Forum-Francophone-LinuxMint.fr

Code : Tout sélectionner

[    0.000000] microcode: microcode updated early to revision 0x60f, date = 2010-09-29
[    0.000000] Linux version 5.4.0-42-generic (buildd@lgw01-amd64-038) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 (Ubuntu 5.4.0-42.46-generic 5.4.44)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-42-generic root=/dev/mapper/xxxx-root ro quiet splash zswap.enabled=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfedffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Sony Corporation VGN-FZ31Z/VAIO, BIOS R2110J7 12/21/2007
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.436 MHz processor
[    0.006850] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.006852] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.006858] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.006863] MTRR default type: uncachable
[    0.006864] MTRR fixed ranges enabled:
[    0.006866]   00000-9FFFF write-back
[    0.006867]   A0000-BFFFF uncachable
[    0.006868]   C0000-FFFFF write-protect
[    0.006868] MTRR variable ranges enabled:
[    0.006870]   0 base 0C0000000 mask FC0000000 uncachable
[    0.006871]   1 base 000000000 mask F00000000 write-back
[    0.006872]   2 base 100000000 mask FC0000000 write-back
[    0.006873]   3 base 0BFF00000 mask FFFF00000 uncachable
[    0.006874]   4 disabled
[    0.006874]   5 disabled
[    0.006875]   6 disabled
[    0.006875]   7 disabled
[    0.008304] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008414] total RAM covered: 4095M
[    0.008737] Found optimal setting for mtrr clean up
[    0.008738]  gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
[    0.010091] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.010096] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[    0.017578] found SMP MP-table at [mem 0x000f8080-0x000f808f]
[    0.023628] check: Scanning 1 areas for low memory corruption
[    0.023635] BRK [0x7fc01000, 0x7fc01fff] PGTABLE
[    0.023638] BRK [0x7fc02000, 0x7fc02fff] PGTABLE
[    0.023639] BRK [0x7fc03000, 0x7fc03fff] PGTABLE
[    0.023681] BRK [0x7fc04000, 0x7fc04fff] PGTABLE
[    0.023682] BRK [0x7fc05000, 0x7fc05fff] PGTABLE
[    0.023922] RAMDISK: [mem 0x2dd59000-0x32ea3fff]
[    0.023934] ACPI: Early table checksum verification disabled
[    0.023939] ACPI: RSDP 0x00000000000F8050 000024 (v02 PTLTD )
[    0.023943] ACPI: XSDT 0x00000000BFED7EF7 000084 (v01 Sony   VAIO     20071221 PTL  00000000)
[    0.023949] ACPI: FACP 0x00000000BFEDFC04 0000F4 (v03 Sony   VAIO     20071221 PTL  00000001)
[    0.023955] ACPI: DSDT 0x00000000BFED9217 006979 (v02 Sony   VAIO     20071221 PTL  20050624)
[    0.023959] ACPI: FACS 0x00000000BFEE2FC0 000040
[    0.023961] ACPI: FACS 0x00000000BFEE2FC0 000040
[    0.023964] ACPI: APIC 0x00000000BFEDFCF8 000068 (v01 Sony   VAIO     20071221 PTL  0000005A)
[    0.023967] ACPI: HPET 0x00000000BFEDFD60 000038 (v01 Sony   VAIO     20071221 PTL  0000005A)
[    0.023971] ACPI: MCFG 0x00000000BFEDFD98 00003C (v01 Sony   VAIO     20071221 PTL  0000005A)
[    0.023974] ACPI: SLIC 0x00000000BFEDFDD4 000176 (v01 Sony   VAIO     20071221 PTL  01000000)
[    0.023977] ACPI: TMOR 0x00000000BFEDFF4A 000026 (v01 Sony   VAIO     20071221 PTL  00000003)
[    0.023981] ACPI: APIC 0x00000000BFEDFF70 000068 (v01 Sony   VAIO     20071221 PTL  00000000)
[    0.023984] ACPI: BOOT 0x00000000BFEDFFD8 000028 (v01 Sony   VAIO     20071221 PTL  00000001)
[    0.023987] ACPI: SSDT 0x00000000BFED90FA 00011D (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.023991] ACPI: SSDT 0x00000000BFED8563 000287 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.023994] ACPI: SSDT 0x00000000BFED84AF 0000B4 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.023998] ACPI: SSDT 0x00000000BFED7F7B 000534 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.024001] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.024002] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.024011] ACPI: Local APIC address 0xfee00000
[    0.024114] No NUMA configuration found
[    0.024115] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.024126] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[    0.024411] Zone ranges:
[    0.024412]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024413]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024414]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.024415]   Device   empty
[    0.024416] Movable zone start for each node
[    0.024419] Early memory node ranges
[    0.024420]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.024422]   node   0: [mem 0x0000000000100000-0x00000000bfecffff]
[    0.024423]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.024434] Zeroed struct page in unavailable ranges: 402 pages
[    0.024435] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.024436] On node 0 totalpages: 1048174
[    0.024437]   DMA zone: 64 pages used for memmap
[    0.024438]   DMA zone: 21 pages reserved
[    0.024439]   DMA zone: 3998 pages, LIFO batch:0
[    0.024511]   DMA32 zone: 12220 pages used for memmap
[    0.024512]   DMA32 zone: 782032 pages, LIFO batch:63
[    0.050770]   Normal zone: 4096 pages used for memmap
[    0.050772]   Normal zone: 262144 pages, LIFO batch:63
[    0.059959] ACPI: PM-Timer IO Port: 0x1008
[    0.059961] ACPI: Local APIC address 0xfee00000
[    0.059974] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.059975] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.059992] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.059995] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.059997] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.059998] ACPI: IRQ0 used by override.
[    0.059999] ACPI: IRQ9 used by override.
[    0.060002] Using ACPI (MADT) for SMP configuration information
[    0.060003] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.060013] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.060036] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.060038] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.060039] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[    0.060039] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[    0.060040] PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
[    0.060040] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.060042] PM: Registered nosave memory: [mem 0xbfed0000-0xbfedffff]
[    0.060043] PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
[    0.060043] PM: Registered nosave memory: [mem 0xbfee3000-0xbfffffff]
[    0.060044] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.060045] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.060045] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.060046] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.060047] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[    0.060047] PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff]
[    0.060048] PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff]
[    0.060049] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.060049] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[    0.060050] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[    0.060050] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.060051] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.060052] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.060054] [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.060056] Booting paravirtualized kernel on bare hardware
[    0.060061] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.060069] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.061259] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
[    0.061266] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
[    0.061267] pcpu-alloc: [0] 0 1 
[    0.061306] Built 1 zonelists, mobility grouping on.  Total pages: 1031773
[    0.061307] Policy zone: Normal
[    0.061310] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-42-generic root=/dev/mapper/xxx-root ro quiet splash zswap.enabled=1
[    0.063412] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.064369] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.064419] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.095829] Calgary: detecting Calgary via BIOS EBDA area
[    0.095831] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.136059] Memory: 3938280K/4192696K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 254416K reserved, 0K cma-reserved)
[    0.136073] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.136285] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.136309] Kernel/User page tables isolation: enabled
[    0.136337] ftrace: allocating 44488 entries in 174 pages
[    0.156544] rcu: Hierarchical RCU implementation.
[    0.156546] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.156547] 	Tasks RCU enabled.
[    0.156548] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.156549] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.159934] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.160192] Console: colour dummy device 80x25
[    0.160198] printk: console [tty0] enabled
[    0.160221] ACPI: Core revision 20190816
[    0.160309] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.160324] APIC: Switch to symmetric I/O mode setup
[    0.160760] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.180324] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2562039b669, max_idle_ns: 440795308344 ns
[    0.180329] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.87 BogoMIPS (lpj=10373744)
[    0.180331] pid_max: default: 32768 minimum: 301
[    0.180366] LSM: Security Framework initializing
[    0.180380] Yama: becoming mindful.
[    0.180412] AppArmor: AppArmor initialized
[    0.180467] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.180491] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.180512] *** VALIDATE tmpfs ***
[    0.180694] *** VALIDATE proc ***
[    0.180759] *** VALIDATE cgroup1 ***
[    0.180761] *** VALIDATE cgroup2 ***
[    0.180816] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.180819] process: using mwait in idle threads
[    0.180822] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.180823] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.180826] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.180827] Spectre V2 : Mitigation: Full generic retpoline
[    0.180828] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.180829] Speculative Store Bypass: Vulnerable
[    0.180832] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.180980] Freeing SMP alternatives memory: 40K
[    0.296483] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T9500  @ 2.60GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.296639] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.296646] ... version:                2
[    0.296647] ... bit width:              40
[    0.296648] ... generic registers:      2
[    0.296649] ... value mask:             000000ffffffffff
[    0.296650] ... max period:             000000007fffffff
[    0.296650] ... fixed-purpose events:   3
[    0.296651] ... event mask:             0000000700000003
[    0.296700] rcu: Hierarchical SRCU implementation.
[    0.297634] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.297680] smp: Bringing up secondary CPUs ...
[    0.297853] x86: Booting SMP configuration:
[    0.297854] .... node  #0, CPUs:      #1
[    0.302379] smp: Brought up 1 node, 2 CPUs
[    0.302379] smpboot: Max logical packages: 1
[    0.302379] smpboot: Total of 2 processors activated (10373.74 BogoMIPS)
[    0.304762] devtmpfs: initialized
[    0.304762] x86/mm: Memory block size: 128MB
[    0.304762] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.304762] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.304762] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.304762] pinctrl core: initialized pinctrl subsystem
[    0.304762] PM: RTC time: 19:27:08, date: 2020-08-22
[    0.304762] NET: Registered protocol family 16
[    0.304785] audit: initializing netlink subsys (disabled)
[    0.304795] audit: type=2000 audit(1598124427.144:1): state=initialized audit_enabled=0 res=1
[    0.304795] EISA bus registered
[    0.304795] cpuidle: using governor ladder
[    0.304795] cpuidle: using governor menu
[    0.304795] Simple Boot Flag at 0x36 set to 0x1
[    0.304795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.304795] ACPI: bus type PCI registered
[    0.304795] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.304795] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.304795] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.308346] PCI: Using configuration type 1 for base access
[    0.310635] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.312435] ACPI: Added _OSI(Module Device)
[    0.312436] ACPI: Added _OSI(Processor Device)
[    0.312437] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.312437] ACPI: Added _OSI(Processor Aggregator Device)
[    0.312439] ACPI: Added _OSI(Linux-Dell-Video)
[    0.312440] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.312441] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.319114] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.319114] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.319423] ACPI: Dynamic OEM Table Load:
[    0.319429] ACPI: SSDT 0xFFFF8ADBBB353C00 0002E3 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.320140] ACPI: Dynamic OEM Table Load:
[    0.320145] ACPI: SSDT 0xFFFF8ADBBB286000 0004B7 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.321152] ACPI: Dynamic OEM Table Load:
[    0.321157] ACPI: SSDT 0xFFFF8ADBBB2BEF00 0000E4 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.321665] ACPI: Dynamic OEM Table Load:
[    0.321669] ACPI: SSDT 0xFFFF8ADBBB2CB600 000092 (v01 Sony   VAIO     20071221 PTL  20050624)
[    0.322407] ACPI: EC: EC started
[    0.322408] ACPI: EC: interrupt blocked
[    0.544395] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.544397] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.544399] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.544399] ACPI: Interpreter enabled
[    0.544423] ACPI: (supports S0 S3 S4 S5)
[    0.544424] ACPI: Using IOAPIC for interrupt routing
[    0.544455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.544695] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.566207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.566215] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.566605] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.566607] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.566609] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.566610] acpi PNP0A08:00: _OSC: platform willing to grant []
[    0.566612] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.568634] PCI host bridge to bus 0000:00
[    0.568637] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.568638] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.568640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.568641] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.568643] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.568644] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.568646] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.568647] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.568649] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.568660] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.569391] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.569443] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.570193] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.570285] pci 0000:00:1a.0: reg 0x20: [io  0x1800-0x181f]
[    0.571046] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.571133] pci 0000:00:1a.1: reg 0x20: [io  0x1820-0x183f]
[    0.571893] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.571930] pci 0000:00:1a.7: reg 0x10: [mem 0xfc304800-0xfc304bff]
[    0.572073] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.572814] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.572851] pci 0000:00:1b.0: reg 0x10: [mem 0xfc300000-0xfc303fff 64bit]
[    0.572966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.573706] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.573849] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.574596] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.574739] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.575473] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[    0.575612] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.576359] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.576498] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.577239] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.577335] pci 0000:00:1d.0: reg 0x20: [io  0x1840-0x185f]
[    0.578092] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.578186] pci 0000:00:1d.1: reg 0x20: [io  0x1860-0x187f]
[    0.578929] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.579007] pci 0000:00:1d.2: reg 0x20: [io  0x1880-0x189f]
[    0.579772] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.579809] pci 0000:00:1d.7: reg 0x10: [mem 0xfc304c00-0xfc304fff]
[    0.579938] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.580671] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.581472] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.581644] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.581653] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.582424] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.582455] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.582475] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.582494] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.582512] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.582525] pci 0000:00:1f.1: reg 0x20: [io  0x18a0-0x18af]
[    0.582553] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.582555] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.582556] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.582557] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.583283] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.583313] pci 0000:00:1f.2: reg 0x10: [io  0x18d8-0x18df]
[    0.583325] pci 0000:00:1f.2: reg 0x14: [io  0x18cc-0x18cf]
[    0.583338] pci 0000:00:1f.2: reg 0x18: [io  0x18d0-0x18d7]
[    0.583350] pci 0000:00:1f.2: reg 0x1c: [io  0x18c8-0x18cb]
[    0.583362] pci 0000:00:1f.2: reg 0x20: [io  0x18e0-0x18ff]
[    0.583375] pci 0000:00:1f.2: reg 0x24: [mem 0xfc304000-0xfc3047ff]
[    0.583438] pci 0000:00:1f.2: PME# supported from D3hot
[    0.584167] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.584192] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
[    0.584232] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
[    0.585110] pci 0000:01:00.0: [10de:0425] type 00 class 0x030000
[    0.585134] pci 0000:01:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
[    0.585148] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.585161] pci 0000:01:00.0: reg 0x1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.585170] pci 0000:01:00.0: reg 0x24: [io  0x2000-0x207f]
[    0.585180] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.585189] pci 0000:01:00.0: enabling Extended Tags
[    0.585391] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.585394] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.585396] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.585399] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.585477] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.585483] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.585489] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.585498] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.585589] acpiphp: Slot [1] registered
[    0.585599] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.585605] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.585611] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.585620] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.585775] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000
[    0.585864] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfa001fff 64bit]
[    0.586116] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.586368] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[    0.586374] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.586380] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.586389] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.586472] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    0.586520] pci_bus 0000:09: extended config space not accessible
[    0.586585] pci 0000:09:03.0: [104c:8039] type 02 class 0x060700
[    0.586617] pci 0000:09:03.0: reg 0x10: [mem 0xfc004000-0xfc004fff]
[    0.586681] pci 0000:09:03.0: supports D1 D2
[    0.586683] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.586787] pci 0000:09:03.1: [104c:803a] type 00 class 0x0c0010
[    0.586816] pci 0000:09:03.1: reg 0x10: [mem 0xfc006000-0xfc0067ff]
[    0.586831] pci 0000:09:03.1: reg 0x14: [mem 0xfc000000-0xfc003fff]
[    0.586952] pci 0000:09:03.1: supports D1 D2
[    0.586953] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.587034] pci 0000:09:03.2: [104c:803b] type 00 class 0x018000
[    0.587064] pci 0000:09:03.2: reg 0x10: [mem 0xfc005000-0xfc005fff]
[    0.587198] pci 0000:09:03.2: supports D1 D2
[    0.587199] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
[    0.587353] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[    0.587362] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.587373] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.587375] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.587376] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.587378] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.587379] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.587381] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.587382] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.587384] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.587425] pci_bus 0000:0a: extended config space not accessible
[    0.587447] pci_bus 0000:0a: busn_res: [bus 0a] end can not be updated to 0d
[    0.587456] pci 0000:00:1e.0: bridge has subordinate 0a but max busn 0d
[    0.587704] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.587804] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.587903] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.588002] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.588101] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.588200] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.588299] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.588402] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.588755] ACPI: EC: interrupt unblocked
[    0.588771] ACPI: EC: event unblocked
[    0.588781] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.588783] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[    0.588877] iommu: Default domain type: Translated 
[    0.589102] SCSI subsystem initialized
[    0.589140] libata version 3.00 loaded.
[    0.589156] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.589156] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.589156] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.589156] vgaarb: loaded
[    0.589156] ACPI: bus type USB registered
[    0.589156] usbcore: registered new interface driver usbfs
[    0.589156] usbcore: registered new interface driver hub
[    0.589156] usbcore: registered new device driver usb
[    0.589156] pps_core: LinuxPPS API ver. 1 registered
[    0.589156] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.589156] PTP clock support registered
[    0.589156] EDAC MC: Ver: 3.0.0
[    0.589156] PCI: Using ACPI for IRQ routing
[    0.599847] PCI: pci_cache_line_size set to 64 bytes
[    0.600016] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.600017] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
[    0.600133] NetLabel: Initializing
[    0.600134] NetLabel:  domain hash size = 128
[    0.600134] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.600164] NetLabel:  unlabeled traffic allowed by default
[    0.600183] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.600183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.600183] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.600351] clocksource: Switched to clocksource tsc-early
[    0.620098] *** VALIDATE bpf ***
[    0.620254] VFS: Disk quotas dquot_6.6.0
[    0.620278] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.620323] *** VALIDATE ramfs ***
[    0.620328] *** VALIDATE hugetlbfs ***
[    0.620474] AppArmor: AppArmor Filesystem Enabled
[    0.620526] pnp: PnP ACPI init
[    0.637233] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.637235] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.637237] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.637239] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.637240] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.637242] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.637244] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.637245] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.637253] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637681] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.637687] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.637760] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.637762] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.637764] system 00:02: [io  0x1000-0x107f] has been reserved
[    0.637765] system 00:02: [io  0x1180-0x11bf] has been reserved
[    0.637767] system 00:02: [io  0x1640-0x164f] has been reserved
[    0.637769] system 00:02: [io  0xfe00-0xfe7f] has been reserved
[    0.637771] system 00:02: [io  0xfe80-0xfeff] has been reserved
[    0.637776] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637813] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.637847] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.637879] pnp 00:05: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.637897] pnp: PnP ACPI: found 6 devices
[    0.639879] thermal_sys: Registered thermal governor 'fair_share'
[    0.639880] thermal_sys: Registered thermal governor 'bang_bang'
[    0.639881] thermal_sys: Registered thermal governor 'step_wise'
[    0.639882] thermal_sys: Registered thermal governor 'user_space'
[    0.639883] thermal_sys: Registered thermal governor 'power_allocator'
[    0.644410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.644458] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.644460] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[    0.644462] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[    0.644475] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 09-0a] add_size 1000
[    0.644486] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.644491] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.644494] pci 0000:00:1c.4: BAR 13: assigned [io  0x6000-0x6fff]
[    0.644497] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.644500] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0400000-0xc04000ff]
[    0.644508] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
[    0.644510] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    0.644513] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.644514] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.644518] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.644520] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.644524] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.644529] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.644536] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.644542] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.644551] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.644556] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.644563] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.644568] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.644578] pci 0000:00:1c.2: PCI bridge to [bus 06-07]
[    0.644582] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.644590] pci 0000:00:1c.2:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.644596] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.644604] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    0.644609] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.644616] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.644622] pci 0000:00:1c.4:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.644634] pci 0000:09:03.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[    0.644637] pci 0000:09:03.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.644639] pci 0000:09:03.0: BAR 13: assigned [io  0x7000-0x70ff]
[    0.644641] pci 0000:09:03.0: BAR 14: assigned [io  0x7400-0x74ff]
[    0.644643] pci 0000:09:03.0: CardBus bridge to [bus 0a]
[    0.644644] pci 0000:09:03.0:   bridge window [io  0x7000-0x70ff]
[    0.644650] pci 0000:09:03.0:   bridge window [io  0x7400-0x74ff]
[    0.644657] pci 0000:09:03.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
[    0.644663] pci 0000:09:03.0:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.644670] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[    0.644674] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.644682] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.644694] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.644695] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.644697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644698] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.644700] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.644701] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.644703] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.644704] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.644706] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.644707] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[    0.644708] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.644710] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.644711] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.644713] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.644714] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.644715] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.644717] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.644718] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.644720] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.644721] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[    0.644722] pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
[    0.644724] pci_bus 0000:08: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.644725] pci_bus 0000:08: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.644727] pci_bus 0000:09: resource 0 [io  0x7000-0x7fff]
[    0.644728] pci_bus 0000:09: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.644730] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7 window]
[    0.644731] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff window]
[    0.644733] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644734] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.644735] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.644737] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.644738] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.644739] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.644741] pci_bus 0000:0a: resource 0 [io  0x7000-0x70ff]
[    0.644742] pci_bus 0000:0a: resource 1 [io  0x7400-0x74ff]
[    0.644744] pci_bus 0000:0a: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[    0.644745] pci_bus 0000:0a: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.644855] NET: Registered protocol family 2
[    0.645227] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.645359] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.645621] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.645686] TCP: Hash tables configured (established 32768 bind 32768)
[    0.645790] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.645827] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.645879] NET: Registered protocol family 1
[    0.645888] NET: Registered protocol family 44
[    0.648281] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.648322] PCI: CLS 64 bytes, default 64
[    0.648380] Trying to unpack rootfs image as initramfs...
[    1.138462] Freeing initrd memory: 83244K
[    1.138539] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.138542] software IO TLB: mapped [mem 0xbbed0000-0xbfed0000] (64MB)
[    1.138774] check: Scanning for low memory corruption every 60 seconds
[    1.139317] Initialise system trusted keyrings
[    1.139333] Key type blacklist registered
[    1.139423] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.141532] zbud: loaded
[    1.142042] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.142284] fuse: init (API version 7.31)
[    1.142313] *** VALIDATE fuse ***
[    1.142315] *** VALIDATE fuse ***
[    1.142450] Platform Keyring initialized
[    1.148780] Key type asymmetric registered
[    1.148781] Asymmetric key parser 'x509' registered
[    1.148794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.148852] io scheduler mq-deadline registered
[    1.150522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.150596] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    1.150596] vesafb: scrolling: redraw
[    1.150598] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.150619] vesafb: framebuffer at 0xcd000000, mapped to 0x(____ptrval____), using 4032k, total 4032k
[    1.150670] fbcon: Deferring console take-over
[    1.150671] fb0: VESA VGA frame buffer device
[    1.150687] intel_idle: does not run on family 6 model 23
[    1.151578] ACPI: AC Adapter [ADP1] (on-line)
[    1.151651] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.151676] ACPI: Lid Switch [LID0]
[    1.151717] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.151759] ACPI: Power Button [PWRB]
[    1.152167] Monitor-Mwait will be used to enter C-1 state
[    1.152174] Monitor-Mwait will be used to enter C-2 state
[    1.152180] Monitor-Mwait will be used to enter C-3 state
[    1.152184] tsc: Marking TSC unstable due to TSC halts in idle
[    1.152262] clocksource: Switched to clocksource hpet
[    1.157581] thermal LNXTHERM:00: registered as thermal_zone0
[    1.157588] ACPI: Thermal Zone [TZ00] (42 C)
[    1.158619] ACPI: Invalid active0 threshold
[    1.160295] thermal LNXTHERM:01: registered as thermal_zone1
[    1.160302] ACPI: Thermal Zone [TZ01] (42 C)
[    1.160491] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.164030] Linux agpgart interface v0.103
[    1.167081] loop: module loaded
[    1.167305] ata_piix 0000:00:1f.1: version 2.13
[    1.168633] scsi host0: ata_piix
[    1.169296] scsi host1: ata_piix
[    1.169356] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    1.169358] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    1.169501] libphy: Fixed MDIO Bus: probed
[    1.169502] tun: Universal TUN/TAP device driver, 1.6
[    1.169785] PPP generic driver version 2.4.2
[    1.169856] VFIO - User Level meta-driver version: 0.3
[    1.169922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.169926] ehci-pci: EHCI PCI platform driver
[    1.170129] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.170136] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.170156] ehci-pci 0000:00:1a.7: debug port 1
[    1.174095] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.174109] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc304800
[    1.188395] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.188446] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.188448] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.188450] usb usb1: Product: EHCI Host Controller
[    1.188451] usb usb1: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    1.188453] usb usb1: SerialNumber: 0000:00:1a.7
[    1.188623] hub 1-0:1.0: USB hub found
[    1.188631] hub 1-0:1.0: 4 ports detected
[    1.189032] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.189037] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.189053] ehci-pci 0000:00:1d.7: debug port 1
[    1.192976] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.192990] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfc304c00
[    1.208388] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.208448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.208450] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.208452] usb usb2: Product: EHCI Host Controller
[    1.208453] usb usb2: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    1.208454] usb usb2: SerialNumber: 0000:00:1d.7
[    1.208593] hub 2-0:1.0: USB hub found
[    1.208605] hub 2-0:1.0: 6 ports detected
[    1.208860] ehci-platform: EHCI generic platform driver
[    1.208871] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.208878] ohci-pci: OHCI PCI platform driver
[    1.208891] ohci-platform: OHCI generic platform driver
[    1.208897] uhci_hcd: USB Universal Host Controller Interface driver
[    1.209073] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.209078] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.209087] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.209121] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    1.209193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.209195] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.209196] usb usb3: Product: UHCI Host Controller
[    1.209197] usb usb3: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.209198] usb usb3: SerialNumber: 0000:00:1a.0
[    1.209345] hub 3-0:1.0: USB hub found
[    1.209352] hub 3-0:1.0: 2 ports detected
[    1.209662] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.209667] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.209675] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.209710] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    1.209764] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.209766] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.209767] usb usb4: Product: UHCI Host Controller
[    1.209769] usb usb4: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.209770] usb usb4: SerialNumber: 0000:00:1a.1
[    1.209918] hub 4-0:1.0: USB hub found
[    1.209924] hub 4-0:1.0: 2 ports detected
[    1.210224] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.210230] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.210237] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.210259] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    1.210313] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.210315] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.210316] usb usb5: Product: UHCI Host Controller
[    1.210317] usb usb5: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.210318] usb usb5: SerialNumber: 0000:00:1d.0
[    1.210464] hub 5-0:1.0: USB hub found
[    1.210470] hub 5-0:1.0: 2 ports detected
[    1.210761] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.210766] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.210773] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.210804] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    1.210857] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.210858] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.210860] usb usb6: Product: UHCI Host Controller
[    1.210861] usb usb6: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.210862] usb usb6: SerialNumber: 0000:00:1d.1
[    1.210996] hub 6-0:1.0: USB hub found
[    1.211003] hub 6-0:1.0: 2 ports detected
[    1.211298] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.211303] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.211310] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.211334] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    1.211403] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    1.211405] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.211406] usb usb7: Product: UHCI Host Controller
[    1.211407] usb usb7: Manufacturer: Linux 5.4.0-42-generic uhci_hcd
[    1.211408] usb usb7: SerialNumber: 0000:00:1d.2
[    1.211535] hub 7-0:1.0: USB hub found
[    1.211542] hub 7-0:1.0: 2 ports detected
[    1.211736] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.216709] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.216713] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.217042] mousedev: PS/2 mouse device common for all mice
[    1.217397] rtc_cmos 00:03: RTC can wake from S4
[    1.217751] rtc_cmos 00:03: registered as rtc0
[    1.217768] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.217775] i2c /dev entries driver
[    1.217833] device-mapper: uevent: version 1.0.3
[    1.217991] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.218016] platform eisa.0: Probing EISA bus 0
[    1.218017] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.218019] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.218020] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.218022] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.218023] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.218024] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.218026] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.218027] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.218029] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.218030] platform eisa.0: EISA: Detected 0 cards
[    1.218034] intel_pstate: CPU model not supported
[    1.218095] ledtrig-cpu: registered to indicate activity on CPUs
[    1.218169] drop_monitor: Initializing network drop monitor service
[    1.218408] NET: Registered protocol family 10
[    1.220200] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.223355] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.233285] Segment Routing with IPv6
[    1.233314] NET: Registered protocol family 17
[    1.233375] Key type dns_resolver registered
[    1.233588] RAS: Correctable Errors collector initialized.
[    1.233632] microcode: sig=0x10676, pf=0x80, revision=0x60f
[    1.233705] microcode: Microcode Update Driver: v2.2.
[    1.233710] IPI shorthand broadcast: enabled
[    1.233811] registered taskstats version 1
[    1.233825] Loading compiled-in X.509 certificates
[    1.236687] Loaded X.509 cert 'Build time autogenerated kernel key: 9e1aeb581c5145b0cc48f50fdf6e09edec23120f'
[    1.236720] zswap: loaded using pool lzo/zbud
[    1.236849] Key type ._fscrypt registered
[    1.236850] Key type .fscrypt registered
[    1.247276] Key type big_key registered
[    1.252658] Key type encrypted registered
[    1.252661] AppArmor: AppArmor sha1 policy hashing enabled
[    1.252668] ima: No TPM chip found, activating TPM-bypass!
[    1.252674] ima: Allocated hash algorithm: sha1
[    1.252683] ima: No architecture policies found
[    1.252698] evm: Initialising EVM extended attributes:
[    1.252699] evm: security.selinux
[    1.252700] evm: security.SMACK64
[    1.252700] evm: security.SMACK64EXEC
[    1.252701] evm: security.SMACK64TRANSMUTE
[    1.252701] evm: security.SMACK64MMAP
[    1.252702] evm: security.apparmor
[    1.252703] evm: security.ima
[    1.252703] evm: security.capability
[    1.252704] evm: HMAC attrs: 0x1
[    1.253182] PM:   Magic number: 0:608:496
[    1.253351] rtc_cmos 00:03: setting system clock to 2020-08-22T19:27:09 UTC (1598124429)
[    1.254235] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    1.348463] ata1.00: ATAPI: Optiarc CD-RW CRX880A, KX07, max UDMA/33
[    1.354912] scsi 0:0:0:0: CD-ROM            Optiarc  CD-RW CRX880A    KX07 PQ: 0 ANSI: 5
[    1.410555] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.410556] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.410848] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.410987] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.412999] Freeing unused decrypted memory: 2040K
[    1.414136] Freeing unused kernel image memory: 2712K
[    1.424382] Write protecting the kernel read-only data: 22528k
[    1.425664] Freeing unused kernel image memory: 2008K
[    1.426415] Freeing unused kernel image memory: 1192K
[    1.439630] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.439666] x86/mm: Checking user space page tables
[    1.452355] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.452360] Run /init as init process
[    1.611188] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20190816/utaddress-204)
[    1.611196] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.611201] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190816/utaddress-204)
[    1.611204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.611205] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190816/utaddress-204)
[    1.611208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.611209] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.615156] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.618520] ahci 0000:00:1f.2: version 3.0
[    1.619908] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[    1.619910] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    1.621497] scsi host2: ahci
[    1.621656] scsi host3: ahci
[    1.627086] scsi host4: ahci
[    1.627167] ata3: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 29
[    1.627168] ata4: DUMMY
[    1.627169] ata5: DUMMY
[    1.668400] random: fast init done
[    1.669056] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.676450] firewire_ohci 0000:09:03.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.676567] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.676580] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.752388] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[    1.939809] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.941558] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.941560] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.941762] ata3.00: ATA-9: SAMSUNG MZ7LF128HCHP-00004, FXT0201Q, max UDMA/133
[    1.941764] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.942653] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[    1.942655] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.943124] ata3.00: configured for UDMA/133
[    1.943335] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG MZ7LF128 201Q PQ: 0 ANSI: 5
[    1.943783] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.943965] sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.944018] sd 2:0:0:0: [sda] Write Protect is off
[    1.944020] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.944108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.949424] usb 7-1: New USB device found, idVendor=044e, idProduct=3011, bcdDevice= 1.00
[    1.949426] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.949428] usb 7-1: Product: BCM2045B2
[    1.949429] usb 7-1: Manufacturer: Broadcom
[    1.951442] hub 7-1:1.0: USB hub found
[    1.953416] hub 7-1:1.0: 3 ports detected
[    1.957525]  sda: sda1 sda2 < sda5 sda6 >
[    1.958166] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.212535] firewire_core 0000:09:03.1: created device fw0: GUID 08004603029fd3e3, S400
[    2.248372] usb 7-1.1: new full-speed USB device number 3 using uhci_hcd
[    2.395426] usb 7-1.1: New USB device found, idVendor=044e, idProduct=3010, bcdDevice= 0.56
[    2.395428] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.395430] usb 7-1.1: Product: BCM2046 Bluetooth Device
[    2.395432] usb 7-1.1: Manufacturer: Broadcom Corp
[    2.395433] usb 7-1.1: SerialNumber: 001E3D897E4C
[    2.480387] usb 7-1.2: new full-speed USB device number 4 using uhci_hcd
[    2.584273] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
[    2.614430] usb 7-1.2: New USB device found, idVendor=044e, idProduct=3013, bcdDevice= 1.00
[    2.614432] usb 7-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.619728] hidraw: raw HID events driver (C) Jiri Kosina
[    2.623656] usbcore: registered new interface driver usbhid
[    2.623656] usbhid: USB HID core driver
[    2.626451] input: HID 044e:3013 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0/0003:044E:3013.0001/input/input5
[    2.684581] hid-generic 0003:044E:3013.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2/input0
[    2.696372] usb 7-1.3: new full-speed USB device number 5 using uhci_hcd
[    2.829438] usb 7-1.3: New USB device found, idVendor=044e, idProduct=3012, bcdDevice= 1.00
[    2.829440] usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.837017] input: HID 044e:3012 Mouse as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.3/7-1.3:1.0/0003:044E:3012.0002/input/input6
[    2.837156] hid-generic 0003:044E:3012.0002: input,hidraw1: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3/input0
[   98.319514] random: crng init done
[   98.319517] random: 7 urandom warning(s) missed due to ratelimiting
[ 1597.320702] cryptd: max_cpu_qlen set to 1000
[ 1597.568337] raid6: sse2x4   gen()  8225 MB/s
[ 1597.616353] raid6: sse2x4   xor()  6124 MB/s
[ 1597.664348] raid6: sse2x2   gen()  4793 MB/s
[ 1597.712338] raid6: sse2x2   xor()  5649 MB/s
[ 1597.760346] raid6: sse2x1   gen()  4020 MB/s
[ 1597.808341] raid6: sse2x1   xor()  4621 MB/s
[ 1597.808349] raid6: using algorithm sse2x4 gen() 8225 MB/s
[ 1597.808350] raid6: .... xor() 6124 MB/s, rmw enabled
[ 1597.808351] raid6: using ssse3x2 recovery algorithm
[ 1597.812134] xor: measuring software checksum speed
[ 1597.848366]    prefetch64-sse: 15477.000 MB/sec
[ 1597.888370]    generic_sse: 12994.000 MB/sec
[ 1597.888371] xor: using function: prefetch64-sse (15477.000 MB/sec)
[ 1597.912972] Btrfs loaded, crc32c=crc32c-generic
[ 1598.177037] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1598.561705] systemd[1]: Inserted module 'autofs4'
[ 1598.594196] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1598.612491] systemd[1]: Detected architecture x86-64.
[ 1598.630025] systemd[1]: Set hostname to <Lui>.
[ 1598.866150] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 1598.983720] systemd[1]: Created slice system-modprobe.slice.
[ 1598.984235] systemd[1]: Created slice Cryptsetup Units Slice.
[ 1598.984718] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1598.985233] systemd[1]: Created slice system-tor.slice.
[ 1598.985670] systemd[1]: Created slice User and Session Slice.
[ 1598.985770] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1598.986049] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1598.986203] systemd[1]: Reached target User and Group Name Lookups.
[ 1598.986253] systemd[1]: Reached target Remote File Systems.
[ 1598.986292] systemd[1]: Reached target Slices.
[ 1598.986432] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1598.986567] systemd[1]: Listening on LVM2 poll daemon socket.
[ 1598.988942] systemd[1]: Listening on Syslog Socket.
[ 1598.991773] systemd[1]: Listening on Process Core Dump Socket.
[ 1598.991899] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1598.992005] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 1598.992260] systemd[1]: Listening on Journal Audit Socket.
[ 1598.992410] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1598.992576] systemd[1]: Listening on Journal Socket.
[ 1598.992728] systemd[1]: Listening on udev Control Socket.
[ 1598.992846] systemd[1]: Listening on udev Kernel Socket.
[ 1598.994243] systemd[1]: Mounting Huge Pages File System...
[ 1598.995760] systemd[1]: Mounting POSIX Message Queue File System...
[ 1598.997394] systemd[1]: Mounting Kernel Debug File System...
[ 1598.999130] systemd[1]: Mounting Kernel Trace File System...
[ 1599.001452] systemd[1]: Starting Journal Service...
[ 1599.002987] systemd[1]: Starting Availability of block devices...
[ 1599.006780] systemd[1]: Starting Set the console keyboard layout...
[ 1599.010085] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 1599.013132] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 1599.018036] systemd[1]: Starting Load Kernel Module drm...
[ 1599.018815] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 1599.018894] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 1599.022509] systemd[1]: Starting Load Kernel Modules...
[ 1599.024074] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1599.028627] systemd[1]: Starting udev Coldplug all Devices...
[ 1599.036126] systemd[1]: Starting Uncomplicated firewall...
[ 1599.042320] systemd[1]: Mounted Huge Pages File System.
[ 1599.043742] systemd[1]: Mounted POSIX Message Queue File System.
[ 1599.044518] systemd[1]: Mounted Kernel Debug File System.
[ 1599.045300] systemd[1]: Mounted Kernel Trace File System.
[ 1599.048956] systemd[1]: Finished Availability of block devices.
[ 1599.052517] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 1599.060594] systemd[1]: Finished Uncomplicated firewall.
[ 1599.069102] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=60
[ 1599.079179] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 1599.080491] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 1599.080556] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 1599.081972] systemd[1]: Starting Load/Save Random Seed...
[ 1599.083430] systemd[1]: Starting Create System Users...
[ 1599.097351] systemd[1]: modprobe@drm.service: Succeeded.
[ 1599.097907] systemd[1]: Finished Load Kernel Module drm.
[ 1599.144028] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 1599.146449] lp: driver loaded but no devices found
[ 1599.157894] systemd[1]: Finished Load/Save Random Seed.
[ 1599.162651] systemd[1]: Finished Create System Users.
[ 1599.164262] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1599.174422] ppdev: user-space parallel port driver
[ 1599.184692] systemd[1]: Finished Load Kernel Modules.
[ 1599.186843] systemd[1]: Mounting FUSE Control File System...
[ 1599.188475] systemd[1]: Mounting Kernel Configuration File System...
[ 1599.194142] systemd[1]: Starting Apply Kernel Variables...
[ 1599.197114] systemd[1]: Mounted Kernel Configuration File System.
[ 1599.201996] systemd[1]: Mounted FUSE Control File System.
[ 1599.207170] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 1599.209752] systemd[1]: Starting udev Kernel Device Manager...
[ 1599.232319] systemd[1]: Finished Apply Kernel Variables.
[ 1599.346275] systemd[1]: Finished Set the console keyboard layout.
[ 1599.346609] systemd[1]: Reached target Local File Systems (Pre).
[ 1599.364032] systemd[1]: Finished udev Coldplug all Devices.
[ 1599.366876] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 1599.376722] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 1599.402348] systemd[1]: Started udev Kernel Device Manager.
[ 1599.403975] systemd[1]: Starting Show Plymouth Boot Screen...
[ 1599.431330] systemd[1]: plymouth-start.service: Succeeded.
[ 1599.432153] systemd[1]: Started Show Plymouth Boot Screen.
[ 1599.432481] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 1599.432678] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 1599.444032] systemd[1]: Started Journal Service.
[ 1599.457124] systemd-journald[468]: Received client request to flush runtime journal.
[ 1600.263023] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input8
[ 1600.322364] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input9
[ 1600.399197] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1600.419147] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1600.500359] tifm_core: MMC/SD card detected in socket 0:1
[ 1600.507053] sony_laptop: SNC setup done.
[ 1600.531004] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
[ 1600.531027] yenta_cardbus 0000:09:03.0: Enabling burst memory read transactions
[ 1600.531034] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
[ 1600.531036] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
[ 1600.531043] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
[ 1600.580395] nvidia: loading out-of-tree module taints kernel.
[ 1600.580405] nvidia: module license 'NVIDIA' taints kernel.
[ 1600.580406] Disabling lock debugging due to kernel taint
[ 1600.658058] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1600.679875] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 1600.683420] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 1600.683430] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.108  Wed Dec 11 11:06:58 PST 2019
[ 1600.692386] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 1600.692387] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 1600.692456] iwl4965 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1600.700236] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 1600.743124] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 1600.747110] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 1600.753178] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24
[ 1600.753398] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 1600.777274] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 1600.777280] yenta_cardbus 0000:09:03.0: Socket status: 30000006
[ 1600.777286] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[ 1600.777288] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc000000-0xfc0fffff]
[ 1600.777290] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc000000-0xfc0fffff:
[ 1600.777293]  excluding 0xfc000000-0xfc00ffff
[ 1601.057128] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1601.103761] intel_powerclamp: No package C-state available
[ 1601.137309] intel_powerclamp: No package C-state available
[ 1601.345146] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9872AK: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:speaker
[ 1601.345150] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1601.345151] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 1601.345153] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[ 1601.345154] snd_hda_codec_idt hdaudioC0D0:    dig-out=0x11/0x0
[ 1601.345155] snd_hda_codec_idt hdaudioC0D0:    inputs:
[ 1601.345157] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x14
[ 1601.345159] snd_hda_codec_idt hdaudioC0D0:      Mic=0xd
[ 1601.376239] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1601.376314] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1601.388411] Adding 999420k swap on /dev/mapper/yyy-swap_1.  Priority:-2 extents:1 across:999420k SSFS
[ 1601.579029] audit: type=1400 audit(1598126029.819:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=773 comm="apparmor_parser"
[ 1601.579034] audit: type=1400 audit(1598126029.819:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=773 comm="apparmor_parser"
[ 1601.579037] audit: type=1400 audit(1598126029.819:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=773 comm="apparmor_parser"
[ 1601.582261] audit: type=1400 audit(1598126029.823:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=772 comm="apparmor_parser"
[ 1601.582265] audit: type=1400 audit(1598126029.823:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=772 comm="apparmor_parser"
[ 1601.589863] audit: type=1400 audit(1598126029.831:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=774 comm="apparmor_parser"
[ 1601.593816] audit: type=1400 audit(1598126029.835:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_ttu" pid=775 comm="apparmor_parser"
[ 1601.602599] audit: type=1400 audit(1598126029.843:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=776 comm="apparmor_parser"
[ 1601.602603] audit: type=1400 audit(1598126029.843:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=776 comm="apparmor_parser"
[ 1601.606146] audit: type=1400 audit(1598126029.847:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=777 comm="apparmor_parser"
[ 1601.869635] iwl4965 0000:06:00.0 wlp6s0: renamed from wlan0
[ 1602.199566] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 1602.199575]  excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 1602.199602] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 1602.199612]  excluding 0xa0000000-0xa0ffffff
[ 1602.199631] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 1602.199640]  excluding 0x60000000-0x60ffffff
[ 1602.434147] zram: Added device: zram0
[ 1602.434280] zram: Added device: zram1
[ 1602.478232] zram0: detected capacity change from 0 to 1031557120
[ 1602.544668] Adding 1007376k swap on /dev/zram0.  Priority:5 extents:1 across:1007376k SSFS
[ 1602.552160] zram1: detected capacity change from 0 to 1031557120
[ 1602.612582] Adding 1007376k swap on /dev/zram1.  Priority:5 extents:1 across:1007376k SSFS
[ 1602.704752] nvidia_uvm: Loaded the UVM driver, major device number 240
[ 1603.071924] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1603.072121] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 1604.393181] NVRM: Your system is not currently configured to drive a VGA console
[ 1604.393184] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 1604.393185] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 1604.393186] NVRM: drivers including, but not limited to, vesafb, may result in
[ 1604.393186] NVRM: corruption and stability problems, and is not supported.
[ 1605.467452] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 1605.467677] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 1606.797563] wlp6s0: authenticate with 30:7e:cb:b1:5e:ec
[ 1606.815199] wlp6s0: send auth to 30:7e:cb:b1:5e:ec (try 1/3)
[ 1606.817022] wlp6s0: authenticated
[ 1606.817160] wlp6s0: waiting for beacon from 30:7e:cb:b1:5e:ec
[ 1606.860384] wlp6s0: associate with 30:7e:cb:b1:5e:ec (try 1/3)
[ 1606.864067] wlp6s0: RX AssocResp from 30:7e:cb:b1:5e:ec (capab=0x411 status=0 aid=2)
[ 1606.890536] wlp6s0: associated
[ 1607.058728] bpfilter: Loaded bpfilter_umh pid 1225
[ 1607.059104] Started bpfilter
[ 1607.100961] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[ 1607.101913] iwl4965 0000:06:00.0: Enabling power save might cause firmware crashes
[ 1607.478675] Bluetooth: Core ver 2.22
[ 1607.478700] NET: Registered protocol family 31
[ 1607.478701] Bluetooth: HCI device and connection manager initialized
[ 1607.478706] Bluetooth: HCI socket layer initialized
[ 1607.478710] Bluetooth: L2CAP socket layer initialized
[ 1607.478714] Bluetooth: SCO socket layer initialized
[ 1607.550339] usbcore: registered new interface driver btusb
[ 1607.568701] usb 7-1.2: input irq status -75 received
[ 1607.584701] usb 7-1.2: input irq status -75 received
[ 1607.600703] usb 7-1.2: input irq status -75 received
[ 1607.616702] usb 7-1.2: input irq status -75 received
[ 1607.632703] usb 7-1.2: input irq status -75 received
[ 1607.648699] usb 7-1.2: input irq status -75 received
[ 1607.664709] usb 7-1.2: input irq status -75 received
[ 1607.680708] usb 7-1.2: input irq status -75 received
[ 1607.696713] usb 7-1.2: input irq status -75 received
[ 1607.712709] usb 7-1.2: input irq status -75 received
[ 1607.728709] usb 7-1.2: input irq status -75 received
[ 1607.744711] usb 7-1.2: input irq status -75 received
[ 1607.760710] usb 7-1.2: input irq status -75 received
[ 1607.776711] usb 7-1.2: input irq status -75 received
[ 1608.750577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1608.750579] Bluetooth: BNEP filters: protocol multicast
[ 1608.750584] Bluetooth: BNEP socket layer initialized
[ 1608.875336] Bluetooth: RFCOMM TTY layer initialized
[ 1608.875350] Bluetooth: RFCOMM socket layer initialized
[ 1608.875357] Bluetooth: RFCOMM ver 1.11
[ 3471.088439] perf: interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 3816.192387] CE: hpet increased min_delta_ns to 20115 nsec
[ 5181.648860] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 5181.649110] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 5184.052226] perf: interrupt took too long (3162 > 3156), lowering kernel.perf_event_max_sample_rate to 63250
[ 5251.101568] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 5251.101756] caller os_map_kernel_space+0x6d/0xb0 [nvidia] mapping multiple BARs
[ 5740.463722] perf: interrupt took too long (3979 > 3952), lowering kernel.perf_event_max_sample_rate to 50250
[10106.272445] usb 1-2: new high-speed USB device number 3 using ehci-pci
[10106.828437] usb 1-2: device not accepting address 3, error -71
[10939.123013] PM: suspend entry (deep)
[10939.161630] Filesystems sync: 0.038 seconds
[10941.315425] Freezing user space processes ... (elapsed 0.057 seconds) done.
[10941.372735] OOM killer disabled.
[10941.372738] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10941.374256] printk: Suspending console(s) (use no_console_suspend to debug)
[10941.375050] wlp6s0: deauthenticating from 30:cb:b1:e:c by local choice (Reason: 3=DEAUTH_LEAVING)
[10941.417265] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[10941.420004] sd 2:0:0:0: [sda] Stopping disk
[10941.484422] ACPI: EC: interrupt blocked
[10941.506692] ACPI: Preparing to enter system sleep state S3
[10941.516002] ACPI: EC: event blocked
[10941.516005] ACPI: EC: EC stopped
[10941.516007] PM: Saving platform NVS memory
[10941.516071] Disabling non-boot CPUs ...
[10941.516987] IRQ 32: no longer affine to CPU1
[10941.518033] smpboot: CPU 1 is now offline
[10941.526293] ACPI: Low-level resume complete
[10941.526293] ACPI: EC: EC started
[10941.526293] PM: Restoring platform NVS memory
[10941.532408] Enabling non-boot CPUs ...
[10941.532497] x86: Booting SMP configuration:
[10941.532498] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10941.518002] microcode: sig=0x10676, pf=0x80, revision=0x607
[10941.518002] microcode: updated to revision 0x60f, date = 2010-09-29
[10941.546025] CPU1 is up
[10941.548967] ACPI: Waking up from system sleep state S3
[10941.557646] ACPI: EC: interrupt unblocked
[10941.579923] usb usb3: root hub lost power or was reset
[10941.580870] usb usb4: root hub lost power or was reset
[10941.582455] usb usb5: root hub lost power or was reset
[10941.582638] usb usb6: root hub lost power or was reset
[10941.582816] usb usb7: root hub lost power or was reset
[10941.594132] sd 2:0:0:0: [sda] Starting disk
[10941.603309] ACPI: EC: event unblocked
[10941.754550] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[10941.754553] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[10941.909416] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10941.909908] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[10941.909911] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10941.910970] ata3.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[10941.910972] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[10941.911436] ata3.00: configured for UDMA/133
[10941.936432] usb 7-1: reset full-speed USB device number 2 using uhci_hcd
[10942.144445] firewire_core 0000:09:03.1: rediscovered device fw0
[10942.404416] usb 7-1.1: reset full-speed USB device number 3 using uhci_hcd
[10942.600415] usb 7-1.2: reset full-speed USB device number 4 using uhci_hcd
[10942.796404] usb 7-1.3: reset full-speed USB device number 5 using uhci_hcd
[10943.149220] OOM killer enabled.
[10943.149223] Restarting tasks ... done.
[10943.190800] usb 7-1.2: input irq status -75 received
[10943.206797] usb 7-1.2: input irq status -75 received
[10943.223009] usb 7-1.2: input irq status -75 received
[10943.238843] usb 7-1.2: input irq status -75 received
[10943.254962] usb 7-1.2: input irq status -75 received
[10943.264662] PM: suspend exit
[10943.270793] usb 7-1.2: input irq status -75 received
[10943.286808] usb 7-1.2: input irq status -75 received
[10943.302793] usb 7-1.2: input irq status -75 received
[10943.318804] usb 7-1.2: input irq status -75 received
[10943.334791] usb 7-1.2: input irq status -75 received
[10943.350799] usb 7-1.2: input irq status -75 received
[10943.366795] usb 7-1.2: input irq status -75 received
[10943.382799] usb 7-1.2: input irq status -75 received
[10943.398807] usb 7-1.2: input irq status -75 received
[10948.866348] wlp6s0: authenticate with 3:ec
[10948.884232] wlp6s0: send auth to 30:7e:ec (try 1/3)
[10948.886093] wlp6s0: authenticated
[10948.886440] wlp6s0: waiting for beacon from 30:7e5e:ec
[10948.948392] wlp6s0: associate with 30:ec (try 1/3)
[10948.952016] wlp6s0: RX AssocResp from 3e:ec (capab=0x411 status=0 aid=2)
[10948.979329] wlp6s0: associated
[10949.986768] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[15868.492380] usb 1-2: new high-speed USB device number 6 using ehci-pci
[15868.660836] usb 1-2: device descriptor read/all, error -71
[15869.488402] usb 1-2: new high-speed USB device number 7 using ehci-pci
[15869.648324] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[15869.648357] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[15870.766112] mc: Linux media interface: v0.10
[15870.823592] videodev: Linux video capture interface: v2.00
[15870.914646] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[15870.924572] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[15870.924581] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[15870.924586] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[15870.924868] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
[15870.925237] usbcore: registered new interface driver uvcvideo
[15870.925240] USB Video Class driver (1.1.1)
[15871.305923] usbcore: deregistering interface driver uvcvideo
[15871.407485] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[15871.407632] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[15871.407710] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[15871.407784] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[15871.407869] uvcvideo: Unknown symbol vb2_poll (err -2)
[15871.407966] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[15871.408058] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[15871.408140] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[15871.408233] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[15871.408418] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[15871.444763] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[15871.444843] uvcvideo: Unknown symbol vb2_streamon (err -2)
[15871.444940] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[15871.445005] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[15871.445074] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[15871.445140] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[15871.445204] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[15871.445297] uvcvideo: Unknown symbol vb2_buffer_done (err -2)
[15871.445363] uvcvideo: Unknown symbol vb2_plane_vaddr (err -2)
[15871.445476] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[15871.445542] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[15871.445614] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[15871.445742] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[15871.445829] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[15871.445894] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[15871.445958] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[15871.446036] uvcvideo: Unknown symbol vb2_mmap (err -2)
[15871.446140] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[15871.692058] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[15871.707059] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[15871.707066] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[15871.707072] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[15871.707863] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13
[15871.740442] usbcore: registered new interface driver uvcvideo
[15871.740447] USB Video Class driver (1.1.1)
[15877.964397] usb 1-2: reset high-speed USB device number 7 using ehci-pci
[16116.736460] usb 1-2: USB disconnect, device number 7
[29451.364379] usb 1-2: new high-speed USB device number 8 using ehci-pci
[29451.916373] usb 1-2: device not accepting address 8, error -71
[29481.136436] usb 1-2: new high-speed USB device number 10 using ehci-pci
[29481.688437] usb 1-2: device not accepting address 10, error -71
[29496.028446] usb 1-2: new high-speed USB device number 12 using ehci-pci
[29496.188320] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[29496.188326] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[29496.191340] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[29496.195187] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[29496.195560] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[29496.195568] uvcvideo: Failed to initialize the device (-5).
[29497.280657] usbcore: deregistering interface driver uvcvideo
[29497.437325] mc: Linux media interface: v0.10
[29497.463513] videodev: Linux video capture interface: v2.00
[29497.495515] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[29497.499330] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[29497.499336] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[29497.499342] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[29497.499634] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input14
[29497.500004] usbcore: registered new interface driver uvcvideo
[29497.500007] USB Video Class driver (1.1.1)
[29497.859656] usbcore: deregistering interface driver uvcvideo
[29498.001942] mc: Linux media interface: v0.10
[29498.040716] videodev: Linux video capture interface: v2.00
[29498.078622] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[29498.083260] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[29498.083267] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[29498.083272] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[29498.083564] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input15
[29498.083926] usbcore: registered new interface driver uvcvideo
[29498.083929] USB Video Class driver (1.1.1)
[29509.048461] usb 2-2: new high-speed USB device number 3 using ehci-pci
[29509.208149] usb 2-2: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[29509.208155] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29509.208160] usb 2-2: Product: DataTraveler 2.0
[29509.208165] usb 2-2: Manufacturer: Kingston
[29509.208170] usb 2-2: SerialNumber: 50E5495131F7FA9D
[29509.956878] usb-storage 2-2:1.0: USB Mass Storage device detected
[29509.962432] scsi host5: usb-storage 2-2:1.0
[29509.962778] usbcore: registered new interface driver usb-storage
[29509.983858] usbcore: registered new interface driver uas
[29511.007026] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[29511.007755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[29511.008569] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[29511.009297] sd 5:0:0:0: [sdb] Write Protect is off
[29511.009304] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[29511.009924] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[29511.033072]  sdb: sdb1
[29511.036805] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[29511.859417] usb 2-2: USB disconnect, device number 3
[29512.512405] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[29512.648402] usb 5-2: device descriptor read/64, error -71
[29512.892392] usb 5-2: device descriptor read/64, error -71
[29512.943216] show_signal_msg: 15 callbacks suppressed
[29512.943223] csd-automount[4891]: segfault at 8 ip 000055e630ed7430 sp 00007ffcbef93050 error 4 in csd-automount[55e630ed5000+5000]
[29512.943244] Code: 31 00 00 49 89 c6 e8 bf eb ff ff 4c 89 f6 4c 89 f7 49 89 c4 e8 77 ee ff ff 48 8b 04 24 4c 89 e7 <48>  ff ff 4c 89 e7 e8 5f ee ff ff 48 8b 3c 24 e8
[29513.132389] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[29513.272398] usb 5-2: device descriptor read/64, error -71
[29513.516390] usb 5-2: device descriptor read/64, error -71
[29513.624465] usb usb5-port2: attempt power cycle
[29513.624489] usb usb5-port2: failed to disable port power
[29513.752388] usb 5-2: new full-speed USB device number 4 using uhci_hcd
[29514.172404] usb 5-2: device not accepting address 4, error -71
[29514.300571] usb 5-2: new full-speed USB device number 5 using uhci_hcd
[29514.724366] usb 5-2: device not accepting address 5, error -71
[29514.724438] usb usb5-port2: unable to enumerate USB device
[29537.764415] usb 2-2: new high-speed USB device number 6 using ehci-pci
[29537.924175] usb 2-2: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[29537.924182] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[29537.924188] usb 2-2: Product: DataTraveler 2.0
[29537.924193] usb 2-2: Manufacturer: Kingston
[29537.924197] usb 2-2: SerialNumber: 50E5495950FA9D
[29537.926521] usb-storage 2-2:1.0: USB Mass Storage device detected
[29537.929857] scsi host5: usb-storage 2-2:1.0
[29538.962624] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[29538.963497] sd 5:0:0:0: Attached scsi generic sg2 type 0
[29538.964189] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[29538.964820] sd 5:0:0:0: [sdb] Write Protect is off
[29538.964826] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[29538.965440] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[29538.980964]  sdb: sdb1
[29538.983691] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[29758.233094] sr 0:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[29758.233103] sr 0:0:0:0: [sr0] tag#0 Sense Key : Not Ready [current] 
[29758.233111] sr 0:0:0:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed
[29758.233119] sr 0:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[29758.233127] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[29758.233249] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233257] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233266] Buffer I/O error on dev sr0, logical block 0, async page read
[29758.233324] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233331] blk_update_request: I/O error, dev sr0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233337] Buffer I/O error on dev sr0, logical block 1, async page read
[29758.233389] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233396] blk_update_request: I/O error, dev sr0, sector 2 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233401] Buffer I/O error on dev sr0, logical block 2, async page read
[29758.233452] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233458] blk_update_request: I/O error, dev sr0, sector 3 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233464] Buffer I/O error on dev sr0, logical block 3, async page read
[29758.233516] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233522] blk_update_request: I/O error, dev sr0, sector 4 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233528] Buffer I/O error on dev sr0, logical block 4, async page read
[29758.233770] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233777] blk_update_request: I/O error, dev sr0, sector 5 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233783] Buffer I/O error on dev sr0, logical block 5, async page read
[29758.233839] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233845] blk_update_request: I/O error, dev sr0, sector 6 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233851] Buffer I/O error on dev sr0, logical block 6, async page read
[29758.233902] sr 0:0:0:0: [sr0] tag#0 unaligned transfer
[29758.233909] blk_update_request: I/O error, dev sr0, sector 7 op 0x0:(READ) flags 0x0 phys_seg 2 prio class 0
[29758.233914] Buffer I/O error on dev sr0, logical block 7, async page read
[30081.539381] usb 2-2: USB disconnect, device number 6
[30081.543600] blk_update_request: I/O error, dev sdb, sector 2336 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[30081.543613] Buffer I/O error on dev sdb1, logical block 36, lost async page write
[30081.543640] blk_update_request: I/O error, dev sdb, sector 6293648 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[30081.543646] Buffer I/O error on dev sdb1, logical block 786450, lost async page write
[30081.911455] blk_update_request: I/O error, dev sdb, sector 870208 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
[30081.911482] blk_update_request: I/O error, dev sdb, sector 870448 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[30081.911562] blk_update_request: I/O error, dev sdb, sector 869952 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.911572] Buffer I/O error on dev sdb1, logical block 108488, async page read
[30081.925167] blk_update_request: I/O error, dev sdb, sector 870464 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[30081.925227] blk_update_request: I/O error, dev sdb, sector 870208 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.925236] Buffer I/O error on dev sdb1, logical block 108520, async page read
[30081.925567] blk_update_request: I/O error, dev sdb, sector 870704 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[30081.925626] blk_update_request: I/O error, dev sdb, sector 870464 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.925633] Buffer I/O error on dev sdb1, logical block 108552, async page read
[30081.925811] blk_update_request: I/O error, dev sdb, sector 870720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[30081.925819] Buffer I/O error on dev sdb1, logical block 108584, async page read
[30081.933973] Buffer I/O error on dev sdb1, logical block 108488, async page read
[30088.900446] usb 2-2: new high-speed USB device number 7 using ehci-pci
[30089.676378] usb 2-2: device descriptor read/64, error -71
[30090.128400] usb 5-2: new full-speed USB device number 6 using uhci_hcd
[30090.272417] usb 5-2: device descriptor read/64, error -71
[30090.528416] usb 5-2: device descriptor read/64, error -71
[30091.260423] usb 5-2: new full-speed USB device number 7 using uhci_hcd
[30091.396468] usb 5-2: device descriptor read/64, error -71
[30091.648453] usb 5-2: device descriptor read/64, error -71
[30091.760449] usb usb5-port2: attempt power cycle
[30091.760471] usb usb5-port2: failed to disable port power
[30091.892473] usb 5-2: new full-speed USB device number 8 using uhci_hcd
[30092.316404] usb 5-2: device not accepting address 8, error -71
[30092.444414] usb 5-2: new full-speed USB device number 9 using uhci_hcd
[30092.872375] usb 5-2: device not accepting address 9, error -71
[30092.872426] usb usb5-port2: unable to enumerate USB device
[30459.689739] CE: hpet increased min_delta_ns to 30172 nsec
[30552.352466] usb 1-2: USB disconnect, device number 12
[30553.584388] usb 1-2: new high-speed USB device number 13 using ehci-pci
[30553.744260] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[30553.744268] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30553.744927] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30553.746242] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30553.747867] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30553.747875] uvcvideo: Failed to initialize the device (-5).
[30554.772440] usb 5-2: new full-speed USB device number 10 using uhci_hcd
[30554.912393] usb 5-2: device descriptor read/64, error -71
[30555.160472] usb 5-2: device descriptor read/64, error -71
[30555.396419] usb 5-2: new full-speed USB device number 11 using uhci_hcd
[30555.422464] usb 1-2: USB disconnect, device number 13
[30555.532403] usb 5-2: device descriptor read/64, error -71
[30555.776435] usb 5-2: device descriptor read/64, error -71
[30555.884469] usb usb5-port2: attempt power cycle
[30555.884491] usb usb5-port2: failed to disable port power
[30556.016393] usb 5-2: new full-speed USB device number 12 using uhci_hcd
[30556.244393] usb 1-2: new high-speed USB device number 14 using ehci-pci
[30556.404422] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[30556.404430] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30556.405209] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30556.406509] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30556.406883] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30556.406891] uvcvideo: Failed to initialize the device (-5).
[30556.432393] usb 5-2: device not accepting address 12, error -71
[30556.560446] usb 5-2: new full-speed USB device number 13 using uhci_hcd
[30556.635102] usb 1-2: USB disconnect, device number 14
[30556.976429] usb 5-2: device not accepting address 13, error -71
[30556.976513] usb usb5-port2: unable to enumerate USB device
[30557.072386] usb 1-2: new high-speed USB device number 15 using ehci-pci
[30557.132453] usb 5-2: new full-speed USB device number 14 using uhci_hcd
[30557.236358] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[30557.236365] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[30557.237125] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30557.238451] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[30557.238828] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[30557.238836] uvcvideo: Failed to initialize the device (-5).
[30557.268388] usb 5-2: device descriptor read/64, error -71
[30557.512408] usb 5-2: device descriptor read/64, error -71
[30557.748409] usb 5-2: new full-speed USB device number 15 using uhci_hcd
[30557.884482] usb 5-2: device descriptor read/64, error -71
[30558.128430] usb 5-2: device descriptor read/64, error -71
[30558.236462] usb usb5-port2: attempt power cycle
[30558.236484] usb usb5-port2: failed to disable port power
[30558.368449] usb 5-2: new full-speed USB device number 16 using uhci_hcd
[30558.784445] usb 5-2: device not accepting address 16, error -71
[30558.912421] usb 5-2: new full-speed USB device number 17 using uhci_hcd
[30559.328440] usb 5-2: device not accepting address 17, error -71
[30559.328507] usb usb5-port2: unable to enumerate USB device
[30559.484412] usb 5-2: new full-speed USB device number 18 using uhci_hcd
[30559.620431] usb 5-2: device descriptor read/64, error -71
[30559.864450] usb 5-2: device descriptor read/64, error -71
[30560.104393] usb 5-2: new full-speed USB device number 19 using uhci_hcd
[30560.240407] usb 5-2: device descriptor read/64, error -71
[30560.486803] usb 5-2: device descriptor read/64, error -71
[30560.592452] usb usb5-port2: attempt power cycle
[30560.592476] usb usb5-port2: failed to disable port power
[30560.724390] usb 5-2: new full-speed USB device number 20 using uhci_hcd
[30561.144395] usb 5-2: device not accepting address 20, error -71
[30561.272402] usb 5-2: new full-speed USB device number 21 using uhci_hcd
[30561.688393] usb 5-2: device not accepting address 21, error -71
[30561.688465] usb usb5-port2: unable to enumerate USB device
[30562.013236] usbcore: deregistering interface driver uvcvideo
[30562.170554] mc: Linux media interface: v0.10
[30562.221845] videodev: Linux video capture interface: v2.00
[30562.313246] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30562.325516] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30562.325524] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30562.325529] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30562.327109] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input16
[30562.350997] usbcore: registered new interface driver uvcvideo
[30562.351001] USB Video Class driver (1.1.1)
[30563.523740] usbcore: deregistering interface driver uvcvideo
[30563.552548] usb 5-2: new full-speed USB device number 22 using uhci_hcd
[30563.688384] usb 5-2: device descriptor read/64, error -71
[30563.708468] mc: Linux media interface: v0.10
[30563.739409] videodev: Linux video capture interface: v2.00
[30563.775658] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30563.779478] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30563.779485] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30563.779490] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30563.779731] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input17
[30563.779956] usbcore: registered new interface driver uvcvideo
[30563.779959] USB Video Class driver (1.1.1)
[30563.940380] usb 5-2: device descriptor read/64, error -71
[30564.388381] usb 5-2: new full-speed USB device number 23 using uhci_hcd
[30564.532470] usb 5-2: device descriptor read/64, error -71
[30564.776462] usb 5-2: device descriptor read/64, error -71
[30564.884484] usb usb5-port2: attempt power cycle
[30564.884507] usb usb5-port2: failed to disable port power
[30565.012412] usb 5-2: new full-speed USB device number 24 using uhci_hcd
[30565.432463] usb 5-2: device not accepting address 24, error -71
[30565.560471] usb 5-2: new full-speed USB device number 25 using uhci_hcd
[30565.984465] usb 5-2: device not accepting address 25, error -71
[30565.984528] usb usb5-port2: unable to enumerate USB device
[30566.114018] usbcore: deregistering interface driver uvcvideo
[30566.140388] usb 5-2: new full-speed USB device number 26 using uhci_hcd
[30566.169284] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[30566.256959] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30566.261215] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30566.261222] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30566.261227] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30566.262205] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input18
[30566.264086] usbcore: registered new interface driver uvcvideo
[30566.264088] USB Video Class driver (1.1.1)
[30566.484389] usb 5-2: device descriptor read/64, error -71
[30566.728395] usb 5-2: device descriptor read/64, error -71
[30566.964487] usb 5-2: new full-speed USB device number 27 using uhci_hcd
[30567.100445] usb 5-2: device descriptor read/64, error -71
[30567.344485] usb 5-2: device descriptor read/64, error -71
[30567.452437] usb usb5-port2: attempt power cycle
[30567.452458] usb usb5-port2: failed to disable port power
[30567.580408] usb 5-2: new full-speed USB device number 28 using uhci_hcd
[30567.996483] usb 5-2: device not accepting address 28, error -71
[30568.124483] usb 5-2: new full-speed USB device number 29 using uhci_hcd
[30568.548499] usb 5-2: device not accepting address 29, error -71
[30568.548563] usb usb5-port2: unable to enumerate USB device
[30568.684898] usbcore: deregistering interface driver uvcvideo
[30568.712442] usb 5-2: new full-speed USB device number 30 using uhci_hcd
[30568.852382] usb 5-2: device descriptor read/64, error -71
[30568.862780] mc: Linux media interface: v0.10
[30568.889234] videodev: Linux video capture interface: v2.00
[30568.931221] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[30568.937841] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[30568.937848] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[30568.937854] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[30568.938907] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input19
[30568.944142] usbcore: registered new interface driver uvcvideo
[30568.944146] USB Video Class driver (1.1.1)
[30569.096412] usb 5-2: device descriptor read/64, error -71
[30569.332440] usb 5-2: new full-speed USB device number 31 using uhci_hcd
[30569.468389] usb 5-2: device descriptor read/64, error -71
[30569.712419] usb 5-2: device descriptor read/64, error -71
[30569.820470] usb usb5-port2: attempt power cycle
[30569.820492] usb usb5-port2: failed to disable port power
[30569.910928] usb 1-2: USB disconnect, device number 15
[30569.952401] usb 5-2: new full-speed USB device number 32 using uhci_hcd
[30570.368577] usb 5-2: device not accepting address 32, error -71
[30570.496401] usb 5-2: new full-speed USB device number 33 using uhci_hcd
[30570.916378] usb 5-2: device not accepting address 33, error -71
[30570.916446] usb usb5-port2: unable to enumerate USB device
[30571.076390] usb 5-2: new full-speed USB device number 34 using uhci_hcd
[30571.212397] usb 5-2: device descriptor read/64, error -71
[30571.460389] usb 5-2: device descriptor read/64, error -71
[30571.696454] usb 5-2: new full-speed USB device number 35 using uhci_hcd
[30571.836408] usb 5-2: device descriptor read/64, error -71
[30572.084545] usb 5-2: device descriptor read/64, error -71
[30572.192512] usb usb5-port2: attempt power cycle
[30572.192534] usb usb5-port2: failed to disable port power
[30572.324423] usb 5-2: new full-speed USB device number 36 using uhci_hcd
[30572.752398] usb 5-2: device not accepting address 36, error -71
[30572.880433] usb 5-2: new full-speed USB device number 37 using uhci_hcd
[30573.300381] usb 5-2: device not accepting address 37, error -71
[30573.300452] usb usb5-port2: unable to enumerate USB device
[31049.252429] usb 1-2: new high-speed USB device number 16 using ehci-pci
[31049.412399] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[31049.412406] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31049.413079] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31049.414346] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[31049.414748] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[31049.414756] uvcvideo: Failed to initialize the device (-5).
[31050.312433] usb 5-2: new full-speed USB device number 38 using uhci_hcd
[31050.448384] usb 5-2: device descriptor read/64, error -71
[31050.692424] usb 5-2: device descriptor read/64, error -71
[31050.928424] usb 5-2: new full-speed USB device number 39 using uhci_hcd
[31051.064422] usb 5-2: device descriptor read/64, error -71
[31051.308432] usb 5-2: device descriptor read/64, error -71
[31051.416471] usb usb5-port2: attempt power cycle
[31051.416492] usb usb5-port2: failed to disable port power
[31051.544444] usb 5-2: new full-speed USB device number 40 using uhci_hcd
[31051.960421] usb 5-2: device not accepting address 40, error -71
[31052.088407] usb 5-2: new full-speed USB device number 41 using uhci_hcd
[31052.512417] usb 5-2: device not accepting address 41, error -71
[31052.512468] usb usb5-port2: unable to enumerate USB device
[31052.676431] usb 5-2: new full-speed USB device number 42 using uhci_hcd
[31052.794186] usbcore: deregistering interface driver uvcvideo
[31052.812433] usb 5-2: device descriptor read/64, error -71
[31052.929769] mc: Linux media interface: v0.10
[31052.956007] videodev: Linux video capture interface: v2.00
[31052.987963] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31052.992259] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31052.992266] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31052.992271] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31052.992822] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input20
[31052.993189] usbcore: registered new interface driver uvcvideo
[31052.993191] USB Video Class driver (1.1.1)
[31053.064399] usb 5-2: device descriptor read/64, error -71
[31053.508430] usb 5-2: new full-speed USB device number 43 using uhci_hcd
[31053.852428] usb 5-2: device descriptor read/64, error -71
[31054.096421] usb 5-2: device descriptor read/64, error -71
[31054.204421] usb usb5-port2: attempt power cycle
[31054.204444] usb usb5-port2: failed to disable port power
[31054.332429] usb 5-2: new full-speed USB device number 44 using uhci_hcd
[31054.748428] usb 5-2: device not accepting address 44, error -71
[31055.088383] usb 5-2: new full-speed USB device number 45 using uhci_hcd
[31055.512428] usb 5-2: device not accepting address 45, error -71
[31055.512488] usb usb5-port2: unable to enumerate USB device
[31055.668485] usb 5-2: new full-speed USB device number 46 using uhci_hcd
[31055.704444] usbcore: deregistering interface driver uvcvideo
[31055.757194] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[31055.804448] usb 5-2: device descriptor read/64, error -71
[31055.845237] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31055.848782] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31055.848789] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31055.848794] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31055.849699] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input21
[31055.850889] usbcore: registered new interface driver uvcvideo
[31055.850892] USB Video Class driver (1.1.1)
[31056.048483] usb 5-2: device descriptor read/64, error -71
[31056.288394] usb 5-2: new full-speed USB device number 47 using uhci_hcd
[31056.428383] usb 5-2: device descriptor read/64, error -71
[31056.676385] usb 5-2: device descriptor read/64, error -71
[31056.784490] usb usb5-port2: attempt power cycle
[31056.784514] usb usb5-port2: failed to disable port power
[31056.916377] usb 5-2: new full-speed USB device number 48 using uhci_hcd
[31057.332392] usb 5-2: device not accepting address 48, error -71
[31057.460526] usb 5-2: new full-speed USB device number 49 using uhci_hcd
[31057.880380] usb 5-2: device not accepting address 49, error -71
[31057.880446] usb usb5-port2: unable to enumerate USB device
[31289.424440] usb 2-3: new high-speed USB device number 11 using ehci-pci
[31289.840436] usb 2-3: device descriptor read/64, error -71
[31290.784431] usb 2-3: device descriptor read/64, error -71
[31291.720425] usb 2-3: new high-speed USB device number 12 using ehci-pci
[31292.972422] usb 2-3: device descriptor read/64, error -71
[31293.500375] usb 2-3: device descriptor read/64, error -71
[31293.608453] usb usb2-port3: attempt power cycle
[31294.340581] usb 2-3: new high-speed USB device number 13 using ehci-pci
[31294.768423] usb 2-3: device not accepting address 13, error -71
[31295.172429] usb 2-3: new high-speed USB device number 14 using ehci-pci
[31295.204542] usb 2-3: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[31295.204549] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31295.204554] usb 2-3: Product: DataTraveler 2.0
[31295.204559] usb 2-3: Manufacturer: Kingston
[31295.204564] usb 2-3: SerialNumber: 50E549D
[31295.205294] usb-storage 2-3:1.0: USB Mass Storage device detected
[31295.212476] scsi host5: usb-storage 2-3:1.0
[31296.276844] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[31296.278755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[31296.279187] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[31296.279933] sd 5:0:0:0: [sdb] Write Protect is off
[31296.279940] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[31296.280553] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[31296.296958]  sdb: sdb1
[31296.299831] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[31309.984552] usb 1-2: USB disconnect, device number 16
[31382.876426] usb 1-2: new high-speed USB device number 17 using ehci-pci
[31383.040385] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[31383.040393] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[31383.041618] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31383.046446] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[31383.046823] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[31383.046831] uvcvideo: Failed to initialize the device (-5).
[31388.746182] usbcore: deregistering interface driver uvcvideo
[31388.888953] mc: Linux media interface: v0.10
[31388.929476] videodev: Linux video capture interface: v2.00
[31388.986660] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31388.989918] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31388.989925] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31388.989930] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31388.990851] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input22
[31388.999698] usbcore: registered new interface driver uvcvideo
[31388.999702] USB Video Class driver (1.1.1)
[31389.330789] usbcore: deregistering interface driver uvcvideo
[31389.441156] videobuf2_v4l2: Unknown symbol vb2_buffer_in_use (err -2)
[31389.441272] videobuf2_v4l2: Unknown symbol vb2_core_queue_init (err -2)
[31389.441341] videobuf2_v4l2: Unknown symbol vb2_verify_memory_type (err -2)
[31389.441408] videobuf2_v4l2: Unknown symbol vb2_core_reqbufs (err -2)
[31389.441475] videobuf2_v4l2: Unknown symbol vb2_core_expbuf (err -2)
[31389.441542] videobuf2_v4l2: Unknown symbol vb2_core_create_bufs (err -2)
[31389.441567] videobuf2_v4l2: Unknown symbol video_devdata (err -2)
[31389.441647] videobuf2_v4l2: Unknown symbol vb2_write (err -2)
[31389.441714] videobuf2_v4l2: Unknown symbol vb2_request_buffer_cnt (err -2)
[31389.441781] videobuf2_v4l2: Unknown symbol vb2_core_queue_release (err -2)
[31389.441798] videobuf2_v4l2: Unknown symbol v4l2_fh_release (err -2)
[31389.441809] videobuf2_v4l2: Unknown symbol v4l2_event_pending (err -2)
[31389.441885] videobuf2_v4l2: Unknown symbol vb2_core_prepare_buf (err -2)
[31389.441951] videobuf2_v4l2: Unknown symbol vb2_read (err -2)
[31389.442017] videobuf2_v4l2: Unknown symbol vb2_core_poll (err -2)
[31389.442084] videobuf2_v4l2: Unknown symbol vb2_core_streamon (err -2)
[31389.442152] videobuf2_v4l2: Unknown symbol vb2_core_querybuf (err -2)
[31389.442219] videobuf2_v4l2: Unknown symbol vb2_core_qbuf (err -2)
[31389.442299] videobuf2_v4l2: Unknown symbol vb2_mmap (err -2)
[31389.442410] videobuf2_v4l2: Unknown symbol vb2_core_dqbuf (err -2)
[31389.442480] videobuf2_v4l2: Unknown symbol vb2_core_streamoff (err -2)
[31389.571427] mc: Linux media interface: v0.10
[31389.633212] videodev: Linux video capture interface: v2.00
[31389.718324] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[31389.721578] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[31389.721585] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[31389.721590] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[31389.728935] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input23
[31389.730414] usbcore: registered new interface driver uvcvideo
[31389.730417] USB Video Class driver (1.1.1)
[32085.196525] usb 1-2: USB disconnect, device number 17
[32086.100540] usb 1-2: new high-speed USB device number 18 using ehci-pci
[32086.260329] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32086.260365] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32086.261337] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32086.266287] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32086.266698] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32086.266706] uvcvideo: Failed to initialize the device (-5).
[32087.364041] usbcore: deregistering interface driver uvcvideo
[32087.513195] mc: Linux media interface: v0.10
[32087.548132] videodev: Linux video capture interface: v2.00
[32087.611590] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32087.615043] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32087.615050] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32087.615056] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32087.615301] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input24
[32087.615531] usbcore: registered new interface driver uvcvideo
[32087.615533] USB Video Class driver (1.1.1)
[32087.850478] usbcore: deregistering interface driver uvcvideo
[32087.948951] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[32087.949027] uvcvideo: Unknown symbol v4l2_fh_exit (err -2)
[32087.949120] uvcvideo: Unknown symbol video_ioctl2 (err -2)
[32087.949230] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[32087.950903] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[32087.950971] uvcvideo: Unknown symbol v4l2_format_info (err -2)
[32087.951039] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[32087.951652] uvcvideo: Unknown symbol vb2_poll (err -2)
[32087.951732] uvcvideo: Unknown symbol v4l2_fh_del (err -2)
[32087.951797] uvcvideo: Unknown symbol v4l2_fh_add (err -2)
[32087.951863] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[32087.951948] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[32087.952023] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[32087.952089] uvcvideo: Unknown symbol v4l2_subdev_init (err -2)
[32087.952153] uvcvideo: Unknown symbol v4l2_fh_open (err -2)
[32087.952230] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[32087.952302] uvcvideo: Unknown symbol v4l2_device_register_subdev (err -2)
[32087.952472] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[32087.965007] usb 1-2: USB disconnect, device number 18
[32087.994394] uvcvideo: Unknown symbol video_devdata (err -2)
[32087.994464] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[32087.994539] uvcvideo: Unknown symbol vb2_streamon (err -2)
[32087.994604] uvcvideo: Unknown symbol v4l2_ctrl_replace (err -2)
[32087.994672] uvcvideo: Unknown symbol v4l2_type_names (err -2)
[32087.994750] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[32087.994815] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[32087.994883] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[32087.994947] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[32087.995011] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[32087.995101] uvcvideo: Unknown symbol vb2_buffer_done (err -2)
[32087.995165] uvcvideo: Unknown symbol vb2_plane_vaddr (err -2)
[32087.995230] uvcvideo: Unknown symbol v4l2_fh_init (err -2)
[32087.995302] uvcvideo: Unknown symbol video_unregister_device (err -2)
[32087.995366] uvcvideo: Unknown symbol v4l2_prio_init (err -2)
[32087.995437] uvcvideo: Unknown symbol v4l2_event_subscribe (err -2)
[32087.995507] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[32087.995571] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[32087.995642] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[32087.995718] uvcvideo: Unknown symbol v4l2_device_register (err -2)
[32087.995799] uvcvideo: Unknown symbol v4l2_ctrl_merge (err -2)
[32087.995900] uvcvideo: Unknown symbol __video_register_device (err -2)
[32087.995965] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[32087.996048] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[32087.996113] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[32087.996177] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[32087.996244] uvcvideo: Unknown symbol v4l2_device_unregister (err -2)
[32087.996311] uvcvideo: Unknown symbol vb2_mmap (err -2)
[32087.996447] uvcvideo: Unknown symbol v4l2_event_queue_fh (err -2)
[32088.006923] uvcvideo: Unknown symbol v4l2_event_unsubscribe (err -2)
[32088.006998] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[32088.098046] videodev: Linux video capture interface: v2.00
[32088.162396] usbcore: registered new interface driver uvcvideo
[32088.162400] USB Video Class driver (1.1.1)
[32088.380472] usb 1-2: new high-speed USB device number 19 using ehci-pci
[32088.540318] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32088.540326] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32088.543474] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32088.544779] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32088.545159] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32088.545167] uvcvideo: Failed to initialize the device (-5).
[32088.598646] usb 1-2: USB disconnect, device number 19
[32089.016432] usb 1-2: new high-speed USB device number 20 using ehci-pci
[32089.176320] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32089.176328] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32089.178989] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32089.180943] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32089.181346] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32089.181354] uvcvideo: Failed to initialize the device (-5).
[32090.242229] usbcore: deregistering interface driver uvcvideo
[32090.421276] mc: Linux media interface: v0.10
[32090.481080] videodev: Linux video capture interface: v2.00
[32090.550047] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32090.553743] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32090.553750] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32090.553755] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32090.554605] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input25
[32090.564723] usbcore: registered new interface driver uvcvideo
[32090.564728] USB Video Class driver (1.1.1)
[32090.818417] usbcore: deregistering interface driver uvcvideo
[32090.868755] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[32090.868845] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[32090.868862] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[32090.868876] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[32090.868898] uvcvideo: Unknown symbol vb2_poll (err -2)
[32090.868932] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[32090.868978] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[32090.868999] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[32090.869030] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[32090.869074] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[32090.869096] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[32090.869110] uvcvideo: Unknown symbol vb2_streamon (err -2)
[32090.869144] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[32090.869151] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[32090.869162] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[32090.869169] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[32090.869176] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[32090.869267] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[32090.869275] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[32090.869349] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[32090.869375] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[32090.869383] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[32090.869390] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[32090.869575] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[32091.004636] mc: Linux media interface: v0.10
[32091.040904] videodev: Linux video capture interface: v2.00
[32091.085834] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32091.089548] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32091.089555] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32091.089560] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32091.090310] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input26
[32091.090671] usbcore: registered new interface driver uvcvideo
[32091.090674] USB Video Class driver (1.1.1)
[32092.076299] usbcore: deregistering interface driver uvcvideo
[32092.266186] mc: Linux media interface: v0.10
[32092.301675] videodev: Linux video capture interface: v2.00
[32092.346590] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32092.349212] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32092.349219] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32092.349224] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32092.349755] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input27
[32092.350169] usbcore: registered new interface driver uvcvideo
[32092.350171] USB Video Class driver (1.1.1)
[32092.509641] usbcore: deregistering interface driver uvcvideo
[32092.644635] videobuf2_common: Unknown symbol media_request_object_init (err -2)
[32092.644728] videobuf2_common: Unknown symbol media_request_object_unbind (err -2)
[32092.644869] videobuf2_common: Unknown symbol media_request_object_put (err -2)
[32092.644958] videobuf2_common: Unknown symbol v4l_vb2q_enable_media_source (err -2)
[32092.660576] videobuf2_common: Unknown symbol media_request_put (err -2)
[32092.660667] videobuf2_common: Unknown symbol media_request_object_bind (err -2)
[32092.695074] mc: Linux media interface: v0.10
[32092.744147] videodev: Linux video capture interface: v2.00
[32092.795446] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32092.804376] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32092.804382] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32092.804388] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32092.804672] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input28
[32092.805030] usbcore: registered new interface driver uvcvideo
[32092.805032] USB Video Class driver (1.1.1)
[32618.172503] usb 1-2: USB disconnect, device number 20
[32619.968449] usb 1-2: new high-speed USB device number 22 using ehci-pci
[32620.140448] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[32620.140771] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[32620.141472] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32620.145404] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[32620.145780] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[32620.145788] uvcvideo: Failed to initialize the device (-5).
[32621.225591] usbcore: deregistering interface driver uvcvideo
[32621.384587] mc: Linux media interface: v0.10
[32621.430686] videodev: Linux video capture interface: v2.00
[32621.481221] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32621.487076] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32621.487083] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32621.487088] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32621.487371] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input29
[32621.487740] usbcore: registered new interface driver uvcvideo
[32621.487742] USB Video Class driver (1.1.1)
[32621.740049] usbcore: deregistering interface driver uvcvideo
[32621.798482] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[32621.798566] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[32621.798582] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[32621.798596] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[32621.798618] uvcvideo: Unknown symbol vb2_poll (err -2)
[32621.798651] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[32621.798676] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[32621.798696] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[32621.798727] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[32621.798770] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[32621.798790] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[32621.798804] uvcvideo: Unknown symbol vb2_streamon (err -2)
[32621.798838] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[32621.798844] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[32621.798855] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[32621.798862] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[32621.798869] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[32621.798957] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[32621.798965] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[32621.799036] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[32621.799062] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[32621.799069] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[32621.799077] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[32621.799137] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[32621.991266] mc: Linux media interface: v0.10
[32622.029340] videodev: Linux video capture interface: v2.00
[32622.094563] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[32622.103700] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[32622.103707] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[32622.103713] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[32622.108804] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input30
[32622.109926] usbcore: registered new interface driver uvcvideo
[32622.109929] USB Video Class driver (1.1.1)
[33022.800395]  sdb:
[33023.166724]  sdb: sdb1
[33047.327866] usb 2-3: USB disconnect, device number 14
[33050.344399] usb 2-3: new high-speed USB device number 15 using ehci-pci
[33050.692398] usb 2-3: device descriptor read/64, error -71
[33050.960166] usb 2-3: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[33050.960172] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33050.960177] usb 2-3: Product: DataTraveler 2.0
[33050.960182] usb 2-3: Manufacturer: Kingston
[33050.960187] usb 2-3: SerialNumber: 50E549550FA9D
[33050.961777] usb-storage 2-3:1.0: USB Mass Storage device detected
[33050.962366] scsi host5: usb-storage 2-3:1.0
[33051.986370] usb 2-3: USB disconnect, device number 15
[33052.284394] usb 2-3: new high-speed USB device number 16 using ehci-pci
[33052.636388] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[33053.010480] usb 6-1: not running at top speed; connect to a high speed hub
[33053.042463] usb 6-1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[33053.042469] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33053.042474] usb 6-1: Product: DataTraveler 2.0
[33053.042479] usb 6-1: Manufacturer: Kingston
[33053.042484] usb 6-1: SerialNumber: 50E549550FA9D
[33053.046576] usb-storage 6-1:1.0: USB Mass Storage device detected
[33053.050686] scsi host5: usb-storage 6-1:1.0
[33054.208473] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
[33054.344489] usb 6-1: device descriptor read/64, error -71
[33055.224783] usb 6-1: USB disconnect, device number 2
[33060.572463] PM: suspend_common(): ehci_suspend+0x0/0xf0 returns -16
[33062.576417] usb 2-3: new high-speed USB device number 18 using ehci-pci
[33062.924404] usb 2-3: device descriptor read/64, error -71
[33063.384405] usb 2-3: device descriptor read/64, error -71
[33064.728509] usb 2-3: new high-speed USB device number 19 using ehci-pci
[33102.336440] usb 6-1: new full-speed USB device number 3 using uhci_hcd
[33102.472435] usb 6-1: device descriptor read/64, error -71
[33102.716432] usb 6-1: device descriptor read/64, error -71
[33102.952430] usb 6-1: new full-speed USB device number 4 using uhci_hcd
[33103.296431] usb 6-1: device descriptor read/64, error -71
[33103.540430] usb 6-1: device descriptor read/64, error -71
[33103.648463] usb usb6-port1: attempt power cycle
[33103.648484] usb usb6-port1: failed to disable port power
[33103.776431] usb 6-1: new full-speed USB device number 5 using uhci_hcd
[33104.192433] usb 6-1: device not accepting address 5, error -71
[33104.320438] usb 6-1: new full-speed USB device number 6 using uhci_hcd
[33104.736434] usb 6-1: device not accepting address 6, error -71
[33104.736479] usb usb6-port1: unable to enumerate USB device
[33113.016429] usb 6-1: new full-speed USB device number 7 using uhci_hcd
[33113.182539] usb 6-1: not running at top speed; connect to a high speed hub
[33113.214536] usb 6-1: New USB device found, idVendor=0951, idProduct=1665, bcdDevice= 1.00
[33113.214543] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33113.214548] usb 6-1: Product: DataTraveler 2.0
[33113.214553] usb 6-1: Manufacturer: Kingston
[33113.214557] usb 6-1: SerialNumber: 50E5495130FA9D
[33113.217674] usb-storage 6-1:1.0: USB Mass Storage device detected
[33113.218312] scsi host5: usb-storage 6-1:1.0
[33114.258589] scsi 5:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
[33114.259430] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33114.263551] sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB)
[33114.266542] sd 5:0:0:0: [sdb] Write Protect is off
[33114.266549] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
[33114.269544] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[33114.313580]  sdb: sdb1
[33114.324552] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33129.804607] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[33129.804618] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 0a 08 00 00 f0 00
[33129.804623] print_req_error: 1 callbacks suppressed
[33129.804630] blk_update_request: I/O error, dev sdb, sector 2568 op 0x0:(READ) flags 0x84700 phys_seg 30 prio class 0
[33129.804731] usb 6-1: USB disconnect, device number 7
[33129.805035] sd 5:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[33129.805043] sd 5:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 0a f8 00 00 10 00
[33129.805050] blk_update_request: I/O error, dev sdb, sector 2808 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[33129.805179] blk_update_request: I/O error, dev sdb, sector 2568 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[33129.805191] Buffer I/O error on dev sdb1, logical block 65, async page read
[33146.620435] usb 2-3: new high-speed USB device number 22 using ehci-pci
[33146.778548] usb 2-3: New USB device found, idVendor=1221, idProduct=3234, bcdDevice= 0.00
[33146.778554] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33146.778559] usb 2-3: Product: Flash Disk
[33146.778564] usb 2-3: Manufacturer: USB2.0
[33146.778569] usb 2-3: SerialNumber: A6X203E
[33146.779162] usb-storage 2-3:1.0: USB Mass Storage device detected
[33146.782861] scsi host5: usb-storage 2-3:1.0
[33147.809359] scsi 5:0:0:0: Direct-Access     USB2.0   Flash Disk       2.b0 PQ: 0 ANSI: 2
[33147.810231] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33147.810819] sd 5:0:0:0: [sdb] 8007680 512-byte logical blocks: (4.10 GB/3.82 GiB)
[33147.811556] sd 5:0:0:0: [sdb] Write Protect is off
[33147.811563] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[33147.812184] sd 5:0:0:0: [sdb] No Caching mode page found
[33147.812195] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[33147.828094]  sdb: sdb1
[33147.830939] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33199.288532] usb 1-2: reset high-speed USB device number 22 using ehci-pci
[33200.647595] usb 1-2: USB disconnect, device number 22
[33201.724391] usb 1-2: new high-speed USB device number 23 using ehci-pci
[33201.888476] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[33201.888484] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33201.889232] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33201.891911] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[33201.892451] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[33201.892462] uvcvideo: Failed to initialize the device (-5).
[33201.906478] usb 1-2: USB disconnect, device number 23
[33202.320439] usb 1-2: new high-speed USB device number 24 using ehci-pci
[33202.480311] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[33202.480318] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33202.481597] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33202.482905] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[33202.483285] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[33202.483293] uvcvideo: Failed to initialize the device (-5).
[33203.413461] usbcore: deregistering interface driver uvcvideo
[33203.538805] mc: Linux media interface: v0.10
[33203.565467] videodev: Linux video capture interface: v2.00
[33203.614500] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33203.618346] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33203.618353] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33203.618358] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33203.618605] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input31
[33203.619000] usbcore: registered new interface driver uvcvideo
[33203.619003] USB Video Class driver (1.1.1)
[33203.861982] usbcore: deregistering interface driver uvcvideo
[33203.964924] videobuf2_vmalloc: Unknown symbol vb2_common_vm_ops (err -2)
[33203.965039] videobuf2_vmalloc: Unknown symbol vb2_create_framevec (err -2)
[33203.965126] videobuf2_vmalloc: Unknown symbol vb2_destroy_framevec (err -2)
[33204.007906] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33204.011153] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33204.011159] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33204.011165] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33204.012015] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input32
[33204.016129] usbcore: registered new interface driver uvcvideo
[33204.016132] USB Video Class driver (1.1.1)
[33204.924224] usbcore: deregistering interface driver uvcvideo
[33205.160254] mc: Linux media interface: v0.10
[33205.197415] videodev: Linux video capture interface: v2.00
[33205.255506] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33205.259684] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33205.259691] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33205.259696] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33205.263773] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input33
[33205.265063] usbcore: registered new interface driver uvcvideo
[33205.265065] USB Video Class driver (1.1.1)
[33205.477293] usbcore: deregistering interface driver uvcvideo
[33205.560633] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[33205.607295] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[33205.612715] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[33205.612722] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[33205.612727] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[33205.612977] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input34
[33205.613530] usbcore: registered new interface driver uvcvideo
[33205.613532] USB Video Class driver (1.1.1)
[33291.492569] usb 2-3: USB disconnect, device number 22
[33294.908419] usb 2-3: new high-speed USB device number 23 using ehci-pci
[33295.066805] usb 2-3: New USB device found, idVendor=1221, idProduct=3234, bcdDevice= 0.00
[33295.066812] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33295.066817] usb 2-3: Product: Flash Disk
[33295.066822] usb 2-3: Manufacturer: USB2.0
[33295.066827] usb 2-3: SerialNumber: A63E
[33295.069813] usb-storage 2-3:1.0: USB Mass Storage device detected
[33295.084534] scsi host5: usb-storage 2-3:1.0
[33296.097388] scsi 5:0:0:0: Direct-Access     USB2.0   Flash Disk       2.b0 PQ: 0 ANSI: 2
[33296.098336] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33296.099712] sd 5:0:0:0: [sdb] 8007680 512-byte logical blocks: (4.10 GB/3.82 GiB)
[33296.100457] sd 5:0:0:0: [sdb] Write Protect is off
[33296.100468] sd 5:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[33296.101192] sd 5:0:0:0: [sdb] No Caching mode page found
[33296.101203] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[33296.126484]  sdb: sdb1
[33296.129639] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33337.775706] usb 2-3: USB disconnect, device number 23
[33351.304440] usb 2-3: new high-speed USB device number 24 using ehci-pci
[33351.483187] usb 2-3: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[33351.483194] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[33351.483199] usb 2-3: Product: USB Flash Disk
[33351.483204] usb 2-3: Manufacturer: General
[33351.483208] usb 2-3: SerialNumber: 041040
[33351.483789] usb-storage 2-3:1.0: USB Mass Storage device detected
[33351.489544] usb-storage 2-3:1.0: Quirks match for vid 090c pid 1000: 400
[33351.489669] scsi host5: usb-storage 2-3:1.0
[33352.718782] scsi 5:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 0 CCS
[33352.719755] sd 5:0:0:0: Attached scsi generic sg2 type 0
[33352.721078] sd 5:0:0:0: [sdb] 3932160 512-byte logical blocks: (2.01 GB/1.88 GiB)
[33352.721953] sd 5:0:0:0: [sdb] Write Protect is off
[33352.721960] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
[33352.722827] sd 5:0:0:0: [sdb] No Caching mode page found
[33352.722838] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[33352.745740]  sdb: sdb1
[33352.749341] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[33895.386488] usb 2-3: USB disconnect, device number 24
[33904.432442] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[34264.152427] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[34952.000464] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[34966.405510] audit: type=1400 audit(1598186377.877:27): apparmor="ALLOWED" operation="file_mmap" profile="libreoffice-soffice" name="/tmp/.glrWhKkF" pid=27461 comm="soffice.bin" requested_mask="m" denied_mask="m" fsuid=1000 ouid=1000
[37492.140478] usb 1-2: reset high-speed USB device number 24 using ehci-pci
[37492.482131] usb 1-2: USB disconnect, device number 24
[37492.792452] usb 1-2: new high-speed USB device number 25 using ehci-pci
[37492.952404] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[37492.952411] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[37492.954747] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[37492.956008] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[37492.956471] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[37492.956479] uvcvideo: Failed to initialize the device (-5).
[37494.045810] usbcore: deregistering interface driver uvcvideo
[37494.181003] mc: Linux media interface: v0.10
[37494.207222] videodev: Linux video capture interface: v2.00
[37494.239420] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[37494.243355] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[37494.243362] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[37494.243367] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[37494.243700] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input35
[37494.244066] usbcore: registered new interface driver uvcvideo
[37494.244068] USB Video Class driver (1.1.1)
[37494.539721] usbcore: deregistering interface driver uvcvideo
[37494.648743] uvcvideo: Unknown symbol vb2_queue_init (err -2)
[37494.648819] uvcvideo: Unknown symbol v4l2_fh_exit (err -2)
[37494.648914] uvcvideo: Unknown symbol video_ioctl2 (err -2)
[37494.648929] uvcvideo: Unknown symbol media_device_unregister (err -2)
[37494.649008] uvcvideo: Unknown symbol vb2_streamoff (err -2)
[37494.649081] uvcvideo: Unknown symbol vb2_queue_release (err -2)
[37494.649146] uvcvideo: Unknown symbol v4l2_format_info (err -2)
[37494.649210] uvcvideo: Unknown symbol vb2_ioctl_streamoff (err -2)
[37494.681248] uvcvideo: Unknown symbol media_device_init (err -2)
[37494.681321] uvcvideo: Unknown symbol vb2_poll (err -2)
[37494.681401] uvcvideo: Unknown symbol v4l2_fh_del (err -2)
[37494.681466] uvcvideo: Unknown symbol v4l2_fh_add (err -2)
[37494.681530] uvcvideo: Unknown symbol vb2_ops_wait_finish (err -2)
[37494.681618] uvcvideo: Unknown symbol vb2_dqbuf (err -2)
[37494.681699] uvcvideo: Unknown symbol __media_device_register (err -2)
[37494.681763] uvcvideo: Unknown symbol vb2_ioctl_querybuf (err -2)
[37494.681827] uvcvideo: Unknown symbol v4l2_subdev_init (err -2)
[37494.681891] uvcvideo: Unknown symbol v4l2_fh_open (err -2)
[37494.681970] uvcvideo: Unknown symbol vb2_reqbufs (err -2)
[37494.682037] uvcvideo: Unknown symbol media_create_pad_link (err -2)
[37494.682101] uvcvideo: Unknown symbol v4l2_device_register_subdev (err -2)
[37494.682192] uvcvideo: Unknown symbol vb2_expbuf (err -2)
[37494.682265] uvcvideo: Unknown symbol video_devdata (err -2)
[37494.682329] uvcvideo: Unknown symbol vb2_fop_release (err -2)
[37494.682401] uvcvideo: Unknown symbol vb2_streamon (err -2)
[37494.682465] uvcvideo: Unknown symbol v4l2_ctrl_replace (err -2)
[37494.682533] uvcvideo: Unknown symbol v4l2_type_names (err -2)
[37494.682600] uvcvideo: Unknown symbol media_device_cleanup (err -2)
[37494.682668] uvcvideo: Unknown symbol vb2_ioctl_dqbuf (err -2)
[37494.682733] uvcvideo: Unknown symbol vb2_querybuf (err -2)
[37494.682800] uvcvideo: Unknown symbol vb2_ioctl_create_bufs (err -2)
[37494.682865] uvcvideo: Unknown symbol vb2_ioctl_prepare_buf (err -2)
[37494.682928] uvcvideo: Unknown symbol vb2_qbuf (err -2)
[37494.683017] uvcvideo: Unknown symbol vb2_buffer_done (err -2)
[37494.683080] uvcvideo: Unknown symbol vb2_plane_vaddr (err -2)
[37494.683145] uvcvideo: Unknown symbol v4l2_fh_init (err -2)
[37494.683215] uvcvideo: Unknown symbol media_entity_pads_init (err -2)
[37494.683280] uvcvideo: Unknown symbol video_unregister_device (err -2)
[37494.683344] uvcvideo: Unknown symbol v4l2_prio_init (err -2)
[37494.683415] uvcvideo: Unknown symbol v4l2_event_subscribe (err -2)
[37494.683486] uvcvideo: Unknown symbol vb2_ioctl_qbuf (err -2)
[37494.683549] uvcvideo: Unknown symbol vb2_fop_mmap (err -2)
[37494.683620] uvcvideo: Unknown symbol vb2_vmalloc_memops (err -2)
[37494.683696] uvcvideo: Unknown symbol v4l2_device_register (err -2)
[37494.683777] uvcvideo: Unknown symbol v4l2_ctrl_merge (err -2)
[37494.683862] uvcvideo: Unknown symbol __video_register_device (err -2)
[37494.683927] uvcvideo: Unknown symbol vb2_ops_wait_prepare (err -2)
[37494.684011] uvcvideo: Unknown symbol vb2_ioctl_streamon (err -2)
[37494.684076] uvcvideo: Unknown symbol vb2_fop_poll (err -2)
[37494.684139] uvcvideo: Unknown symbol vb2_create_bufs (err -2)
[37494.684207] uvcvideo: Unknown symbol v4l2_device_unregister (err -2)
[37494.684275] uvcvideo: Unknown symbol vb2_mmap (err -2)
[37494.684399] uvcvideo: Unknown symbol v4l2_event_queue_fh (err -2)
[37494.704689] uvcvideo: Unknown symbol v4l2_event_unsubscribe (err -2)
[37494.704763] uvcvideo: Unknown symbol vb2_ioctl_reqbufs (err -2)
[37494.731499] mc: Linux media interface: v0.10
[37494.759112] videodev: Linux video capture interface: v2.00
[37494.795891] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[37494.799187] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[37494.799194] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[37494.799200] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[37494.799444] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input36
[37494.799775] usbcore: registered new interface driver uvcvideo
[37494.799778] USB Video Class driver (1.1.1)
[37691.490927] audit: type=1400 audit(1598189102.960:28): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[37691.491003] audit: type=1400 audit(1598189102.960:29): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37691.491015] audit: type=1400 audit(1598189102.960:30): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37691.491108] audit: type=1400 audit(1598189102.960:31): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37691.491119] audit: type=1400 audit(1598189102.960:32): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29387 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37691.549563] audit: type=1400 audit(1598189103.020:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/moi/.local/share/gvfs-metadata/smb-share:server=freenas.local,share=nous" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37691.550323] audit: type=1400 audit(1598189103.020:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/moi/.local/share/gvfs-metadata/smb-share:server=freenas.local,share=nous-6bc4b2b8.log" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37712.785435] audit: type=1400 audit(1598189124.256:35): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[37712.803314] audit: type=1400 audit(1598189124.272:36): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=27460 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[37748.699624] audit: type=1400 audit(1598189160.169:37): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[37748.708435] audit: type=1400 audit(1598189160.181:38): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37748.708448] audit: type=1400 audit(1598189160.181:39): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37748.709133] audit: type=1400 audit(1598189160.181:40): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37748.709144] audit: type=1400 audit(1598189160.181:41): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29469 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37802.311032] audit: type=1400 audit(1598189213.781:42): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[37802.311709] audit: type=1400 audit(1598189213.781:43): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37802.311719] audit: type=1400 audit(1598189213.781:44): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[37802.311830] audit: type=1400 audit(1598189213.781:45): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[37802.311839] audit: type=1400 audit(1598189213.781:46): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=29521 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[38154.772552] usb 1-2: USB disconnect, device number 25
[39667.669916] audit: type=1400 audit(1598191079.139:47): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[39667.669931] audit: type=1400 audit(1598191079.139:48): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[39667.669941] audit: type=1400 audit(1598191079.139:49): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[39667.671309] audit: type=1400 audit(1598191079.139:50): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[39667.671321] audit: type=1400 audit(1598191079.139:51): apparmor="ALLOWED" operation="file_perm" profile="libreoffice-oopslash" name="/tmp/OSL_PIPE_1000_SingleOfficeIPC_8ac9fbd06c60296df043b65bcec1a72f" pid=30153 comm="oosplash" requested_mask="w" denied_mask="w" fsuid=1000 ouid=1000
[41018.832477] usb 1-2: new high-speed USB device number 26 using ehci-pci
[41019.000367] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[41019.000374] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[41019.004605] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41019.010955] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[41019.011331] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[41019.011338] uvcvideo: Failed to initialize the device (-5).
[41019.540401] usb 1-2: USB disconnect, device number 26
[41019.860475] usb 1-2: new high-speed USB device number 27 using ehci-pci
[41020.020383] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[41020.020389] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[41020.021014] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41020.022339] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[41020.022715] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[41020.022723] uvcvideo: Failed to initialize the device (-5).
[41020.453558] usbcore: deregistering interface driver uvcvideo
[41020.536707] videobuf2_v4l2: Unknown symbol vb2_buffer_in_use (err -2)
[41020.536777] videobuf2_v4l2: Unknown symbol vb2_core_queue_init (err -2)
[41020.536847] videobuf2_v4l2: Unknown symbol vb2_verify_memory_type (err -2)
[41020.536915] videobuf2_v4l2: Unknown symbol vb2_core_reqbufs (err -2)
[41020.536986] videobuf2_v4l2: Unknown symbol vb2_core_expbuf (err -2)
[41020.537054] videobuf2_v4l2: Unknown symbol vb2_core_create_bufs (err -2)
[41020.537138] videobuf2_v4l2: Unknown symbol video_devdata (err -2)
[41020.548575] videobuf2_v4l2: Unknown symbol media_request_get_by_fd (err -2)
[41020.548646] videobuf2_v4l2: Unknown symbol vb2_write (err -2)
[41020.548714] videobuf2_v4l2: Unknown symbol vb2_request_buffer_cnt (err -2)
[41020.548781] videobuf2_v4l2: Unknown symbol vb2_core_queue_release (err -2)
[41020.548850] videobuf2_v4l2: Unknown symbol media_request_put (err -2)
[41020.564585] videobuf2_v4l2: Unknown symbol v4l2_fh_release (err -2)
[41020.564657] videobuf2_v4l2: Unknown symbol v4l2_event_pending (err -2)
[41020.564734] videobuf2_v4l2: Unknown symbol vb2_core_prepare_buf (err -2)
[41020.564800] videobuf2_v4l2: Unknown symbol vb2_read (err -2)
[41020.564867] videobuf2_v4l2: Unknown symbol vb2_core_poll (err -2)
[41020.564934] videobuf2_v4l2: Unknown symbol vb2_core_streamon (err -2)
[41020.565002] videobuf2_v4l2: Unknown symbol vb2_core_querybuf (err -2)
[41020.565069] videobuf2_v4l2: Unknown symbol vb2_core_qbuf (err -2)
[41020.565135] videobuf2_v4l2: Unknown symbol vb2_mmap (err -2)
[41020.565201] videobuf2_v4l2: Unknown symbol vb2_core_dqbuf (err -2)
[41020.565272] videobuf2_v4l2: Unknown symbol vb2_core_streamoff (err -2)
[41020.593721] mc: Linux media interface: v0.10
[41020.623748] videodev: Linux video capture interface: v2.00
[41020.660296] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41020.665244] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[41020.665250] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[41020.665256] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[41020.665918] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input37
[41020.666284] usbcore: registered new interface driver uvcvideo
[41020.666287] USB Video Class driver (1.1.1)
[41021.715346] usbcore: deregistering interface driver uvcvideo
[41021.892947] mc: Linux media interface: v0.10
[41021.919283] videodev: Linux video capture interface: v2.00
[41021.953198] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41021.958756] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[41021.958763] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[41021.958769] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[41021.959051] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input38
[41021.959415] usbcore: registered new interface driver uvcvideo
[41021.959417] USB Video Class driver (1.1.1)
[41022.239651] usbcore: deregistering interface driver uvcvideo
[41022.309445] videobuf2_v4l2: Unknown symbol vb2_buffer_in_use (err -2)
[41022.309578] videobuf2_v4l2: Unknown symbol vb2_core_queue_init (err -2)
[41022.324613] videobuf2_v4l2: Unknown symbol vb2_verify_memory_type (err -2)
[41022.324685] videobuf2_v4l2: Unknown symbol vb2_core_reqbufs (err -2)
[41022.324757] videobuf2_v4l2: Unknown symbol vb2_core_expbuf (err -2)
[41022.324828] videobuf2_v4l2: Unknown symbol vb2_core_create_bufs (err -2)
[41022.324853] videobuf2_v4l2: Unknown symbol video_devdata (err -2)
[41022.324938] videobuf2_v4l2: Unknown symbol vb2_write (err -2)
[41022.325010] videobuf2_v4l2: Unknown symbol vb2_request_buffer_cnt (err -2)
[41022.325082] videobuf2_v4l2: Unknown symbol vb2_core_queue_release (err -2)
[41022.325100] videobuf2_v4l2: Unknown symbol v4l2_fh_release (err -2)
[41022.325111] videobuf2_v4l2: Unknown symbol v4l2_event_pending (err -2)
[41022.325189] videobuf2_v4l2: Unknown symbol vb2_core_prepare_buf (err -2)
[41022.344608] videobuf2_v4l2: Unknown symbol vb2_read (err -2)
[41022.344679] videobuf2_v4l2: Unknown symbol vb2_core_poll (err -2)
[41022.344749] videobuf2_v4l2: Unknown symbol vb2_core_streamon (err -2)
[41022.344822] videobuf2_v4l2: Unknown symbol vb2_core_querybuf (err -2)
[41022.344894] videobuf2_v4l2: Unknown symbol vb2_core_qbuf (err -2)
[41022.344963] videobuf2_v4l2: Unknown symbol vb2_mmap (err -2)
[41022.345032] videobuf2_v4l2: Unknown symbol vb2_core_dqbuf (err -2)
[41022.360578] videobuf2_v4l2: Unknown symbol vb2_core_streamoff (err -2)
[41022.433946] videodev: Linux video capture interface: v2.00
[41022.466270] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[41022.470882] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[41022.470889] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[41022.470894] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[41022.471170] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input39
[41022.471528] usbcore: registered new interface driver uvcvideo
[41022.471530] USB Video Class driver (1.1.1)
[41307.060463] usb 1-2: reset high-speed USB device number 27 using ehci-pci
[41310.036563] usb 1-2: USB disconnect, device number 27
[48186.272388] usb 2-1: new high-speed USB device number 25 using ehci-pci
[48186.430647] usb 2-1: New USB device found, idVendor=04a9, idProduct=10e4, bcdDevice= 1.01
[48186.430654] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[48186.430660] usb 2-1: Product: iP2800 series
[48186.430664] usb 2-1: Manufacturer: Canon
[48186.430669] usb 2-1: SerialNumber: 936
[48187.812583] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48187.812691] usbcore: registered new interface driver usblp
[48193.541266] usblp0: removed
[48193.547681] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48193.571506] usblp0: removed
[48193.581197] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48198.747686] usblp0: removed
[48198.751277] usblp 2-1:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10E4
[48244.249617] audit: type=1400 audit(1598199655.719:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=33765 comm="cups-browsed" capability=23  capname="sys_nice"
[48349.038878] usb 2-1: USB disconnect, device number 25
[48349.039331] usblp0: removed
[53338.660388] usb 1-2: new high-speed USB device number 28 using ehci-pci
[53339.212480] usb 1-2: device not accepting address 28, error -71
[53339.548501] usb 1-2: new high-speed USB device number 29 using ehci-pci
[53339.712379] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b, bcdDevice= 1.00
[53339.712386] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[53339.713150] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[53339.714457] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[53339.714834] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
[53339.714842] uvcvideo: Failed to initialize the device (-5).
[53340.758441] usbcore: deregistering interface driver uvcvideo
[53340.920144] mc: Linux media interface: v0.10
[53341.029007] videodev: Linux video capture interface: v2.00
[53341.174317] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[53341.181147] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[53341.181154] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[53341.181159] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[53341.181968] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input40
[53341.206549] usbcore: registered new interface driver uvcvideo
[53341.206553] USB Video Class driver (1.1.1)
[53341.671168] usbcore: deregistering interface driver uvcvideo
[53341.783774] videobuf2_common: Unknown symbol v4l_vb2q_enable_media_source (err -2)
[53341.920164] mc: Linux media interface: v0.10
[53342.031912] videodev: Linux video capture interface: v2.00
[53342.123836] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183b)
[53342.146412] uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized!
[53342.146420] uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized!
[53342.146425] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[53342.147278] input: UVC Camera (05ca:183b) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input41
[53342.148830] usbcore: registered new interface driver uvcvideo
[53342.148834] USB Video Class driver (1.1.1)

Code : Tout sélectionner

date >> $HOME/Téléchargements/top.lis
ps -eo pid,ppid,cmd,%mem,%cpu --sort=-%cpu | head >> $HOME/Téléchargements/top.lis