pas de connection wifi

[Yvon58]

Bonjour.

Je viens de franchir le pas et d'installer Mint en double Boot sur mon ordi principal. Tout semble fonctionner sauf que, sous windows comme sous Mint, pas de connexion wifi. Là je suis vraiment dans le caca, et je ne sais même pas où chercher !

Yvon

Je précise que quand j'ai essayé en version "live" tout fonctionnait parfaitement

[karami]

Salut,

pour commencer, tu as déjà pas mal de pistes à explorer par ici: A lire en cas de problèmes liés à la wifi

[Yvon58]

Voila ce que j'ai trouvé:

Code : Tout sélectionner

 yvon@HP-All-in-One-Mint:~$ inxi -nz
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
  driver: r8169 
  IF: enp2s0 state: down mac: <filter> 
yvon@HP-All-in-One-Mint:~$ rfkill list
yvon@HP-All-in-One-Mint:~$ rfkill list
yvon@HP-All-in-One-Mint:~$ sudo Ishw -C network | grep -v "numéro de série"
[sudo] password for yvon:          
sudo: Ishw: command not found
yvon@HP-All-in-One-Mint:~$ sudo 1shw -C network | grep -v "numéro de série"
sudo: 1shw: command not found
yvon@HP-All-in-One-Mint:~$ sudo dmesg
[    0.000000] Linux version 5.0.0-32-generic (buildd@lgw01-amd64-015) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #34~18.04.2-Ubuntu SMP Thu Oct 10 10:36:02 UTC 2019 (Ubuntu 5.0.0-32.34~18.04.2-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-32-generic root=UUID=51646de9-e2c1-4a0e-b8a4-087d4f1d55dd ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000072625fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000072626000-0x0000000072626fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000072627000-0x0000000072627fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000072628000-0x0000000077b0afff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077b0b000-0x0000000077e35fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077e36000-0x0000000077e79fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077e7a000-0x0000000078691fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078692000-0x0000000079ea6fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079ea7000-0x0000000079efdfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079efe000-0x0000000079efefff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079eff000-0x000000007e7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002807fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x77e43000  ACPI=0x77e43000  SMBIOS=0x79e07000  SMBIOS 3.0=0x79e06000  MPS=0xfca30  ESRT=0x76729f18 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: HP HP All-in-One 24-e0XX/82DD, BIOS F.42 01/31/2019
[    0.000000] tsc: Detected 2400.000 MHz processor
[    0.002009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002010] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002018] last_pfn = 0x280800 max_arch_pfn = 0x400000000
[    0.002022] MTRR default type: write-back
[    0.002023] MTRR fixed ranges enabled:
[    0.002024]   00000-9FFFF write-back
[    0.002025]   A0000-BFFFF uncachable
[    0.002026]   C0000-FFFFF write-protect
[    0.002026] MTRR variable ranges enabled:
[    0.002028]   0 base 0080000000 mask 7F80000000 uncachable
[    0.002029]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.002029]   2 disabled
[    0.002030]   3 disabled
[    0.002030]   4 disabled
[    0.002031]   5 disabled
[    0.002031]   6 disabled
[    0.002031]   7 disabled
[    0.002032]   8 disabled
[    0.002032]   9 disabled
[    0.003133] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003370] last_pfn = 0x79eff max_arch_pfn = 0x400000000
[    0.011626] found SMP MP-table at [mem 0x000fcc40-0x000fcc4f]
[    0.011640] esrt: Reserving ESRT space from 0x0000000076729f18 to 0x0000000076729f50.
[    0.011651] check: Scanning 1 areas for low memory corruption
[    0.011656] Using GB pages for direct mapping
[    0.011658] BRK [0x229801000, 0x229801fff] PGTABLE
[    0.011659] BRK [0x229802000, 0x229802fff] PGTABLE
[    0.011660] BRK [0x229803000, 0x229803fff] PGTABLE
[    0.011686] BRK [0x229804000, 0x229804fff] PGTABLE
[    0.011688] BRK [0x229805000, 0x229805fff] PGTABLE
[    0.011799] BRK [0x229806000, 0x229806fff] PGTABLE
[    0.011818] BRK [0x229807000, 0x229807fff] PGTABLE
[    0.011862] BRK [0x229808000, 0x229808fff] PGTABLE
[    0.011891] BRK [0x229809000, 0x229809fff] PGTABLE
[    0.011940] RAMDISK: [mem 0x30629000-0x3430bfff]
[    0.011945] ACPI: Early table checksum verification disabled
[    0.011948] ACPI: RSDP 0x0000000077E43000 000024 (v02 HPQOEM)
[    0.011951] ACPI: XSDT 0x0000000077E430B0 0000DC (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.011957] ACPI: FACP 0x0000000077E6FD98 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.011961] ACPI: DSDT 0x0000000077E43218 02CB7C (v02 HPQOEM SLIC-CPC 01072009 INTL 20160422)
[    0.011964] ACPI: FACS 0x000000007865FC40 000040
[    0.011967] ACPI: APIC 0x0000000077E6FEB0 000084 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.011969] ACPI: FPDT 0x0000000077E6FF38 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.011972] ACPI: MCFG 0x0000000077E6FF80 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
[    0.011974] ACPI: FIDT 0x0000000077E6FFC0 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.011976] ACPI: MSDM 0x0000000077E70060 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.011979] ACPI: SSDT 0x0000000077E700B8 003154 (v02 HPQOEM SLIC-CPC 00003000 INTL 20160422)
[    0.011981] ACPI: HPET 0x0000000077E73210 000038 (v01 HPQOEM SLIC-CPC 00000001 MSFT 0000005F)
[    0.011984] ACPI: SSDT 0x0000000077E73248 0006B0 (v02 HPQOEM SLIC-CPC 00000000 INTL 20160422)
[    0.011986] ACPI: UEFI 0x0000000077E738F8 000042 (v01 HPQOEM SLIC-CPC 00000002      01000013)
[    0.011989] ACPI: SSDT 0x0000000077E73940 000EDE (v02 HPQOEM SLIC-CPC 00003000 INTL 20160422)
[    0.011992] ACPI: LPIT 0x0000000077E74820 000094 (v01 HPQOEM SLIC-CPC 00000000 MSFT 0000005F)
[    0.011994] ACPI: WSMT 0x0000000077E748B8 000028 (v01 HPQOEM SLIC-CPC 00000000 MSFT 0000005F)
[    0.011996] ACPI: SSDT 0x0000000077E748E0 002F96 (v02 HPQOEM SLIC-CPC 00001000 INTL 20160422)
[    0.011999] ACPI: DBGP 0x0000000077E77878 000034 (v01 HPQOEM SLIC-CPC 00000002 MSFT 0000005F)
[    0.012001] ACPI: DBG2 0x0000000077E778B0 000054 (v00 HPQOEM SLIC-CPC 00000002 MSFT 0000005F)
[    0.012003] ACPI: BGRT 0x0000000077E77908 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.012006] ACPI: SSDT 0x0000000077E77940 000259 (v02 HPQOEM SLIC-CPC 00001000 INTL 20160422)
[    0.012008] ACPI: SSDT 0x0000000077E77BA0 000712 (v02 HPQOEM SLIC-CPC 00001000 INTL 20160422)
[    0.012011] ACPI: DMAR 0x0000000077E782B8 0000A8 (v01 HPQOEM SLIC-CPC 00000001 INTL 00000001)
[    0.012013] ACPI: DBGP 0x0000000077E78360 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.012016] ACPI: TPM2 0x0000000077E78398 000034 (v03 HPQOEM SLIC-CPC 00000001 AMI  00000000)
[    0.012018] ACPI: SSDT 0x0000000077E783D0 00171A (v01 HPQOEM SLIC-CPC 00001000 INTL 20160422)
[    0.012025] ACPI: Local APIC address 0xfee00000
[    0.012201] No NUMA configuration found
[    0.012202] Faking a node at [mem 0x0000000000000000-0x00000002807fffff]
[    0.012211] NODE_DATA(0) allocated [mem 0x2807d5000-0x2807fffff]
[    0.012396] Zone ranges:
[    0.012397]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012398]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012399]   Normal   [mem 0x0000000100000000-0x00000002807fffff]
[    0.012400]   Device   empty
[    0.012401] Movable zone start for each node
[    0.012404] Early memory node ranges
[    0.012405]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.012406]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.012407]   node   0: [mem 0x0000000000100000-0x0000000072625fff]
[    0.012407]   node   0: [mem 0x0000000072628000-0x0000000077b0afff]
[    0.012408]   node   0: [mem 0x0000000079efe000-0x0000000079efefff]
[    0.012408]   node   0: [mem 0x0000000100000000-0x00000002807fffff]
[    0.012934] Zeroed struct page in unavailable ranges: 34137 pages
[    0.012936] Initmem setup node 0 [mem 0x0000000000001000-0x00000002807fffff]
[    0.012937] On node 0 totalpages: 2065063
[    0.012938]   DMA zone: 64 pages used for memmap
[    0.012939]   DMA zone: 27 pages reserved
[    0.012939]   DMA zone: 3997 pages, LIFO batch:0
[    0.013052]   DMA32 zone: 7597 pages used for memmap
[    0.013052]   DMA32 zone: 486154 pages, LIFO batch:63
[    0.026899]   Normal zone: 24608 pages used for memmap
[    0.026900]   Normal zone: 1574912 pages, LIFO batch:63
[    0.063335] Reserving Intel graphics memory at [mem 0x7c800000-0x7e7fffff]
[    0.063514] ACPI: PM-Timer IO Port: 0x1808
[    0.063515] ACPI: Local APIC address 0xfee00000
[    0.063522] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.063522] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.063523] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.063524] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.063551] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.063552] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.063554] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.063555] ACPI: IRQ0 used by override.
[    0.063556] ACPI: IRQ9 used by override.
[    0.063558] Using ACPI (MADT) for SMP configuration information
[    0.063559] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.063568] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.063586] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.063587] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.063589] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.063590] PM: Registered nosave memory: [mem 0x72626000-0x72626fff]
[    0.063591] PM: Registered nosave memory: [mem 0x72627000-0x72627fff]
[    0.063592] PM: Registered nosave memory: [mem 0x77b0b000-0x77e35fff]
[    0.063592] PM: Registered nosave memory: [mem 0x77e36000-0x77e79fff]
[    0.063593] PM: Registered nosave memory: [mem 0x77e7a000-0x78691fff]
[    0.063593] PM: Registered nosave memory: [mem 0x78692000-0x79ea6fff]
[    0.063594] PM: Registered nosave memory: [mem 0x79ea7000-0x79efdfff]
[    0.063595] PM: Registered nosave memory: [mem 0x79eff000-0x7e7fffff]
[    0.063596] PM: Registered nosave memory: [mem 0x7e800000-0xdfffffff]
[    0.063596] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.063597] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.063597] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.063598] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.063598] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.063599] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.063599] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.063600] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.063600] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.063602] [mem 0x7e800000-0xdfffffff] available for PCI devices
[    0.063603] Booting paravirtualized kernel on bare hardware
[    0.063607] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.063617] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.063622] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.063887] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u524288
[    0.063893] pcpu-alloc: s155648 r8192 d28672 u524288 alloc=1*2097152
[    0.063894] pcpu-alloc: [0] 0 1 2 3 
[    0.063917] Built 1 zonelists, mobility grouping on.  Total pages: 2032767
[    0.063917] Policy zone: Normal
[    0.063919] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-32-generic root=UUID=51646de9-e2c1-4a0e-b8a4-087d4f1d55dd ro quiet splash vt.handoff=1
[    0.070984] Calgary: detecting Calgary via BIOS EBDA area
[    0.070986] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.104194] Memory: 7859168K/8260252K available (14339K kernel code, 2335K rwdata, 4408K rodata, 2588K init, 5192K bss, 401084K reserved, 0K cma-reserved)
[    0.104318] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.104324] Kernel/User page tables isolation: enabled
[    0.104342] ftrace: allocating 41617 entries in 163 pages
[    0.122918] rcu: Hierarchical RCU implementation.
[    0.122919] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.122920] 	Tasks RCU enabled.
[    0.122921] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.122922] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.125602] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.125896] vt handoff: transparent VT on vt#1
[    0.125900] Console: colour dummy device 80x25
[    0.125905] printk: console [tty0] enabled
[    0.125921] ACPI: Core revision 20181213
[    0.126299] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.126330] hpet clockevent registered
[    0.126367] APIC: Switch to symmetric I/O mode setup
[    0.126370] DMAR: Host address width 39
[    0.126371] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.126376] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.126377] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.126381] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.126382] DMAR: RMRR base: 0x00000077dc7000 end: 0x00000077de6fff
[    0.126383] DMAR: RMRR base: 0x0000007c000000 end: 0x0000007e7fffff
[    0.126385] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.126385] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.126386] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.128301] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.128302] x2apic enabled
[    0.128315] Switched APIC routing to cluster x2apic.
[    0.132501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.150339] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    0.150353] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600000)
[    0.150355] pid_max: default: 32768 minimum: 301
[    0.154208] LSM: Security Framework initializing
[    0.154218] Yama: becoming mindful.
[    0.154235] AppArmor: AppArmor initialized
[    0.156222] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.157176] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.157213] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.157264] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.157482] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.157482] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.157499] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.157515] process: using mwait in idle threads
[    0.157517] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.157518] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.157519] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.157520] Spectre V2 : Mitigation: Full generic retpoline
[    0.157521] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.157521] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.157527] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.157527] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.157528] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.157552] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.157811] Freeing SMP alternatives memory: 36K
[    0.160438] TSC deadline timer enabled
[    0.160442] smpboot: CPU0: Intel(R) Core(TM) i3-7100U CPU @ 2.40GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.160527] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.160534] ... version:                4
[    0.160534] ... bit width:              48
[    0.160535] ... generic registers:      4
[    0.160536] ... value mask:             0000ffffffffffff
[    0.160536] ... max period:             00007fffffffffff
[    0.160537] ... fixed-purpose events:   3
[    0.160537] ... event mask:             000000070000000f
[    0.160576] rcu: Hierarchical SRCU implementation.
[    0.161312] random: crng done (trusting CPU's manufacturer)
[    0.161599] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.161645] smp: Bringing up secondary CPUs ...
[    0.161720] x86: Booting SMP configuration:
[    0.161721] .... node  #0, CPUs:      #1 #2
[    0.162141] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.162141]  #3
[    0.162141] smp: Brought up 1 node, 4 CPUs
[    0.162141] smpboot: Max logical packages: 1
[    0.162141] smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
[    0.162629] devtmpfs: initialized
[    0.162629] x86/mm: Memory block size: 128MB
[    0.162986] PM: Registering ACPI NVS region [mem 0x72626000-0x72626fff] (4096 bytes)
[    0.162986] PM: Registering ACPI NVS region [mem 0x77e7a000-0x78691fff] (8486912 bytes)
[    0.162986] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.162986] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.162986] pinctrl core: initialized pinctrl subsystem
[    0.162986] RTC time: 15:32:08, date: 2020-02-14
[    0.162986] NET: Registered protocol family 16
[    0.162986] audit: initializing netlink subsys (disabled)
[    0.162986] audit: type=2000 audit(1581694328.040:1): state=initialized audit_enabled=0 res=1
[    0.162986] EISA bus registered
[    0.162986] cpuidle: using governor ladder
[    0.162986] cpuidle: using governor menu
[    0.162986] ACPI: bus type PCI registered
[    0.162986] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.162986] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.162986] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.162986] PCI: Using configuration type 1 for base access
[    0.163573] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.163573] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.163573] ACPI: Added _OSI(Module Device)
[    0.163573] ACPI: Added _OSI(Processor Device)
[    0.163573] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163573] ACPI: Added _OSI(Processor Aggregator Device)
[    0.163573] ACPI: Added _OSI(Linux-Dell-Video)
[    0.163573] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.163573] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.213277] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.218002] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.223299] ACPI: Dynamic OEM Table Load:
[    0.223305] ACPI: SSDT 0xFFFF9EF0B6AA9000 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.223940] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.225658] ACPI: Dynamic OEM Table Load:
[    0.225662] ACPI: SSDT 0xFFFF9EF0B64EA000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.226603] ACPI: Dynamic OEM Table Load:
[    0.226608] ACPI: SSDT 0xFFFF9EF0B7C16800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.227551] ACPI: Dynamic OEM Table Load:
[    0.227555] ACPI: SSDT 0xFFFF9EF0B65F5600 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.230152] ACPI: EC: EC started
[    0.230152] ACPI: EC: interrupt blocked
[    0.230181] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.230182] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.230183] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.230184] ACPI: Interpreter enabled
[    0.230228] ACPI: (supports S0 S3 S4 S5)
[    0.230230] ACPI: Using IOAPIC for interrupt routing
[    0.230271] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.231530] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.236125] ACPI: Power Resource [WRST] (on)
[    0.236596] ACPI: Power Resource [WRST] (on)
[    0.237036] ACPI: Power Resource [WRST] (on)
[    0.237473] ACPI: Power Resource [WRST] (on)
[    0.237910] ACPI: Power Resource [WRST] (on)
[    0.237970] ACPI: Power Resource [PC09] (on)
[    0.239194] ACPI: Power Resource [WRST] (on)
[    0.239636] ACPI: Power Resource [WRST] (on)
[    0.240079] ACPI: Power Resource [WRST] (on)
[    0.240520] ACPI: Power Resource [WRST] (on)
[    0.240958] ACPI: Power Resource [WRST] (on)
[    0.241393] ACPI: Power Resource [WRST] (on)
[    0.241830] ACPI: Power Resource [WRST] (on)
[    0.242266] ACPI: Power Resource [WRST] (on)
[    0.242708] ACPI: Power Resource [WRST] (on)
[    0.243145] ACPI: Power Resource [WRST] (on)
[    0.243581] ACPI: Power Resource [WRST] (on)
[    0.245251] ACPI: Power Resource [WRST] (on)
[    0.245697] ACPI: Power Resource [WRST] (on)
[    0.246133] ACPI: Power Resource [WRST] (on)
[    0.262272] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.262278] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.264284] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.265300] PCI host bridge to bus 0000:00
[    0.265302] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.265304] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.265305] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.265306] pci_bus 0000:00: root bus resource [mem 0x7e800000-0xdfffffff window]
[    0.265307] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.265308] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.265315] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.265740] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.265752] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.265758] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.265763] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.265780] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.266007] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.266032] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
[    0.266110] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.266410] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.266439] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
[    0.266521] pci 0000:00:16.0: PME# supported from D3hot
[    0.266727] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.266747] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
[    0.266755] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
[    0.266763] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.266771] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.266779] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.266787] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
[    0.266834] pci 0000:00:17.0: PME# supported from D3hot
[    0.267033] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.267117] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.267368] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.267452] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.267705] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.267994] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.268009] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
[    0.268227] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.268250] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
[    0.268272] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
[    0.268317] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.268577] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.268637] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
[    0.268706] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.269012] pci 0000:01:00.0: [10de:134f] type 00 class 0x030200
[    0.269038] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.269051] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.269064] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.269073] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.269081] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.269101] pci 0000:01:00.0: Enabling HDA controller
[    0.269314] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.269317] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.269320] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.269324] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.269400] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.269429] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.269452] pci 0000:02:00.0: reg 0x18: [mem 0xdf104000-0xdf104fff 64bit]
[    0.269466] pci 0000:02:00.0: reg 0x20: [mem 0xdf100000-0xdf103fff 64bit]
[    0.269576] pci 0000:02:00.0: supports D1 D2
[    0.269577] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269781] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.269784] pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
[    0.269786] pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.272229] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.272298] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.272365] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.272431] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.272498] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.272566] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.272633] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.272699] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.273169] ACPI: EC: interrupt unblocked
[    0.273169] ACPI: EC: event unblocked
[    0.273171] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.273171] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.273171] SCSI subsystem initialized
[    0.273171] libata version 3.00 loaded.
[    0.273171] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.273171] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.273171] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.273171] vgaarb: loaded
[    0.273171] ACPI: bus type USB registered
[    0.273171] usbcore: registered new interface driver usbfs
[    0.273171] usbcore: registered new interface driver hub
[    0.273171] usbcore: registered new device driver usb
[    0.273171] pps_core: LinuxPPS API ver. 1 registered
[    0.273171] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.273171] PTP clock support registered
[    0.273171] EDAC MC: Ver: 3.0.0
[    0.273171] Registered efivars operations
[    0.318606] PCI: Using ACPI for IRQ routing
[    0.344083] PCI: pci_cache_line_size set to 64 bytes
[    0.344128] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.344130] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.344130] e820: reserve RAM buffer [mem 0x72626000-0x73ffffff]
[    0.344131] e820: reserve RAM buffer [mem 0x77b0b000-0x77ffffff]
[    0.344132] e820: reserve RAM buffer [mem 0x79eff000-0x7bffffff]
[    0.344133] e820: reserve RAM buffer [mem 0x280800000-0x283ffffff]
[    0.346343] NetLabel: Initializing
[    0.346343] NetLabel:  domain hash size = 128
[    0.346343] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.346343] NetLabel:  unlabeled traffic allowed by default
[    0.346423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.346426] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.350356] clocksource: Switched to clocksource tsc-early
[    0.360965] VFS: Disk quotas dquot_6.6.0
[    0.360980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.361083] AppArmor: AppArmor Filesystem Enabled
[    0.361111] pnp: PnP ACPI init
[    0.361437] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.361438] system 00:00: [io  0xffff] has been reserved
[    0.361439] system 00:00: [io  0xffff] has been reserved
[    0.361441] system 00:00: [io  0xffff] has been reserved
[    0.361442] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.361443] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.361447] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.361560] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.361599] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.361602] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.361923] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.361924] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.361925] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.361926] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.361927] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.361929] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.361930] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.361931] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.361932] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.361933] system 00:03: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.361936] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.361983] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.361984] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.361985] system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.361986] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.361987] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.361988] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.361990] system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.361992] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.362356] system 00:05: [io  0xff00-0xfffe] has been reserved
[    0.362359] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363861] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.363862] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.363863] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.363864] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.363865] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.363868] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364963] pnp: PnP ACPI: found 7 devices
[    0.370593] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.370612] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.370614] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.370618] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.370620] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.370625] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.370627] pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
[    0.370630] pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.370637] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.370638] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.370639] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.370640] pci_bus 0000:00: resource 7 [mem 0x7e800000-0xdfffffff window]
[    0.370641] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.370642] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.370643] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.370644] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.370645] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.370646] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.370825] NET: Registered protocol family 2
[    0.370996] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.371025] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.371147] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.371386] TCP: Hash tables configured (established 65536 bind 65536)
[    0.371422] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.371452] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.371528] NET: Registered protocol family 1
[    0.371532] NET: Registered protocol family 44
[    0.371542] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.371862] PCI: CLS 64 bytes, default 64
[    0.371912] Unpacking initramfs...
[    1.293443] Freeing initrd memory: 62348K
[    1.314393] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.314401] software IO TLB: mapped [mem 0x6d2ea000-0x712ea000] (64MB)
[    1.314653] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[    1.314664] clocksource: Switched to clocksource tsc
[    1.314720] check: Scanning for low memory corruption every 60 seconds
[    1.316216] Initialise system trusted keyrings
[    1.316222] Key type blacklist registered
[    1.316248] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.317461] zbud: loaded
[    1.317858] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.318030] fuse init (API version 7.28)
[    1.347780] Key type asymmetric registered
[    1.347781] Asymmetric key parser 'x509' registered
[    1.347794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.347830] io scheduler mq-deadline registered
[    1.348204] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    1.348415] pcieport 0000:00:1d.0: Signaling PME with IRQ 123
[    1.348472] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.348526] efifb: probing for efifb
[    1.348539] efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
[    1.348540] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.348540] efifb: scrolling: redraw
[    1.348541] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.348622] Console: switching to colour frame buffer device 128x48
[    1.348635] fb0: EFI VGA frame buffer device
[    1.348641] intel_idle: MWAIT substates: 0x11142120
[    1.348642] intel_idle: v0.4.1 model 0x8E
[    1.348845] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.349023] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.349031] ACPI: Sleep Button [SLPB]
[    1.349056] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.349062] ACPI: Power Button [PWRB]
[    1.349100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.349110] ACPI: Power Button [PWRF]
[    1.351986] thermal LNXTHERM:00: registered as thermal_zone0
[    1.351988] ACPI: Thermal Zone [HPTZ] (52 C)
[    1.352212] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.353724] Linux agpgart interface v0.103
[    1.372860] loop: module loaded
[    1.373052] libphy: Fixed MDIO Bus: probed
[    1.373053] tun: Universal TUN/TAP device driver, 1.6
[    1.373078] PPP generic driver version 2.4.2
[    1.373110] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.373111] ehci-pci: EHCI PCI platform driver
[    1.373121] ehci-platform: EHCI generic platform driver
[    1.373130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.373131] ohci-pci: OHCI PCI platform driver
[    1.373137] ohci-platform: OHCI generic platform driver
[    1.373142] uhci_hcd: USB Universal Host Controller Interface driver
[    1.373346] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.373351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.374426] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.374430] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.374602] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.374603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.374604] usb usb1: Product: xHCI Host Controller
[    1.374605] usb usb1: Manufacturer: Linux 5.0.0-32-generic xhci-hcd
[    1.374605] usb usb1: SerialNumber: 0000:00:14.0
[    1.374693] hub 1-0:1.0: USB hub found
[    1.374708] hub 1-0:1.0: 12 ports detected
[    1.375954] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.375957] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.375959] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.375988] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    1.375989] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.375990] usb usb2: Product: xHCI Host Controller
[    1.375990] usb usb2: Manufacturer: Linux 5.0.0-32-generic xhci-hcd
[    1.375991] usb usb2: SerialNumber: 0000:00:14.0
[    1.376066] hub 2-0:1.0: USB hub found
[    1.376076] hub 2-0:1.0: 6 ports detected
[    1.376472] usb: port power management may be unreliable
[    1.376939] i8042: PNP: No PS/2 controller found.
[    1.376940] i8042: Probing ports directly.
[    1.380016] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.380019] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.380113] mousedev: PS/2 mouse device common for all mice
[    1.380238] rtc_cmos 00:01: RTC can wake from S4
[    1.380689] rtc_cmos 00:01: registered as rtc0
[    1.380702] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.380707] i2c /dev entries driver
[    1.380792] device-mapper: uevent: version 1.0.3
[    1.380837] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.380854] platform eisa.0: Probing EISA bus 0
[    1.380855] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.380856] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.380857] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.380858] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.380859] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.380860] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.380860] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.380861] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.380862] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.380863] platform eisa.0: EISA: Detected 0 cards
[    1.380866] intel_pstate: Intel P-state driver initializing
[    1.381139] intel_pstate: HWP enabled
[    1.381169] ledtrig-cpu: registered to indicate activity on CPUs
[    1.381171] EFI Variables Facility v0.08 2004-May-17
[    1.388092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.434008] intel_pmc_core:  initialized
[    1.434200] NET: Registered protocol family 10
[    1.438962] Segment Routing with IPv6
[    1.438983] NET: Registered protocol family 17
[    1.439016] Key type dns_resolver registered
[    1.439356] mce: Using 8 MCE banks
[    1.439367] RAS: Correctable Errors collector initialized.
[    1.439397] microcode: sig=0x806e9, pf=0x80, revision=0x8e
[    1.439535] microcode: Microcode Update Driver: v2.2.
[    1.439546] sched_clock: Marking stable (1443068118, -3536015)->(1445499401, -5967298)
[    1.439710] registered taskstats version 1
[    1.439718] Loading compiled-in X.509 certificates
[    1.441204] Loaded X.509 cert 'Build time autogenerated kernel key: 8248cf0f90a942a6d35391b2654e2baeb494e1df'
[    1.442005] Couldn't get size: 0x800000000000000e
[    1.442007] MODSIGN: Couldn't get UEFI db list
[    1.442435] Couldn't get size: 0x800000000000000e
[    1.442436] MODSIGN: Couldn't get UEFI MokListRT
[    1.443529] zswap: loaded using pool lzo/zbud
[    1.448691] Key type big_key registered
[    1.448695] Key type trusted registered
[    1.450986] Key type encrypted registered
[    1.450990] AppArmor: AppArmor sha1 policy hashing enabled
[    1.453081] ima: Allocated hash algorithm: sha1
[    1.488936] No architecture policies found
[    1.488948] evm: Initialising EVM extended attributes:
[    1.488949] evm: security.selinux
[    1.488949] evm: security.SMACK64
[    1.488950] evm: security.SMACK64EXEC
[    1.488950] evm: security.SMACK64TRANSMUTE
[    1.488950] evm: security.SMACK64MMAP
[    1.488951] evm: security.apparmor
[    1.488951] evm: security.ima
[    1.488952] evm: security.capability
[    1.488952] evm: HMAC attrs: 0x1
[    1.490057]   Magic number: 8:96:538
[    1.490073] tty ttyS18: hash matches
[    1.490237] rtc_cmos 00:01: setting system clock to 2020-02-14T15:32:10 UTC (1581694330)
[    1.491455] Freeing unused decrypted memory: 2040K
[    1.491906] Freeing unused kernel image memory: 2588K
[    1.506910] Write protecting the kernel read-only data: 22528k
[    1.507511] Freeing unused kernel image memory: 2016K
[    1.507918] Freeing unused kernel image memory: 1736K
[    1.517503] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.517504] x86/mm: Checking user space page tables
[    1.526768] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.526770] Run /init as init process
[    1.613727] ahci 0000:00:17.0: version 3.0
[    1.624105] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.624108] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.624551] scsi host0: ahci
[    1.624776] scsi host1: ahci
[    1.624847] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 125
[    1.624850] ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 125
[    1.645368] r8169 0000:02:00.0: enabling device (0100 -> 0103)
[    1.663155] libphy: r8169: probed
[    1.663481] r8169 0000:02:00.0 eth0: RTL8168g/8111g, 80:ce:62:35:6b:c6, XID 509, IRQ 126
[    1.663483] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.663484] VFIO - User Level meta-driver version: 0.3
[    1.664454] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.676293] MXM: GUID detected in BIOS
[    1.676362] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181213/nsarguments-66)
[    1.676486] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181213/nsarguments-66)
[    1.676888] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.676891] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP01.PEGP handle
[    1.676892] nouveau: detected PR support, will not use DSM
[    1.676918] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    1.677060] checking generic (b0000000 300000) vs hw (c0000000 10000000)
[    1.677060] checking generic (b0000000 300000) vs hw (d0000000 2000000)
[    1.677120] nouveau 0000:01:00.0: NVIDIA GM108 (1180f0a2)
[    1.704734] nouveau 0000:01:00.0: bios: version 82.08.59.00.78
[    1.714352] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.789268] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    1.789294] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[    1.806888] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[    1.823616] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    1.823617] fb0: switching to inteldrmfb from EFI VGA
[    1.823632] Console: switching to colour dummy device 80x25
[    1.823763] [drm] Replacing VGA console driver
[    1.824816] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.824817] [drm] Driver supports precise vblank timestamp query.
[    1.825605] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.830361] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.882115] usb 1-2: New USB device found, idVendor=0bda, idProduct=0153, bcdDevice=57.13
[    1.882116] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.882118] usb 1-2: Product: USB2.0-CRW
[    1.882119] usb 1-2: Manufacturer: Generic
[    1.882120] usb 1-2: SerialNumber: 20120926571200000
[    1.886787] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 1
[    1.904173] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.904574] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.904676] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.904716] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input7
[    1.937240] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.940931] ata2.00: ATAPI: hp PLDS DVDRW  DU8AESH, 6HSM, max UDMA/133
[    1.941117] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.941663] ata1.00: ATA-10: WDC WD20EZRZ-60Z5HB0, 81.00A81, max UDMA/100
[    1.941665] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.941875] ata2.00: configured for UDMA/133
[    1.942332] ata1.00: configured for UDMA/100
[    1.946104] fbcon: inteldrmfb (fb0) is primary device
[    1.946154] Console: switching to colour frame buffer device 240x67
[    1.946185] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.952724] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRZ-60Z 0A81 PQ: 0 ANSI: 5
[    1.952988] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.952989] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.953003] sd 0:0:0:0: [sda] Write Protect is off
[    1.953005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.953020] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.953030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.957264] scsi 1:0:0:0: CD-ROM            hp PLDS  DVDRW  DU8AESH   6HSM PQ: 0 ANSI: 5
[    2.010226]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    2.010353] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    2.010621] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.090927] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.090928] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.091111] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.091173] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.185928] usb 1-3: New USB device found, idVendor=0408, idProduct=5221, bcdDevice= 0.02
[    2.185930] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.185931] usb 1-3: Product: HP Integrated Webcam
[    2.185932] usb 1-3: Manufacturer: Generic
[    2.185933] usb 1-3: SerialNumber: 0x0001
[    2.314354] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[    2.464304] usb 1-4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[    2.464306] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.464307] usb 1-4: Product: USB Receiver
[    2.464308] usb 1-4: Manufacturer: Logitech
[    2.469301] hidraw: raw HID events driver (C) Jiri Kosina
[    2.470492] usbcore: registered new interface driver usb-storage
[    2.471913] usbcore: registered new interface driver uas
[    2.473000] ums-realtek 1-2:1.0: USB Mass Storage device detected
[    2.473674] usbcore: registered new interface driver usbhid
[    2.473675] usbhid: USB HID core driver
[    2.475875] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C534.0001/input/input8
[    2.475894] scsi host2: usb-storage 1-2:1.0
[    2.475961] usbcore: registered new interface driver ums-realtek
[    2.534463] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-4/input0
[    2.534671] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input9
[    2.534746] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input10
[    2.594488] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C534.0002/input/input11
[    2.594582] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-4/input1
[    3.088612] vga_switcheroo: enabled
[    3.088721] [TTM] Zone  kernel: Available graphics memory: 4017702 kiB
[    3.088722] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.088723] [TTM] Initializing pool allocator
[    3.088726] [TTM] Initializing DMA pool allocator
[    3.088741] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    3.088742] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.088745] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    3.088745] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.089521] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    3.089703] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    3.214914] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[    3.484733] scsi 2:0:0:0: Direct-Access     Generic- SD/MMC/MS PRO    1.00 PQ: 0 ANSI: 4
[    3.484983] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    3.488653] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.654382] raid6: avx2x4   gen() 22919 MB/s
[    3.702345] raid6: avx2x4   xor() 13625 MB/s
[    3.750380] raid6: avx2x2   gen() 20349 MB/s
[    3.798380] raid6: avx2x2   xor() 12862 MB/s
[    3.846381] raid6: avx2x1   gen() 16838 MB/s
[    3.894380] raid6: avx2x1   xor() 11736 MB/s
[    3.942347] raid6: sse2x4   gen() 12102 MB/s
[    3.990386] raid6: sse2x4   xor()  7338 MB/s
[    4.038385] raid6: sse2x2   gen() 10481 MB/s
[    4.086345] raid6: sse2x2   xor()  7090 MB/s
[    4.134389] raid6: sse2x1   gen()  8475 MB/s
[    4.182352] raid6: sse2x1   xor()  6220 MB/s
[    4.182352] raid6: using algorithm avx2x4 gen() 22919 MB/s
[    4.182353] raid6: .... xor() 13625 MB/s, rmw enabled
[    4.182354] raid6: using avx2x2 recovery algorithm
[    4.185261] xor: automatically using best checksumming function   avx       
[    4.200980] Btrfs loaded, crc32c=crc32c-intel
[    4.509956] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.590093] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.607069] systemd[1]: Detected architecture x86-64.
[    5.610293] systemd[1]: Set hostname to <HP-All-in-One-Mint>.
[    7.179660] systemd[1]: Reached target Remote File Systems.
[    7.179876] systemd[1]: Created slice System Slice.
[    7.179942] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.180036] systemd[1]: Listening on Journal Audit Socket.
[    7.180083] systemd[1]: Listening on Syslog Socket.
[    7.181312] systemd[1]: Listening on Process Core Dump Socket.
[    7.181377] systemd[1]: Listening on udev Control Socket.
[    7.407333] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    7.429081] systemd-journald[416]: Received request to flush runtime journal from PID 1
[    7.582867] lp: driver loaded but no devices found
[    7.620924] ppdev: user-space parallel port driver
[    7.746586] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[    9.555000] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    9.760318] snd_hda_intel 0000:00:1f.3: enabling device (0100 -> 0102)
[    9.760508] snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
[    9.760540] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.927421] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20181213/dsopcode-201)
[    9.927432] No Local Variables are initialized for Method [HWMC]
[    9.927434] Initialized Arguments for Method [HWMC]:  (2 arguments defined for method invocation)
[    9.927435]   Arg0:   0000000075672bb7 <Obj>           Integer 0000000000000002
[    9.927441]   Arg1:   000000007652ef75 <Obj>           Buffer(20) 53 45 43 55 01 00 00 00
[    9.927450] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927463] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927555] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20181213/dsopcode-201)
[    9.927563] No Local Variables are initialized for Method [HWMC]
[    9.927565] Initialized Arguments for Method [HWMC]:  (2 arguments defined for method invocation)
[    9.927565]   Arg0:   0000000075672bb7 <Obj>           Integer 0000000000000002
[    9.927570]   Arg1:   000000007a2a420a <Obj>           Buffer(20) 53 45 43 55 01 00 00 00
[    9.927579] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927589] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927679] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20181213/dsopcode-201)
[    9.927686] No Local Variables are initialized for Method [HWMC]
[    9.927688] Initialized Arguments for Method [HWMC]:  (2 arguments defined for method invocation)
[    9.927689]   Arg0:   0000000075672bb7 <Obj>           Integer 0000000000000002
[    9.927693]   Arg1:   000000007652ef75 <Obj>           Buffer(20) 53 45 43 55 01 00 00 00
[    9.927701] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927711] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927772] input: HP WMI hotkeys as /devices/virtual/input/input14
[    9.927928] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20181213/dsopcode-201)
[    9.927934] No Local Variables are initialized for Method [HWMC]
[    9.927935] Initialized Arguments for Method [HWMC]:  (2 arguments defined for method invocation)
[    9.927935]   Arg0:   0000000075672bb7 <Obj>           Integer 0000000000000002
[    9.927938]   Arg1:   000000007a2a420a <Obj>           Buffer(20) 53 45 43 55 01 00 00 00
[    9.927944] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.927950] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.928003] ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20181213/dsopcode-201)
[    9.928007] No Local Variables are initialized for Method [HWMC]
[    9.928009] Initialized Arguments for Method [HWMC]:  (2 arguments defined for method invocation)
[    9.928009]   Arg0:   0000000075672bb7 <Obj>           Integer 0000000000000003
[    9.928011]   Arg1:   000000007652ef75 <Obj>           Buffer(20) 53 45 43 55 01 00 00 00
[    9.928016] ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.928022] ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20181213/psparse-531)
[    9.972181] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    9.972184] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.972186] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    9.972187] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.972189] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.972191] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    9.972192] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    9.987329] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    9.987331] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    9.987332] RAPL PMU: hw unit of domain package 2^-14 Joules
[    9.987333] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    9.987333] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    9.987334] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   10.061925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   10.062046] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   10.062163] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   10.062280] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[   10.062413] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[   10.062662] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[   10.062779] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[   10.074597] cryptd: max_cpu_qlen set to 1000
[   10.139067] AVX2 version of gcm_enc/dec engaged.
[   10.139069] AES CTR mode by8 optimization enabled
[   10.147430] media: Linux media interface: v0.10
[   10.215802] videodev: Linux video capture interface: v2.00
[   10.280372] kvm: disabled by bios
[   10.322941] kvm: disabled by bios
[   10.371370] kvm: disabled by bios
[   10.417560] uvcvideo: Found UVC 1.00 device HP Integrated Webcam (0408:5221)
[   10.419490] kvm: disabled by bios
[   10.420083] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   10.420085] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[   10.420087] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   10.420155] input: HP Integrated Webcam: HP Integr as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input22
[   10.420225] usbcore: registered new interface driver uvcvideo
[   10.420226] USB Video Class driver (1.1.1)
[   10.841559] intel_rapl: Found RAPL domain package
[   10.841560] intel_rapl: Found RAPL domain core
[   10.841561] intel_rapl: Found RAPL domain uncore
[   10.841562] intel_rapl: Found RAPL domain dram
[   14.466560] audit: type=1400 audit(1581694343.476:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=723 comm="apparmor_parser"
[   14.467032] audit: type=1400 audit(1581694343.476:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=722 comm="apparmor_parser"
[   14.467035] audit: type=1400 audit(1581694343.476:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=722 comm="apparmor_parser"
[   14.467037] audit: type=1400 audit(1581694343.476:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=722 comm="apparmor_parser"
[   14.468228] audit: type=1400 audit(1581694343.476:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=724 comm="apparmor_parser"
[   14.469008] audit: type=1400 audit(1581694343.476:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=720 comm="apparmor_parser"
[   14.469011] audit: type=1400 audit(1581694343.476:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser"
[   14.469013] audit: type=1400 audit(1581694343.476:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=720 comm="apparmor_parser"
[   14.469015] audit: type=1400 audit(1581694343.476:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=720 comm="apparmor_parser"
[   14.469630] audit: type=1400 audit(1581694343.476:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=726 comm="apparmor_parser"
[   17.870703] nouveau 0000:01:00.0: Enabling HDA controller
[   20.158687] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   20.264875] r8169 0000:02:00.0 enp2s0: Link is Down
[   24.833056] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[  116.698581] nouveau 0000:01:00.0: Enabling HDA controller
[  116.813405] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 2659.795777] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 2822.895304] nouveau 0000:01:00.0: Enabling HDA controller
[ 2822.999681] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 3022.594783] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 3022.750947] usb 1-7: New USB device found, idVendor=154b, idProduct=fa0a, bcdDevice=11.00
[ 3022.750949] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3022.750950] usb 1-7: Product: USB 2.0 FD
[ 3022.750951] usb 1-7: Manufacturer: PNY Technologies
[ 3022.750952] usb 1-7: SerialNumber: 2013120117580953191F
[ 3022.752782] usb-storage 1-7:1.0: USB Mass Storage device detected
[ 3022.752901] scsi host3: usb-storage 1-7:1.0
[ 3023.777358] scsi 3:0:0:0: Direct-Access     PNY      USB 2.0 FD       8.00 PQ: 0 ANSI: 4
[ 3023.778952] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3023.780420] sd 3:0:0:0: [sdc] 62531584 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3023.781129] sd 3:0:0:0: [sdc] Write Protect is off
[ 3023.781138] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3023.781851] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3023.788766]  sdc: sdc1
[ 3023.792847] sd 3:0:0:0: [sdc] Attached SCSI removable disk
yvon@HP-All-in-One-Mint:~$ 

[Yvon58]

J'ai fait ça aussi:

Code : Tout sélectionner

yvon@HP-All-in-One-Mint:~$ ifconfig
enp2s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 80:ce:62:35:6b:c6  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1113  bytes 79941 (79.9 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1113  bytes 79941 (79.9 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

yvon@HP-All-in-One-Mint:~$ sudo /etc/init.d/networking restart
[sudo] password for yvon:          
[ ok ] Restarting networking (via systemctl): networking.service.
yvon@HP-All-in-One-Mint:~$ 

la carte réseau est : Realtek PCIe GBE Family Controller

[zeb]

Bonjour,

sous windows comme sous Mint, pas de connexion wifi

Ca sent le bouton ou la combi de touches clavier

[alain]

salut

Ca sent le bouton ou la combi de touches clavier

Possible Zeb, mais j'ai bien peur que ça soit plus grave que ça.
Je ne vois pas de carte wifi "Wireless Network Adapter" dans ses retours.
Et rfkill ne renvoit rien (si bouton il renverrait au moins hard blocked : yes).
Enfin troisième raison que j'ai de douter d'un pb bouton ou combi clavier, c'est que c'est un "desktop".
Je ne connais pas de desktop avec possibilité de "hard blocking". En effet cette possibilité a été
mise sur les portables pour économiser la baterie, donc inutile sur un desktop...

@yvon.
Donnes nous tout de même les retours de:

Code : Tout sélectionner

sudo lshw -C network

Avec un "l" et pas un "I" ou un "1" .... Un "l" comme lolo ferrari
et pendant qu'on y est on va ratisser large:

Code : Tout sélectionner

lspci

et

Code : Tout sélectionner

lsusb

Mais franchement les espoirs sont mince de trouver une carte wifi... Je vais demander l'intervention
de st Ignucius, sait on jamais....

PS: Le PC3 de ma signature est un "HP desktop"... Il n'a pas de carte wifi...

[Yvon58]

Bonjour tout le monde.
Réessai ce matin: le wifi fonctionne en Windows mais toujours pas en Mint, ce qui parait logique vu qu'il ne trouve pas la carte wifi ...

Doncvoici le résultat:

Code : Tout sélectionner

yvon@HP-All-in-One-Mint:~$ sudo lshw -c network
[sudo] password for yvon:          
  *-network                 
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: enp2s0
       version: 10
       serial: 80:ce:62:35:6b:c6
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=half firmware=rtl8168g-3_0.0.1 04/23/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:16 ioport:d000(size=256) memory:df204000-df204fff memory:df200000-df203fff
  *-network UNCLAIMED
       description: Network controller
       product: RTL8821CE 802.11ac PCIe Wireless Network Adapter
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress cap_list
       configuration: latency=0
       resources: ioport:c000(size=256) memory:df100000-df10ffff
yvon@HP-All-in-One-Mint:~$ 

Je me demandais par ailleurs, est-ce que ça fonctionnerait avec un raccordement CPL ?

[Yvon58]

il me semble qu'il y a un firwmare à installer pour cette puce
mais perso beaucoup de soucis avec le realtek
Essaye la méthode brute, allez recompiler depuis les sources du git

Code : Tout sélectionner

sudo apt install git dkms build-essential
git clone https://github.com/tomaspinho/rtl8821ce.git
cd rtl8821ce
sudo ./dkms-install.sh

C'est sans danger ? (mes excuses si ma question est stupide)

[alain]

Bonjour Yvon.

Code : Tout sélectionner

yvon@HP-All-in-One-Mint:~$ sudo lshw -c network
[sudo] password for yvon:          
.................
................
       product: RTL8821CE 802.11ac PCIe Wireless Network Adapter
       vendor: Realtek Semiconductor Co., Ltd.
..............
.............     
yvon@HP-All-in-One-Mint:~$ 

Haaaa! Bin voila quand la commande est bien écrite ça ramène les cartes wifi
Tu vas pouvoir brûler un cierge à St Ignucius

Je me demandais par ailleurs, est-ce que ça fonctionnerait avec un raccordement CPL ?

Oui bien sur, ta carte ethernet semble bien fonctionner elle. Par contre l’utilisation du CPL peut amener d'autres problèmes
qui ne seront pas liés à linux. Mais si ça fonctionne bien sous windows, le cpl fonctionnera aussi bien sous linux (et vice versa).
Ce qui n'est pas le cas pour la wifi, pour une question de pilote, alors oui vas y tu peux faire ce que te propose Cyrille (de toute façon
à part installer un pilote, il n' y a rien d'autre à faire...)

Si tu as des problèmes pour l'installation du pilote, demande à ato-mike, c'est un spécialiste du rtl8821ce : viewtopic.php?f=18&t=14099&p=161210&hil ... ce#p159767

[Yvon58]

Bonjour à tous.
Bon, j'ai une bonne et une mauvaise nouvelle.

D'abord la bonne: le wifi marche. Je suis allé dans le gestionnaire de pilotes et j'ai fait une mise à jour des pilotes (j'ai branché un câble Ethernet) Ensuite j'ai vu que la carte wifi était bien présente mais la case "ne pas utiliser le périphérique cochée" Je l'ai donc décochée et le wifi a aussitôt été détecté puis connecté.

La mauvaise: j'ai également changé le pilote de carte graphique car celui qui était marqué "recommandé" n'était pas coché. Je l'ai donc fait, mais au redémarrage le logo Mint est immense et la case pour rentrer le code est a moitié visible dans le coin bas gauche. Après, ça marche correctement. Je vais essyer de remettre l'ancien pilote, mais j'ai un peu la trouille ...

A +
Yvon