Résolu le 28-12-18 [ Résolu ] Plantage au démarrage de Linux

Assistance concernant Linux Mint
Avatar du membre
zeb
Administrateur du site
Messages : 16431
Enregistré le : ven. 19 juin 2015 22:13
Localisation : Au pays du mistral

Re: Message d'erreur au démarrage de Linux

Message par zeb »

Dernier message de la page précédente :

zebulon a écrit :Salut,
Ton titre "Message d'erreur au démarrage de Linux" sais tu combien de sorte de messages d'erreur il peut y avoir au démarrage ?
Le mieux est d'en citer une partie (si trop long) dans ton titre ;)

Merci !
Merci d'avoir pris en compte ma remarque :roll:
A lire avant de poster: https://www.cjoint.com/doc/19_12/ILAsoq ... -linux.pdf
Faire une signature: viewtopic.php?p=25608
Mettre l'attribut (résolu ou autre) a un sujet: viewtopic.php?f=2&t=2012&p=33386#p33386
Votre sujet n’apparaît pas: viewtopic.php?p=166241#p166241
Utiliser la barre de message (quote, code,...): viewtopic.php?f=2&t=319

LMDE4 Cinnamon sur tour perso

jumbo67
Messages : 156
Enregistré le : mer. 29 mars 2017 15:49

Re: Plantage au démarrage de Linux

Message par jumbo67 »

Bonjour arghlub.

Comment savoir si c'est le pare-feu qui pose ce problème? Je suppose qu'il faut que j'attende maintenant que le pare-feu est désactivé, de voir si je n'ai plus ce soucis à chaque démarrage de Linux. Mais comme je le disais je n'avais pas ce bug à chaque fois que j'ouvrais Linux. Cela pouvait durer 1 semaine(voir plus) sans que je n'ai ce soucis de plantage. Il y a t-il une autre solution que d'attendre pour voir si c'est bien le pare-feu qui pose problème?
Bon ben là pour info ça fait 3 fois (depuis que c'est désactivé) que j'ai démarré Linux et pas de soucis.
Je vais donc attendre au moins 1 semaine sans pare-feu pour voir ce qui se passe.
Jumbo67.
Modifié en dernier par jumbo67 le lun. 9 juil. 2018 17:40, modifié 1 fois.
laptop: Asus Notebook F3U/Dual Vista Familial Prémium 32b/LM 19.1 xfce 32b/ Processeur AMD Turion 64X2 Mobile Technology TL-56 1,80GHz/ Ram 2Go/DD 160Go.

jumbo67
Messages : 156
Enregistré le : mer. 29 mars 2017 15:49

Re: Plantage au démarrage de Linux

Message par jumbo67 »

Bonjour Zebulon.

De rien. Je ne savais pas trop ce qu'il fallait que je mette dans le titre. Je ne sais pas combien il peut y avoir de message d'erreur. Pour moi c'est des inscriptions qui défile sur fond noir et je ne sais pas les interprétés.
Bonne journée et bon week-end.
Jumbo67.
laptop: Asus Notebook F3U/Dual Vista Familial Prémium 32b/LM 19.1 xfce 32b/ Processeur AMD Turion 64X2 Mobile Technology TL-56 1,80GHz/ Ram 2Go/DD 160Go.

Avatar du membre
arghlub
modérateur
Messages : 8017
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Plantage au démarrage de Linux

Message par arghlub »

Si cela vient effectivement de ton pare-feu, il faudrait, si tu veux le remettre en route, allez jeter un œil dans sa config pour voir ce qui cloche. ;)
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 10 | MXlinux 19 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 | XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | LMint 19.3 | XFCE
Portable2 Lenovo G50-80 (boosté RAM+SSD) | CPU Intel I3-4005U | RAM 8Go | tripleBoot : LMint 18.3 | MXlinux 19 | LMint 19.3 | XFCE
─────( pour une informatique libre ! -membre de l' April.org )────────────────

Avatar du membre
zeb
Administrateur du site
Messages : 16431
Enregistré le : ven. 19 juin 2015 22:13
Localisation : Au pays du mistral

Re: Plantage au démarrage de Linux

Message par zeb »

jumbo67 a écrit :Pour moi c'est des inscriptions qui défile....
Oui mais si tu es dans ton coin et que souhaites te débrouiller tout seul, ce sont ces mots là qui te donneront réponse dans un moteur de recherche ;)
Donc toujours penser à ceux qui cherchent sans demander, c'est aussi une façon d'aider 8-)

Merci !
A lire avant de poster: https://www.cjoint.com/doc/19_12/ILAsoq ... -linux.pdf
Faire une signature: viewtopic.php?p=25608
Mettre l'attribut (résolu ou autre) a un sujet: viewtopic.php?f=2&t=2012&p=33386#p33386
Votre sujet n’apparaît pas: viewtopic.php?p=166241#p166241
Utiliser la barre de message (quote, code,...): viewtopic.php?f=2&t=319

LMDE4 Cinnamon sur tour perso

jumbo67
Messages : 156
Enregistré le : mer. 29 mars 2017 15:49

Re: Plantage au démarrage de Linux

Message par jumbo67 »

Bonjour arghlub.

Bon ben j'ai de nouveau eu un bug. Donc j'ai refais les commandes:

Code : Tout sélectionner

bruno@asus-f3u ~ $ sudo journalctl -r -p err
[sudo] Mot de passe de bruno : 
-- Logs begin at lun. 2018-07-09 17:15:41 CEST, end at lun. 2018-07-09 17:31:11 
juil. 09 17:17:32 asus-f3u pulseaudio[1546]: [pulseaudio] bluez5-util.c: GetMana
juil. 09 17:17:14 asus-f3u pulseaudio[1794]: [pulseaudio] pid.c: Daemon already 
juil. 09 17:17:14 asus-f3u pulseaudio[1788]: [pulseaudio] pid.c: Daemon already 
juil. 09 17:16:55 asus-f3u mdm[1128]: GLib-CRITICAL: g_key_file_free: assertion 
juil. 09 17:16:55 asus-f3u mdm[1128]: GLib-CRITICAL: g_key_file_get_string: asse
juil. 09 17:16:33 asus-f3u mdm[1128]: PAM adding faulty module: pam_kwallet.so
juil. 09 17:16:33 asus-f3u mdm[1128]: PAM unable to dlopen(pam_kwallet.so): /lib
juil. 09 17:16:09 asus-f3u wpa_supplicant[989]: dbus: Failed to construct signal
juil. 09 17:16:09 asus-f3u wpa_supplicant[989]: dbus: wpa_dbus_get_object_proper
juil. 09 17:16:07 asus-f3u NetworkManager[713]: nm_device_get_device_type: asser
juil. 09 17:16:05 asus-f3u ntpd[875]: error resolving pool ntp.ubuntu.com: Tempo
juil. 09 17:16:04 asus-f3u ntpd[875]: error resolving pool 3.ubuntu.pool.ntp.org
juil. 09 17:16:03 asus-f3u ntpd[875]: error resolving pool 2.ubuntu.pool.ntp.org
juil. 09 17:16:02 asus-f3u ntpd[875]: error resolving pool 1.ubuntu.pool.ntp.org
juil. 09 17:16:01 asus-f3u ntpd[875]: error resolving pool 0.ubuntu.pool.ntp.org
juil. 09 17:15:59 asus-f3u ntpdate[810]: name server cannot be used: Temporary f
juil. 09 17:15:42 asus-f3u kernel: ata1: softreset failed (device not ready)
juil. 09 17:15:41 asus-f3u kernel: Spectre V2 : LFENCE not serializing. Switchin
lines 1-19/19 (END)

Code : Tout sélectionner

bruno@asus-f3u ~ $ sudo dmesg -l err
[sudo] Mot de passe de bruno : 
[    0.035474] Spectre V2 : LFENCE not serializing. Switching to generic retpoline
[    2.984044] ata1: softreset failed (device not ready)
bruno@asus-f3u ~ $ 
Et là la commande c'est ''sudo dmesg'':

Code : Tout sélectionner

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x70000000-0xffb7ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f67b1000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 456320
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-130-generic root=UUID=ff53b06b-731b-468e-99f5-c9bad3afacf1 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0006ff98)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1759488K/1834200K available (8026K kernel code, 782K rwdata, 3176K rodata, 952K init, 800K bss, 74712K reserved, 0K cma-reserved, 921192K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1bb8000 - 0xc1ca6000   ( 952 kB)
                     .data : 0xc17d6cd8 - 0xc1bb6980   (3967 kB)
                     .text : 0xc1000000 - 0xc17d6cd8   (8027 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f6038000 soft=f603a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 2097152 bytes of page_ext
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using HPET reference calibration
[    0.000000] tsc: Detected 1795.347 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.016019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.69 BogoMIPS (lpj=7181388)
[    0.016025] pid_max: default: 32768 minimum: 301
[    0.016040] ACPI: Core revision 20150930
[    0.034870] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.034902] Security Framework initialized
[    0.034906] Yama: becoming mindful.
[    0.034936] AppArmor: AppArmor initialized
[    0.035000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.035004] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.035356] Initializing cgroup subsys io
[    0.035364] Initializing cgroup subsys memory
[    0.035377] Initializing cgroup subsys devices
[    0.035383] Initializing cgroup subsys freezer
[    0.035388] Initializing cgroup subsys net_cls
[    0.035393] Initializing cgroup subsys perf_event
[    0.035398] Initializing cgroup subsys net_prio
[    0.035405] Initializing cgroup subsys hugetlb
[    0.035409] Initializing cgroup subsys pids
[    0.035436] CPU: Physical Processor ID: 0
[    0.035438] CPU: Processor Core ID: 0
[    0.035446] mce: CPU supports 5 MCE banks
[    0.035455] LVT offset 0 assigned for vector 0xf9
[    0.035460] process: using AMD E400 aware idle routine
[    0.035467] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.035469] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.035474] Spectre V2 : LFENCE not serializing. Switching to generic retpoline
[    0.035477] Spectre V2 : Mitigation: Full generic retpoline
[    0.035480] Spectre V2 : Speculation control IBPB not-supported IBRS not-supported
[    0.035482] Spectre V2 : Filling RSB on context switch
[    0.036479] Freeing SMP alternatives memory: 32K
[    0.040011] ftrace: allocating 31517 entries in 62 pages
[    0.068146] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.068151] smpboot: Max logical packages: 1
[    0.068156] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.068551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.112000] smpboot: CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 (family: 0xf, model: 0x48, stepping: 0x2)
[    0.112000] Performance Events: AMD PMU driver.
[    0.112000] ... version:                0
[    0.112000] ... bit width:              48
[    0.112000] ... generic registers:      4
[    0.112000] ... value mask:             0000ffffffffffff
[    0.112000] ... max period:             00007fffffffffff
[    0.112000] ... fixed-purpose events:   0
[    0.112000] ... event mask:             000000000000000f
[    0.112000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.112000] CPU 1 irqstacks, hard=f6366000 soft=f6370000
[    0.112000] x86: Booting SMP configuration:
[    0.112000] .... node  #0, CPUs:      #1
[    0.020000] Initializing CPU#1
[    0.188048] x86: Booted up 1 node, 2 CPUs
[    0.188053] smpboot: Total of 2 processors activated (7181.68 BogoMIPS)
[    0.188440] process: System has AMD C1E enabled
[    0.188458] process: Switch to broadcast mode on CPU1
[    0.188591] process: Switch to broadcast mode on CPU0
[    0.188591] devtmpfs: initialized
[    0.188591] evm: security.selinux
[    0.188591] evm: security.SMACK64
[    0.188591] evm: security.SMACK64EXEC
[    0.188591] evm: security.SMACK64TRANSMUTE
[    0.188591] evm: security.SMACK64MMAP
[    0.188591] evm: security.ima
[    0.188591] evm: security.capability
[    0.188609] PM: Registering ACPI NVS region [mem 0x6ff98000-0x6ff9ffff] (32768 bytes)
[    0.188609] PM: Registering ACPI NVS region [mem 0x6ffae000-0x6ffeffff] (270336 bytes)
[    0.188609] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.188609] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.188609] pinctrl core: initialized pinctrl subsystem
[    0.188609] RTC time: 15:15:29, date: 07/09/18
[    0.188609] NET: Registered protocol family 16
[    0.188829] EISA bus registered
[    0.200005] cpuidle: using governor ladder
[    0.212007] cpuidle: using governor menu
[    0.212013] PCCT header not found.
[    0.212022] node 0 link 0: io port [1000, ffffff]
[    0.212027] TOM: 0000000080000000 aka 2048M
[    0.212031] node 0 link 0: mmio [bbf00000, dbeeffff]
[    0.212035] node 0 link 0: mmio [80000000, bbefffff]
[    0.212038] node 0 link 0: mmio [e0000000, efffffff]
[    0.212041] node 0 link 0: mmio [dbef0000, dfffffff]
[    0.212044] node 0 link 0: mmio [a0000, bffff]
[    0.212048] node 0 link 0: mmio [f0000000, ffffffff]
[    0.212052] bus: [bus 00-ff] on node 0 link 0
[    0.212054] bus: 00 [io  0x0000-0xffff]
[    0.212057] bus: 00 [mem 0x80000000-0xdfffffff]
[    0.212060] bus: 00 [mem 0xe0000000-0xfcffffffff]
[    0.212062] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.212153] Simple Boot Flag at 0x52 set to 0x1
[    0.212206] ACPI: bus type PCI registered
[    0.212210] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.212342] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.212347] PCI: not using MMCONFIG
[    0.214078] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.214145] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[    0.214147] PCI: Using configuration type 1 for base access
[    0.214333] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.214335] mtrr: probably your BIOS does not setup all CPUs.
[    0.214336] mtrr: corrected configuration.
[    0.228197] ACPI: Added _OSI(Module Device)
[    0.228200] ACPI: Added _OSI(Processor Device)
[    0.228203] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.228206] ACPI: Added _OSI(Processor Aggregator Device)
[    0.229728] ACPI : EC: EC description table is found, configuring boot EC
[    0.229936] ACPI : EC: EC started
[    0.232254] ACPI: Executed 3 blocks of module-level executable AML code
[    0.240464] ACPI: Interpreter enabled
[    0.240503] ACPI: (supports S0 S3 S4 S5)
[    0.240506] ACPI: Using IOAPIC for interrupt routing
[    0.240677] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.241623] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.241625] PCI: Using MMCONFIG for extended config space
[    0.241634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.250542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.250552] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.250560] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.250670] acpi PNP0A03:00: host bridge window expanded to [mem 0x70000000-0xffffffff window]; [mem 0xc0000000-0xc00000fd window] ignored
[    0.250947] PCI host bridge to bus 0000:00
[    0.250952] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.250956] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.250960] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.250963] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.250967] pci_bus 0000:00: root bus resource [mem 0x70000000-0xffffffff window]
[    0.250971] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.250984] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[    0.251147] pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
[    0.251306] pci 0000:00:04.0: [1002:7914] type 01 class 0x060400
[    0.251351] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.251422] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.251509] pci 0000:00:05.0: [1002:7915] type 01 class 0x060400
[    0.251552] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.251617] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.251704] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
[    0.251747] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.251812] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.251912] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[    0.251941] pci 0000:00:12.0: reg 0x10: [io  0xe800-0xe807]
[    0.251954] pci 0000:00:12.0: reg 0x14: [io  0xe400-0xe403]
[    0.251966] pci 0000:00:12.0: reg 0x18: [io  0xe000-0xe007]
[    0.251979] pci 0000:00:12.0: reg 0x1c: [io  0xdc00-0xdc03]
[    0.251992] pci 0000:00:12.0: reg 0x20: [io  0xd800-0xd80f]
[    0.252011] pci 0000:00:12.0: reg 0x24: [mem 0xfebffc00-0xfebfffff]
[    0.252039] pci 0000:00:12.0: set SATA to AHCI mode
[    0.252188] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[    0.252209] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[    0.252381] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.252471] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[    0.252492] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[    0.252660] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.252749] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[    0.252770] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[    0.252937] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.253023] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[    0.253043] pci 0000:00:13.3: reg 0x10: [mem 0xfebfb000-0xfebfbfff]
[    0.253209] pci 0000:00:13.3: System wakeup disabled by ACPI
[    0.253298] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[    0.253319] pci 0000:00:13.4: reg 0x10: [mem 0xfebfa000-0xfebfafff]
[    0.253486] pci 0000:00:13.4: System wakeup disabled by ACPI
[    0.253579] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[    0.253611] pci 0000:00:13.5: reg 0x10: [mem 0xfebff800-0xfebff8ff]
[    0.253697] pci 0000:00:13.5: supports D1 D2
[    0.253701] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.253814] pci 0000:00:13.5: System wakeup disabled by ACPI
[    0.253906] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.253940] pci 0000:00:14.0: reg 0x10: [io  0x0b00-0x0b0f]
[    0.254144] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[    0.254164] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.254178] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.254190] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.254203] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.254216] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.254242] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.254245] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.254249] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.254252] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.254391] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.254425] pci 0000:00:14.2: reg 0x10: [mem 0xfebf4000-0xfebf7fff 64bit]
[    0.254499] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.254565] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.254650] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[    0.254856] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.254960] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.255051] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.255185] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.255313] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.255444] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.255656] pci 0000:01:05.0: [1002:791f] type 00 class 0x030000
[    0.255673] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.255683] pci 0000:01:05.0: reg 0x18: [mem 0xfd7f0000-0xfd7fffff 64bit]
[    0.255690] pci 0000:01:05.0: reg 0x20: [io  0x8800-0x88ff]
[    0.255697] pci 0000:01:05.0: reg 0x24: [mem 0xfd600000-0xfd6fffff]
[    0.255719] pci 0000:01:05.0: supports D1 D2
[    0.255812] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.255818] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.255822] pci 0000:00:01.0:   bridge window [mem 0xfd500000-0xfd7fffff]
[    0.255828] pci 0000:00:01.0:   bridge window [mem 0xbbf00000-0xdbefffff 64bit pref]
[    0.255937] acpiphp: Slot [1] registered
[    0.255944] pci 0000:00:04.0: PCI bridge to [bus 02-04]
[    0.255950] pci 0000:00:04.0:   bridge window [io  0x9000-0xafff]
[    0.255954] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfe7fffff]
[    0.255960] pci 0000:00:04.0:   bridge window [mem 0xdbf00000-0xdfefffff 64bit pref]
[    0.256061] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[    0.256101] pci 0000:05:00.0: reg 0x10: [io  0xb800-0xb8ff]
[    0.256130] pci 0000:05:00.0: reg 0x18: [mem 0xfe8ff000-0xfe8fffff 64bit]
[    0.256162] pci 0000:05:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8effff pref]
[    0.256228] pci 0000:05:00.0: supports D1 D2
[    0.256232] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.256351] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.256363] pci 0000:00:05.0: PCI bridge to [bus 05]
[    0.256368] pci 0000:00:05.0:   bridge window [io  0xb000-0xbfff]
[    0.256373] pci 0000:00:05.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.256463] pci 0000:06:00.0: [168c:001c] type 00 class 0x020000
[    0.256503] pci 0000:06:00.0: reg 0x10: [mem 0xfe9f0000-0xfe9fffff 64bit]
[    0.256685] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.256694] pci 0000:00:07.0: PCI bridge to [bus 06]
[    0.256701] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.256822] pci 0000:07:01.0: [1180:0832] type 00 class 0x0c0010
[    0.256849] pci 0000:07:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.256852] pci 0000:07:01.0: MMC cards are now supported by standard SDHCI controller
[    0.256871] pci 0000:07:01.0: reg 0x10: [mem 0xfeaff800-0xfeafffff]
[    0.256974] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[    0.257015] pci 0000:07:01.0: System wakeup disabled by ACPI
[    0.257104] pci 0000:07:01.1: [1180:0822] type 00 class 0x080500
[    0.257139] pci 0000:07:01.1: reg 0x10: [mem 0xfeaff400-0xfeaff4ff]
[    0.257242] pci 0000:07:01.1: supports D1 D2
[    0.257245] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257369] pci 0000:07:01.2: [1180:0592] type 00 class 0x088000
[    0.257404] pci 0000:07:01.2: reg 0x10: [mem 0xfeafec00-0xfeafecff]
[    0.257507] pci 0000:07:01.2: supports D1 D2
[    0.257511] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257679] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode)
[    0.257688] pci 0000:00:14.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.257695] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.257699] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.257703] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.257707] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.257711] pci 0000:00:14.4:   bridge window [mem 0x70000000-0xffffffff window] (subtractive decode)
[    0.257733] pci_bus 0000:00: on NUMA node 0
[    0.258653] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.258734] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.258811] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.258888] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.258965] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 10 11 12 14 15)
[    0.259042] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[    0.259114] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.259192] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.259462] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.259601] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.259815] vgaarb: setting as boot device: PCI:0000:01:05.0
[    0.259815] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.259815] vgaarb: loaded
[    0.259815] vgaarb: bridge control possible 0000:01:05.0
[    0.260500] SCSI subsystem initialized
[    0.260559] libata version 3.00 loaded.
[    0.260559] ACPI: bus type USB registered
[    0.260559] usbcore: registered new interface driver usbfs
[    0.260559] usbcore: registered new interface driver hub
[    0.260559] usbcore: registered new device driver usb
[    0.260559] PCI: Using ACPI for IRQ routing
[    0.260559] PCI: pci_cache_line_size set to 64 bytes
[    0.260559] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.260559] e820: reserve RAM buffer [mem 0x6ff98000-0x6fffffff]
[    0.260559] NetLabel: Initializing
[    0.260559] NetLabel:  domain hash size = 128
[    0.260559] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.260559] NetLabel:  unlabeled traffic allowed by default
[    0.260559] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.260559] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.262194] clocksource: Switched to clocksource hpet
[    0.274748] AppArmor: AppArmor Filesystem Enabled
[    0.274893] pnp: PnP ACPI init
[    0.275158] system 00:00: [mem 0x70000000-0x7fffffff] has been reserved
[    0.275166] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.275258] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.275423] system 00:02: [io  0x0250-0x0253] has been reserved
[    0.275428] system 00:02: [io  0x0256-0x025f] has been reserved
[    0.275434] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.275438] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.275443] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.275549] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.275828] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.275833] system 00:04: [io  0x040b] has been reserved
[    0.275837] system 00:04: [io  0x04d6] has been reserved
[    0.275841] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.275845] system 00:04: [io  0x0c14] has been reserved
[    0.275849] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.275853] system 00:04: [io  0x0c52] has been reserved
[    0.275857] system 00:04: [io  0x0c6c] has been reserved
[    0.275861] system 00:04: [io  0x0c6f] has been reserved
[    0.275866] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.275870] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.275874] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.275878] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.275883] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.275887] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.275891] system 00:04: [io  0x0b10-0x0b1f] has been reserved
[    0.275895] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.275899] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.275904] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.275909] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.275914] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[    0.275919] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276029] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.276134] pnp 00:06: Plug and Play ACPI device, IDs AUI1307 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.276306] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.276311] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.276701] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.276706] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.276710] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.276715] system 00:08: [mem 0x00100000-0x6fffffff] could not be reserved
[    0.276719] system 00:08: [mem 0xe0000000-0xffffffff] could not be reserved
[    0.276724] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.276877] pnp: PnP ACPI: found 9 devices
[    0.276884] PnPBIOS: Disabled by ACPI PNP
[    0.316685] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.316729] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.316735] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.316740] pci 0000:00:01.0:   bridge window [mem 0xfd500000-0xfd7fffff]
[    0.316745] pci 0000:00:01.0:   bridge window [mem 0xbbf00000-0xdbefffff 64bit pref]
[    0.316750] pci 0000:00:04.0: PCI bridge to [bus 02-04]
[    0.316754] pci 0000:00:04.0:   bridge window [io  0x9000-0xafff]
[    0.316759] pci 0000:00:04.0:   bridge window [mem 0xfd800000-0xfe7fffff]
[    0.316763] pci 0000:00:04.0:   bridge window [mem 0xdbf00000-0xdfefffff 64bit pref]
[    0.316769] pci 0000:00:05.0: PCI bridge to [bus 05]
[    0.316773] pci 0000:00:05.0:   bridge window [io  0xb000-0xbfff]
[    0.316778] pci 0000:00:05.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.316786] pci 0000:00:07.0: PCI bridge to [bus 06]
[    0.316790] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.316798] pci 0000:00:14.4: PCI bridge to [bus 07]
[    0.316805] pci 0000:00:14.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.316819] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.316823] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.316827] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.316830] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.316835] pci_bus 0000:00: resource 8 [mem 0x70000000-0xffffffff window]
[    0.316839] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
[    0.316842] pci_bus 0000:01: resource 1 [mem 0xfd500000-0xfd7fffff]
[    0.316847] pci_bus 0000:01: resource 2 [mem 0xbbf00000-0xdbefffff 64bit pref]
[    0.316850] pci_bus 0000:02: resource 0 [io  0x9000-0xafff]
[    0.316854] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfe7fffff]
[    0.316858] pci_bus 0000:02: resource 2 [mem 0xdbf00000-0xdfefffff 64bit pref]
[    0.316862] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
[    0.316866] pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.316870] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.316874] pci_bus 0000:07: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.316878] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.316882] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.316886] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.316889] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.316893] pci_bus 0000:07: resource 8 [mem 0x70000000-0xffffffff window]
[    0.316944] NET: Registered protocol family 2
[    0.317184] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.317214] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.317259] TCP: Hash tables configured (established 8192 bind 8192)
[    0.317311] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.317323] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.317391] NET: Registered protocol family 1
[    0.688278] pci 0000:01:05.0: Video device with shadowed ROM
[    0.688297] PCI: CLS 64 bytes, default 64
[    0.688396] Unpacking initramfs...
[    1.828540] Freeing initrd memory: 39188K
[    1.828778] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e0fe124fa, max_idle_ns: 440795251783 ns
[    1.828807] Scanning for low memory corruption every 60 seconds
[    1.829444] audit: initializing netlink subsys (disabled)
[    1.829474] audit: type=2000 audit(1531149330.828:1): initialized
[    1.829965] Initialise system trusted keyring
[    1.830187] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.834054] zbud: loaded
[    1.834373] VFS: Disk quotas dquot_6.6.0
[    1.834457] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.834997] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.835625] fuse init (API version 7.23)
[    1.835957] Key type big_key registered
[    1.835993] Allocating IMA MOK and blacklist keyrings.
[    1.837156] Key type asymmetric registered
[    1.837163] Asymmetric key parser 'x509' registered
[    1.837197] bounce: pool size: 64 pages
[    1.837293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.837359] io scheduler noop registered
[    1.837365] io scheduler deadline registered (default)
[    1.837440] io scheduler cfq registered
[    1.838021] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.838037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.838100] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.838103] vesafb: scrolling: redraw
[    1.838106] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.838137] vesafb: framebuffer at 0xc0000000, mapped to 0xf8600000, using 3072k, total 3072k
[    1.838349] Console: switching to colour frame buffer device 128x48
[    1.838385] fb0: VESA VGA frame buffer device
[    1.838600] ACPI: AC Adapter [AC0] (on-line)
[    1.838736] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.838743] ACPI: Power Button [PWRB]
[    1.838827] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.838831] ACPI: Sleep Button [SLPB]
[    1.838924] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.840144] ACPI: Lid Switch [LID]
[    1.840261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.840268] ACPI: Power Button [PWRF]
[    1.840342] ACPI: processor limited to max C-state 1
[    1.843263] thermal LNXTHERM:00: registered as thermal_zone0
[    1.843266] ACPI: Thermal Zone [THRM] (45 C)
[    1.843345] GHES: HEST is not enabled!
[    1.843545] isapnp: Scanning for PnP cards...
[    1.843567] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.846862] Linux agpgart interface v0.103
[    1.850422] loop: module loaded
[    1.850978] libphy: Fixed MDIO Bus: probed
[    1.850984] tun: Universal TUN/TAP device driver, 1.6
[    1.850986] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.851077] PPP generic driver version 2.4.2
[    1.851206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.851214] ehci-pci: EHCI PCI platform driver
[    1.851424] ehci-pci 0000:00:13.5: EHCI Host Controller
[    1.851435] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[    1.851443] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    1.851459] ehci-pci 0000:00:13.5: debug port 1
[    1.851527] ehci-pci 0000:00:13.5: irq 19, io mem 0xfebff800
[    1.860061] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    1.860170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.860174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.860178] usb usb1: Product: EHCI Host Controller
[    1.860181] usb usb1: Manufacturer: Linux 4.4.0-130-generic ehci_hcd
[    1.860185] usb usb1: SerialNumber: 0000:00:13.5
[    1.860433] hub 1-0:1.0: USB hub found
[    1.860448] hub 1-0:1.0: 10 ports detected
[    1.860928] ehci-platform: EHCI generic platform driver
[    1.860960] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.860967] ohci-pci: OHCI PCI platform driver
[    1.861100] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.861110] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.861149] ohci-pci 0000:00:13.0: irq 16, io mem 0xfebfe000
[    1.877066] ACPI: Battery Slot [BAT0] (battery present)
[    1.924111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.924116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.924120] usb usb2: Product: OHCI PCI host controller
[    1.924123] usb usb2: Manufacturer: Linux 4.4.0-130-generic ohci_hcd
[    1.924126] usb usb2: SerialNumber: 0000:00:13.0
[    1.924385] hub 2-0:1.0: USB hub found
[    1.924399] hub 2-0:1.0: 2 ports detected
[    1.924715] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.924726] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.924775] ohci-pci 0000:00:13.1: irq 17, io mem 0xfebfd000
[    1.984098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.984102] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.984105] usb usb3: Product: OHCI PCI host controller
[    1.984108] usb usb3: Manufacturer: Linux 4.4.0-130-generic ohci_hcd
[    1.984111] usb usb3: SerialNumber: 0000:00:13.1
[    1.984316] hub 3-0:1.0: USB hub found
[    1.984329] hub 3-0:1.0: 2 ports detected
[    1.984596] ohci-pci 0000:00:13.2: OHCI PCI host controller
[    1.984605] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.984640] ohci-pci 0000:00:13.2: irq 18, io mem 0xfebfc000
[    2.044091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.044095] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.044098] usb usb4: Product: OHCI PCI host controller
[    2.044101] usb usb4: Manufacturer: Linux 4.4.0-130-generic ohci_hcd
[    2.044104] usb usb4: SerialNumber: 0000:00:13.2
[    2.044307] hub 4-0:1.0: USB hub found
[    2.044321] hub 4-0:1.0: 2 ports detected
[    2.044577] ohci-pci 0000:00:13.3: OHCI PCI host controller
[    2.044586] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[    2.044609] ohci-pci 0000:00:13.3: irq 17, io mem 0xfebfb000
[    2.104096] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.104100] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.104103] usb usb5: Product: OHCI PCI host controller
[    2.104106] usb usb5: Manufacturer: Linux 4.4.0-130-generic ohci_hcd
[    2.104110] usb usb5: SerialNumber: 0000:00:13.3
[    2.104321] hub 5-0:1.0: USB hub found
[    2.104335] hub 5-0:1.0: 2 ports detected
[    2.104599] ohci-pci 0000:00:13.4: OHCI PCI host controller
[    2.104610] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[    2.104641] ohci-pci 0000:00:13.4: irq 18, io mem 0xfebfa000
[    2.154610] isapnp: No Plug & Play device found
[    2.164100] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.164104] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.164108] usb usb6: Product: OHCI PCI host controller
[    2.164111] usb usb6: Manufacturer: Linux 4.4.0-130-generic ohci_hcd
[    2.164114] usb usb6: SerialNumber: 0000:00:13.4
[    2.164359] hub 6-0:1.0: USB hub found
[    2.164373] hub 6-0:1.0: 2 ports detected
[    2.164578] ohci-platform: OHCI generic platform driver
[    2.164603] uhci_hcd: USB Universal Host Controller Interface driver
[    2.164752] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.166935] i8042: Detected active multiplexing controller, rev 1.1
[    2.168933] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.168941] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.169017] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.169089] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.169158] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.169460] mousedev: PS/2 mouse device common for all mice
[    2.169932] rtc_cmos 00:01: RTC can wake from S4
[    2.170132] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.170163] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.170182] i2c /dev entries driver
[    2.170303] device-mapper: uevent: version 1.0.3
[    2.170454] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.170504] platform eisa.0: Probing EISA bus 0
[    2.170508] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.170513] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.170517] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.170521] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.170524] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.170528] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.170532] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.170536] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.170540] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.170544] platform eisa.0: EISA: Detected 0 cards
[    2.170567] cpufreq-nforce2: No nForce2 chipset.
[    2.170579] ledtrig-cpu: registered to indicate activity on CPUs
[    2.171135] NET: Registered protocol family 10
[    2.171573] NET: Registered protocol family 17
[    2.171601] Key type dns_resolver registered
[    2.171980] Using IPI No-Shortcut mode
[    2.172348] registered taskstats version 1
[    2.172377] Loading compiled-in X.509 certificates
[    2.176203] usb 1-7: new high-speed USB device number 2 using ehci-pci
[    2.176777] Loaded X.509 cert 'Build time autogenerated kernel key: a5c9f92ab151c0a4f5eec2d789eb4b8ccd31c044'
[    2.176806] zswap: loaded using pool lzo/zbud
[    2.180903] Key type trusted registered
[    2.188330] Key type encrypted registered
[    2.188347] AppArmor: AppArmor sha1 policy hashing enabled
[    2.188354] ima: No TPM chip found, activating TPM-bypass!
[    2.188368] ima: Allocated hash algorithm: sha1
[    2.188394] evm: HMAC attrs: 0x1
[    2.188885]   Magic number: 10:990:284
[    2.189026] rtc_cmos 00:01: setting system clock to 2018-07-09 15:15:31 UTC (1531149331)
[    2.189426] powernow_k8: fid 0xa (1800 MHz), vid 0x12
[    2.189432] powernow_k8: fid 0x8 (1600 MHz), vid 0x14
[    2.189435] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[    2.189472] powernow_k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00)
[    2.189484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.189486] EDD information not available.
[    2.189591] PM: Hibernation image not present or could not be loaded.
[    2.190315] Freeing unused kernel memory: 952K
[    2.205130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.208140] Write protecting the kernel text: 8028k
[    2.208190] Write protecting the kernel read-only data: 3184k
[    2.208192] NX-protecting the kernel data: 6308k
[    2.231096] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.231262] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.231311] random: systemd-udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.232499] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.232616] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.232950] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.233074] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.233193] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.233314] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.233436] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)
[    2.310480] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.313702] usb 1-7: New USB device found, idVendor=05e1, idProduct=0501
[    2.313711] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.313715] usb 1-7: Product: USB 2.0 Image Capture Controller
[    2.313718] usb 1-7: Manufacturer: Syntek Semiconductor
[    2.316160] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.333779] acpi device:05: registered as cooling_device2
[    2.333894] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8
[    2.349914] [drm] Initialized drm 1.1.0 20060810
[    2.368512] ahci 0000:00:12.0: version 3.0
[    2.368680] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    2.368791] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.368797] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
[    2.391222] sdhci: Secure Digital Host Controller Interface driver
[    2.391228] sdhci: Copyright(c) Pierre Ossman
[    2.420224] scsi host0: ahci
[    2.436150] scsi host1: ahci
[    2.455622] sdhci-pci 0000:07:01.1: SDHCI controller found [1180:0822] (rev 22)
[    2.456765] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.462410] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.462428] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.468693] r8169 0000:05:00.0 eth0: RTL8168b/8111b at 0xf844e000, 00:1b:fc:dc:2e:29, XID 18000000 IRQ 27
[    2.468701] r8169 0000:05:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    2.470768] sdhci-pci 0000:07:01.1: No vmmc regulator found
[    2.470776] sdhci-pci 0000:07:01.1: No vqmmc regulator found
[    2.471779] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.477064] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    2.482779] mmc0: SDHCI controller on PCI [0000:07:01.1] using DMA
[    2.486812] scsi host2: ahci
[    2.495481] scsi host3: ahci
[    2.495636] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
[    2.495641] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
[    2.495646] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
[    2.495650] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
[    2.502054] scsi host4: pata_atiixp
[    2.508077] scsi host5: pata_atiixp
[    2.508232] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    2.508236] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    2.514089] [drm] radeon kernel modesetting enabled.
[    2.514215] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    2.514217] fb: switching to radeondrmfb from VESA VGA
[    2.514268] Console: switching to colour dummy device 80x25
[    2.515025] [drm] initializing kernel modesetting (RS690 0x1002:0x791F 0x1043:0x14F2).
[    2.515044] [drm] register mmio base: 0xFD7F0000
[    2.515046] [drm] register mmio size: 65536
[    2.516231] ATOM BIOS: ATI
[    2.516263] radeon 0000:01:05.0: VRAM: 256M 0x0000000070000000 - 0x000000007FFFFFFF (256M used)
[    2.516267] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[    2.516299] [drm] Detected VRAM RAM=256M, BAR=256M
[    2.516301] [drm] RAM width 128bits DDR
[    2.516385] [TTM] Zone  kernel: Available graphics memory: 439234 kiB
[    2.516387] [TTM] Zone highmem: Available graphics memory: 899830 kiB
[    2.516390] [TTM] Initializing pool allocator
[    2.516401] [TTM] Initializing DMA pool allocator
[    2.516440] [drm] radeon: 256M of VRAM memory ready
[    2.516443] [drm] radeon: 512M of GTT memory ready.
[    2.516460] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.529261] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    2.529270] [drm] PCIE GART of 512M enabled (table at 0x0000000035300000).
[    2.529305] radeon 0000:01:05.0: WB enabled
[    2.529310] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf5279000
[    2.529314] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.529316] [drm] Driver supports precise vblank timestamp query.
[    2.529319] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[    2.529368] radeon 0000:01:05.0: radeon: using MSI.
[    2.529395] [drm] radeon: irq initialized.
[    2.529407] [drm] Loading RS690/RS740 Microcode
[    2.529660] [drm] radeon: ring at 0x0000000080001000
[    2.529680] [drm] ring test succeeded in 1 usecs
[    2.529886] [drm] ib test succeeded in 0 usecs
[    2.532437] [drm] Radeon Display Connectors
[    2.532442] [drm] Connector 0:
[    2.532444] [drm]   VGA-1
[    2.532448] [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[    2.532450] [drm]   Encoders:
[    2.532452] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.532454] [drm] Connector 1:
[    2.532456] [drm]   LVDS-1
[    2.532459] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[    2.532460] [drm]   Encoders:
[    2.532462] [drm]     LCD1: INTERNAL_LVTM1
[    2.532464] [drm] Connector 2:
[    2.532466] [drm]   SVIDEO-1
[    2.532467] [drm]   Encoders:
[    2.532469] [drm]     TV1: INTERNAL_KLDSCP_DAC1
[    2.532470] [drm] Connector 3:
[    2.532472] [drm]   DVI-D-1
[    2.532474] [drm]   HPD2
[    2.532477] [drm]   DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c
[    2.532478] [drm]   Encoders:
[    2.532480] [drm]     DFP2: INTERNAL_DDI
[    2.541154] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    2.552118] firewire_ohci 0000:07:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    2.676529] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
[    2.692464] ata5.00: configured for UDMA/33
[    2.812056] ata3: SATA link down (SStatus 0 SControl 300)
[    2.812099] ata2: SATA link down (SStatus 0 SControl 300)
[    2.820062] ata4: SATA link down (SStatus 0 SControl 300)
[    2.984044] ata1: softreset failed (device not ready)
[    2.984049] ata1: applying PMP SRST workaround and retrying
[    3.052174] firewire_core 0000:07:01.0: created device fw0: GUID 00e01800039a8c74, S400
[    3.061837] [drm] fb mappable at 0xC0040000
[    3.061840] [drm] vram apper at 0xC0000000
[    3.061842] [drm] size 4096000
[    3.061845] [drm] fb depth is 24
[    3.061846] [drm]    pitch is 5120
[    3.061992] fbcon: radeondrmfb (fb0) is primary device
[    3.062119] Console: switching to colour frame buffer device 160x50
[    3.062167] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    3.072049] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:05.0 on minor 0
[    3.156056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.157144] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[    3.157149] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.157154] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    3.158391] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    3.158395] ata1.00: configured for UDMA/100
[    3.158700] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 C70P PQ: 0 ANSI: 5
[    3.159219] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    3.159286] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.159319] sd 0:0:0:0: [sda] Write Protect is off
[    3.159325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.159358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.163198] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WR02 PQ: 0 ANSI: 5
[    3.187103] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.187108] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.187370] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.187582] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    3.556780] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input13
[    3.583271]  sda: sda1 sda2 sda3 < sda5 >
[    3.584030] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.216028] random: nonblocking pool is initialized
[    5.216059] raid6: mmxx1    gen()  1474 MB/s
[    5.284014] raid6: mmxx2    gen()  2618 MB/s
[    5.352024] raid6: sse1x1   gen()  1509 MB/s
[    5.420016] raid6: sse1x2   gen()  2344 MB/s
[    5.488017] raid6: sse2x1   gen()  2489 MB/s
[    5.556022] raid6: sse2x1   xor()  1986 MB/s
[    5.624028] raid6: sse2x2   gen()  3214 MB/s
[    5.692022] raid6: sse2x2   xor()  2146 MB/s
[    5.692024] raid6: using algorithm sse2x2 gen() 3214 MB/s
[    5.692027] raid6: .... xor() 2146 MB/s, rmw enabled
[    5.692029] raid6: using intx1 recovery algorithm
[    5.697699] xor: measuring software checksum speed
[    5.736013]    pIII_sse  :  4953.000 MB/sec
[    5.776013]    prefetch64-sse:  4957.000 MB/sec
[    5.776016] xor: using function: prefetch64-sse (4957.000 MB/sec)
[    5.839608] Btrfs loaded
[    6.467914] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    8.098081] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.098313] systemd[1]: Detected architecture x86.
[    8.110964] systemd[1]: Set hostname to <asus-f3u>.
[   10.950644] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.950844] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   10.950875] systemd[1]: Reached target User and Group Name Lookups.
[   10.950942] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.951135] systemd[1]: Created slice System Slice.
[   10.951306] systemd[1]: Listening on Journal Audit Socket.
[   10.951383] systemd[1]: Listening on udev Control Socket.
[   10.951470] systemd[1]: Listening on Journal Socket.
[   10.964150] systemd[1]: Mounting Huge Pages File System...
[   10.965215] systemd[1]: Starting Uncomplicated firewall...
[   10.966381] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   10.966553] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.966663] systemd[1]: Listening on Syslog Socket.
[   10.966728] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.140359] systemd[1]: Starting Load Kernel Modules...
[   11.140412] systemd[1]: Reached target Remote File Systems (Pre).
[   11.140471] systemd[1]: Reached target Remote File Systems.
[   11.140681] systemd[1]: Created slice User and Session Slice.
[   11.140722] systemd[1]: Reached target Slices.
[   11.140841] systemd[1]: Listening on LVM2 poll daemon socket.
[   11.140930] systemd[1]: Listening on udev Kernel Socket.
[   11.140979] systemd[1]: Reached target Swap.
[   11.141038] systemd[1]: Listening on LVM2 metadata daemon socket.
[   11.142070] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   11.142505] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   11.304185] systemd[1]: Mounting Debug File System...
[   11.305422] systemd[1]: Starting Journal Service...
[   11.305495] systemd[1]: Reached target Encrypted Volumes.
[   11.306518] systemd[1]: Mounting POSIX Message Queue File System...
[   11.307739] systemd[1]: Started Read required files in advance.
[   11.313916] systemd[1]: Starting Set console keymap...
[   11.320136] systemd[1]: Started Uncomplicated firewall.
[   11.320638] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   11.404319] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.863299] systemd[1]: Mounted Huge Pages File System.
[   11.863477] systemd[1]: Mounted POSIX Message Queue File System.
[   11.863577] systemd[1]: Mounted Debug File System.
[   12.536369] systemd[1]: Started LVM2 metadata daemon.
[   12.541682] lp: driver loaded but no devices found
[   12.587066] ppdev: user-space parallel port driver
[   12.714383] systemd[1]: Started Journal Service.
[   18.197215] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   18.997713] systemd-journald[303]: Received request to flush runtime journal from PID 1
[   19.813966] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.021765] asus_laptop: Asus Laptop Support version 0.42
[   20.021960] asus_laptop:   F3U model detected
[   20.023721] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
[   20.882024] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   20.882261] ACPI Warning: SystemIO range 0x0000000000000B10-0x0000000000000B18 conflicts with OpRegion 0x0000000000000B10-0x0000000000000B1F (\SMB0) (20150930/utaddress-254)
[   20.882271] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.197096] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   21.250336] EDAC MC: Ver: 3.0.0
[   21.300838] MCE: In-kernel MCE decoding enabled.
[   21.436218] AMD64 EDAC driver v3.4.0
[   21.436276] EDAC amd64: DRAM ECC disabled.
[   21.436283] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   21.484553] r592: driver successfully loaded
[   22.493604] ath5k 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[   22.493816] ath5k 0000:06:00.0: registered as 'phy0'
[   23.132773] ath: EEPROM regdomain: 0x60
[   23.132779] ath: EEPROM indicates we should expect a direct regpair map
[   23.132783] ath: Country alpha2 being used: 00
[   23.132786] ath: Regpair used: 0x60
[   23.232935] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.233420] ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa0, PHY: 0x61)
[   23.282557] kvm: Nested Virtualization enabled
[   23.285744] ath5k 0000:06:00.0 wlp6s0: renamed from wlan0
[   23.307003] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC660-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   23.307013] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.307017] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   23.307021] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   23.307024] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   23.307027] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   23.307031] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   23.307035] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   23.390610] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[   23.390751] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[   24.076930] media: Linux media interface: v0.10
[   24.135773] Linux video capture interface: v2.00
[   24.605965] stkwebcam: Syntek USB2.0 Camera is now controlling device video0
[   24.606009] usbcore: registered new interface driver stkwebcam
[   25.408394] cfg80211: World regulatory domain updated:
[   25.408402] cfg80211:  DFS Master region: unset
[   25.408404] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   25.408409] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   25.408413] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   25.408416] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   25.408419] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   25.408423] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   25.408426] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   25.408429] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   25.408432] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   28.342738] cgroup: new mount options do not match the existing superblock, will be ignored
[   38.292094] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   38.324116] r8169 0000:05:00.0 enp5s0: link down
[   38.324262] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   38.424326] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   38.434064] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   40.209612] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[   42.138148] wlp6s0: authenticate with 14:0c:76:77:85:f3
[   42.147196] wlp6s0: send auth to 14:0c:76:77:85:f3 (try 1/3)
[   42.149049] wlp6s0: authenticated
[   42.152286] wlp6s0: associate with 14:0c:76:77:85:f3 (try 1/3)
[   42.156595] wlp6s0: RX AssocResp from 14:0c:76:77:85:f3 (capab=0x411 status=0 aid=1)
[   42.156770] wlp6s0: associated
[   42.156910] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
bruno@asus-f3u ~ $ 
Bon ben si tu vois quelque chose qui m***e là dedans car moi je n'y connais rien. C'était finalement pas le pare-feu.
Jumbo67.
laptop: Asus Notebook F3U/Dual Vista Familial Prémium 32b/LM 19.1 xfce 32b/ Processeur AMD Turion 64X2 Mobile Technology TL-56 1,80GHz/ Ram 2Go/DD 160Go.

Avatar du membre
arghlub
modérateur
Messages : 8017
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Plantage au démarrage de Linux

Message par arghlub »

Salut,

Par rapport à l'erreur dans ton «sudo dmesg -l err» :

Code : Tout sélectionner

[    2.984044] ata1: softreset failed (device not ready)
Vas peut-être voir par là : https://forum.ubuntu-fr.org/viewtopic.php?id=1143061" onclick="window.open(this.href);return false; (il y est préconisé de vérifier les cablages en premier lieu ou d'ajouter des options au grub).

Mais ton disque est peut-être aussi en fin de vie :? (je te conseillerais donc de sauvegarder au plus vite tes documents sur un autre disque dur à partir d'une session-live).
;)
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 10 | MXlinux 19 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 | XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | LMint 19.3 | XFCE
Portable2 Lenovo G50-80 (boosté RAM+SSD) | CPU Intel I3-4005U | RAM 8Go | tripleBoot : LMint 18.3 | MXlinux 19 | LMint 19.3 | XFCE
─────( pour une informatique libre ! -membre de l' April.org )────────────────

jumbo67
Messages : 156
Enregistré le : mer. 29 mars 2017 15:49

Re: Plantage au démarrage de Linux

Message par jumbo67 »

Bonjour arghlub.

Merci beaucoup pour la réponse et pour le lien. Effectivement mon DD n'est pas de la 1ére jeunesse. Je ne l'ai jamais changé. Et mon pc portable a 11ans.
Je vais tester l'astuce préconisée dans le lien et on verra bien.
Merci d'avoir pris du temps pour m'aider.
Bonne journée.
Jumbo67.
laptop: Asus Notebook F3U/Dual Vista Familial Prémium 32b/LM 19.1 xfce 32b/ Processeur AMD Turion 64X2 Mobile Technology TL-56 1,80GHz/ Ram 2Go/DD 160Go.

mpedro
Messages : 1517
Enregistré le : dim. 8 nov. 2015 22:13
Contact :

Re: Plantage au démarrage de Linux

Message par mpedro »

juste en aparté tu peux garder un DD défectueux plusieurs années tout dépend bien sûr et c'est repousser pour mieux sauter un jour mais des secteurs défectueux c'est assez courant et souvent la commande fsck en exemple règle bien des choses e2fsck /dev/ton disque
Stretch 32bits cinnamon/Fedora25/Sarah
Compaq 8510p/MSI GE70/Raspberry Pi2

Avatar du membre
Gerinald
Messages : 907
Enregistré le : dim. 22 janv. 2017 10:40
Localisation : Manage (Belgique)

Re: Plantage au démarrage de Linux

Message par Gerinald »

Salux,

Je viens un peu ajouter mon grain de sel, en ce qui concerne un DD qui pourrai être défectueux :)

J'ai moi même un DD défectueux, dans le sens ou il manque des blocs (défectueux) ... tant que la tête n'accroche pas, rien à craindre .. par contre, dès que on entend des cliquetis ... alerte ... on sauve tout et on cherche à changer son DD ...

Maintenant, il serai judicieux de checké la santé de ton DD, et ça, il faut le faire en bootant sur une distro, jamais le faire à partir de sa propre distro en dur ...

J'utilise System rescue Toolkit, certes ancien, mais c'est un vrai couteau suisse, super efficace ;)

Et là, je te laisse le soin de chercher dans le man de fsck ... mais rien de compliqué ... de plus, tu pourra isolé les blocs défectueux ;)
Distro : LM-19,1 - Cinnamon 4.0.8 - Kernel 4.18.5-041805-generic
PC : AMD Athlon II X2 250 duo, CG : NVIDIA GT218 [GeForce 210] sur pilote "Nouveau", 4 Go de mémoire vive

Avatar du membre
arghlub
modérateur
Messages : 8017
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence
Contact :

Re: Plantage au démarrage de Linux

Message par arghlub »

Pour ton DD, vas jeter un œil à ce tuto de l'ami mpat : FFLM : Tester et réparer son disque dur.
Tour1 (custom)CM MSI Z270 M3 | CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : Debian 10 | MXlinux 19 | LMint 19.3 | XFCE
Tour2 (custom)CM Gigabyte | CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD 12.1 | XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | LMint 19.3 | XFCE
Portable2 Lenovo G50-80 (boosté RAM+SSD) | CPU Intel I3-4005U | RAM 8Go | tripleBoot : LMint 18.3 | MXlinux 19 | LMint 19.3 | XFCE
─────( pour une informatique libre ! -membre de l' April.org )────────────────

Répondre