En cours LM20 : lenteur généralisée du système

Postez ici toutes vos demandes d’assistance générale concernant le fonctionnement de Linux Mint, qui n'entrent pas dans les autres rubriques.
Avatar du membre
arghlub
Administrateur du site
Messages : 11788
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence

Re: LM20 : lenteur généralisée du système

Message par arghlub »

Dernier message de la page précédente :

Salut corto-landese,
corto-landese a écrit : ven. 2 oct. 2020 16:10 quand au résultat de dmesg il est assez gros (trop pour une capture d'écran) et contient plein de messages d'erreus (inutile de vous dire que je n'y comprends rien)
Sur ce forum, les retours des commandes en terminal se placent entre balises "code" ...
donc, plutôt que de faire une capture d'écran du terminal, faire un copier de celui-ci et le coller dans le message entre les balises "code" (sélectionner le code et cliquer sur Image), c'est plus simple pour toi et plus facile à lire pour les autres.
Pour l'utilisation des balises, voir tuto barre d'outils des messages
;)
Tour1 (custom) CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : LMint 22.3 | Debian 12 | MX Linux | XFCE
Tour2 (custom) CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 22.1 | MX Linux | XFCE
Portable2 MacBook Air A1466 | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MX Linux XFCE
─────( pour une informatique libre ! )─────
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

Oui je l'avais compris .... et j'ai essayé mais je ne suis pas arrivé à sélectionner le texte dans le terminal et à faire 'copier' : le fait de faire un clic droit sur la partie sélectionnée annule la sélection alors en désespoir de cause j'ai posté une capture d'écran en étant bien conscient que ce n'était pas le top.

il doit y avoir une astuce pour sélectionner dans la fenêtre terminal et copier la sélection mais je ne la connais pas.
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

OK, merci
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
arghlub
Administrateur du site
Messages : 11788
Enregistré le : dim. 21 mai 2017 08:19
Localisation : Provence

Re: LM20 : lenteur généralisée du système

Message par arghlub »

corto-landese a écrit : ven. 2 oct. 2020 20:01 il doit y avoir une astuce pour sélectionner dans la fenêtre terminal et copier la sélection mais je ne la connais pas.
en terminal pour copier une sélection,c'est le raccourci-clavier "Ctrl+Maj+c".
(note : ce n'est pas le "Ctrl+c" habituel, car ce raccourci est utilisé pour autre chose : interrompre une commande en cours d'exécution)
Tour1 (custom) CPU Intel I7-7700K | CG Nvidia GTX 1080 | RAM 16Go | tripleBoot : LMint 22.3 | Debian 12 | MX Linux | XFCE
Tour2 (custom) CPU AMD Athlon 5200+ | CG Nvidia GTX 560 | RAM 6Go | FreeBSD XFCE
Portable1 MSI GF75 Thin 9SC | CPU Intel I7-9750H | CG Nvidia GTX 1650 | RAM 32Go | dualBoot : LMint 22.1 | MX Linux | XFCE
Portable2 MacBook Air A1466 | CPU Intel I5-5250U | CG Intel HD Graphics 6000 | RAM 8Go | dualBoot : macOS Sierra | MX Linux XFCE
─────( pour une informatique libre ! )─────
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

voici donc (grâce à Cyrille) le fichier dmesg
accrochez vous c'est maousse ! (et ce n'est qu'une partie, après ça devient répétitif)

Code : Tout sélectionner

[ 2118.415554] mce: CPU0: Core temperature/speed normal
[ 2118.415555] mce: CPU2: Core temperature/speed normal
[ 2118.415556] mce: CPU1: Package temperature/speed normal
[ 2118.415556] mce: CPU3: Package temperature/speed normal
[ 2118.415557] mce: CPU2: Package temperature/speed normal
[ 2118.415558] mce: CPU0: Package temperature/speed normal
[ 2179.878065] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2179.878070] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2179.878072] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2179.878074] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2240.985662] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2240.985673] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2240.985681] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2240.985686] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2305.119570] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2305.119578] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2305.119581] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2305.119584] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2427.048570] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1760)
[ 2427.048571] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1760)
[ 2427.048573] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 4165)
[ 2427.048574] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 4165)
[ 2427.048575] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 4165)
[ 2427.048576] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 4165)
[ 2427.049548] mce: CPU2: Core temperature/speed normal
[ 2427.049548] mce: CPU0: Core temperature/speed normal
[ 2427.049549] mce: CPU2: Package temperature/speed normal
[ 2427.049550] mce: CPU0: Package temperature/speed normal
[ 2427.049578] mce: CPU1: Package temperature/speed normal
[ 2427.049578] mce: CPU3: Package temperature/speed normal
[ 2432.148967] perf: interrupt took too long (2620 > 2500), lowering kernel.perf_event_max_sample_rate to 76250
[ 2601.229331] kauditd_printk_skb: 14 callbacks suppressed
[ 2601.229333] audit: type=1400 audit(1601629924.554:26): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/pierre/Documents/Templates.clf" pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2601.229337] audit: type=1400 audit(1601629924.554:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/pierre/Documents/Templates.clf" pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2601.230684] audit: type=1400 audit(1601629924.554:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F7069657272652F446F63756D656E74732F4D79204C697374732E636C66 pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2601.230687] audit: type=1400 audit(1601629924.554:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F686F6D652F7069657272652F446F63756D656E74732F4D79204C697374732E636C66 pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2613.911960] audit: type=1400 audit(1601629937.239:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F6D656469612F7069657272652F446F6E6EC3A965732F2E77696E646F77732D73657269616C pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2613.911964] audit: type=1400 audit(1601629937.239:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/6662/mountinfo" pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2613.912205] audit: type=1400 audit(1601629937.239:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/run/mount/utab" pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 2613.913317] audit: type=1400 audit(1601629937.239:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F6D656469612F7069657272652F446F6E6EC3A965732F2E77696E646F77732D73657269616C pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2617.638077] audit: type=1400 audit(1601629940.959:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/6662/mountinfo" pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2617.638080] audit: type=1400 audit(1601629940.959:36): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/run/mount/utab" pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 2617.638082] audit: type=1400 audit(1601629940.959:35): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F6D656469612F7069657272652F446F6E6EC3A965732F4C696E75782D4D696E742F4F752073652074726F7576656E74206C65732069636F6E65732028646F737369657273207374616E646172647329 pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2617.638084] audit: type=1400 audit(1601629940.959:37): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F6D656469612F7069657272652F446F6E6EC3A965732F4C696E75782D4D696E742F564D776172652D506C617965722D31342E302E302D363636313332382E7838365F36342E62756E646C65 pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2617.638086] audit: type=1400 audit(1601629940.959:38): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F6D656469612F7069657272652F446F6E6EC3A965732F4C696E75782D4D696E742F4F752073652074726F7576656E74206C65732069636F6E65732028646F737369657273207374616E646172647329 pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2617.638088] audit: type=1400 audit(1601629940.959:39): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name=2F6D656469612F7069657272652F446F6E6EC3A965732F4C696E75782D4D696E742F436F6D6D656E7420696E73C3A972657220756E6520696D6167652064616E73206C6520666F72756D204C696E75782D4D696E74 pid=6662 comm="pool-soffice" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2618.925338] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2618.925343] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2618.925346] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2618.925347] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2621.158351] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2621.158358] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2621.158362] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2621.158364] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2686.300111] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2686.300116] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2686.300119] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2686.300121] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2727.048557] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 17484)
[ 2727.048558] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 17485)
[ 2727.048559] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 17485)
[ 2727.048560] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 17485)
[ 2727.052560] mce: CPU1: Package temperature/speed normal
[ 2727.052561] mce: CPU0: Package temperature/speed normal
[ 2727.052561] mce: CPU3: Package temperature/speed normal
[ 2727.052562] mce: CPU2: Package temperature/speed normal
[ 2727.085534] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 10024)
[ 2727.085535] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 10024)
[ 2727.086524] mce: CPU1: Core temperature/speed normal
[ 2727.086525] mce: CPU3: Core temperature/speed normal
[ 2746.372156] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2746.372160] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2746.372163] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2746.372165] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2807.944933] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2807.944942] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2807.944948] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2807.944952] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2846.535010] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2846.535016] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2846.535020] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2846.535023] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 2936.541446] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 2936.541466] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 2936.541468] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 2936.541470] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3001.928216] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3001.928221] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3001.928225] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3001.928227] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3027.788548] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 11326)
[ 3027.788549] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 11326)
[ 3027.788550] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 20943)
[ 3027.788552] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 20943)
[ 3027.788552] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 20943)
[ 3027.788554] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 20942)
[ 3027.814545] mce: CPU2: Core temperature/speed normal
[ 3027.814545] mce: CPU0: Core temperature/speed normal
[ 3027.814547] mce: CPU3: Package temperature/speed normal
[ 3027.814547] mce: CPU1: Package temperature/speed normal
[ 3027.814548] mce: CPU0: Package temperature/speed normal
[ 3027.814549] mce: CPU2: Package temperature/speed normal
[ 3059.917714] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3059.917745] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3059.917749] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3059.917751] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3061.930475] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3061.930480] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3061.930482] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3061.930484] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3122.971205] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3122.971210] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3122.971214] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3122.971216] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3187.157376] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3187.157381] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3187.157383] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3187.157385] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3222.731486] perf: interrupt took too long (3393 > 3275), lowering kernel.perf_event_max_sample_rate to 58750
[ 3248.935717] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3248.935724] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3248.935729] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3248.935731] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3317.178534] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3317.178538] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3317.178541] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3317.178542] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3370.704569] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 13132)
[ 3370.704570] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 13132)
[ 3370.704572] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 24789)
[ 3370.704573] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 24789)
[ 3370.704574] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 24789)
[ 3370.704575] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 24788)
[ 3370.705515] mce: CPU2: Core temperature/speed normal
[ 3370.705516] mce: CPU1: Package temperature/speed normal
[ 3370.705517] mce: CPU0: Core temperature/speed normal
[ 3370.705518] mce: CPU3: Package temperature/speed normal
[ 3370.705518] mce: CPU0: Package temperature/speed normal
[ 3370.705519] mce: CPU2: Package temperature/speed normal
[ 3452.213837] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3452.213842] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3452.213845] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3452.213846] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3502.223277] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3502.223282] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3502.223285] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3502.223286] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3537.212301] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3537.212305] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3537.212308] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3537.212322] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3563.940045] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3563.940050] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3563.940052] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3563.940054] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3567.246464] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3567.246469] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3567.246472] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3567.246474] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3632.333691] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3632.333696] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3632.333699] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3632.333700] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3657.277074] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3657.277079] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3657.277082] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3657.277083] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3670.698528] mce: CPU2: Core temperature/speed normal
[ 3670.698529] mce: CPU0: Core temperature/speed normal
[ 3670.698530] mce: CPU1: Package temperature/speed normal
[ 3670.698531] mce: CPU3: Package temperature/speed normal
[ 3670.698532] mce: CPU0: Package temperature/speed normal
[ 3670.698533] mce: CPU2: Package temperature/speed normal
[ 3692.342677] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3692.342682] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3692.342685] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3692.342686] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3752.948930] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3752.948935] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3752.948939] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3752.948940] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3817.267438] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3817.267443] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3817.267446] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3817.267448] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3878.944057] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3878.944062] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3878.944065] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3878.944066] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3947.278322] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 3947.278327] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 3947.278329] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 3947.278331] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 3984.670517] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 18862)
[ 3984.670518] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 18862)
[ 3984.670520] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 35642)
[ 3984.670521] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 35642)
[ 3984.670522] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 35641)
[ 3984.670523] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 35642)
[ 3984.672547] mce: CPU0: Core temperature/speed normal
[ 3984.672548] mce: CPU2: Core temperature/speed normal
[ 3984.672549] mce: CPU3: Package temperature/speed normal
[ 3984.672550] mce: CPU1: Package temperature/speed normal
[ 3984.672550] mce: CPU2: Package temperature/speed normal
[ 3984.672552] mce: CPU0: Package temperature/speed normal
[ 4004.927306] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4004.927312] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4004.927316] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4004.927319] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4007.334210] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4007.334215] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4007.334219] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4007.334221] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4067.936631] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4067.936637] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4067.936640] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4067.936642] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4127.770911] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4127.770916] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4127.770918] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4127.770920] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4130.886458] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4130.886465] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4130.886470] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4130.886474] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4132.777151] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4132.777156] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4132.777158] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4132.777160] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4193.939720] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4193.939726] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4193.939729] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4193.939731] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4319.949281] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4319.949286] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4319.949289] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4319.949290] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4382.952851] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4382.952857] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4382.952860] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4382.952863] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4447.876035] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4447.876039] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4447.876042] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4447.876043] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4481.378545] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 19025)
[ 4481.378546] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 19025)
[ 4481.378547] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 35965)
[ 4481.378549] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 35965)
[ 4481.378550] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 35965)
[ 4481.378551] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 35964)
[ 4481.380542] mce: CPU2: Core temperature/speed normal
[ 4481.380543] mce: CPU0: Core temperature/speed normal
[ 4481.380544] mce: CPU1: Package temperature/speed normal
[ 4481.380545] mce: CPU3: Package temperature/speed normal
[ 4481.380546] mce: CPU0: Package temperature/speed normal
[ 4481.380547] mce: CPU2: Package temperature/speed normal
[ 4508.901855] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4508.901861] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4508.901865] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4508.901867] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4634.958107] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4634.958128] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4634.958132] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4634.958134] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4760.945573] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4760.945588] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4760.945601] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4760.945610] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4886.942521] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4886.942536] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4886.942549] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4886.942557] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4909.058289] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4909.058294] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4909.058296] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4909.058298] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4919.057850] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4919.057854] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4919.057857] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4919.057859] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 4932.599566] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 19999)
[ 4932.599567] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 19999)
[ 4932.599568] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 37479)
[ 4932.599569] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 37478)
[ 4932.599600] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 37479)
[ 4932.599601] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 37479)
[ 4932.601525] mce: CPU0: Core temperature/speed normal
[ 4932.601526] mce: CPU2: Core temperature/speed normal
[ 4932.601527] mce: CPU3: Package temperature/speed normal
[ 4932.601528] mce: CPU1: Package temperature/speed normal
[ 4932.601528] mce: CPU2: Package temperature/speed normal
[ 4932.601530] mce: CPU0: Package temperature/speed normal
[ 4949.962571] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 4949.962577] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 4949.962581] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 4949.962584] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5075.943369] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5075.943384] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5075.943397] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5075.943405] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5139.991134] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5139.991139] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5139.991142] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5139.991144] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5201.955210] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5201.955218] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5201.955224] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5201.955228] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5270.130088] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5270.130092] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5270.130095] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5270.130096] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5344.567555] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 20217)
[ 5344.567556] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 20217)
[ 5344.567557] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 37969)
[ 5344.567558] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 37968)
[ 5344.567589] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 37969)
[ 5344.567590] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 37969)
[ 5344.568583] mce: CPU2: Core temperature/speed normal
[ 5344.568584] mce: CPU0: Core temperature/speed normal
[ 5344.568585] mce: CPU0: Package temperature/speed normal
[ 5344.568585] mce: CPU2: Package temperature/speed normal
[ 5344.568619] mce: CPU3: Package temperature/speed normal
[ 5344.568620] mce: CPU1: Package temperature/speed normal
[ 5355.173041] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5355.173046] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5355.173048] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5355.173050] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5390.962137] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5390.962144] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5390.962148] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5390.962150] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5405.139610] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5405.139615] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5405.139618] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5405.139619] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5645.186391] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5645.186395] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5645.186398] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5645.186399] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5689.122541] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 20219)
[ 5689.122542] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 20219)
[ 5689.122544] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 37971)
[ 5689.122545] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 37971)
[ 5689.122546] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 37970)
[ 5689.122547] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 37971)
[ 5689.123530] mce: CPU0: Core temperature/speed normal
[ 5689.123530] mce: CPU2: Core temperature/speed normal
[ 5689.123531] mce: CPU1: Package temperature/speed normal
[ 5689.123532] mce: CPU3: Package temperature/speed normal
[ 5689.123532] mce: CPU2: Package temperature/speed normal
[ 5689.123534] mce: CPU0: Package temperature/speed normal
[ 5705.938216] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5705.938231] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5705.938244] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5705.938253] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5770.255683] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 5770.255687] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 5770.255690] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 5770.255691] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 5998.252549] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 20677)
[ 5998.252550] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 20677)
[ 5998.252552] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 38362)
[ 5998.252552] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 38362)
[ 5998.252578] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 38362)
[ 5998.252579] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 38361)
[ 5998.253544] mce: CPU3: Core temperature/speed normal
[ 5998.253545] mce: CPU1: Core temperature/speed normal
[ 5998.253546] mce: CPU3: Package temperature/speed normal
[ 5998.253546] mce: CPU1: Package temperature/speed normal
[ 5998.253574] mce: CPU2: Package temperature/speed normal
[ 5998.253575] mce: CPU0: Package temperature/speed normal
[ 6083.916638] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6083.916642] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6083.916645] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6083.916646] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6146.950924] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6146.950937] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6146.950948] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6146.950955] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6181.738546] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6181.738566] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6181.738568] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6181.738569] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6272.946821] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6272.946842] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6272.946860] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6272.946874] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6401.798251] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6401.798256] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6401.798258] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6401.798260] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6466.814609] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6466.814613] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6466.814616] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6466.814617] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6526.829579] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6526.829584] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6526.829586] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6526.829588] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6587.928419] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6587.928427] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6587.928432] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6587.928435] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6776.956984] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6776.956989] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6776.956991] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6776.956993] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6841.910233] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6841.910238] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6841.910241] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6841.910242] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 6966.945915] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 6966.945919] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 6966.945922] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 6966.945923] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7097.005099] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7097.005120] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7097.005122] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7097.005124] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7156.994418] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7156.994462] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7156.994465] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7156.994466] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7267.801532] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 20396)
[ 7267.801533] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 20396)
[ 7267.801534] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 38457)
[ 7267.801535] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 38456)
[ 7267.801566] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 38457)
[ 7267.801567] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 38457)
[ 7267.802541] mce: CPU2: Core temperature/speed normal
[ 7267.802542] mce: CPU3: Package temperature/speed normal
[ 7267.802543] mce: CPU1: Package temperature/speed normal
[ 7267.802543] mce: CPU0: Core temperature/speed normal
[ 7267.802545] mce: CPU2: Package temperature/speed normal
[ 7267.802545] mce: CPU0: Package temperature/speed normal
[ 7347.041831] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7347.041851] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7347.041854] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7347.041855] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7412.064017] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7412.064022] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7412.064024] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7412.064026] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7469.897477] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7469.897494] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7469.897507] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7469.897519] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7472.072261] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7472.072265] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7472.072268] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7472.072269] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7537.084689] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7537.084694] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7537.084696] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7537.084698] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7662.116402] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7662.116443] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7662.116445] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7662.116447] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7712.127397] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7712.127402] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7712.127406] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7712.127407] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7727.136764] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7727.136768] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7727.136771] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7727.136772] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7784.904855] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7784.904872] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7784.904884] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7784.904893] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7787.148051] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7787.148056] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7787.148074] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[ 7787.148076] pcieport 0000:00:1c.0: AER:    [ 0] RxErr                 
[ 7847.911687] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[ 7847.911702] pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 7847.911716] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

si c'est dû au fait que ma config ne supporte pas les fonctionnalités de Mint 20 merci de m'indiquer si la version 19.3 passerait (si vous en avez la moindre idée bien sûr), jusqu'à maintenant la 18.3 passait sans problèmes.
Après le mieux est peut-être l'ennemi du bien , c'est surtout pour bénéficier des MàJ plus longtemps qu'avec la V18
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

autre 'curiosité', cet aprèm j'avais dans dmesg plein de messages d'erreur ACPI et là je n'en vois pas !!
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

effectivement, c'est logique :D
mais ça fait quand même beaucoup de cas d'erreurs :cry:

quand à tes conseils concernant Grub, merci mais je vais attendre demain (et la journée devant moi) parce qu'en général, avec moi, tout ce qui s'approche de ce mot se termine par une ré-install complète à partir d'une clé USB :evil:
j'ai cherché pendant des mois (avant le covid) une formation sur le sujet (sur Bdx et environs) ..... ou un tuto compréhensible par une buse (moi) mais avec le souvenir d'avoir essayé dans le temps et d'y avoir gagné une ré-install à chaque fois.
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

Oui, je suis d'accord mais il y a un moment ou il faut arrêter de tâtonner, de patauger, de me....r ..... parce qu'on a besoin d'un ordinateur opérationnel pour pouvoir faire tout ce dont on a besoin avec.
Et avec la 18, .1, .2, .3 j'avais presque oublié les clés bootables.
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

Et voici les ACPI errors,peut-être ne se produisent-elles qu'au démarrage

Code : Tout sélectionner

0.124623] ACPI: Added _OSI(Module Device)
[    0.124623] ACPI: Added _OSI(Processor Device)
[    0.124623] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124623] ACPI: Added _OSI(Processor Aggregator Device)
[    0.124623] ACPI: Added _OSI(Linux-Dell-Video)
[    0.124623] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.124623] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.156355] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.158882] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.162331] ACPI: Dynamic OEM Table Load:
[    0.162336] ACPI: SSDT 0xFFFF8DA7AA36F000 000660 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.163674] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.165199] ACPI: Dynamic OEM Table Load:
[    0.165203] ACPI: SSDT 0xFFFF8DA7A9F4DC00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.166454] ACPI: Dynamic OEM Table Load:
[    0.166457] ACPI: SSDT 0xFFFF8DA7AA2F1CC0 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
[    0.166457] ACPI: Dynamic OEM Table Load:
[    0.166457] ACPI: SSDT 0xFFFF8DA7A9D5C800 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
[    0.168639] ACPI: Dynamic OEM Table Load:
[    0.168646] ACPI: SSDT 0xFFFF8DA7AA368000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.170165] ACPI: Dynamic OEM Table Load:
[    0.170168] ACPI: SSDT 0xFFFF8DA7A9D5E800 000119 (v02 PmRef  ApHwp    00003000 INTL 20120913)
[    0.171381] ACPI: Dynamic OEM Table Load:
[    0.171384] ACPI: SSDT 0xFFFF8DA7A9D5EE00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.174993] ACPI: EC: EC started
[    0.174994] ACPI: EC: interrupt blocked
[    0.279759] ACPI Error: Needed type [Reference], found [Integer] 0000000082bea544 (20190816/exresop-66)
[    0.279783] fbcon: Taking over console
[    0.279784] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20190816/dswexec-431)
[    0.279792] No Local Variables are initialized for Method [_REG]
[    0.279793] Initialized Arguments for Method [_REG]:  (2 arguments defined for method invocation)
[    0.279793]   Arg0:   000000009d7fde67 <Obj>           Integer 0000000000000003
[    0.279796]   Arg1:   000000003e5bcc3d <Obj>           Integer 0000000000000001
[    0.279798] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC._REG due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529)
[    0.279806] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.279807] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.279808] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    0.279809] ACPI: Interpreter enabled
[    0.279845] ACPI: (supports S0 S3 S4 S5)
[    0.279846] ACPI: Using IOAPIC for interrupt routing
[    0.279880] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.280454] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.282899] ACPI: Power Resource [PG00] (on)
[    0.283248] ACPI: Power Resource [PG01] (on)
[    0.283586] ACPI: Power Resource [PG02] (on)
[    0.284938] ACPI: Power Resource [WRST] (off)
[    0.285291] ACPI: Power Resource [WRST] (off)
[    0.285636] ACPI: Power Resource [WRST] (off)
[    0.285980] ACPI: Power Resource [WRST] (off)
[    0.286324] ACPI: Power Resource [WRST] (off)
[    0.286667] ACPI: Power Resource [WRST] (off)
[    0.287020] ACPI: Power Resource [WRST] (off)
[    0.287364] ACPI: Power Resource [WRST] (off)
[    0.287735] ACPI: Power Resource [WRST] (off)
[    0.288084] ACPI: Power Resource [WRST] (off)
[    0.288438] ACPI: Power Resource [WRST] (off)
[    0.288790] ACPI: Power Resource [WRST] (off)
[    0.289134] ACPI: Power Resource [WRST] (off)
[    0.289480] ACPI: Power Resource [WRST] (off)
[    0.289824] ACPI: Power Resource [WRST] (off)
[    0.290167] ACPI: Power Resource [WRST] (off)
[    0.290513] ACPI: Power Resource [WRST] (off)
[    0.290864] ACPI: Power Resource [WRST] (off)
[    0.291207] ACPI: Power Resource [WRST] (off)
[    0.291551] ACPI: Power Resource [WRST] (off)
[    0.300303] ACPI: Power Resource [FN00] (off)
[    0.300396] ACPI: Power Resource [FN01] (off)
[    0.300489] ACPI: Power Resource [FN02] (off)
[    0.300577] ACPI: Power Resource [FN03] (off)
[    0.300667] ACPI: Power Resource [FN04] (off)
[    0.301823] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.301829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.303429] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.303430] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.304150] PCI host bridge to bus 0000:00
[    0.304151] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.304152] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.304153] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.304154] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]
[    0.304155] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.304156] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.304164] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.304281] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.304290] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.304294] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.304298] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.304311] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.304491] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.304511] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
[    0.304574] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.304717] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.304736] pci 0000:00:14.2: reg 0x10: [mem 0xdf22e000-0xdf22efff 64bit]
[    0.304898] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.304922] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
[    0.304986] pci 0000:00:16.0: PME# supported from D3hot
[    0.305135] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.305149] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
[    0.305155] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
[    0.305160] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.305166] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.305172] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.305177] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
[    0.305211] pci 0000:00:17.0: PME# supported from D3hot
[    0.305356] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[    0.305419] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.305611] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.305676] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.305866] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.306091] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.306103] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
[    0.306262] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.306286] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
[    0.306308] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
[    0.306352] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.306549] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.306608] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
[    0.306676] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.306936] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000
[    0.306983] pci 0000:01:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[    0.307152] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.307318] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.307322] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.307380] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.307402] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.307421] pci 0000:02:00.0: reg 0x18: [mem 0xdf000000-0xdf000fff 64bit]
[    0.307433] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.307520] pci 0000:02:00.0: supports D1 D2
[    0.307521] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.307658] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.307660] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.307662] pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.307665] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.309349] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.309407] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.309463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.309519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.309574] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.309629] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.309684] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.309739] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310351] ACPI: EC: interrupt unblocked
[    0.310370] ACPI: EC: event unblocked
[    0.310381] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.310382] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions and events
[    0.310457] iommu: Default domain type: Translated 
[    0.310457] SCSI subsystem initialized
[    0.310457] libata version 3.00 loaded.
[    0.310457] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.310457] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.310457] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.310457] vgaarb: loaded
[    0.310457] ACPI: bus type USB registered
[    0.310457] usbcore: registered new interface driver usbfs
[    0.310457] usbcore: registered new interface driver hub
[    0.310457] usbcore: registered new device driver usb
[    0.310457] pps_core: LinuxPPS API ver. 1 registered
[    0.310457] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.310457] PTP clock support registered
[    0.310457] EDAC MC: Ver: 3.0.0
[    0.310457] Registered efivars operations
[    0.310457] PCI: Using ACPI for IRQ routing
[    0.339648] PCI: pci_cache_line_size set to 64 bytes
[    0.339688] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.339689] e820: reserve RAM buffer [mem 0x80a0a018-0x83ffffff]
[    0.339690] e820: reserve RAM buffer [mem 0x81cea000-0x83ffffff]
[    0.339690] e820: reserve RAM buffer [mem 0x86918000-0x87ffffff]
[    0.339691] e820: reserve RAM buffer [mem 0x8755d000-0x87ffffff]
[    0.339767] NetLabel: Initializing
[    0.339768] NetLabel:  domain hash size = 128
[    0.339768] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.339782] NetLabel:  unlabeled traffic allowed by default
[    0.340443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.340446] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.342477] clocksource: Switched to clocksource tsc-early
[    0.349574] *** VALIDATE bpf ***
[    0.349639] VFS: Disk quotas dquot_6.6.0
[    0.349652] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.349672] *** VALIDATE ramfs ***
[    0.349675] *** VALIDATE hugetlbfs ***
[    0.349751] AppArmor: AppArmor Filesystem Enabled
[    0.349774] pnp: PnP ACPI init
[    0.349953] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.349999] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.350130] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.350132] system 00:02: [io  0xffff] has been reserved
[    0.350132] system 00:02: [io  0xffff] has been reserved
[    0.350133] system 00:02: [io  0xffff] has been reserved
[    0.350134] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.350135] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.350138] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.350224] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.350257] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.350259] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.350485] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.350486] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.350487] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.350487] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.350488] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.350489] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.350490] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.350492] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.350493] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.350494] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.350497] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.350533] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.350534] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.350535] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.350536] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.350537] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.350538] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.350539] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.350541] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.350818] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.350820] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.352009] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.352010] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.352011] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.352012] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.352013] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.352015] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.352671] pnp: PnP ACPI: found 9 devices
[    0.353715] thermal_sys: Registered thermal governor 'fair_share'
[    0.353715] thermal_sys: Registered thermal governor 'bang_bang'
[    0.353716] thermal_sys: Registered thermal governor 'step_wise'
[    0.353716] thermal_sys: Registered thermal governor 'user_space'
[    0.353717] thermal_sys: Registered thermal governor 'power_allocator'
[    0.358207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.358235] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.358239] pci 0000:00:1c.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.358244] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.358248] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.358251] pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.358256] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.358261] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.358261] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.358262] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.358263] pci_bus 0000:00: resource 7 [mem 0x8b000000-0xdfffffff window]
[    0.358264] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.358265] pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.358266] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.358267] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.358267] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.358398] NET: Registered protocol family 2
[    0.358517] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.358560] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.358675] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.358775] TCP: Hash tables configured (established 65536 bind 65536)
[    0.358806] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.358826] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.358864] NET: Registered protocol family 1
[    0.358868] NET: Registered protocol family 44
[    0.358876] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.368218] PCI: CLS 0 bytes, default 64
[    0.368250] Trying to unpack rootfs image as initramfs...
[    0.535101] Initramfs unpacking failed: Decoding failed
[    0.544316] Freeing initrd memory: 83348K
[    0.571973] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.571975] software IO TLB: mapped [mem 0x7ca0a000-0x80a0a000] (64MB)
[    0.572166] check: Scanning for low memory corruption every 60 seconds
[    0.572541] Initialise system trusted keyrings
[    0.572549] Key type blacklist registered
[    0.572573] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.573722] zbud: loaded
[    0.574044] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.574182] fuse: init (API version 7.31)
[    0.574196] *** VALIDATE fuse ***
[    0.574197] *** VALIDATE fuse ***
[    0.574273] Platform Keyring initialized
[    0.577411] Key type asymmetric registered
[    0.577412] Asymmetric key parser 'x509' registered
[    0.577418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.577457] io scheduler mq-deadline registered
[    0.577760] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.577810] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[    0.578020] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123
[    0.578063] pcieport 0000:00:1c.5: AER: enabled with IRQ 123
[    0.578117] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.578162] efifb: probing for efifb
[    0.578178] efifb: No BGRT, not showing boot graphics
[    0.578179] efifb: framebuffer at 0xc0000000, using 6892k, total 6890k
[    0.578180] efifb: mode is 1680x1050x32, linelength=6720, pages=1
[    0.578180] efifb: scrolling: redraw
[    0.578181] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.578266] Console: switching to colour frame buffer device 210x65
[    0.581361] fb0: EFI VGA frame buffer device
[    0.581368] intel_idle: MWAIT substates: 0x11142120
[    0.581369] intel_idle: v0.4.1 model 0x4E
[    0.581578] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.595711] ACPI: AC Adapter [ADP1] (on-line)
[    0.595808] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.595823] ACPI: Lid Switch [LID0]
[    0.595848] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.595896] ACPI: Power Button [PWRB]
[    0.595934] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.595950] ACPI: Sleep Button [SLPB]
[    0.595980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.596003] ACPI: Power Button [PWRF]
[    0.597425] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.PLMX], AE_NOT_FOUND (20190816/psargs-330)
[    0.597466] No Local Variables are initialized for Method [_TMP]
[    0.597467] No Arguments are initialized for method [_TMP]
[    0.597470] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.597651] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.PLMX], AE_NOT_FOUND (20190816/psargs-330)
[    0.597686] No Local Variables are initialized for Method [_TMP]
[    0.597687] No Arguments are initialized for method [_TMP]
[    0.597689] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.597786] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.PECH], AE_NOT_FOUND (20190816/psargs-330)
[    0.597821] No Local Variables are initialized for Method [_TMP]
[    0.597822] No Arguments are initialized for method [_TMP]
[    0.597823] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.597913] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.HEC.PECH], AE_NOT_FOUND (20190816/psargs-330)
[    0.597948] No Local Variables are initialized for Method [_TMP]
[    0.597949] No Arguments are initialized for method [_TMP]
[    0.597951] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.598245] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.600362] Linux agpgart interface v0.103
[    0.602096] loop: module loaded
[    0.602258] libphy: Fixed MDIO Bus: probed
[    0.602258] tun: Universal TUN/TAP device driver, 1.6
[    0.602302] PPP generic driver version 2.4.2
[    0.602339] VFIO - User Level meta-driver version: 0.3
[    0.602395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.602397] ehci-pci: EHCI PCI platform driver
[    0.602420] ehci-platform: EHCI generic platform driver
[    0.602429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.602430] ohci-pci: OHCI PCI platform driver
[    0.602436] ohci-platform: OHCI generic platform driver
[    0.602441] uhci_hcd: USB Universal Host Controller Interface driver
[    0.602604] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.602609] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.603669] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    0.603745] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.603902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.603903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.603904] usb usb1: Product: xHCI Host Controller
[    0.603905] usb usb1: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[    0.603906] usb usb1: SerialNumber: 0000:00:14.0
[    0.604046] hub 1-0:1.0: USB hub found
[    0.604059] hub 1-0:1.0: 12 ports detected
[    0.605328] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.605331] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.605333] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.605361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.605363] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.605363] usb usb2: Product: xHCI Host Controller
[    0.605364] usb usb2: Manufacturer: Linux 5.4.0-48-generic xhci-hcd
[    0.605365] usb usb2: SerialNumber: 0000:00:14.0
[    0.605473] hub 2-0:1.0: USB hub found
[    0.605483] hub 2-0:1.0: 6 ports detected
[    0.606058] usb: port power management may be unreliable
[    0.606158] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.660121] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.660124] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.660276] mousedev: PS/2 mouse device common for all mice
[    0.660874] rtc_cmos 00:03: RTC can wake from S4
[    0.661208] rtc rtc0: invalid alarm value: 2020-10-03T25:61:41
[    0.661310] rtc_cmos 00:03: registered as rtc0
[    0.661321] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.661326] i2c /dev entries driver
[    0.661371] device-mapper: uevent: version 1.0.3
[    0.661428] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    0.661447] platform eisa.0: Probing EISA bus 0
[    0.661450] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.661452] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.661452] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.661453] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.661454] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.661454] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.661455] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.661456] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.661456] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.661457] platform eisa.0: EISA: Detected 0 cards
[    0.661460] intel_pstate: Intel P-state driver initializing
[    0.661739] intel_pstate: HWP enabled
[    0.661767] ledtrig-cpu: registered to indicate activity on CPUs
[    0.661768] EFI Variables Facility v0.08 2004-May-17
[    0.665368] intel_pmc_core INT33A1:00:  initialized
[    0.665426] drop_monitor: Initializing network drop monitor service
[    0.665561] NET: Registered protocol family 10
[    0.670695] Segment Routing with IPv6
[    0.670726] NET: Registered protocol family 17
[    0.670778] Key type dns_resolver registered
[    0.670993] RAS: Correctable Errors collector initialized.
[    0.671037] microcode: sig=0x406e3, pf=0x80, revision=0xd6
[    0.671133] microcode: Microcode Update Driver: v2.2.
[    0.671150] IPI shorthand broadcast: enabled
[    0.671154] sched_clock: Marking stable (670811333, 319235)->(675142944, -4012376)
[    0.671205] registered taskstats version 1
[    0.671212] Loading compiled-in X.509 certificates
[    0.671774] Loaded X.509 cert 'Build time autogenerated kernel key: 5aa626cbe865232f20021a0a6b2c5343f252875d'
[    0.671796] zswap: loaded using pool lzo/zbud
[    0.671838] Key type ._fscrypt registered
[    0.671838] Key type .fscrypt registered
[    0.676306] Key type big_key registered
[    0.678459] Key type encrypted registered
[    0.678461] AppArmor: AppArmor sha1 policy hashing enabled
[    0.678688] integrity: Loading X.509 certificate: UEFI:db
[    0.678712] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.678712] integrity: Loading X.509 certificate: UEFI:db
[    0.678727] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.678906] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.678919] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    0.678919] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.679130] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.679798] ima: No TPM chip found, activating TPM-bypass!
[    0.679803] ima: Allocated hash algorithm: sha1
[    0.679807] ima: No architecture policies found
[    0.679816] evm: Initialising EVM extended attributes:
[    0.679816] evm: security.selinux
[    0.679816] evm: security.SMACK64
[    0.679817] evm: security.SMACK64EXEC
[    0.679817] evm: security.SMACK64TRANSMUTE
[    0.679817] evm: security.SMACK64MMAP
[    0.679818] evm: security.apparmor
[    0.679818] evm: security.ima
[    0.679818] evm: security.capability
[    0.679819] evm: HMAC attrs: 0x1
[    0.680686] PM:   Magic number: 8:808:467
[    0.680910] rtc_cmos 00:03: setting system clock to 2020-10-03T06:27:41 UTC (1601706461)
[    0.681826] Freeing unused decrypted memory: 2040K
[    0.682226] Freeing unused kernel image memory: 2716K
[    0.700063] Write protecting the kernel read-only data: 22528k
[    0.700669] Freeing unused kernel image memory: 2008K
[    0.700988] Freeing unused kernel image memory: 1188K
[    0.701756] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.709801] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.709802] x86/mm: Checking user space page tables
[    0.718237] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.718238] Run /init as init process
[    0.820182] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    0.820217] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.821418] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.821424] r8169 0000:02:00.0: enabling device (0000 -> 0003)
[    0.821747] ahci 0000:00:17.0: version 3.0
[    0.822176] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[    0.822179] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.827209] libphy: r8169: probed
[    0.827411] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl, 00:e0:4c:ce:00:49, XID 2c9, IRQ 125
[    0.827413] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.829709] scsi host0: ahci
[    0.832794] scsi host1: ahci
[    0.833596] scsi host2: ahci
[    0.833648] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 126
[    0.833649] ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 126
[    0.833651] ata3: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b200 irq 126
[    0.843906] r8169 0000:02:00.0 enp2s0: renamed from eth0
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Avatar du membre
corto-landese
Messages : 176
Enregistré le : mer. 19 avr. 2017 19:59
Localisation : banlieue bordelaise

Re: LM20 : lenteur généralisée du système

Message par corto-landese »

et, après reboot le dmesg dégraissé par grep (merci Cyrille)

Code : Tout sélectionner

0.273003] ACPI Error: Aborting method \_SB.PCI0.LPCB.H_EC._REG due to previous error (AE_AML_OPERAND_TYPE) (20190816/psparse-529)
[    0.583806] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.584022] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.584155] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[    0.584281] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[   65.181579] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[   66.224913] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   66.224923] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[   67.488929] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   67.488940] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[   67.681895] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   67.681906] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[   67.717005] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   67.717016] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[   95.013627] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   95.013637] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[   97.444785] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[   97.444792] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
[  128.187127] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
[  128.187159] pcieport 0000:00:1c.0: AER:   device [8086:9d14] error status/mask=00000001/00002000
pierre@Vorke-Linux:~$ 
desktop : micro PC UM700(minis forum) : AMD Ryzen 7 3750H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit
micro PC Vorke V2 : AMD Ryzen 3 2500H , Radeon Vega Mobile Gfx × 4 ; 128 Go SSD mSata M2 (dual boot Linux/W10) + 500 Go SSD SATA), Linux/Mint 22.2 avec Cinnamon 64-bit

laptop : Sony VAIO (ancien[2010]) : Linux/Mint 21.3 avec Cinnamon 64-bit

tablettes : Galaxy tab2 (rom custom "Bliss rom" [android 6.0]), Galaxy tab10 (rom standard [android 10])

Raspberry Pi : modèle 3B+ et 4B avec chacun 1 SSD mSata de 128 Go, Raspberry Pi OS pour Pi-Hole et Home assistant
Répondre