Forum-Francophone-LinuxMint.fr


https://forum-francophone-linuxmint.fr/

Installation clé bluetooth Asus BT-500

https://forum-francophone-linuxmint.fr/viewtopic.php?t=24149

Page 1 sur 1

Installation clé bluetooth Asus BT-500

Posté : mer. 6 août 2025 16:21
par Mni37
Bonjour,
Je tente d'installer une clé USB Bluetooth Asus BT-500 après avoir téléchargé les drivers sur le site officiel Asus.
Malheureusement, celle-ci ne semble pas reconnue. Ci-dessous le détail du processus d'installation et des messages d'erreur et d'avertissement dont je ne sais pas quoi faire.
Une âme charitable pourrait-elle me guider dans ce que je dois faire ?
Merci.
Jacques

Code : Tout sélectionner

jacques@jacques-SATELLITE-L750D:~/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202$ sudo make install INTERFACE=usb
mkdir -p /lib/modules/6.8.0-60-generic/kernel/drivers/bluetooth
Start Realtek Bluetooth USB driver installation
mkdir -p /lib/firmware
Copy rtkbt-firmware/lib/firmware/rtl*_fw to /lib/firmware
cp -a rtkbt-firmware/lib/firmware/rtl*_fw /lib/firmware
Copy rtkbt-firmware/lib/firmware/rtl*_config /lib/firmware
cp -a rtkbt-firmware/lib/firmware/rtl*_config /lib/firmware
make -C usb install
make[1] : on entre dans le répertoire « /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb »
rmmod btusb
rmmod: ERROR: Module btusb is not currently loaded
make[1]: [Makefile:7 : install] Erreur 1 (ignorée)
mv /lib/modules/6.8.0-60-generic/kernel/drivers/bluetooth/btusb.ko /lib/modules/6.8.0-60-generic/kernel/drivers/bluetooth/btusb_bak
mv: impossible d'évaluer '/lib/modules/6.8.0-60-generic/kernel/drivers/bluetooth/btusb.ko': Aucun fichier ou dossier de ce nom
make[1]: [Makefile:8 : install] Erreur 1 (ignorée)
rmmod rtk_btusb
rmmod: ERROR: Module rtk_btusb is not currently loaded
make[1]: [Makefile:9 : install] Erreur 1 (ignorée)
make -C ./bluetooth_usb_driver
make[2] : on entre dans le répertoire « /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver »
make -C /lib/modules/6.8.0-60-generic/build M=/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver modules
make[3] : on entre dans le répertoire « /usr/src/linux-headers-6.8.0-60-generic »
warning: the compiler differs from the one used to build the kernel
  The kernel was built by: x86_64-linux-gnu-gcc-13 (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
  You are using:           gcc-13 (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0
  CC [M]  /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_coex.o
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_coex.c:956:6: warning: no previous prototype for ‘print_sbc_header’ [-Wmissing-prototypes]
  956 | void print_sbc_header(struct sbc_frame_hdr *hdr)
      |      ^~~~~~~~~~~~~~~~
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_coex.c:2200:6: warning: no previous prototype for ‘rtl_process_l2_sig’ [-Wmissing-prototypes]
 2200 | void rtl_process_l2_sig(struct rtl_l2_buff *l2)
      |      ^~~~~~~~~~~~~~~~~~
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_coex.c:2377:5: warning: no previous prototype for ‘ev_filter_out’ [-Wmissing-prototypes]
 2377 | int ev_filter_out(u8 *buf)
      |     ^~~~~~~~~~~~~
  CC [M]  /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.o
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:329:6: warning: no previous prototype for ‘util_hexdump’ [-Wmissing-prototypes]
  329 | void util_hexdump(const u8 *buf, size_t len)
      |      ^~~~~~~~~~~~
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:865:5: warning: no previous prototype for ‘set_scan’ [-Wmissing-prototypes]
  865 | int set_scan(struct usb_interface *intf)
      |     ^~~~~~~~
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:1089:5: warning: no previous prototype for ‘rtk_parse_config_file’ [-Wmissing-prototypes]
 1089 | int rtk_parse_config_file(u8 *config_buf, int filelen)
      |     ^~~~~~~~~~~~~~~~~~~~~
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:1140:9: warning: no previous prototype for ‘rtk_get_fw_project_id’ [-Wmissing-prototypes]
 1140 | uint8_t rtk_get_fw_project_id(uint8_t * p_buf)
      |         ^~~~~~~~~~~~~~~~~~~~~
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:1224:5: warning: no previous prototype for ‘bachk’ [-Wmissing-prototypes]
 1224 | int bachk(const char *str)
      |     ^~~~~
In file included from ./include/linux/string.h:292,
                 from ./include/linux/bitmap.h:12,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/paravirt.h:21,
                 from ./arch/x86/include/asm/cpuid.h:62,
                 from ./arch/x86/include/asm/processor.h:19,
                 from ./arch/x86/include/asm/timex.h:5,
                 from ./include/linux/timex.h:67,
                 from ./include/linux/time32.h:13,
                 from ./include/linux/time.h:60,
                 from ./include/linux/stat.h:19,
                 from ./include/linux/module.h:13,
                 from /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:23:
In function ‘fortify_memcpy_chk’,
    inlined from ‘load_config.constprop.isra’ at /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_misc.c:1353:4:
./include/linux/fortify-string.h:542:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
  542 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CC [M]  /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_bt.o
/home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_bt.c:1172:5: warning: no previous prototype for ‘rtkbt_pm_notify’ [-Wmissing-prototypes]
 1172 | int rtkbt_pm_notify(struct notifier_block *notifier,
      |     ^~~~~~~~~~~~~~~
  LD [M]  /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_btusb.o
  MODPOST /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/Module.symvers
  CC [M]  /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_btusb.mod.o
  LD [M]  /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_btusb.ko
  BTF [M] /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_btusb.ko
Skipping BTF generation for /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver/rtk_btusb.ko due to unavailability of vmlinux
make[3] : on quitte le répertoire « /usr/src/linux-headers-6.8.0-60-generic »
make[2] : on quitte le répertoire « /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver »
cp -f ./bluetooth_usb_driver/rtk_btusb.ko /lib/modules/6.8.0-60-generic/kernel/drivers/bluetooth/rtk_btusb.ko
depmod -a 6.8.0-60-generic
make -C ./bluetooth_usb_driver clean
make[2] : on entre dans le répertoire « /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver »
rm -rf *.o *.mod.c *.mod.o *.ko *.symvers *.order *.a
make[2] : on quitte le répertoire « /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb/bluetooth_usb_driver »
echo "install rtk_btusb success!"
install rtk_btusb success!
make[1] : on quitte le répertoire « /home/jacques/Applications/USB-BT500-Blue-Tooth/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/20200806_LINUX_BT_DRIVER_RTL8761B_COEX_v0202/usb »

Re: Installation clé bluetooth Asus BT-500

Posté : jeu. 7 août 2025 10:55
par Mni37
Bonjour Cyrille,
Merci de m'avoir proposé ces 2 liens.
J'ai suivi les instructions du second à partir du post 52, mais la première ligne du retour de commande me fait penser que j'ai problème différent qui pourrait expliquer que le Bluetooth ne fonctionne pas.

Code : Tout sélectionner

jacques@jacques-SATELLITE-L750D:~$ sudo dmesg | grep -i 'bluetooth\|hci\|btusb\|rtk_btusb\|btrtl\|firmware'
[sudo] Mot de passe de jacques :       
[    0.357661] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.427783] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.439338] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    1.567913] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-142)
[    1.700974] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.700994] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.701020] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.701033] ehci-pci 0000:00:12.2: debug port 1
[    1.701183] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034d000
[    1.708543] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.708798] usb usb1: Product: EHCI Host Controller
[    1.708801] usb usb1: Manufacturer: Linux 6.8.0-71-generic ehci_hcd
[    1.709794] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.709817] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2
[    1.709902] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034e000
[    1.766360] usb usb2: Product: OHCI PCI host controller
[    1.766364] usb usb2: Manufacturer: Linux 6.8.0-71-generic ohci_hcd
[    1.767275] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.767289] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.767298] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.767312] ehci-pci 0000:00:16.2: debug port 1
[    1.767366] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0348000
[    1.774526] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.774621] usb usb3: Product: EHCI Host Controller
[    1.774624] usb usb3: Manufacturer: Linux 6.8.0-71-generic ehci_hcd
[    1.775175] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.775189] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.775198] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.775211] ehci-pci 0000:00:13.2: debug port 1
[    1.775272] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034b000
[    1.781758] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.781866] usb usb4: Product: EHCI Host Controller
[    1.781870] usb usb4: Manufacturer: Linux 6.8.0-71-generic ehci_hcd
[    1.782556] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.782568] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.782608] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034c000
[    1.838366] usb usb5: Product: OHCI PCI host controller
[    1.838369] usb usb5: Manufacturer: Linux 6.8.0-71-generic ohci_hcd
[    1.839376] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.839388] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.839445] ohci-pci 0000:00:14.5: irq 18, io mem 0xf034a000
[    1.894834] usb usb6: Product: OHCI PCI host controller
[    1.894837] usb usb6: Manufacturer: Linux 6.8.0-71-generic ohci_hcd
[    1.895508] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.895518] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.895546] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0349000
[    1.950901] usb usb7: Product: OHCI PCI host controller
[    1.950905] usb usb7: Manufacturer: Linux 6.8.0-71-generic ohci_hcd
[    2.024697] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.197103] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    2.524822] ahci 0000:00:11.0: version 3.0
[    2.525358] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.525367] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    2.537021] usb 4-2: new high-speed USB device number 3 using ehci-pci
[    2.539786] scsi host0: ahci
[    2.567551] scsi host1: ahci
[    2.936145] usb 2-4: new full-speed USB device number 3 using ohci-pci
[    7.716987] Bluetooth: Core ver 2.22
[    7.717084] NET: Registered PF_BLUETOOTH protocol family
[    7.717088] Bluetooth: HCI device and connection manager initialized
[    7.717098] Bluetooth: HCI socket layer initialized
[    7.717107] Bluetooth: L2CAP socket layer initialized
[    7.717116] Bluetooth: SCO socket layer initialized
[    7.781344] usbcore: registered new interface driver btusb
[    7.789248] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[    7.791261] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    7.791274] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[    7.794316] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[    7.794681] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[    8.092223] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[    8.940207] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    9.139131] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.139145] Bluetooth: BNEP filters: protocol multicast
[    9.139155] Bluetooth: BNEP socket layer initialized
[    9.147932] Bluetooth: MGMT ver 1.22
[   27.050612] Bluetooth: RFCOMM TTY layer initialized
[   27.050635] Bluetooth: RFCOMM socket layer initialized
[   27.050655] Bluetooth: RFCOMM ver 1.11
jacques@jacques-SATELLITE-L750D:~$
Pourtant, tout semble ok avec ce retour de commande :

Code : Tout sélectionner

jacques@jacques-SATELLITE-L750D:~$ lsmod | grep bluetooth
bluetooth            1032192  44 btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm
ecdh_generic           16384  2 bluetooth
jacques@jacques-SATELLITE-L750D:~$

Re: Installation clé bluetooth Asus BT-500

Posté : jeu. 7 août 2025 12:40
par Mni37
Voici le retour :

Code : Tout sélectionner

jacques@jacques-SATELLITE-L750D:~$ sudo dmesg | egrep 'fail|start|error'
[sudo] Mot de passe de jacques :       
[    0.014213] Movable zone start for each node
[    0.358074] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.358707] ACPI: EC: EC started
[    1.708543] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.774526] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.781758] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    6.003846] systemd[1]: Queued start job for default target graphical.target.
[ 2745.294281] ACPI: EC: EC started
[ 2747.079715] Restarting tasks ... done.
jacques@jacques-SATELLITE-L750D:~$

Re: Installation clé bluetooth Asus BT-500

Posté : ven. 8 août 2025 10:27
par Mni37
Bonjour,
Miracle ce matin ma barre de son est vue !

Image

La solution proposée dans le deuxième lien proposé par Cyrille a donc fonctionné.
Pourquoi aujourd'hui et pas les jours précédents ?
Merci Cyrille de ma m'avoir aiguillé.
Jacques

Re: Installation clé bluetooth Asus BT-500

Posté : ven. 8 août 2025 13:04
par Mni37
Oui, j'ai rebooté après chaque manip, comme expliqué.
La nuit a certainement contribué à la résolution du problème, ou bien c'est une diablerie :twisted: .
Merci Cyrille.
Jacques
Heures au format UTC+02:00
Page 1 sur 1

Développé par phpBB® Forum Software © phpBB Limited

Traduit par phpBB-fr.com