Forum-Francophone-LinuxMint.fr


https://forum-francophone-linuxmint.fr/

Test Disque Dur avec Badblocks

https://forum-francophone-linuxmint.fr/viewtopic.php?t=22570

Page 1 sur 1

Test Disque Dur avec Badblocks

Posté : dim. 15 sept. 2024 17:55
par jumbo67
Bonjour,
Je viens de finir de tester mon disque dur ( 12h15mn ) avec la commande badblocks dont voici le résultat:

Code : Tout sélectionner

mint@mint:~$ sudo badblocks -s -v -n -f /dev/sdb
Checking for bad blocks in non-destructive read-write mode
From block 0 to 244198583
Checking for bad blocks (non-destructive read-write test)
Testing with random pattern: 54137728done, 2:14:24 elapsed. (0/0/0 errors)
57074448done, 2:22:07 elapsed. (1/0/0 errors)
57074449done, 2:22:11 elapsed. (2/0/0 errors)
57074450done, 2:22:15 elapsed. (3/0/0 errors)
57074451done, 2:22:18 elapsed. (4/0/0 errors)
60570244done, 2:31:33 elapsed. (5/0/0 errors)
60570245done, 2:31:37 elapsed. (6/0/0 errors)
60570246done, 2:31:41 elapsed. (7/0/0 errors)
60570247done, 2:31:44 elapsed. (8/0/0 errors)
61678336done, 2:34:46 elapsed. (9/0/0 errors)
61678337done, 2:34:49 elapsed. (10/0/0 errors)
61678338done, 2:34:53 elapsed. (11/0/0 errors)
61678339done, 2:34:57 elapsed. (12/0/0 errors)
61687104done, 2:35:09 elapsed. (13/0/0 errors)
61687105done, 2:35:13 elapsed. (14/0/0 errors)
61687106done, 2:35:17 elapsed. (15/0/0 errors)
61687107done, 2:35:20 elapsed. (16/0/0 errors)
74846372done, 3:08:21 elapsed. (17/0/0 errors)
74846373done, 3:08:25 elapsed. (18/0/0 errors)
74846374done, 3:08:29 elapsed. (19/0/0 errors)
74846375done, 3:08:32 elapsed. (20/0/0 errors)
74847008done, 3:08:45 elapsed. (21/0/0 errors)
74847009done, 3:08:48 elapsed. (22/0/0 errors)
74847010done, 3:08:52 elapsed. (23/0/0 errors)
74847011done, 3:08:56 elapsed. (24/0/0 errors)
136482440one, 6:02:29 elapsed. (25/0/0 errors)
136482441one, 6:02:33 elapsed. (26/0/0 errors)
136482442one, 6:02:37 elapsed. (27/0/0 errors)
136482443one, 6:02:41 elapsed. (28/0/0 errors)
136482444one, 6:02:49 elapsed. (29/0/0 errors)
136482445one, 6:02:52 elapsed. (30/0/0 errors)
136482446one, 6:02:56 elapsed. (31/0/0 errors)
136482447one, 6:03:00 elapsed. (32/0/0 errors)
175387112one, 8:02:00 elapsed. (33/0/0 errors)
175387113one, 8:02:04 elapsed. (34/0/0 errors)
175387114one, 8:02:08 elapsed. (35/0/0 errors)
175387115one, 8:02:11 elapsed. (36/0/0 errors)
175387740one, 8:02:23 elapsed. (37/0/0 errors)
175387741one, 8:02:26 elapsed. (38/0/0 errors)
175387742one, 8:02:30 elapsed. (39/0/0 errors)
175387743one, 8:02:34 elapsed. (40/0/0 errors)
175388196one, 8:02:45 elapsed. (41/0/0 errors)
175388197one, 8:02:49 elapsed. (42/0/0 errors)
175388198one, 8:02:52 elapsed. (43/0/0 errors)
175388199one, 8:02:56 elapsed. (44/0/0 errors)
175388368one, 8:03:07 elapsed. (45/0/0 errors)
175388369one, 8:03:11 elapsed. (46/0/0 errors)
175388370one, 8:03:15 elapsed. (47/0/0 errors)
175388371one, 8:03:18 elapsed. (48/0/0 errors)
175388824one, 8:03:30 elapsed. (49/0/0 errors)
175388825one, 8:03:33 elapsed. (50/0/0 errors)
175388826one, 8:03:37 elapsed. (51/0/0 errors)
175388827one, 8:03:41 elapsed. (52/0/0 errors)
175389000one, 8:03:52 elapsed. (53/0/0 errors)
175389001one, 8:03:56 elapsed. (54/0/0 errors)
175389002one, 8:03:59 elapsed. (55/0/0 errors)
175389003one, 8:04:03 elapsed. (56/0/0 errors)
175389452one, 8:04:14 elapsed. (57/0/0 errors)
175389453one, 8:04:18 elapsed. (58/0/0 errors)
175389454one, 8:04:22 elapsed. (59/0/0 errors)
175389455one, 8:04:25 elapsed. (60/0/0 errors)
175389628one, 8:04:36 elapsed. (61/0/0 errors)
175389629one, 8:04:40 elapsed. (62/0/0 errors)
175389630one, 8:04:44 elapsed. (63/0/0 errors)
175389631one, 8:04:47 elapsed. (64/0/0 errors)
175390256one, 8:04:59 elapsed. (65/0/0 errors)
175390257one, 8:05:02 elapsed. (66/0/0 errors)
175390258one, 8:05:06 elapsed. (67/0/0 errors)
175390259one, 8:05:10 elapsed. (68/0/0 errors)
175390800one, 8:05:21 elapsed. (69/0/0 errors)
175390801one, 8:05:25 elapsed. (70/0/0 errors)
175390802one, 8:05:28 elapsed. (71/0/0 errors)
175390803one, 8:05:32 elapsed. (72/0/0 errors)
175390884one, 8:05:43 elapsed. (73/0/0 errors)
175390885one, 8:05:47 elapsed. (74/0/0 errors)
175390886one, 8:05:51 elapsed. (75/0/0 errors)
175390887one, 8:05:54 elapsed. (76/0/0 errors)
175391432one, 8:06:06 elapsed. (77/0/0 errors)
175391433one, 8:06:09 elapsed. (78/0/0 errors)
175391434one, 8:06:13 elapsed. (79/0/0 errors)
175391435one, 8:06:17 elapsed. (80/0/0 errors)
175392060one, 8:06:28 elapsed. (81/0/0 errors)
175392061one, 8:06:32 elapsed. (82/0/0 errors)
175392062one, 8:06:35 elapsed. (83/0/0 errors)
175392063one, 8:06:39 elapsed. (84/0/0 errors)
175392236one, 8:06:50 elapsed. (85/0/0 errors)
175392237one, 8:06:54 elapsed. (86/0/0 errors)
175392238one, 8:06:58 elapsed. (87/0/0 errors)
175392239one, 8:07:01 elapsed. (88/0/0 errors)
175392688one, 8:07:13 elapsed. (89/0/0 errors)
175392689one, 8:07:16 elapsed. (90/0/0 errors)
175392690one, 8:07:20 elapsed. (91/0/0 errors)
175392691one, 8:07:24 elapsed. (92/0/0 errors)
175393316one, 8:07:35 elapsed. (93/0/0 errors)
175393317one, 8:07:39 elapsed. (94/0/0 errors)
175393318one, 8:07:43 elapsed. (95/0/0 errors)
175393319one, 8:07:47 elapsed. (96/0/0 errors)
206261313one, 9:49:52 elapsed. (97/0/0 errors)
206261348one, 9:49:59 elapsed. (98/0/0 errors)
212394412one, 10:11:30 elapsed. (99/0/0 errors)
212394413one, 10:11:34 elapsed. (100/0/0 errors)
212394414one, 10:11:38 elapsed. (101/0/0 errors)
212394415one, 10:11:42 elapsed. (102/0/0 errors)
216448772one, 10:26:15 elapsed. (103/0/0 errors)
216448773one, 10:26:19 elapsed. (104/0/0 errors)
216448774one, 10:26:23 elapsed. (105/0/0 errors)
216448775one, 10:26:27 elapsed. (106/0/0 errors)
216448776one, 10:26:34 elapsed. (107/0/0 errors)
216448777one, 10:26:38 elapsed. (108/0/0 errors)
216448778one, 10:26:42 elapsed. (109/0/0 errors)
216448779one, 10:26:46 elapsed. (110/0/0 errors)
216448816one, 10:26:53 elapsed. (111/0/0 errors)
216448817one, 10:26:57 elapsed. (112/0/0 errors)
216448818one, 10:27:00 elapsed. (113/0/0 errors)
216448819one, 10:27:04 elapsed. (114/0/0 errors)
216448820one, 10:27:12 elapsed. (115/0/0 errors)
216448821one, 10:27:15 elapsed. (116/0/0 errors)
216448822one, 10:27:19 elapsed. (117/0/0 errors)
216448823one, 10:27:23 elapsed. (118/0/0 errors)
216449156one, 10:27:34 elapsed. (119/0/0 errors)
216449157one, 10:27:38 elapsed. (120/0/0 errors)
216449158one, 10:27:41 elapsed. (121/0/0 errors)
216449159one, 10:27:45 elapsed. (122/0/0 errors)
216449160one, 10:27:53 elapsed. (123/0/0 errors)
216449161one, 10:28:00 elapsed. (124/0/0 errors)
216449162one, 10:28:04 elapsed. (125/0/0 errors)
216449163one, 10:28:08 elapsed. (126/0/0 errors)
225367996one, 11:01:42 elapsed. (127/0/0 errors)
225367997one, 11:01:46 elapsed. (128/0/0 errors)
225367998one, 11:01:49 elapsed. (129/0/0 errors)
225367999one, 11:01:53 elapsed. (130/0/0 errors)
done                                                 
Pass completed, 131 bad blocks found. (131/0/0 errors)
mint@mint:~$
Je pense que le résultat n'est pas top. Je voulais savoir comment faire pour réparer(si possible) et isoler les secteurs défectueux avec la commande Fsck? J'ai vu des tutos mais c'est surtout quelles options mettrent avec la commande. Merci d'avance pour l'aide. Est ce que cette commande serait bonne?

Code : Tout sélectionner

sudo fsck -cfvr /dev/sdb

jumbo67

Re: Test Disque Dur avec Badblocks

Posté : lun. 16 sept. 2024 11:26
par jumbo67
Bonjour cyrille,
Merci pour le retour. J'avais déjà pris connaissance de ton tutoriel mais je ne comprends pas la partie réparation en fin de tuto. Voici l'état de mon DD avec smartmontools:

Code : Tout sélectionner

bruno@extensa-5635:~$ sudo smartctl --all /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-121-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.6
Device Model:     ST9250315AS
Serial Number:    6VC0AFZ0
LU WWN Device Id: 5 000c50 018c12de4
Firmware Version: 0001SDM1
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Sep 16 10:57:31 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  75) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103b)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   103   093   006    Pre-fail  Always       -       235975149
  3 Spin_Up_Time            0x0003   099   072   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   093   093   020    Old_age   Always       -       7191
  7 Seek_Error_Rate         0x0033   100   100   030    Pre-fail  Always       -       12
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       270928220
  9 Power_On_Hours          0x0032   088   088   000    Old_age   Always       -       10779
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   037   020    Old_age   Always       -       5151
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       650
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       34360263515
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   064   052   045    Old_age   Always       -       36 (Min/Max 22/36)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       103
194 Temperature_Celsius     0x0032   100   100   000    Old_age   Always       -       0 (Min/Max 0/2)
193 Load_Cycle_Count        0x0032   044   044   000    Old_age   Always       -       113768
194 Temperature_Celsius     0x0022   036   048   000    Old_age   Always       -       36 (0 10 0 0 0)
195 Hardware_ECC_Recovered  0x001a   045   036   000    Old_age   Always       -       235975149
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       33
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       33
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 623 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 623 occurred at disk power-on lifetime: 10774 hours (448 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 48 21 ec 08  Error: UNC at LBA = 0x08ec2148 = 149692744

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 20 ff ff ff 4f 00      00:01:12.701  READ FPDMA QUEUED
  60 00 00 50 20 ec 48 00      00:01:12.691  READ FPDMA QUEUED
  60 00 00 e8 35 ec 48 00      00:01:12.673  READ FPDMA QUEUED
  60 00 20 ff ff ff 4f 00      00:01:12.649  READ FPDMA QUEUED
  60 00 18 58 ff 5b 4e 00      00:01:12.636  READ FPDMA QUEUED

Error 622 occurred at disk power-on lifetime: 10772 hours (448 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:12:46.366  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00      11:12:46.364  CHECK POWER MODE
  ef 10 03 00 00 00 a0 00      11:12:46.361  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      11:12:46.350  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      11:12:45.931  IDENTIFY DEVICE

Error 621 occurred at disk power-on lifetime: 10772 hours (448 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:12:42.668  READ FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:12:42.665  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      11:12:42.654  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      11:12:42.239  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      11:12:42.238  SET FEATURES [Set transfer mode]

Error 620 occurred at disk power-on lifetime: 10772 hours (448 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:12:38.981  READ FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:12:38.977  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      11:12:38.966  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      11:12:38.551  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      11:12:38.550  SET FEATURES [Set transfer mode]

Error 619 occurred at disk power-on lifetime: 10772 hours (448 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      11:12:35.288  READ FPDMA QUEUED
  ef 10 03 00 00 00 a0 00      11:12:35.284  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      11:12:35.273  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      11:12:34.854  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      11:12:34.854  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%     10779         432897640
# 2  Short offline       Completed: read failure       90%      9006         350774226
# 3  Short offline       Completed: read failure       90%      8999         350774226
# 4  Short offline       Completed: read failure       80%      8981         272964887
# 5  Short offline       Interrupted (host reset)      90%         2         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

bruno@extensa-5635:~$
Est ce que la commande fsck (mentionnée sur mon 1er message) ne peut pas faire plus facilement la réparation(si possible) et isoler les secteurs défectueux?
jumbo67

Re: Test Disque Dur avec Badblocks

Posté : mar. 17 sept. 2024 04:42
par jumbo67
Bonjour cyrille,
Merci pour le retour et la réponse à ma question sur la commande fsck.
Pour la réparation éventuelle de badbloks c'est justement ça que je ne comprends pas sur ton tutoriel. C'est pour ça que je préfère demander ce qu'il faut que je fasse.

1èrement: e2fsprogs est déjà installé sur mon système
2èmement: je pense que je n'ai pas besoin de faire cette commande:

Code : Tout sélectionner

# badblocks -v /dev/sda6 > bad-blocks
Puisque j'ai déjà le résultat des erreurs sur mon disque avec la commande badblocks.
3èmement: c'est là que je ne sais pas ce qu'il faut faire.
D'après ton tutoriel si je prends par exemple la 1ère erreur sur mon disque(57074448), est qu'il faut que je fasse cette commande?

Code : Tout sélectionner

dd if=/dev/zero of=/dev/sdb bs=1024 seek=57074448 count=8
Et si oui est ce qu'il faut que je fasse ça sur les 130 autres erreurs trouvées par la commande badblocks sur mon disque?
Désolé de demander mais c'est pour ne pas faire une fausse manipulation.
Merci.
jumbo67
PS: j'ai oublié de demander si il faut faire la commande dd volume démonté?

Re: Test Disque Dur avec Badblocks

Posté : mar. 17 sept. 2024 14:37
par jumbo67
Cyrille,
Oui pas de soucis c'est pas urgent. Ça peut attendre. Je ne vais pas faire ces manipulations de suite. Je n'ai moi même pas trop de temps cette semaine.
Je sauvegarde tout sur un disque externe. Si le disque plante c'est pas grave. Il n'y a que le système dessus.
jumbo67.

Re: Test Disque Dur avec Badblocks

Posté : mar. 17 sept. 2024 16:58
par arghlub
Salut,
Un vieux tuto par mpat : viewtopic.php?f=12&t=2054 ;)
Heures au format UTC+02:00
Page 1 sur 1

Développé par phpBB® Forum Software © phpBB Limited

Traduit par phpBB-fr.com