Partition Win10 n'apparaît plus dans Grub au boot

Postez ici toutes vos demandes d’assistance générale concernant le fonctionnement de Linux Mint, qui n'entrent pas dans les autres rubriques.
Lyacos
Messages : 130
Enregistré le : dim. 14 janv. 2018 10:39

Re: Message d'avertissement depuis Gparted

Message par Lyacos »

Dernier message de la page précédente :

Bon, j'ai acheté des bluray vierges, j'ai gravé ce qu'il me fallait, puis j'ai supprimé la partition foiré de Win10, seul pépin quand je veux booter sur la partition saine de Win10, j'ai ce message: BOOTMGR absent.

Bon j'ai du faire une connerie... Linux boot normalement, ma partition avec mon Windows 10 (saine) est toujours présente (j'ai accès depuis Linux), rien n'est effacé, je comprends pas pourquoi je n'arrive pas à booter dessus, des idées ?

EDIT: j'ai pensé à faire une réinstallation via Synaptic de Grub-PC... Windows 10 n'apparaît même plus dans le loader, je n'ai que Mint, je précise que Win10 est toujours présent (accès depuis Mint). Bref je ne touche plus à rien, j'attends de l'aide... :?

EDIT2: j'essaye boot-repair (dernière chose que je test).
Modifié en dernier par Lyacos le jeu. 3 mai 2018 13:12, modifié 1 fois.
System: MATE 1.18.0 / Linux Mint 18.3 Sylvia
Mobo: GA-MA770T-UD3P
CPU: Quad core AMD Phenom II X4 965
Graphics: Graphics: Card: Advanced Micro Devices [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Audio: Card-1 Creative Labs EMU20k2 [X-Fi Titanium Series] / driver: snd_ctxfi / Card-2 Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
Ram: 8Go
mézig
Messages : 1818
Enregistré le : mar. 14 nov. 2017 14:40

Re: Message d'avertissement depuis Gparted

Message par mézig »

Essaies depuis ton LinuxMint

Code : Tout sélectionner

sudo update-grub
Sino il faudra essayer avec boot-repair

Le BOOTMGR etait sur l'autre W10
Intel Pentium Dual CPU E2140 -- Nvidia GF108 -- 4 Go de RAM -- Ubuntu 18.10 -- DEEPIN 15.11
Intel Pentium CPU 4405U @ 2.10GHz × 4 -- Intel HD Graphics 510 (Skylake GT1) -- 4 Go de RAM -- Ubuntu 19.04 -- Ubuntu 18.04 -- DEEPIN 15.11 avec partition de données commune
Lyacos
Messages : 130
Enregistré le : dim. 14 janv. 2018 10:39

Re: Message d'avertissement depuis Gparted

Message par Lyacos »

J'ai essayé boot-repair avant ta commande (je n'ai vu qu'après ton message). Nada.

J'ai essayé ta commande et voici ce que ça donne:

Code : Tout sélectionner

Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.10.0-38-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.10.0-38-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
fait
En clair il trouve pas Win10 ? Sérieusement, je ne sais plus quoi faire...

EDIT: voilà le résultat de boot info, cela peut vous aidez ?

Code : Tout sélectionner

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos3)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for /boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    search.fs_uuid 8497084d-dd34-4b8c-b929-ad7e055e1ef5 root hd0,msdos3 
    set prefix=($root)'/boot/grub'
    
    ---------------------------------------------------------------------------
 => Grub2 (v2.00) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for /boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk search_fs_uuid
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    search.fs_uuid 8497084d-dd34-4b8c-b929-ad7e055e1ef5 root hd0,msdos3 
    set prefix=($root)'/boot/grub'
    
    ---------------------------------------------------------------------------

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 18.3
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 7/2008: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda2         698,734,592 1,284,265,983   585,531,392   7 NTFS / exFAT / HPFS
/dev/sda3    *  1,284,265,984 1,366,187,858    81,921,875  83 Linux
/dev/sda4       1,366,190,078 1,953,523,711   587,333,634   5 Extended
/dev/sda5       1,366,190,080 1,374,382,079     8,192,000  82 Linux swap / Solaris
/dev/sda6       1,374,384,128 1,953,523,711   579,139,584  83 Linux


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1               2,048 3,907,026,943 3,907,024,896   7 NTFS / exFAT / HPFS


Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1    *             63   625,121,279   625,121,217   7 NTFS / exFAT / HPFS


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda2        502C12FB2C12DBB2                       ntfs       
/dev/sda3        8497084d-dd34-4b8c-b929-ad7e055e1ef5   ext4       
/dev/sda5        df29cc21-5b4e-488e-b823-5a3d252c0b8e   swap       
/dev/sda6        c381a985-289c-41ef-87dc-9236ccd527ad   ext4       
/dev/sdb1        10606CDB606CC954                       ntfs       Disque local
/dev/sdc1        583EB7327AEED5B0                       ntfs       Données sauvegardées

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 May  3 13:18 ata-PLEXTOR_BD-R_PX-B950SA_2512075_216145500538 -> ../../sr0
lrwxrwxrwx 1 root root  9 May  3 13:24 ata-SAMSUNG_HD103SJ_S246J1LS918961 -> ../../sda
lrwxrwxrwx 1 root root 10 May  3 13:26 ata-SAMSUNG_HD103SJ_S246J1LS918961-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May  3 13:24 ata-SAMSUNG_HD103SJ_S246J1LS918961-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May  3 13:24 ata-SAMSUNG_HD103SJ_S246J1LS918961-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 May  3 13:24 ata-SAMSUNG_HD103SJ_S246J1LS918961-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 May  3 13:24 ata-SAMSUNG_HD103SJ_S246J1LS918961-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 May  3 13:24 ata-SAMSUNG_HD204UI_S2H7J9CB504132 -> ../../sdb
lrwxrwxrwx 1 root root 10 May  3 13:26 ata-SAMSUNG_HD204UI_S2H7J9CB504132-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 May  3 13:24 ata-WDC_WD3200AAKS-00YGA0_WD-WCASE0003843 -> ../../sdc
lrwxrwxrwx 1 root root 10 May  3 13:26 ata-WDC_WD3200AAKS-00YGA0_WD-WCASE0003843-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 May  3 13:24 wwn-0x50014ee1008faa3b -> ../../sdc
lrwxrwxrwx 1 root root 10 May  3 13:26 wwn-0x50014ee1008faa3b-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 May  3 13:24 wwn-0x50024e900224dd5e -> ../../sda
lrwxrwxrwx 1 root root 10 May  3 13:26 wwn-0x50024e900224dd5e-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May  3 13:24 wwn-0x50024e900224dd5e-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 May  3 13:24 wwn-0x50024e900224dd5e-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 May  3 13:24 wwn-0x50024e900224dd5e-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 May  3 13:24 wwn-0x50024e900224dd5e-part6 -> ../../sda6
lrwxrwxrwx 1 root root  9 May  3 13:24 wwn-0x50024e92052788b4 -> ../../sdb
lrwxrwxrwx 1 root root 10 May  3 13:26 wwn-0x50024e92052788b4-part1 -> ../../sdb1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda3        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda6        /data                    ext4       (rw,relatime,data=ordered)


=========================== sda3/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
else
  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Linux Mint 18.3 MATE 64-bit' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-8497084d-dd34-4b8c-b929-ad7e055e1ef5' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
	else
	  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
	fi
        linux	/boot/vmlinuz-4.10.0-38-generic root=UUID=8497084d-dd34-4b8c-b929-ad7e055e1ef5 ro  quiet splash radeon.dpm=1 $vt_handoff
	initrd	/boot/initrd.img-4.10.0-38-generic
}
submenu 'Options avancées pour Linux Mint 18.3 MATE 64-bit' $menuentry_id_option 'gnulinux-advanced-8497084d-dd34-4b8c-b929-ad7e055e1ef5' {
	menuentry 'Linux Mint 18.3 MATE 64-bit, avec Linux 4.10.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-38-generic-advanced-8497084d-dd34-4b8c-b929-ad7e055e1ef5' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
		else
		  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
		fi
		echo	'Chargement de Linux 4.10.0-38-generic…'
	        linux	/boot/vmlinuz-4.10.0-38-generic root=UUID=8497084d-dd34-4b8c-b929-ad7e055e1ef5 ro  quiet splash radeon.dpm=1 $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-38-generic
	}
	menuentry 'Linux Mint 18.3 MATE 64-bit, with Linux 4.10.0-38-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-38-generic-init-upstart-8497084d-dd34-4b8c-b929-ad7e055e1ef5' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
		else
		  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
		fi
		echo	'Chargement de Linux 4.10.0-38-generic…'
	        linux	/boot/vmlinuz-4.10.0-38-generic root=UUID=8497084d-dd34-4b8c-b929-ad7e055e1ef5 ro  quiet splash radeon.dpm=1 $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-38-generic
	}
	menuentry 'Linux Mint 18.3 MATE 64-bit, with Linux 4.10.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-38-generic-recovery-8497084d-dd34-4b8c-b929-ad7e055e1ef5' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos3'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
		else
		  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
		fi
		echo	'Chargement de Linux 4.10.0-38-generic…'
	        linux	/boot/vmlinuz-4.10.0-38-generic root=UUID=8497084d-dd34-4b8c-b929-ad7e055e1ef5 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-38-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
	else
	  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos3'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3  8497084d-dd34-4b8c-b929-ad7e055e1ef5
	else
	  search --no-floppy --fs-uuid --set=root 8497084d-dd34-4b8c-b929-ad7e055e1ef5
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda3/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=8497084d-dd34-4b8c-b929-ad7e055e1ef5 /               ext4    errors=remount-ro 0       1
# /data was on /dev/sda6 during installation
UUID=c381a985-289c-41ef-87dc-9236ccd527ad /data           ext4    defaults        0       2
# swap was on /dev/sda5 during installation
UUID=df29cc21-5b4e-488e-b823-5a3d252c0b8e none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
--------------------------------------------------------------------------------

=================== sda3: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 635.128364563 = 681.963888640  boot/grub/grub.cfg                             1
 635.133609772 = 681.969520640  boot/grub/i386-pc/core.img                     1
 634.767639160 = 681.576562688  boot/vmlinuz-4.10.0-38-generic                 1
 634.767639160 = 681.576562688  vmlinuz                                        1
 625.048278809 = 671.140478976  boot/initrd.img-4.10.0-38-generic              4
 625.048278809 = 671.140478976  initrd.img                                     4

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda4

00000000  76 40 55 d4 ab 0e a0 7b  b4 77 2d c6 35 07 72 bc  |v@U....{.w-.5.r.|
00000010  b9 20 35 50 cc a7 12 f3  91 6e 0b fc f0 01 f3 ba  |. 5P.....n......|
00000020  5b 31 27 1a f8 bf d9 8a  83 88 e9 60 a6 7a 1b c6  |[1'........`.z..|
00000030  68 90 b6 05 80 f6 6b fb  a3 48 1b 71 94 e3 39 53  |h.....k..H.q..9S|
00000040  e9 6e 5f 0b 6e ed a7 94  d0 db c7 5f 21 a9 e6 6f  |.n_.n......_!..o|
00000050  c4 87 3b 77 1d a1 a1 ac  ac 2a e6 3d b7 34 ef 52  |..;w.....*.=.4.R|
00000060  2f 4f 26 41 b2 38 92 00  dd c1 f2 2c b3 be 30 ca  |/O&A.8.....,..0.|
00000070  25 b8 0b a1 8b 7e ec c0  0f 48 e7 69 b5 fb ff f4  |%....~...H.i....|
00000080  33 d7 b0 3c 47 10 11 1b  b6 75 61 b6 01 ee a9 58  |3..<G....ua....X|
00000090  ef f4 09 eb 9e 89 4f 99  e7 92 50 75 61 d9 8a 76  |......O...Pua..v|
000000a0  85 20 e3 73 19 01 9f 1f  9e 84 55 be 6d 40 34 7a  |. .s......U.m@4z|
000000b0  4a 9a ab 2a 74 6d c3 76  7c 5b 96 ba 1b 36 fc f7  |J..*tm.v|[...6..|
000000c0  08 e1 c1 9f 48 d7 4a 46  11 56 23 c3 73 81 d4 df  |....H.JF.V#.s...|
000000d0  f8 e0 8b 92 24 22 2e 30  2a b0 9d f0 8d 1c 09 42  |....$".0*......B|
000000e0  0e 17 6d 20 e1 ef bc 9d  29 99 25 08 55 57 d8 38  |..m ....).%.UW.8|
000000f0  0e 13 4f 8b 12 32 2c a3  9c d7 30 0e 53 ba 58 91  |..O..2,...0.S.X.|
00000100  f5 f5 2f c0 7f ff 99 49  29 8b 98 57 aa 71 99 43  |../....I)..W.q.C|
00000110  1e b5 49 87 e8 a8 f8 ea  7c c1 43 81 46 62 be 04  |..I.....|.C.Fb..|
00000120  1c 45 b7 40 58 40 fd f4  a5 f4 81 6c e7 ec 1d 96  |.E.@X@.....l....|
00000130  dc 36 09 81 d1 db df b8  33 0b b6 87 ff e7 5e 07  |.6......3.....^.|
00000140  33 d7 b3 8a 47 10 11 1c  07 39 94 fc 6d 81 b3 73  |3...G....9..m..s|
00000150  0f 5e 78 12 4f df ab c5  1f d7 5c 77 5e a8 82 f0  |.^x.O.....\w^...|
00000160  a2 44 25 f9 82 dc 8f 0a  8b e4 35 33 39 80 0b 31  |.D%.......539..1|
00000170  21 42 02 a3 14 90 9d 30  7e d2 99 94 3b de 17 08  |!B.....0~...;...|
00000180  54 04 af ad 5e 41 69 39  d0 46 ff 1a df 75 7e 41  |T...^Ai9.F...u~A|
00000190  60 7f 7e 82 93 85 c9 2a  aa 1d 78 96 60 76 58 76  |`.~....*..x.`vXv|
000001a0  09 c4 13 b6 88 a4 f0 3e  f0 41 46 c7 03 5b 0f 0a  |.......>.AF..[..|
000001b0  d3 82 5b 43 8f f0 fa 41  39 0d aa bf 26 a1 00 fe  |..[C...A9...&...|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 00 7d 00 00 ef  |............}...|
000001d0  ff ff 05 ef ff ff 02 00  7d 00 00 00 85 22 00 00  |........}...."..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/2632/mounts) leaked on lvs invocation. Parent PID 14380: bash
File descriptor 63 (pipe:[43301]) leaked on lvs invocation. Parent PID 14380: bash

ADDITIONAL INFORMATION :
=================== log of boot-repair 20180503_1324 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version :
glade2script version : 3.2.3~ppa4
File descriptor 9 (/proc/2632/mounts) leaked on lvs invocation. Parent PID 4587: /bin/sh
boot-repair is executed in installed-session (Linux Mint 18.3 Sylvia, sylvia, LinuxMint, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-38-generic root=UUID=8497084d-dd34-4b8c-b929-ad7e055e1ef5 ro quiet splash radeon.dpm=1 vt.handoff=7

=================== os-prober:
/dev/sda3:L'OS actuellement utilisé - Linux Mint 18.3 Sylvia CurrentSession:linux

=================== blkid:
/dev/sda2: UUID="502C12FB2C12DBB2" TYPE="ntfs" PARTUUID="91371d49-02"
/dev/sda3: UUID="8497084d-dd34-4b8c-b929-ad7e055e1ef5" TYPE="ext4" PARTUUID="91371d49-03"
/dev/sda5: UUID="df29cc21-5b4e-488e-b823-5a3d252c0b8e" TYPE="swap" PARTUUID="91371d49-05"
/dev/sda6: UUID="c381a985-289c-41ef-87dc-9236ccd527ad" TYPE="ext4" PARTUUID="91371d49-06"
/dev/sdb1: LABEL="Disque local" UUID="10606CDB606CC954" TYPE="ntfs" PARTUUID="ab6e1e73-01"
/dev/sdc1: LABEL="DonnM-CM-)es sauvegardM-CM-)es" UUID="583EB7327AEED5B0" TYPE="ntfs" PARTUUID="e7d7e7d7-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda2.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 nov.  24 15:31 grub.d
total 96
-rwxr-xr-x 1 root root  9791 nov.   5 16:01 00_header
-rwxr-xr-x 1 root root  6258 nov.   5 15:05 05_debian_theme
-rwxr-xr-x 1 root root  1180 oct.  25  2014 06_mint_theme
-rwxr-xr-x 1 root root 12552 nov.   5 16:01 10_linux
-rwxr-xr-x 1 root root 10634 oct.   1  2012 10_lupin
-rwxr-xr-x 1 root root 11082 nov.   5 16:01 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 nov.   5 16:01 30_os-prober
-rwxr-xr-x 1 root root  1418 nov.   5 16:01 30_uefi-firmware
-rwxr-xr-x 1 root root   214 nov.   5 16:01 40_custom
-rwxr-xr-x 1 root root   216 nov.   5 16:01 41_custom
-rw-r--r-- 1 root root   483 nov.   5 16:01 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.dpm=1"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda3	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.
sda6	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /data.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdb1.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sdc1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, no-os,	63 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:512:msdos:ATA SAMSUNG HD103SJ:;
2:358GB:658GB:300GB:ntfs::;
3:658GB:699GB:41.9GB:ext4::boot;
4:699GB:1000GB:301GB:::;
5:699GB:704GB:4194MB:linux-swap(v1)::;
6:704GB:1000GB:297GB:ext4::;

BYT;
/dev/sdb:2000GB:scsi:512:512:msdos:ATA SAMSUNG HD204UI:;
1:1049kB:2000GB:2000GB:ntfs::;

BYT;
/dev/sdc:320GB:scsi:512:512:msdos:ATA WDC WD3200AAKS-0:;
1:32.3kB:320GB:320GB:ntfs::boot;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sdb   disk          1,8T
sdb1  part ntfs     1,8T Disque local
sr0   rom          1024M
fd0   disk            4K
sdc   disk        298,1G
sdc1  part ntfs   298,1G Données sauvegardées
sda   disk        931,5G
sda4  part            1K
sda2  part ntfs   279,2G
sda5  part swap     3,9G
sda3  part ext4    39,1G
sda6  part ext4   276,2G

KNAME ROTA RO RM STATE   MOUNTPOINT
sdb      1  0  0 running
sdb1     1  0  0         /mnt/boot-sav/sdb1
sr0      1  0  1 running
fd0      1  0  1
sdc      1  0  0 running
sdc1     1  0  0         /mnt/boot-sav/sdc1
sda      1  0  0 running
sda4     1  0  0
sda2     1  0  0         /mnt/boot-sav/sda2
sda5     1  0  0         [SWAP]
sda3     1  0  0         /
sda6     1  0  0         /data


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4029748k,nr_inodes=1007437,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=817256k,mode=755)
/dev/sda3 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13634)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda6 on /data type ext4 (rw,relatime,data=ordered)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=817256k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdc1 on /mnt/boot-sav/sdc1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/fd0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd fd0 full fuse fw0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kfd kmsg lightnvm log lp0 mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda2 sda3 sda4 sda5 sda6 sdb sdb1 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom userio vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 f0 00 00 d8 a5 29  |........?......)|
00000020  00 00 00 00 80 00 80 00  ff 7f e6 22 00 00 00 00  |..........."....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  b2 db 12 2c fb 12 2c 50  |...........,..,P|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 77 e0 e8 00 00 00 00  |.........w......|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  54 c9 6c 60 db 6c 60 10  |........T.l`.l`.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 45 72  |t.............Er|
00000190  72 65 75 72 20 6c 65 63  74 75 72 65 20 64 69 73  |reur lecture dis|
000001a0  71 75 65 00 0d 0a 42 4f  4f 54 4d 47 52 20 61 62  |que...BOOTMGR ab|
000001b0  73 65 6e 74 00 0d 0a 42  4f 4f 54 4d 47 52 20 63  |sent...BOOTMGR c|
000001c0  6f 6d 70 72 65 73 73 82  00 0d 0a 43 74 72 6c 2b  |ompress....Ctrl+|
000001d0  41 6c 74 2b 53 75 70 70  72 20 70 6f 75 72 20 72  |Alt+Suppr pour r|
000001e0  65 64 82 6d 61 72 72 65  72 0d 0a 00 6f 20 72 65  |ed.marrer...o re|
000001f0  73 74 61 72 74 0d 0a 00  8c a4 b5 c9 00 00 55 aa  |start.........U.|
00000200

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  c0 97 42 25 00 00 00 00  |..........B%....|
00000030  04 00 00 00 00 00 00 00  7c 29 54 02 00 00 00 00  |........|)T.....|
00000040  f6 00 00 00 01 00 00 00  b0 d5 ee 7a 32 b7 3e 58  |...........z2.>X|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 d2 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  40 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |@.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a e9 6a 01  |U...h..fa.....j.|
00000110  90 90 66 60 1e 06 66 a1  11 00 66 03 06 1c 00 1e  |..f`..f...f.....|
00000120  66 68 00 00 00 00 66 50  06 53 68 01 00 68 10 00  |fh....fP.Sh..h..|
00000130  b4 42 8a 16 0e 00 16 1f  8b f4 cd 13 66 59 5b 5a  |.B..........fY[Z|
00000140  66 59 66 59 1f 0f 82 16  00 66 ff 06 11 00 03 16  |fYfY.....f......|
00000150  0f 00 8e c2 ff 0e 16 00  75 bc 07 1f 66 61 c3 a0  |........u...fa..|
00000160  f8 01 e8 08 00 a0 fb 01  e8 02 00 eb fe b4 01 8b  |................|
00000170  f0 ac 3c 00 74 09 b4 0e  bb 07 00 cd 10 eb f2 c3  |..<.t...........|
00000180  0d 0a 41 20 64 69 73 6b  20 72 65 61 64 20 65 72  |..A disk read er|
00000190  72 6f 72 20 6f 63 63 75  72 72 65 64 00 0d 0a 42  |ror occurred...B|
000001a0  4f 4f 54 4d 47 52 20 69  73 20 6d 69 73 73 69 6e  |OOTMGR is missin|
000001b0  67 00 0d 0a 42 4f 4f 54  4d 47 52 20 69 73 20 63  |g...BOOTMGR is c|
000001c0  6f 6d 70 72 65 73 73 65  64 00 0d 0a 50 72 65 73  |ompressed...Pres|
000001d0  73 20 43 74 72 6c 2b 41  6c 74 2b 44 65 6c 20 74  |s Ctrl+Alt+Del t|
000001e0  6f 20 72 65 73 74 61 72  74 0d 0a 00 00 00 00 00  |o restart.......|
000001f0  00 00 00 00 00 00 00 00  80 9d b2 ca 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     799M  9.4M  789M   2% /run
/dev/sda3      ext4       39G   28G  9.1G  76% /
tmpfs          tmpfs     3.9G   53M  3.9G   2% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/sda6      ext4      272G  258G  148M 100% /data
cgmfs          tmpfs     100K     0  100K   0% /run/cgmanager/fs
tmpfs          tmpfs     799M   28K  799M   1% /run/user/1000
/dev/sda2      fuseblk   280G  261G   19G  94% /mnt/boot-sav/sda2
/dev/sdb1      fuseblk   1.9T  1.9T  476M 100% /mnt/boot-sav/sdb1
/dev/sdc1      fuseblk   299G  298G  1.1G 100% /mnt/boot-sav/sdc1

=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x91371d49

Device     Boot      Start        End   Sectors   Size Id Type
/dev/sda2        698734592 1284265983 585531392 279.2G  7 HPFS/NTFS/exFAT
/dev/sda3  *    1284265984 1366187858  81921875  39.1G 83 Linux
/dev/sda4       1366190078 1953523711 587333634 280.1G  5 Extended
/dev/sda5       1366190080 1374382079   8192000   3.9G 82 Linux swap / Solaris
/dev/sda6       1374384128 1953523711 579139584 276.2G 83 Linux


Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xab6e1e73

Device     Boot Start        End    Sectors  Size Id Type
/dev/sdb1        2048 3907026943 3907024896  1.8T  7 HPFS/NTFS/exFAT


Disk /dev/sdc: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xe7d7e7d7

Device     Boot Start       End   Sectors   Size Id Type
/dev/sdc1  *       63 625121279 625121217 298.1G  7 HPFS/NTFS/exFAT




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (ATA SAMSUNG HD103SJ) !

Les fichiers de démarrage de [L'OS actuellement utilisé - Linux Mint 18.3 Sylvia] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.




paste2.org ko ()
http://paste.ubuntu.com/p/3NGP9b7rmG/
System: MATE 1.18.0 / Linux Mint 18.3 Sylvia
Mobo: GA-MA770T-UD3P
CPU: Quad core AMD Phenom II X4 965
Graphics: Graphics: Card: Advanced Micro Devices [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Audio: Card-1 Creative Labs EMU20k2 [X-Fi Titanium Series] / driver: snd_ctxfi / Card-2 Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
Ram: 8Go
mézig
Messages : 1818
Enregistré le : mar. 14 nov. 2017 14:40

Re: Message d'avertissement depuis Gparted

Message par mézig »

Je ne sais pas si le support d'installation de Windows fait comme avant une possibilité de reparer ou le mbr ou Windows lui meme
Sinon je ne vois pas d'autres solution de sauvegarder tes fichiers et réinstaller Windows , mais la c'est Mint qui ne demarrera plus
Intel Pentium Dual CPU E2140 -- Nvidia GF108 -- 4 Go de RAM -- Ubuntu 18.10 -- DEEPIN 15.11
Intel Pentium CPU 4405U @ 2.10GHz × 4 -- Intel HD Graphics 510 (Skylake GT1) -- 4 Go de RAM -- Ubuntu 19.04 -- Ubuntu 18.04 -- DEEPIN 15.11 avec partition de données commune
Lyacos
Messages : 130
Enregistré le : dim. 14 janv. 2018 10:39

Re: Message d'avertissement depuis Gparted

Message par Lyacos »

Pour Windows 10 j'ai essayé via le DVD, dans la ligne de commande j'ai mis

Code : Tout sélectionner

BootRec.exe /FixBoot
Marche pas.

Code : Tout sélectionner

BootRec.exe /fixmbr
Fonctionne mais ne change rien au problème.

Donc si je comprends bien, je vais devoir réinstaller Win10 sur l'espace non alloué qui fait à présent 300go et quelques, ensuite mettre mes données de mon installation Win10 actuelle vers la nouvelle, puis formater et depuis Gparted réalloué l'espace libre ? (mon dieu)

Pour Linux qui boot plus ça je sais le résoudre, depuis Gparted faut repasser Mint en boot.
System: MATE 1.18.0 / Linux Mint 18.3 Sylvia
Mobo: GA-MA770T-UD3P
CPU: Quad core AMD Phenom II X4 965
Graphics: Graphics: Card: Advanced Micro Devices [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Audio: Card-1 Creative Labs EMU20k2 [X-Fi Titanium Series] / driver: snd_ctxfi / Card-2 Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
Ram: 8Go
mézig
Messages : 1818
Enregistré le : mar. 14 nov. 2017 14:40

Re: Message d'avertissement depuis Gparted

Message par mézig »

Tu peux toujours lancer

Code : Tout sélectionner

sudo os-prober 
mais çette commande etant lancée par l'update-grub ,celui ci aurait vu W10
mais essayes quand meme rien que pour voir si os-prober est installé , le contraire m'étonnerais
Intel Pentium Dual CPU E2140 -- Nvidia GF108 -- 4 Go de RAM -- Ubuntu 18.10 -- DEEPIN 15.11
Intel Pentium CPU 4405U @ 2.10GHz × 4 -- Intel HD Graphics 510 (Skylake GT1) -- 4 Go de RAM -- Ubuntu 19.04 -- Ubuntu 18.04 -- DEEPIN 15.11 avec partition de données commune
Lyacos
Messages : 130
Enregistré le : dim. 14 janv. 2018 10:39

Re: Message d'avertissement depuis Gparted

Message par Lyacos »

J'ai fait ta commande et... rien ?

Code : Tout sélectionner

lyacos@lyacos-GA-MA770T-UD3P ~ $ sudo os-prober
[sudo] Mot de passe de lyacos : 
lyacos@lyacos-GA-MA770T-UD3P ~ $ 
System: MATE 1.18.0 / Linux Mint 18.3 Sylvia
Mobo: GA-MA770T-UD3P
CPU: Quad core AMD Phenom II X4 965
Graphics: Graphics: Card: Advanced Micro Devices [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Audio: Card-1 Creative Labs EMU20k2 [X-Fi Titanium Series] / driver: snd_ctxfi / Card-2 Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
Ram: 8Go
mézig
Messages : 1818
Enregistré le : mar. 14 nov. 2017 14:40

Re: Message d'avertissement depuis Gparted

Message par mézig »

Si tu es obligé de réinstaller sauves tes fichiers sur un autre disque ou créé une autre partition pour les acceillire ensuite tu supprimes toutes les partitios windows debenu inutilespour en reccréer qu'une qui acceuillera le nouveau W10
la partition que tu aura créé en ntfs pour sauvegarder tes données tu pourra la conserver telle qu'elle est et y acceder ensuite depuis les deux systeme

J'aurais du te le demander plus tot mais une capture de gparted aurait été utile, au moins pour montrer qu'il ya avait une autre partition Windows et ainsi te déconseiller de la supprimer puisse que c'était elle qui avait le secteur de boot

os-prober est installé et ne voit pas Windows et ne voit pas non plus LM ce qui est normal puisse que le systeme qui le lance n'apparait pas
Intel Pentium Dual CPU E2140 -- Nvidia GF108 -- 4 Go de RAM -- Ubuntu 18.10 -- DEEPIN 15.11
Intel Pentium CPU 4405U @ 2.10GHz × 4 -- Intel HD Graphics 510 (Skylake GT1) -- 4 Go de RAM -- Ubuntu 19.04 -- Ubuntu 18.04 -- DEEPIN 15.11 avec partition de données commune
zeb
Messages : 16098
Enregistré le : ven. 19 juin 2015 22:13
Localisation : plus ici

Re: Message d'avertissement depuis Gparted

Message par zeb »

Salut Lyacos ;)
S'il te plaît, change ton titre :(
Si ce n'est pas pour moi, fais le pour ceux qui se posent la même questions que toi, facilite leur la tache, aide les à trouver se sujet ;)

On pourrait lister plusieurs dizaines de messages d'erreurs venant de gparted !

Merci.
Avatar du membre
Lycaon
Messages : 726
Enregistré le : ven. 13 avr. 2018 00:53
Localisation : Belgique

Re: Message d'avertissement depuis Gparted

Message par Lycaon »

Bonjur,

Un truc à essayer : démarrer depuis le live-CD , en ligne de commande, essayer

Code : Tout sélectionner

sudo blkid
qui devrait renvoyer les numéros d'identification des partitions (UUID). Les comparer alors avec ceux qui se trouvent dans le fichier /etc/fstab du disque dur. Si les numéros ne correspondent pas, les corriger dans le fstab avant de tenter un redémarrage.
S'ils correspondent, le problème vient d'ailleurs.

Correction : blkid peut être lancé en simple utilisateur.
CM Gigabyte 970A UD3 // Proc. AMD Phenom™Ⅱ X4 965 // RAM 2×4 Go DDR3 G.Skill Extreme3 Ripjaws 1600MHz-PC12800 // CG Nvidia GK208 (GeForce GT730) 9020MHz 2Go // Écran Philips 240V 24" 1920×1200 // SSD (sda) 120Go // HDD (sdb) 2To // Lecteur-graveur DVD noname // Impr. Brother DCP-J562DW (/USB) // LM 18.3 Cinnamon 64 bits, noyau 4.15.0-42-generic x86_64 (64 bit)
Lyacos
Messages : 130
Enregistré le : dim. 14 janv. 2018 10:39

Re: Message d'avertissement depuis Gparted

Message par Lyacos »

@Lycaon: j'ai fait ta commande, j'ai pris une capture avec tous les UUID, ensuite... ben j'ai cherché sur Google, j'ai compris comment monter dans mnt, mais je ne trouve pas /etc/fstab, je ne sais rien, je suis débutant, je suis pourtant pas idiot mais je n'y arrive pas... tu peux me venir en aide ? Déjà je dois monter quoi ? La partition que j'ai effacé ou le système d'exploitation Win10 qui ne démarre plus ? Dans ma mémoire Linux été plus souple que ça, on pouvait formater des partitions inutiles ce qui ne cassait rien...

@mézig: je te réponds plus tard, je tente le truc de Lycaon.

@zebulon: voilà, c'est fait.
System: MATE 1.18.0 / Linux Mint 18.3 Sylvia
Mobo: GA-MA770T-UD3P
CPU: Quad core AMD Phenom II X4 965
Graphics: Graphics: Card: Advanced Micro Devices [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Audio: Card-1 Creative Labs EMU20k2 [X-Fi Titanium Series] / driver: snd_ctxfi / Card-2 Advanced Micro Devices [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series]
Ram: 8Go
Répondre