Résolu Démarrage très long.

[paco]

Bonjour
Suite à mes problèmes avec cinnamon, j'ai changé de version et suis passé à LM18 en réinstallant tout (j'étais en17.2 puis 17.3).
Une chose que j'appréciais énormément avec Mint, c'est la vitesse à laquelle il démarrait. C'était vraiment très rapide. Depuis que je suis passé à LM18, c'est tout le contraire. Entre le moment ou j'ai le logo LM et l'affichage de la boîte qui demande mon mot de passe, j'attends presque 2 minutes. Je pense qu'il doit se passer quelque-chose d'un peu anormal pendant la phase de chargement. Existe t-il un fichier ou une commande, qui permet de voir ce qui se passe "derrière" le logo MINT ?

[AngeDesOmbres]

Salut,
Je ne te serrais pas d'une grande aide mais peux tu nous renvoyer les résultats des commande

Code : Tout sélectionner

dmesg

puis

Code : Tout sélectionner

systemd-analyze

Et

Code : Tout sélectionner

systemd-analyze blame

Pense à poster les réponses entre balise code
Les docs passeront bientôt par la
Bien à toi.
Bye.

[paco]

Bonjour AngeDesOmbres
Merci de t'occuper de mon cas.
Ça cause beaucoup "dmesg". J'aime la littérature... mais pas celle là !
Bon courage.

Code : Tout sélectionner

paco@Petit-noir-costaud-64X2 ~ $ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-21-generic (buildd@lgw01-06) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:34:49 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffaffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ALiveNF6P-VSTA, BIOS P1.50 04/09/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x01d41000, 0x01d41fff] PGTABLE
[    0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33522000-0x35a88fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA560 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000BFFB0000 000034 (v01 A_M_I  OEMRSDT  04000809 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFB0200 000084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFB0450 004A3F (v01 ASR63  ASR63141 00000141 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFC0000 000040
[    0.000000] ACPI: APIC 0x00000000BFFB0390 000080 (v01 A_M_I  OEMAPIC  04000809 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFB0410 00003C (v01 A_M_I  OEMMCFG  04000809 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFC0040 000060 (v01 A_M_I  AMI_OEM  04000809 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4228MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffaffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048398
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 820146 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e7000-0x000fffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f5d8b000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1046168
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-21-generic root=UUID=3815fdcf-2a77-42de-a460-40fc797edc29 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:00140000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4099420K/4193592K available (7842K kernel code, 759K rwdata, 3116K rodata, 940K init, 800K bss, 94172K reserved, 0K cma-reserved, 3280584K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1b75000 - 0xc1c60000   ( 940 kB)
                     .data : 0xc17a8ed3 - 0xc1b73f80   (3884 kB)
                     .text : 0xc1000000 - 0xc17a8ed3   (7843 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f2438000 soft=f243a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2720.396 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 5440.79 BogoMIPS (lpj=10881584)
[    0.004017] pid_max: default: 32768 minimum: 301
[    0.004028] ACPI: Core revision 20150930
[    0.011196] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011218] Security Framework initialized
[    0.011221] Yama: becoming mindful.
[    0.011243] AppArmor: AppArmor initialized
[    0.011287] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011289] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011528] Initializing cgroup subsys io
[    0.011533] Initializing cgroup subsys memory
[    0.011541] Initializing cgroup subsys devices
[    0.011545] Initializing cgroup subsys freezer
[    0.011548] Initializing cgroup subsys net_cls
[    0.011552] Initializing cgroup subsys perf_event
[    0.011555] Initializing cgroup subsys net_prio
[    0.011559] Initializing cgroup subsys hugetlb
[    0.011563] Initializing cgroup subsys pids
[    0.011583] CPU: Physical Processor ID: 0
[    0.011584] CPU: Processor Core ID: 0
[    0.011587] mce: CPU supports 5 MCE banks
[    0.011594] LVT offset 0 assigned for vector 0xf9
[    0.011597] process: using AMD E400 aware idle routine
[    0.011602] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.011604] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.012090] Freeing SMP alternatives memory: 28K (c1c60000 - c1c67000)
[    0.013852] ftrace: allocating 31158 entries in 61 pages
[    0.020101] smpboot: Max logical packages: 2
[    0.020105] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.020109] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020602] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.064000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x2)
[    0.064000] Performance Events: AMD PMU driver.
[    0.064000] ... version:                0
[    0.064000] ... bit width:              48
[    0.064000] ... generic registers:      4
[    0.064000] ... value mask:             0000ffffffffffff
[    0.064000] ... max period:             00007fffffffffff
[    0.064000] ... fixed-purpose events:   0
[    0.064000] ... event mask:             000000000000000f
[    0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064000] CPU 1 irqstacks, hard=f1d7c000 soft=f1d7e000
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.140033] x86: Booted up 1 node, 2 CPUs
[    0.140036] smpboot: Total of 2 processors activated (10881.64 BogoMIPS)
[    0.140524] devtmpfs: initialized
[    0.140524] evm: security.selinux
[    0.140524] evm: security.SMACK64
[    0.140524] evm: security.SMACK64EXEC
[    0.140524] evm: security.SMACK64TRANSMUTE
[    0.140524] evm: security.SMACK64MMAP
[    0.140524] evm: security.ima
[    0.140524] evm: security.capability
[    0.140524] PM: Registering ACPI NVS region [mem 0xbffc0000-0xbffeffff] (196608 bytes)
[    0.140524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.140524] pinctrl core: initialized pinctrl subsystem
[    0.140524] RTC time: 13:27:37, date: 11/17/16
[    0.140524] NET: Registered protocol family 16
[    0.140566] EISA bus registered
[    0.152006] cpuidle: using governor ladder
[    0.164004] cpuidle: using governor menu
[    0.164013] PCCT header not found.
[    0.164019] node 0 link 0: io port [1000, ffffff]
[    0.164022] TOM: 00000000c0000000 aka 3072M
[    0.164025] node 0 link 0: mmio [e0000000, efffffff]
[    0.164028] node 0 link 0: mmio [a0000, bffff]
[    0.164030] node 0 link 0: mmio [c0000000, fe0bffff]
[    0.164032] TOM2: 0000000140000000 aka 5120M
[    0.164034] bus: [bus 00-07] on node 0 link 0
[    0.164036] bus: 00 [io  0x0000-0xffff]
[    0.164037] bus: 00 [mem 0xc0000000-0xffffffff]
[    0.164039] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.164040] bus: 00 [mem 0x140000000-0xfcffffffff]
[    0.164134] ACPI: bus type PCI registered
[    0.164136] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.164231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.164233] PCI: not using MMCONFIG
[    0.165653] PCI: Using configuration type 1 for base access
[    0.165770] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.165771] mtrr: probably your BIOS does not setup all CPUs.
[    0.165772] mtrr: corrected configuration.
[    0.176139] ACPI: Added _OSI(Module Device)
[    0.176141] ACPI: Added _OSI(Processor Device)
[    0.176143] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.176144] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177878] ACPI: Executed 1 blocks of module-level executable AML code
[    0.179453] ACPI: Interpreter enabled
[    0.179467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.179471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
[    0.179482] ACPI: (supports S0 S1 S4 S5)
[    0.179483] ACPI: Using IOAPIC for interrupt routing
[    0.179516] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.180805] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.180807] PCI: Using MMCONFIG for extended config space
[    0.180811] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.187185] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.187192] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.187392] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.187587] PCI host bridge to bus 0000:00
[    0.187590] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.187592] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.187595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.187597] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.187600] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xff37ffff window]
[    0.187603] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.187622] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[    0.187841] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[    0.187947] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.187962] pci 0000:00:01.1: reg 0x10: [io  0xbc00-0xbc3f]
[    0.187977] pci 0000:00:01.1: reg 0x20: [io  0x5000-0x503f]
[    0.187982] pci 0000:00:01.1: reg 0x24: [io  0x6000-0x603f]
[    0.188008] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.188048] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.188106] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.188203] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.188214] pci 0000:00:02.0: reg 0x10: [mem 0xdceff000-0xdcefffff]
[    0.188245] pci 0000:00:02.0: supports D1 D2
[    0.188247] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188281] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.188338] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.188351] pci 0000:00:02.1: reg 0x10: [mem 0xdcefec00-0xdcefecff]
[    0.188385] pci 0000:00:02.1: supports D1 D2
[    0.188387] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188421] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.188485] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.188543] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.188601] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.188624] pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.188634] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.188636] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.188639] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.188641] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.188724] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.188737] pci 0000:00:07.0: reg 0x10: [mem 0xdcefd000-0xdcefdfff]
[    0.188742] pci 0000:00:07.0: reg 0x14: [io  0xb480-0xb487]
[    0.188768] pci 0000:00:07.0: supports D1 D2
[    0.188770] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188805] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.188862] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.188873] pci 0000:00:08.0: reg 0x10: [io  0xb400-0xb407]
[    0.188877] pci 0000:00:08.0: reg 0x14: [io  0xb080-0xb083]
[    0.188882] pci 0000:00:08.0: reg 0x18: [io  0xb000-0xb007]
[    0.188886] pci 0000:00:08.0: reg 0x1c: [io  0xac00-0xac03]
[    0.188891] pci 0000:00:08.0: reg 0x20: [io  0xa880-0xa88f]
[    0.188895] pci 0000:00:08.0: reg 0x24: [mem 0xdcefc000-0xdcefcfff]
[    0.188982] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.188993] pci 0000:00:08.1: reg 0x10: [io  0xa800-0xa807]
[    0.188998] pci 0000:00:08.1: reg 0x14: [io  0xa480-0xa483]
[    0.189002] pci 0000:00:08.1: reg 0x18: [io  0xa400-0xa407]
[    0.189006] pci 0000:00:08.1: reg 0x1c: [io  0xa080-0xa083]
[    0.189011] pci 0000:00:08.1: reg 0x20: [io  0xa000-0xa00f]
[    0.189015] pci 0000:00:08.1: reg 0x24: [mem 0xdcefb000-0xdcefbfff]
[    0.189105] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.189134] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189170] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.189227] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.189253] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189287] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.189344] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.189369] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189403] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.189467] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.189543] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.189619] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.189695] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.189824] pci 0000:01:08.0: [10b9:5237] type 00 class 0x0c0310
[    0.189840] pci 0000:01:08.0: reg 0x10: [mem 0xdcfff000-0xdcffffff]
[    0.189886] pci 0000:01:08.0: PME# supported from D0 D1 D3hot D3cold
[    0.189947] pci 0000:01:08.1: [10b9:5237] type 00 class 0x0c0310
[    0.189962] pci 0000:01:08.1: reg 0x10: [mem 0xdcffe000-0xdcffefff]
[    0.190008] pci 0000:01:08.1: PME# supported from D0 D1 D3hot D3cold
[    0.190070] pci 0000:01:08.2: [10b9:5237] type 00 class 0x0c0310
[    0.190086] pci 0000:01:08.2: reg 0x10: [mem 0xdcffd000-0xdcffdfff]
[    0.190131] pci 0000:01:08.2: PME# supported from D0 D1 D3hot D3cold
[    0.190195] pci 0000:01:08.3: [10b9:5239] type 00 class 0x0c0320
[    0.190212] pci 0000:01:08.3: reg 0x10: [mem 0xdcffcc00-0xdcffccff]
[    0.190260] pci 0000:01:08.3: PME# supported from D0 D3hot D3cold
[    0.190323] pci 0000:01:08.4: [10b9:5253] type 00 class 0x0c0010
[    0.190338] pci 0000:01:08.4: reg 0x10: [mem 0xdcffc000-0xdcffc7ff]
[    0.190370] pci 0000:01:08.4: reg 0x30: [mem 0xdcfe0000-0xdcfeffff pref]
[    0.190386] pci 0000:01:08.4: supports D1 D2
[    0.190388] pci 0000:01:08.4: PME# supported from D1 D2 D3hot
[    0.190453] pci 0000:01:0a.0: [1102:0002] type 00 class 0x040100
[    0.190469] pci 0000:01:0a.0: reg 0x10: [io  0xcc00-0xcc1f]
[    0.190566] pci 0000:01:0a.1: [1102:7002] type 00 class 0x098000
[    0.190581] pci 0000:01:0a.1: reg 0x10: [io  0xc880-0xc887]
[    0.190693] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.190697] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.190700] pci 0000:00:04.0:   bridge window [mem 0xdcf00000-0xdcffffff]
[    0.190703] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.190705] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.190708] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.190710] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.190712] pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xff37ffff window] (subtractive decode)
[    0.190767] pci 0000:02:00.0: [10de:0295] type 00 class 0x030000
[    0.190782] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.190791] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.190799] pci 0000:02:00.0: reg 0x1c: [mem 0xdd000000-0xddffffff 64bit]
[    0.190804] pci 0000:02:00.0: reg 0x24: [io  0xdc00-0xdc7f]
[    0.190810] pci 0000:02:00.0: reg 0x30: [mem 0xdf7e0000-0xdf7fffff pref]
[    0.190881] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.190887] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.190890] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.190893] pci 0000:00:09.0:   bridge window [mem 0xdd000000-0xdf7fffff]
[    0.190896] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.190960] acpiphp: Slot [1] registered
[    0.190969] pci 0000:00:0b.0: PCI bridge to [bus 03-04]
[    0.190973] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.190975] pci 0000:00:0b.0:   bridge window [mem 0xdf800000-0xdfffffff]
[    0.190979] pci 0000:00:0b.0:   bridge window [mem 0xda000000-0xdbffffff 64bit pref]
[    0.191016] pci 0000:00:0c.0: PCI bridge to [bus 05]
[    0.191027] pci_bus 0000:00: on NUMA node 0
[    0.191772] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.191861] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[    0.191948] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
[    0.192043] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.192134] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.192223] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.192310] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.192397] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.192485] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.192571] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[    0.192658] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[    0.192746] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.192834] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[    0.192922] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.193009] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.193096] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.193183] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.193269] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[    0.193368] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.193435] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.193443] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.193594] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.193594] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.193594] vgaarb: loaded
[    0.193594] vgaarb: bridge control possible 0000:02:00.0
[    0.193594] SCSI subsystem initialized
[    0.193594] libata version 3.00 loaded.
[    0.193594] ACPI: bus type USB registered
[    0.193594] usbcore: registered new interface driver usbfs
[    0.193594] usbcore: registered new interface driver hub
[    0.193594] usbcore: registered new device driver usb
[    0.193594] PCI: Using ACPI for IRQ routing
[    0.200479] PCI: pci_cache_line_size set to 64 bytes
[    0.200524] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.200527] e820: reserve RAM buffer [mem 0xbffb0000-0xbfffffff]
[    0.200699] NetLabel: Initializing
[    0.200701] NetLabel:  domain hash size = 128
[    0.200702] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.200715] NetLabel:  unlabeled traffic allowed by default
[    0.200746] clocksource: Switched to clocksource refined-jiffies
[    0.210389] AppArmor: AppArmor Filesystem Enabled
[    0.210488] pnp: PnP ACPI init
[    0.210580] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.210943] pnp 00:01: [dma 2]
[    0.210999] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.211293] pnp 00:02: [dma 3]
[    0.211408] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.211810] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.211813] system 00:03: [io  0x0800-0x080f] has been reserved
[    0.211816] system 00:03: [io  0x4000-0x407f] could not be reserved
[    0.211819] system 00:03: [io  0x4080-0x40ff] has been reserved
[    0.211821] system 00:03: [io  0x4400-0x447f] has been reserved
[    0.211824] system 00:03: [io  0x4480-0x44ff] has been reserved
[    0.211826] system 00:03: [io  0x4800-0x487f] has been reserved
[    0.211829] system 00:03: [io  0x4880-0x48ff] has been reserved
[    0.211831] system 00:03: [io  0x2000-0x207f] has been reserved
[    0.211834] system 00:03: [io  0x2080-0x20ff] has been reserved
[    0.211838] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.211840] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.211843] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved
[    0.211846] system 00:03: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.211848] system 00:03: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.211851] system 00:03: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.211854] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.211858] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.211966] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.211969] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.211972] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212054] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.212118] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.212319] pnp 00:07: [dma 0 disabled]
[    0.212390] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.212486] system 00:08: [io  0x0290-0x029f] has been reserved
[    0.212490] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212571] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.212575] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212765] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.212768] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.212771] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.212773] system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.212776] system 00:0a: [mem 0xff380000-0xffffffff] could not be reserved
[    0.212779] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.213078] pnp: PnP ACPI: found 11 devices
[    0.213083] PnPBIOS: Disabled by ACPI PNP
[    0.250136] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.250152] clocksource: Switched to clocksource acpi_pm
[    0.250179] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.250182] pci 0000:00:04.0:   bridge window [io  0xc000-0xcfff]
[    0.250186] pci 0000:00:04.0:   bridge window [mem 0xdcf00000-0xdcffffff]
[    0.250192] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.250194] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.250197] pci 0000:00:09.0:   bridge window [mem 0xdd000000-0xdf7fffff]
[    0.250200] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.250204] pci 0000:00:0b.0: PCI bridge to [bus 03-04]
[    0.250206] pci 0000:00:0b.0:   bridge window [io  0xe000-0xefff]
[    0.250209] pci 0000:00:0b.0:   bridge window [mem 0xdf800000-0xdfffffff]
[    0.250212] pci 0000:00:0b.0:   bridge window [mem 0xda000000-0xdbffffff 64bit pref]
[    0.250215] pci 0000:00:0c.0: PCI bridge to [bus 05]
[    0.250221] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.250223] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.250225] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.250228] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.250230] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xff37ffff window]
[    0.250233] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.250235] pci_bus 0000:01: resource 1 [mem 0xdcf00000-0xdcffffff]
[    0.250237] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.250239] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.250242] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.250244] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.250247] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xff37ffff window]
[    0.250249] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.250251] pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdf7fffff]
[    0.250254] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.250256] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.250258] pci_bus 0000:03: resource 1 [mem 0xdf800000-0xdfffffff]
[    0.250261] pci_bus 0000:03: resource 2 [mem 0xda000000-0xdbffffff 64bit pref]
[    0.250297] NET: Registered protocol family 2
[    0.250473] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.250493] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.250524] TCP: Hash tables configured (established 8192 bind 8192)
[    0.250560] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.250569] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.250623] NET: Registered protocol family 1
[    0.324081] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324128] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324172] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324217] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324264] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324314] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324365] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.324444] pci 0000:02:00.0: Video device with shadowed ROM
[    0.324447] PCI: CLS 64 bytes, default 64
[    0.324513] Trying to unpack rootfs image as initramfs...
[    1.069874] Freeing initrd memory: 38300K (f3522000 - f5a89000)
[    1.070034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x273681ee571, max_idle_ns: 440795283157 ns
[    1.070051] Scanning for low memory corruption every 60 seconds
[    1.070507] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.070544] audit: initializing netlink subsys (disabled)
[    1.070565] audit: type=2000 audit(1479389257.067:1): initialized
[    1.070896] Initialise system trusted keyring
[    1.071062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.073669] zbud: loaded
[    1.073809] VFS: Disk quotas dquot_6.6.0
[    1.073866] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.074605] fuse init (API version 7.23)
[    1.074838] Key type big_key registered
[    1.075575] Key type asymmetric registered
[    1.075578] Asymmetric key parser 'x509' registered
[    1.075598] bounce: pool size: 64 pages
[    1.075652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.075701] io scheduler noop registered
[    1.075704] io scheduler deadline registered (default)
[    1.075758] io scheduler cfq registered
[    1.076232] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[    1.076235] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.076237] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[    1.076256] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.076259] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.076276] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.076279] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.076289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.076299] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.076344] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.076345] vesafb: scrolling: redraw
[    1.076347] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.076367] vesafb: framebuffer at 0xc0000000, mapped to 0xf8600000, using 5120k, total 5120k
[    1.076516] Console: switching to colour frame buffer device 160x64
[    1.076551] fb0: VESA VGA frame buffer device
[    1.076676] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.076681] ACPI: Power Button [PWRB]
[    1.076747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.076750] ACPI: Power Button [PWRF]
[    1.077001] GHES: HEST is not enabled!
[    1.077032] isapnp: Scanning for PnP cards...
[    1.077160] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.097549] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.099691] Linux agpgart interface v0.103
[    1.099959] ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 23
[    1.100226] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[    1.100440] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[    1.100666] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[    1.100881] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    1.101095] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    1.101319] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[    1.101631] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[    1.101808] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
[    1.102054] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 16
[    1.113168] brd: module loaded
[    1.115010] loop: module loaded
[    1.115660] libphy: Fixed MDIO Bus: probed
[    1.115664] tun: Universal TUN/TAP device driver, 1.6
[    1.115665] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.115732] PPP generic driver version 2.4.2
[    1.115817] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.115823] ehci-pci: EHCI PCI platform driver
[    1.115926] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.115936] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.115945] ehci-pci 0000:00:02.1: debug port 1
[    1.115978] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.116033] ehci-pci 0000:00:02.1: irq 21, io mem 0xdcefec00
[    1.128027] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.128082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.128085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.128087] usb usb1: Product: EHCI Host Controller
[    1.128089] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    1.128090] usb usb1: SerialNumber: 0000:00:02.1
[    1.128246] hub 1-0:1.0: USB hub found
[    1.128255] hub 1-0:1.0: 10 ports detected
[    1.128618] ehci-pci 0000:01:08.3: EHCI Host Controller
[    1.128624] ehci-pci 0000:01:08.3: new USB bus registered, assigned bus number 2
[    1.128632] ehci-pci 0000:01:08.3: debug port 1
[    1.128673] ehci-pci 0000:01:08.3: irq 18, io mem 0xdcffcc00
[    1.140025] ehci-pci 0000:01:08.3: USB 2.0 started, EHCI 1.00
[    1.140066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.140068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.140070] usb usb2: Product: EHCI Host Controller
[    1.140072] usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    1.140074] usb usb2: SerialNumber: 0000:01:08.3
[    1.140217] hub 2-0:1.0: USB hub found
[    1.140224] hub 2-0:1.0: 6 ports detected
[    1.140466] ehci-platform: EHCI generic platform driver
[    1.140484] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.140488] ohci-pci: OHCI PCI platform driver
[    1.140582] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.140587] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[    1.140622] ohci-pci 0000:00:02.0: irq 22, io mem 0xdceff000
[    1.198065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.198067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.198069] usb usb3: Product: OHCI PCI host controller
[    1.198072] usb usb3: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    1.198073] usb usb3: SerialNumber: 0000:00:02.0
[    1.198255] hub 3-0:1.0: USB hub found
[    1.198264] hub 3-0:1.0: 10 ports detected
[    1.198647] ohci-pci 0000:01:08.0: OHCI PCI host controller
[    1.198654] ohci-pci 0000:01:08.0: new USB bus registered, assigned bus number 4
[    1.198697] ohci-pci 0000:01:08.0: irq 19, io mem 0xdcfff000
[    1.254055] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.254058] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.254060] usb usb4: Product: OHCI PCI host controller
[    1.254062] usb usb4: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    1.254064] usb usb4: SerialNumber: 0000:01:08.0
[    1.254208] hub 4-0:1.0: USB hub found
[    1.254217] hub 4-0:1.0: 2 ports detected
[    1.254395] ohci-pci 0000:01:08.1: OHCI PCI host controller
[    1.254402] ohci-pci 0000:01:08.1: new USB bus registered, assigned bus number 5
[    1.254419] ohci-pci 0000:01:08.1: irq 19, io mem 0xdcffe000
[    1.310055] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.310057] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.310059] usb usb5: Product: OHCI PCI host controller
[    1.310061] usb usb5: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    1.310063] usb usb5: SerialNumber: 0000:01:08.1
[    1.310203] hub 5-0:1.0: USB hub found
[    1.310211] hub 5-0:1.0: 2 ports detected
[    1.310379] ohci-pci 0000:01:08.2: OHCI PCI host controller
[    1.310385] ohci-pci 0000:01:08.2: new USB bus registered, assigned bus number 6
[    1.310400] ohci-pci 0000:01:08.2: irq 19, io mem 0xdcffd000
[    1.366056] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.366058] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.366060] usb usb6: Product: OHCI PCI host controller
[    1.366062] usb usb6: Manufacturer: Linux 4.4.0-21-generic ohci_hcd
[    1.366064] usb usb6: SerialNumber: 0000:01:08.2
[    1.366204] hub 6-0:1.0: USB hub found
[    1.366212] hub 6-0:1.0: 2 ports detected
[    1.366347] ohci-platform: OHCI generic platform driver
[    1.366366] uhci_hcd: USB Universal Host Controller Interface driver
[    1.366473] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.369287] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.369292] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.369389] mousedev: PS/2 mouse device common for all mice
[    1.369544] rtc_cmos 00:00: RTC can wake from S4
[    1.369710] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.369745] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[    1.369757] i2c /dev entries driver
[    1.369845] device-mapper: uevent: version 1.0.3
[    1.369939] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.369972] platform eisa.0: Probing EISA bus 0
[    1.369975] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.369978] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.369980] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.369983] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.369985] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.369987] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.369989] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.369992] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.369994] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.369996] platform eisa.0: EISA: Detected 0 cards
[    1.370011] cpufreq-nforce2: No nForce2 chipset.
[    1.370020] ledtrig-cpu: registered to indicate activity on CPUs
[    1.370392] NET: Registered protocol family 10
[    1.370734] NET: Registered protocol family 17
[    1.370746] Key type dns_resolver registered
[    1.370961] microcode: AMD CPU family 0xf not supported
[    1.370974] Using IPI No-Shortcut mode
[    1.371156] registered taskstats version 1
[    1.371174] Loading compiled-in X.509 certificates
[    1.374023] Loaded X.509 cert 'Build time autogenerated kernel key: 56e7e8a60ca69c909b96ce2276e3015b6f9a0d81'
[    1.374043] zswap: loaded using pool lzo/zbud
[    1.376305] Key type trusted registered
[    1.380442] Key type encrypted registered
[    1.380453] AppArmor: AppArmor sha1 policy hashing enabled
[    1.380457] ima: No TPM chip found, activating TPM-bypass!
[    1.380490] evm: HMAC attrs: 0x1
[    1.380832]   Magic number: 8:612:483
[    1.380955] rtc_cmos 00:00: setting system clock to 2016-11-17 13:27:38 UTC (1479389258)
[    1.381079] powernow_k8: [Firmware Bug]: No compatible ACPI _PSS objects found.
               [Firmware Bug]: First, make sure Cool'N'Quiet is enabled in the BIOS.
               [Firmware Bug]: If that doesn't help, try upgrading your BIOS.
[    1.381103] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
[    1.381112] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.381113] EDD information not available.
[    1.381196] PM: Hibernation image not present or could not be loaded.
[    1.386484] isapnp: No Plug & Play device found
[    1.387002] Freeing unused kernel memory: 940K (c1b75000 - c1c60000)
[    1.387071] Write protecting the kernel text: 7844k
[    1.387103] Write protecting the kernel read-only data: 3124k
[    1.387104] NX-protecting the kernel data: 6492k
[    1.393795] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.403075] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.440053] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    1.459189] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.465015] Floppy drive(s): fd0 is 1.44M
[    1.480190] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.485684] FDC 0 is a post-1991 82077
[    1.503648] [drm] Initialized drm 1.1.0 20060810
[    1.540931] firewire_ohci 0000:01:08.4: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x1, physUB
[    1.545648] wmi: Mapper loaded
[    1.572433] usb 1-2: New USB device found, idVendor=2001, idProduct=f103
[    1.572438] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.572730] hub 1-2:1.0: USB hub found
[    1.572800] hub 1-2:1.0: 7 ports detected
[    1.601795] checking generic (c0000000 500000) vs hw (c0000000 10000000)
[    1.601800] fb: switching to nouveaufb from VESA VGA
[    1.601839] Console: switching to colour dummy device 80x25
[    1.601986] nouveau 0000:02:00.0: NVIDIA G71 (049500a2)
[    1.684051] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    1.760057] usb 6-2: new full-speed USB device number 2 using ohci-pci
[    1.783033] nouveau 0000:02:00.0: bios: version 05.71.22.42.06
[    1.783884] nouveau 0000:02:00.0: fb: 512 MiB GDDR3
[    1.816311] usb 1-3: New USB device found, idVendor=058f, idProduct=6254
[    1.816313] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.816602] hub 1-3:1.0: USB hub found
[    1.816674] hub 1-3:1.0: 4 ports detected
[    1.848558] [TTM] Zone  kernel: Available graphics memory: 429052 kiB
[    1.848560] [TTM] Zone highmem: Available graphics memory: 2069344 kiB
[    1.848561] [TTM] Initializing pool allocator
[    1.848568] [TTM] Initializing DMA pool allocator
[    1.848583] nouveau 0000:02:00.0: DRM: VRAM: 505 MiB
[    1.848585] nouveau 0000:02:00.0: DRM: GART: 512 MiB
[    1.848589] nouveau 0000:02:00.0: DRM: TMDS table version 1.1
[    1.848591] nouveau 0000:02:00.0: DRM: TMDS table script pointers not stubbed
[    1.848593] nouveau 0000:02:00.0: DRM: DCB version 3.0
[    1.848596] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000300 00000028
[    1.848599] nouveau 0000:02:00.0: DRM: DCB outp 01: 03000302 00000000
[    1.848601] nouveau 0000:02:00.0: DRM: DCB outp 02: 04011310 00000028
[    1.848603] nouveau 0000:02:00.0: DRM: DCB outp 03: 0c011312 00000000
[    1.848606] nouveau 0000:02:00.0: DRM: DCB outp 04: 020223f1 00c0c080
[    1.848608] nouveau 0000:02:00.0: DRM: DCB conn 00: 1030
[    1.848610] nouveau 0000:02:00.0: DRM: DCB conn 01: 2130
[    1.848612] nouveau 0000:02:00.0: DRM: DCB conn 02: 0210
[    1.848614] nouveau 0000:02:00.0: DRM: DCB conn 03: 0211
[    1.848616] nouveau 0000:02:00.0: DRM: DCB conn 04: 0213
[    1.850382] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.850384] [drm] Driver supports precise vblank timestamp query.
[    1.850390] nouveau 0000:02:00.0: DRM: 0xC5B5: Parsing digital output script table
[    1.888028] usb 1-2.1: new low-speed USB device number 4 using ehci-pci
[    1.900018] nouveau 0000:02:00.0: DRM: 0xC605: Parsing digital output script table
[    1.954210] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[    1.954220] nouveau 0000:02:00.0: DRM: Setting dpms mode 3 on TV encoder (output 4)
[    1.984430] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c05a
[    1.984433] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.984436] usb 1-2.1: Product: USB Optical Mouse
[    1.984437] usb 1-2.1: Manufacturer: Logitech
[    2.003044] usb 6-2: New USB device found, idVendor=058f, idProduct=9360
[    2.003047] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.003049] usb 6-2: Product: USB Reader
[    2.003051] usb 6-2: Manufacturer:  
[    2.003053] usb 6-2: SerialNumber: 2004888
[    2.004772] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:88:3e:33
[    2.004776] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[    2.004814] pata_amd 0000:00:06.0: version 0.4.1
[    2.005788] forcedeth 0000:00:07.0 enp0s7: renamed from eth0
[    2.005998] scsi host0: pata_amd
[    2.006135] scsi host1: pata_amd
[    2.006199] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.006201] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.006370] sata_nv 0000:00:08.0: version 3.5
[    2.006984] scsi host2: sata_nv
[    2.008706] scsi host3: sata_nv
[    2.008790] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 23
[    2.008793] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 23
[    2.009876] scsi host4: sata_nv
[    2.010091] scsi host5: sata_nv
[    2.010160] ata5: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 22
[    2.010162] ata6: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 22
[    2.015350] usb-storage 6-2:1.0: USB Mass Storage device detected
[    2.015591] scsi host6: usb-storage 6-2:1.0
[    2.015704] usbcore: registered new interface driver usb-storage
[    2.023196] usbcore: registered new interface driver uas
[    2.040124] firewire_core 0000:01:08.4: created device fw0: GUID 0090e63900000609, S400
[    2.040292] nouveau 0000:02:00.0: DRM: allocated 1680x1050 fb: 0x9000, bo f50b5400
[    2.040390] fbcon: nouveaufb (fb0) is primary device
[    2.040489] Console: switching to colour frame buffer device 210x65
[    2.040535] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[    2.056036] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[    2.108027] usb 1-3.1: new high-speed USB device number 5 using ehci-pci
[    2.127322] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[    2.344487] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
[    2.344491] ata1.00: 390721968 sectors, multi 16: LBA48 
[    2.344684] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    2.344686] ata1.01: 156250000 sectors, multi 16: LBA 
[    2.344693] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c70000) ACPI=0x3f01f (20:15:0x15)
[    2.344697] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc6c70000) ACPI=0x7f01f (20:15:0x15)
[    2.360406] ata1.00: configured for UDMA/100
[    2.376388] ata1.01: configured for UDMA/133
[    2.376620] scsi 0:0:0:0: Direct-Access     ATA      ST3200822A       3.01 PQ: 0 ANSI: 5
[    2.376947] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.377058] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    2.377094] sd 0:0:0:0: [sda] Write Protect is off
[    2.377097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.377113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.386999]  sda: sda1 sda2
[    2.387065] scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0   1BW0 PQ: 0 ANSI: 5
[    2.387361] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.387459] ata2: port disabled--ignoring
[    2.387496] sd 0:0:1:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.387553] sd 0:0:1:0: [sdb] Write Protect is off
[    2.387556] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.387580] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.394792]  sdb: sdb1
[    2.394868] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.395068] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.476054] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.476057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.484171] ata3.00: ATAPI: Optiarc DVD RW AD-7200S, 1.B0, max UDMA/100
[    2.484174] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[    2.500173] ata3.00: configured for UDMA/100
[    2.500175] ata5.00: configured for UDMA/100
[    2.502431] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.B0 PQ: 0 ANSI: 5
[    2.509825] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.509827] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.509983] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.510056] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.961432] usb 1-3.1: New USB device found, idVendor=0bda, idProduct=0151
[    2.961436] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.961438] usb 1-3.1: Product: USB2.0-CRW
[    2.961440] usb 1-3.1: Manufacturer: Generic
[    2.961442] usb 1-3.1: SerialNumber: 20060413092100000
[    2.962956] usb-storage 1-3.1:1.0: USB Mass Storage device detected
[    2.963147] scsi host7: usb-storage 1-3.1:1.0
[    2.976050] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.984204] ata4.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
[    2.984208] ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.992301] ata4.00: configured for UDMA/133
[    2.992490] scsi 3:0:0:0: Direct-Access     ATA      Samsung SSD 840  5B0Q PQ: 0 ANSI: 5
[    2.992802] ata4.00: Enabling discard_zeroes_data
[    2.992820] sd 3:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.992894] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    2.992899] sd 3:0:0:0: [sdc] Write Protect is off
[    2.992902] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.992928] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.993118] ata4.00: Enabling discard_zeroes_data
[    2.993689]  sdc: sdc1 sdc2 < sdc5 >
[    2.993992] ata4.00: Enabling discard_zeroes_data
[    2.994098] sd 3:0:0:0: [sdc] Attached SCSI disk
[    2.996720] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN02 PQ: 0 ANSI: 5
[    3.019821] sr 4:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.020023] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    3.020103] sr 4:0:0:0: Attached scsi generic sg4 type 5
[    3.023066] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.024048] usb 1-2.5: new low-speed USB device number 6 using ehci-pci
[    3.030056] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    3.037054] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    3.044062] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    3.044441] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    3.044660] sd 6:0:0:1: Attached scsi generic sg6 type 0
[    3.044879] sd 6:0:0:2: Attached scsi generic sg7 type 0
[    3.045097] sd 6:0:0:3: Attached scsi generic sg8 type 0
[    3.140557] usb 1-2.5: New USB device found, idVendor=062a, idProduct=0102
[    3.140562] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.140564] usb 1-2.5: Product: Wireless Keyboard & Mouse
[    3.140566] usb 1-2.5: Manufacturer: MOSART Semi.
[    3.149592] hidraw: raw HID events driver (C) Jiri Kosina
[    3.169224] usbcore: registered new interface driver usbhid
[    3.169228] usbhid: USB HID core driver
[    3.174121] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C05A.0001/input/input6
[    3.174618] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.1-2.1/input0
[    3.175227] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.5/1-2.5:1.0/0003:062A:0102.0002/input/input7
[    3.228208] hid-generic 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.1-2.5/input0
[    3.229282] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.5/1-2.5:1.1/0003:062A:0102.0003/input/input8
[    3.284563] hid-generic 0003:062A:0102.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.1-2.5/input1
[    3.488055] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.496266] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    3.496271] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.504245] ata6.00: configured for UDMA/133
[    3.504434] scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    3.504779] sd 5:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.504782] sd 5:0:0:0: [sdh] 4096-byte physical blocks
[    3.504838] sd 5:0:0:0: [sdh] Write Protect is off
[    3.504841] sd 5:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[    3.504866] sd 5:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.505202] sd 5:0:0:0: Attached scsi generic sg9 type 0
[    3.524595]  sdh: sdh1
[    3.524899] sd 5:0:0:0: [sdh] Attached SCSI disk
[    3.547057] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[    3.558059] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    3.569056] sd 6:0:0:1: [sde] Attached SCSI removable disk
[    3.580060] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[    3.717667] random: nonblocking pool is initialized
[    3.966586] scsi 7:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    3.972963] scsi 7:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    3.979318] scsi 7:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    3.985733] scsi 7:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    3.986129] sd 7:0:0:0: Attached scsi generic sg10 type 0
[    3.986347] sd 7:0:0:1: Attached scsi generic sg11 type 0
[    3.986557] sd 7:0:0:2: Attached scsi generic sg12 type 0
[    3.986767] sd 7:0:0:3: Attached scsi generic sg13 type 0
[    4.010446] sd 7:0:0:0: [sdi] Attached SCSI removable disk
[    4.027077] sd 7:0:0:1: [sdj] Attached SCSI removable disk
[    4.027945] sd 7:0:0:2: [sdk] Attached SCSI removable disk
[    4.029696] sd 7:0:0:3: [sdl] Attached SCSI removable disk
[    4.321363] EDID block is all zeroes
[    4.321370] nouveau 0000:02:00.0: DVI-I-2: EDID block 0 invalid.
[    4.321373] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[    4.708015] raid6: mmxx1    gen()  2220 MB/s
[    4.776022] raid6: mmxx2    gen()  4011 MB/s
[    4.844021] raid6: sse1x1   gen()  2305 MB/s
[    4.912028] raid6: sse1x2   gen()  3583 MB/s
[    4.980020] raid6: sse2x1   gen()  3837 MB/s
[    5.048020] raid6: sse2x1   xor()  2998 MB/s
[    5.116013] raid6: sse2x2   gen()  5026 MB/s
[    5.184019] raid6: sse2x2   xor()  3241 MB/s
[    5.184021] raid6: using algorithm sse2x2 gen() 5026 MB/s
[    5.184022] raid6: .... xor() 3241 MB/s, rmw enabled
[    5.184023] raid6: using intx1 recovery algorithm
[    5.187808] xor: measuring software checksum speed
[    5.224015]    pIII_sse  :  7486.000 MB/sec
[    5.264014]    prefetch64-sse:  7843.000 MB/sec
[    5.264016] xor: using function: prefetch64-sse (7843.000 MB/sec)
[    5.307861] Btrfs loaded
[   17.892511] blk_update_request: I/O error, dev fd0, sector 0
[   17.892516] floppy: error -5 while reading block 0
[   23.497550] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   23.610852] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   23.611011] systemd[1]: Detected architecture x86.
[   23.611269] systemd[1]: Set hostname to <Petit-noir-costaud-64X2>.
[   23.740615] systemd[1]: Listening on udev Control Socket.
[   23.740871] systemd[1]: Created slice User and Session Slice.
[   23.740898] systemd[1]: Reached target Encrypted Volumes.
[   23.740924] systemd[1]: Reached target Remote File Systems (Pre).
[   23.741036] systemd[1]: Listening on Journal Audit Socket.
[   23.741064] systemd[1]: Reached target Remote File Systems.
[   23.741091] systemd[1]: Reached target User and Group Name Lookups.
[   23.741141] systemd[1]: Listening on Syslog Socket.
[   23.741183] systemd[1]: Listening on udev Kernel Socket.
[   23.741247] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   23.741296] systemd[1]: Listening on Journal Socket (/dev/log).
[   23.741348] systemd[1]: Listening on LVM2 poll daemon socket.
[   23.741404] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   23.741451] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   23.741490] systemd[1]: Listening on fsck to fsckd communication Socket.
[   23.741534] systemd[1]: Listening on LVM2 metadata daemon socket.
[   23.741671] systemd[1]: Created slice System Slice.
[   23.741709] systemd[1]: Reached target Slices.
[   23.741781] systemd[1]: Listening on Journal Socket.
[   23.756231] systemd[1]: Starting Set console keymap...
[   23.757245] systemd[1]: Mounting POSIX Message Queue File System...
[   23.762191] systemd[1]: Starting Load Kernel Modules...
[   23.766147] systemd[1]: Starting Uncomplicated firewall...
[   23.768260] systemd[1]: Mounting Debug File System...
[   23.769111] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   23.769902] systemd[1]: Mounting Huge Pages File System...
[   23.770694] systemd[1]: Started Braille Device Support.
[   23.776503] systemd[1]: Starting Journal Service...
[   23.779401] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   23.781837] systemd[1]: Started Read required files in advance.
[   23.789848] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   23.797604] systemd[1]: Mounted POSIX Message Queue File System.
[   23.799158] systemd[1]: Started Uncomplicated firewall.
[   23.800250] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   23.805483] systemd[1]: Mounted Huge Pages File System.
[   23.807566] systemd[1]: Mounted Debug File System.
[   23.810108] lp: driver loaded but no devices found
[   23.823294] ppdev: user-space parallel port driver
[   23.832705] parport_pc 00:02: reported by Plug and Play ACPI
[   23.832777] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   23.920753] systemd[1]: Started LVM2 metadata daemon.
[   23.922451] systemd[1]: Starting Create Static Device Nodes in /dev...
[   23.923267] systemd[1]: Started Set console keymap.
[   23.928204] lp0: using parport0 (interrupt-driven).
[   23.931040] systemd[1]: Started Load Kernel Modules.
[   23.964202] systemd[1]: Mounting FUSE Control File System...
[   23.965045] systemd[1]: Starting Apply Kernel Variables...
[   23.967111] systemd[1]: Started Create Static Device Nodes in /dev.
[   23.968678] systemd[1]: Started Journal Service.
[   24.107023] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   24.222744] systemd-journald[364]: Received request to flush runtime journal from PID 1
[   24.927966] i2c i2c-3: nForce2 SMBus adapter at 0x5000
[   24.928324] i2c i2c-4: nForce2 SMBus adapter at 0x6000
[   25.116034] gameport gameport0: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xc880, speed 1111kHz
[   25.649145] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.732686] EDAC MC: Ver: 3.0.0
[   25.736582] MCE: In-kernel MCE decoding enabled.
[   25.742622] AMD64 EDAC driver v3.4.0
[   25.742738] EDAC amd64: DRAM ECC disabled.
[   25.742743] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   25.745746] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   25.897476] kvm: Nested Virtualization enabled
[  113.852567] cgroup: new mount options do not match the existing superblock, will be ignored
[  114.637831] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  114.658206] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[  114.659078] forcedeth 0000:00:07.0 enp0s7: MSI enabled
[  115.013690] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  115.141626] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  127.411933] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  128.582107] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  128.868393] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  129.025845] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
[  150.010197] nouveau 0000:02:00.0: DRM: DDC responded, but no EDID for DVI-I-2
paco@Petit-noir-costaud-64X2 ~ $ 

Suite

Code : Tout sélectionner

paco@Petit-noir-costaud-64X2 ~ $ systemd-analyze
Startup finished in 23.580s (kernel) + 3min 494ms (userspace) = 3min 24.074s
paco@Petit-noir-costaud-64X2 ~ $ 

Suite

Code : Tout sélectionner

paco@Petit-noir-costaud-64X2 ~ $ systemd-analyze blame
         10.903s apt-daily.service
          1.943s dev-sdc1.device
          1.248s lvm2-monitor.service
           562ms accounts-daemon.service
           485ms ModemManager.service
           422ms systemd-logind.service
           358ms NetworkManager.service
           357ms avahi-daemon.service
           304ms loadcpufreq.service
           299ms irqbalance.service
           290ms udisks2.service
           268ms grub-common.service
           265ms virtualbox-guest-utils.service
           225ms hddtemp.service
           223ms speech-dispatcher.service
           206ms ondemand.service
           192ms systemd-journald.service
           190ms upower.service
           188ms console-setup.service
           179ms console-kit-log-system-start.service
           170ms systemd-udev-trigger.service
           168ms systemd-modules-load.service
           168ms rsyslog.service
           167ms keyboard-setup.service
           159ms plymouth-quit.service
           159ms plymouth-quit-wait.service
           152ms cpufrequtils.service
           144ms colord.service
           138ms networking.service
           130ms gpu-manager.service
           112ms polkitd.service
           110ms systemd-user-sessions.service
           109ms systemd-journal-flush.service
           108ms systemd-udevd.service
            97ms thermald.service
            95ms pppd-dns.service
            85ms user@1000.service
            75ms plymouth-start.service
            70ms rc-local.service
            68ms openvpn.service
            62ms systemd-tmpfiles-setup.service
            62ms binfmt-support.service
            61ms systemd-hostnamed.service
            56ms alsa-restore.service
            48ms systemd-update-utmp.service
            46ms proc-sys-fs-binfmt_misc.mount
            44ms systemd-tmpfiles-setup-dev.service
            41ms systemd-update-utmp-runlevel.service
            40ms dev-mqueue.mount
            39ms sys-kernel-debug.mount
            36ms lm-sensors.service
            35ms dev-hugepages.mount
            33ms ntp.service
            33ms ufw.service
            24ms dns-clean.service
            24ms systemd-sysctl.service
            20ms kmod-static-nodes.service
            19ms plymouth-read-write.service
            16ms console-kit-daemon.service
            15ms resolvconf.service
            14ms systemd-remount-fs.service
            12ms systemd-tmpfiles-clean.service
            12ms sys-fs-fuse-connections.mount
            11ms setvtrgb.service
            10ms systemd-random-seed.service
             7ms ureadahead-stop.service
             6ms rtkit-daemon.service
Lines 5-67/67 (END)

[AngeDesOmbres]

effectivement tu as un gros souci sur le boot 3minutes sur un ssd c'est plus que énorme :/
Malheureusement moi je ne suis pas un "doc" mais si je t'ai demandé ces commandes c'est pour les docs ai déjà un aperçu et pourront construire leur réponse pour régler le problème
T'en fait pas ils passeront bientôt par ici

Bien à toi.

Bye.

[paco]

Merci.
Ben ça ! Ta réponse a été plus rapide que mon démarrage.
C'est ce qu'on appelle de la réactivité. Chapeau !

[mpat]

tu peux déjà gagner pas mal e temps ici 10.903s apt-daily.service c'est une recherche des mises a jours, qui n'est pas obligatoire en continu.

tu peux régler deux choses comme ci dessous.





si tu n'as pas de modem interne, tu peux aussi désinstaller, sauf si tu compte te servir d'un phone comme modem. 485ms ModemManager.service

Code : Tout sélectionner

sudo apt-get purge modemmanager 

[paco]

Merci mpat
Ça, c'est quoi ?

10.903s apt-daily.service

On s'en sert comment ?

Pour le reste, c'est fait ! Je redémarre et viens au rapport.

Quelques instants plus tard...

Ben ça n'a pas l'air d'avoir changé grand chose. J'ai chronométré depuis l'appui sur on, jusqu'à la boîte du mot de passe, en tout, il s'est passé 2 minutes et 15 secondes. Il y a un léger mieux.
Je vais virer l’économiseur d'écran. Ça me permettra en même temps, de voir si ça ne serait pas lui qui me fait planter cinnamon.

Après nouvelles modifs et redémarrage...

Bof ! Ça n'a absolument rien changé. Pas une seconde de mieux.

Comme dehors la météo n'est pas terrible, je ne peux pas m'occuper du jardin. J'en profite pour réinstaller Blinder.

Ben c'est bizarre, lorsque j'installe Blender avec le gestionnaire de logiciels, j'ai un message qui me dit que le paquet n'a pas pu être installé parcequ'une autre application utilise APT, (dpkg). Du coup je l'ai installé avec synaptic, et la, tout va bien.

[yoyo.thebest]

Bonsoir
J'avais un pb similaire.
La mise à jour du noyau à régler définitivement le pb
Je suis actuellement en 4.40.47 sans pb
La preuve :

Code : Tout sélectionner

systemd-analyze
Startup finished in 16.620s (firmware) + 3.900s (loader) + 2.358s (kernel) + 9.175s (userspace) = 32.054s

[roromint]

salut
ben j'ai 4.4.0.47 sur ma tour maximusg5
et un portable 30 seconde
et remise ubuntu mate 16.0.4.4 màj update egale 30 seconde

Code : Tout sélectionner

rodrigue7000@rodrigue7000-mint-maximusg5 ~ $ systemd-analyze
Startup finished in 15.563s (kernel) + 1min 4.145s (userspace) = 1min 19.708s

sniff

[paco]

Bonsoir tous !
Donc on peut régler le problème en faisant une mise à jour du noyau, ce qui me met dans une joie extrême. Moi, à part les noyaux de pêches, cerises, abricots et autres fruits, les noyaux de mint... Je vais chercher comment on greffe un noyau de prune sur un pied de menthe. Ça ne doit pas être évident.