607] hub 2-1.6:1.0: 4 ports detected
[ 1.573858] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 1.573900] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 1.586702] usb 6-4: New USB device found, idVendor=2109, idProduct=0812
[ 1.586704] usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.586705] usb 6-4: Product: USB3.0 Hub
[ 1.586706] usb 6-4: Manufacturer: VIA Labs, Inc.
[ 1.587446] hub 6-4:1.0: USB hub found
[ 1.587669] hub 6-4:1.0: 4 ports detected
[ 1.694063] tsc: Refined TSC clocksource calibration: 3605.658 MHz
[ 1.694068] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33f934427b6, max_idle_ns: 440795345966 ns
[ 1.698060] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.838023] usb 2-1.6.2: new high-speed USB device number 4 using ehci-pci
[ 1.930651] usb 2-1.6.2: New USB device found, idVendor=1a40, idProduct=0101
[ 1.930656] usb 2-1.6.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.930659] usb 2-1.6.2: Product: USB 2.0 Hub
[ 1.930913] hub 2-1.6.2:1.0: USB hub found
[ 1.931020] hub 2-1.6.2:1.0: 4 ports detected
[ 1.958347] usb 6-4.1: new SuperSpeed USB device number 4 using xhci_hcd
[ 1.980721] usb 6-4.1: New USB device found, idVendor=0b95, idProduct=1790
[ 1.980722] usb 6-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.980723] usb 6-4.1: Product: AX88179
[ 1.980724] usb 6-4.1: Manufacturer: ASIX Elec. Corp.
[ 1.980725] usb 6-4.1: SerialNumber: 00000000000009
[ 2.001988] usb 2-1.6.3: new high-speed USB device number 5 using ehci-pci
[ 2.095646] usb 2-1.6.3: New USB device found, idVendor=05e3, idProduct=0608
[ 2.095651] usb 2-1.6.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.095654] usb 2-1.6.3: Product: USB2.0 Hub
[ 2.096217] hub 2-1.6.3:1.0: USB hub found
[ 2.096538] hub 2-1.6.3:1.0: 4 ports detected
[ 2.169984] usb 2-1.6.4: new full-speed USB device number 6 using ehci-pci
[ 2.197315] random: nonblocking pool is initialized
[ 2.268000] usb 2-1.6.4: New USB device found, idVendor=045e, idProduct=0745
[ 2.268002] usb 2-1.6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.268003] usb 2-1.6.4: Product: Microsoft® Nano Transceiver v2.0
[ 2.268004] usb 2-1.6.4: Manufacturer: Microsoft
[ 2.270680] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.283224] usbcore: registered new interface driver usbhid
[ 2.283226] usbhid: USB HID core driver
[ 2.284165] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-1.6.4:1.0/0003:045E:0745.0001/input/input6
[ 2.338209] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.6.4/input0
[ 2.338392] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-1.6.4:1.1/0003:045E:0745.0002/input/input7
[ 2.349970] usb 2-1.6.2.4: new full-speed USB device number 7 using ehci-pci
[ 2.394320] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.6.4/input1
[ 2.404404] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-1.6.4:1.2/0003:045E:0745.0003/input/input8
[ 2.458226] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.6.4/input2
[ 2.593927] raid6: sse2x1 gen() 11521 MB/s
[ 2.641932] usb 2-1.6.3.1: new high-speed USB device number 8 using ehci-pci
[ 2.661908] raid6: sse2x1 xor() 8900 MB/s
[ 2.667709] usb 2-1.6.2.4: New USB device found, idVendor=0a12, idProduct=0001
[ 2.667711] usb 2-1.6.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.667712] usb 2-1.6.2.4: Product: BT2.0
[ 2.729911] raid6: sse2x2 gen() 12374 MB/s
[ 2.797898] raid6: sse2x2 xor() 7227 MB/s
[ 2.865895] raid6: sse2x4 gen() 12318 MB/s
[ 2.933882] raid6: sse2x4 xor() 7774 MB/s
[ 2.933884] raid6: using algorithm sse2x2 gen() 12374 MB/s
[ 2.933885] raid6: .... xor() 7227 MB/s, rmw enabled
[ 2.933886] raid6: using ssse3x2 recovery algorithm
[ 2.933900] clocksource: Switched to clocksource tsc
[ 2.935141] xor: automatically using best checksumming function:
[ 2.955289] usb 2-1.6.3.1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.955290] usb 2-1.6.3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.955291] usb 2-1.6.3.1: Product: USB2.0 Hub
[ 2.955674] hub 2-1.6.3.1:1.0: USB hub found
[ 2.956038] hub 2-1.6.3.1:1.0: 2 ports detected
[ 2.973865] avx : 28136.000 MB/sec
[ 2.981852] Btrfs loaded
[ 3.029883] usb 2-1.6.3.2: new high-speed USB device number 9 using ehci-pci
[ 3.124414] usb 2-1.6.3.2: New USB device found, idVendor=04a9, idProduct=10d8
[ 3.124419] usb 2-1.6.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.124422] usb 2-1.6.3.2: Product: iP4900 series
[ 3.124424] usb 2-1.6.3.2: Manufacturer: Canon
[ 3.124426] usb 2-1.6.3.2: SerialNumber: 905C51
[ 3.197845] usb 2-1.6.3.4: new full-speed USB device number 10 using ehci-pci
[ 3.219131] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.293236] usb 2-1.6.3.4: New USB device found, idVendor=046d, idProduct=c52b
[ 3.293242] usb 2-1.6.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.293244] usb 2-1.6.3.4: Product: USB Receiver
[ 3.293247] usb 2-1.6.3.4: Manufacturer: Logitech
[ 3.329895] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.329994] systemd[1]: Detected architecture x86-64.
[ 3.330110] systemd[1]: Set hostname to <LMC-18N>.
[ 3.416216] systemd[1]: Listening on Journal Socket.
[ 3.416250] systemd[1]: Reached target Encrypted Volumes.
[ 3.416272] systemd[1]: Listening on udev Control Socket.
[ 3.416289] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.416294] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.416305] systemd[1]: Listening on Syslog Socket.
[ 3.416320] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.416332] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.416341] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.416374] systemd[1]: Listening on Journal Audit Socket.
[ 3.416386] systemd[1]: Listening on udev Kernel Socket.
[ 3.416401] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.416407] systemd[1]: Reached target Remote File Systems.
[ 3.416428] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.416495] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.416562] systemd[1]: Created slice System Slice.
[ 3.429969] systemd[1]: Started Read required files in advance.
[ 3.430390] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.430739] systemd[1]: Starting Journal Service...
[ 3.430989] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.431334] systemd[1]: Starting Set console keymap...
[ 3.432967] systemd[1]: Starting Load Kernel Modules...
[ 3.433196] systemd[1]: Mounting Huge Pages File System...
[ 3.433452] systemd[1]: Starting Uncomplicated firewall...
[ 3.433728] systemd[1]: Started Braille Device Support.
[ 3.434099] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.434437] systemd[1]: Mounting Debug File System...
[ 3.434550] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.436808] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.436892] systemd[1]: Created slice User and Session Slice.
[ 3.436906] systemd[1]: Reached target Slices.
[ 3.437904] systemd[1]: Reached target User and Group Name Lookups.
[ 3.439140] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.439318] systemd[1]: Started Uncomplicated firewall.
[ 3.442099] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.442169] systemd[1]: Mounted Debug File System.
[ 3.442201] systemd[1]: Mounted Huge Pages File System.
[ 3.450976] lp: driver loaded but no devices found
[ 3.452949] ppdev: user-space parallel port driver
[ 3.455676] systemd[1]: Started Load Kernel Modules.
[ 3.457957] systemd[1]: Starting Apply Kernel Variables...
[ 3.458292] systemd[1]: Mounting FUSE Control File System...
[ 3.458679] systemd[1]: Started LVM2 metadata daemon.
[ 3.459138] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.460117] systemd[1]: Mounted FUSE Control File System.
[ 3.466834] systemd[1]: Started Apply Kernel Variables.
[ 3.468453] systemd[1]: Started Journal Service.
[ 3.502508] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 3.511200] systemd-journald[411]: Received request to flush runtime journal from PID 1
[ 3.743659] EDAC MC: Ver: 3.0.0
[ 3.745412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.748451] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 3.748457] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.748460] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 3.748463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.748464] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 3.748467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.748468] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 3.748471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.748471] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.802917] AVX version of gcm_enc/dec engaged.
[ 3.802920] AES CTR mode by8 optimization enabled
[ 3.814749] Adding 20971516k swap on /dev/sdb2. Priority:-1 extents:1 across:20971516k SSFS
[ 3.832039] kvm: disabled by bios
[ 3.874296] kvm: disabled by bios
[ 3.875819] Bluetooth: Core ver 2.21
[ 3.875829] NET: Registered protocol family 31
[ 3.875830] Bluetooth: HCI device and connection manager initialized
[ 3.875833] Bluetooth: HCI socket layer initialized
[ 3.875836] Bluetooth: L2CAP socket layer initialized
[ 3.875841] Bluetooth: SCO socket layer initialized
[ 3.877114] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.6.3.4/input2
[ 3.877819] usblp 2-1.6.3.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10D8
[ 3.877838] usbcore: registered new interface driver usblp
[ 3.878112] intel_rapl: Found RAPL domain package
[ 3.878114] intel_rapl: Found RAPL domain core
[ 3.878116] intel_rapl: Found RAPL domain uncore
[ 3.878119] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 3.879124] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.879126] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.879128] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.879129] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.879131] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 3.879132] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.879133] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.879135] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.879136] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.880538] usbcore: registered new interface driver btusb
[ 3.896975] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.897030] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.897082] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.897149] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.897217] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 3.897277] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 3.897330] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.897394] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.897477] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 3.897532] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 3.901366] asus_wmi: ASUS WMI generic driver loaded
[ 3.934168] asus_wmi: Initialization: 0x0
[ 3.934180] asus_wmi: BIOS WMI version: 0.9
[ 3.934198] asus_wmi: SFUN value: 0x0
[ 3.934354] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19
[ 3.934406] asus_wmi: Number of fans: 1
[ 3.935897] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.994750] cgroup: new mount options do not match the existing superblock, will be ignored
[ 3.994776] input: Logitech K360 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.3/2-1.6.3.4/2-1.6.3.4:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input20
[ 3.994923] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:1d.0-1.6.3.4:1
[ 4.155569] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.155571] Bluetooth: BNEP filters: protocol multicast
[ 4.155574] Bluetooth: BNEP socket layer initialized
[ 4.199282] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 4.308672] r8169 0000:05:00.0 enp5s0: link down
[ 4.308672] r8169 0000:05:00.0 enp5s0: link down
[ 4.308720] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 4.617335] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.4/2-1.6.4:1.1/0003:045E:0745.0008/input/input21
[ 4.669857] hid-generic 0003:045E:0745.0008: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.6.4/input1
[ 5.178661] ax88179_178a 6-4.1:1.0 eth0: register 'ax88179_178a' at usb-0000:04:00.0-4.1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:23:55:3c:55:47
[ 5.178685] usbcore: registered new interface driver ax88179_178a
[ 5.184754] ax88179_178a 6-4.1:1.0 enx0023553c5547: renamed from eth0
[ 5.205715] IPv6: ADDRCONF(NETDEV_UP): enx0023553c5547: link is not ready
[ 5.527168] IPv6: ADDRCONF(NETDEV_UP): enx0023553c5547: link is not ready
[ 7.083533] r8169 0000:05:00.0 enp5s0: link up
[ 7.083540] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 9.092507] usblp2: nonzero read bulk status received: -108
[ 9.096944] usblp2: removed
[ 9.102460] usblp 2-1.6.3.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10D8
[ 12.439420] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.020714] Bluetooth: RFCOMM TTY layer initialized
[ 13.020719] Bluetooth: RFCOMM socket layer initialized
[ 13.020722] Bluetooth: RFCOMM ver 1.11
xxx@LMC-18N ~ $
