https://forum-francophone-linuxmint.fr/
Dernier message de la page précédente :
Yep merci arghlub .angelique a écrit :Dernière tentative , on va rajouter comme précédemment les 2 lignes dans d'autres fichiers de conf.
# Epson Expression Home XP-245
ATTRS{idVendor}=="04b8", ATTRS{idProduct}=="1116", ENV{libsane_matched}="yes"
------------------
Donc il me faudrait le contenu de ces fichiers s'ils existent:
puis :Code : Tout sélectionner
sudo xed /etc/sane.d/epkowa.conf
------Code : Tout sélectionner
sudo xed /etc/sane.d/epson.conf
Par contre y'a une discussion pour la xp-520 en wifi ça marche :
https://forum-francophone-linuxmint.fr/ ... 621#p19621
elle a quoi comme IP LAN ton imprimante, depuis le menu lcd de l'imprimante ça se trouve
Code : Tout sélectionner
# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004, 2008, 2009 Olaf Meeuwissen
#
# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.
# Detect all devices supported by the backend.
# If you don't have a SCSI device, you can comment out the "scsi"
# keyword. Similarly for the other keywords.
#
usb
scsi
# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
#
# usb <USB vendor ID> <USB product ID>
#
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes). In order
# to find the USB product ID, use lsusb(1).
# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
# which has a product ID of 0x0110, would look as follows:
#
#usb 0x04b8 0x0110
# For SCSI devices not detected, you can add an entry like:
#
# scsi EPSON GT-20000
#
# where the GT-20000 bit corresponds to the SCSI model information as
# shown in the output of dmesg(1) or in the /var/log/kern.log file.
# Network attached devices may be made to work by first installing the
# (non-free) iscan-network-nt package and then adding configuration lines
# as per information below.
#
# For each network attached device, you must add an entry as follows:
#
# net <IP-address|hostname> [port-number]
#
# Ask your network administrator for the device's IP address or check
# for yourself on the panel (if it has one). The port-number is very
# optional and defaults to 1865.
# Note that network attached devices are not queried unless configured
# in this file.
#
# Examples:
#
#net 192.16.136.2 1865
#net 10.0.0.1
#net scanner.mydomain.com
# Some backend behaviour can be customized by using the option keyword
# followed by an option name, as shown below.
#
# option <option-name>
#
# Currently available options:
#
# Makes the automatic document feeder the default document source
#option prefer-adfCode : Tout sélectionner
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend.
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0Code : Tout sélectionner
usb 0x04b8 0x1116Code : Tout sélectionner
usb 0x04b8 0x1116
usb /dev/usbscanner0
usb /dev/usb/scanner0
Code : Tout sélectionner
#epson
epson2
Code : Tout sélectionner
epson
#epson2
