Le logo de démarrage mint "tetris"

[Robinwood]

Dernier message de la page précédente :

Code : Tout sélectionner

sudo get-edid > my-edid.bin
[sudo] password for robin: 
This is read-edid version 3.0.1. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 1
1 potential busses found: 0
Bus 0 doesn't really have an EDID...
Couldn't find an accessible EDID on this computer.
Attempting to use the classical VBE interface

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
	Function supported
	Call successful

	VBE version 300
	VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
	Report DDC capabilities

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
	Function supported
	Call successful

	Monitor and video card combination does not support DDC1 transfers
	Monitor and video card combination supports DDC2 transfers
	0 seconds per 128 byte EDID block transfer
	Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
	Read EDID

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
	Function supported
	Call failed

The EDID data should not be trusted as the VBE call failed
Looks like VBE was successful. Have a good day.

Code : Tout sélectionner

parse-edid < my-edid.bin
Checksum Correct
Header incorrect. Probably not an edid
Something strange happened. Please contact the author,
Matthew Kern at <pyrophobicman@gmail.com>

Je ne trouve pas edid, mais edid-decode (que j'ai installé) et read-edid.

[Robinwood]

Pour le moment faux de bon yeux:

Du coup retour sur le pilotenouveau en attendant, car vraiment impraticable en 800x600.

[tyrry]

ici section 4 devrait résoudre tes soucis
https://doc.ubuntu-fr.org/plymouth" onclick="window.open(this.href);return false;
@+

[mpat]

[Robinwood]

Code : Tout sélectionner

This is read-edid version 3.0.1. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 1
1 potential busses found: 0
Bus 0 doesn't really have an EDID...
Couldn't find an accessible EDID on this computer.
Attempting to use the classical VBE interface

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
	Function supported
	Call successful

	VBE version 300
	VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
	Report DDC capabilities

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
	Function supported
	Call successful

	Monitor and video card combination does not support DDC1 transfers
	Monitor and video card combination supports DDC2 transfers
	0 seconds per 128 byte EDID block transfer
	Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
	Read EDID

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
	Function supported
	Call failed

Code : Tout sélectionner

The EDID data should not be trusted as the VBE call failed
Looks like VBE was successful. Have a good day.
parse-edid < my-edid.bin
Checksum Correct
Header incorrect. Probably not an edid
Something strange happened. Please contact the author,
Matthew Kern at <pyrophobicman@gmail.com>

[mpat]

tu est connecté en hdmi il est pas reconnu.
suivre le lien de Tyrry en espérant qu ça marche pour l'hdmi

[Robinwood]

Retour de bataille, un peut difficile avec cette résolution microscopique .
En DVI (vieux PC), transformé en HDMI.
J'ai appliqué tous le lien, pareil.
La meilleur résolution reste le driver libre nouveau, un peu criard, mais correcte.
Ce sujet n'ai peut-être pas si faut:viewtopic.php?f=17&t=1717

[tyrry]

En DVI (vieux PC), transformé en HDMI.

Peut-être ici ton souci , mauvais "cordon / adaptateur" ?
@+

[Robinwood]

Je vais tenter un bon câble .

[Robinwood]

Bonjour,
câble neuf le résultat est le même , retour sur le driver nouveau, qui m'offre les meilleurs résultats .

[Robinwood]

Sur le sujet les noyaux, Mpat parlait de l'incompatibilité nvidia et du noyau 4.4.
Je suis repassé sur 3.19 et le driver nvidia marche.