Page 1 sur 1

Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : dim. 15 janv. 2023 21:10
par Berni18
Bonjour,
ci-joint un des nombreux relevés de plantage :
https://termbin.com/d7o9
Merci pour votre aide

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : dim. 15 janv. 2023 23:36
par Berni18
Instabilité Xfce : tableau de bord non fonctionnel, disparition de plank et Thunar indisponible.
Le problème est récurant à chaque démarrage. Le PC devient inutilisable. Cela peut-il venir du disque SSD ?

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : lun. 16 janv. 2023 05:22
par tyrry
Slt,
c'est quel pc de ta signature ?
Est-ce une nouvelle installe ?
Si oui as tu vérifié l'iso ?
Est-ce suite à un mise à jour ?
Etc etc ......
Il faudrait détaillé un peu quand même ;)
@+

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : lun. 16 janv. 2023 09:56
par Berni18
Il s’agit du SAMSUNG Notebook NP400B5B.
sudo dmesg | egrep 'fail|warn|err|firm'

Code : Tout sélectionner

[    0.071356] ACPI: IRQ0 used by override.
[    0.071358] ACPI: IRQ9 used by override.
[    0.155589] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.172119] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.199369] ACPI: EC: interrupt blocked
[    0.424026] ACPI: Using IOAPIC for interrupt routing
[    0.438329] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.446939] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
[    0.447052] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
[    0.447163] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
[    0.447273] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.447383] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[    0.447492] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
[    0.447603] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 *7 10 11)
[    0.447713] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11)
[    0.448674] ACPI: EC: interrupt unblocked
[    0.809767] fbcon: Deferring console take-over
[    1.307067] sdhci: Copyright(c) Pierre Ossman
[    1.335260] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.336628] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.248120] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.854779] random: 78 urandom warning(s) missed due to ratelimiting
[    7.405350] wl: module verification failed: signature and/or required key missing - tainting kernel
[   16.338896] ata1.00: READ LOG DMA EXT failed, trying PIO
[   16.340209] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   16.340232] ata1.00: error: { UNC }
[   16.345591] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
[   16.345605] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[   16.460262] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   16.460285] ata1.00: error: { UNC }
[   16.466142] sd 0:0:0:0: [sda] tag#2 Add. Sense: Unrecovered read error - auto reallocate failed
[   16.466156] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   16.576089] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   16.576111] ata1.00: error: { UNC }
[   16.581980] sd 0:0:0:0: [sda] tag#22 Add. Sense: Unrecovered read error - auto reallocate failed
[   16.581992] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   18.588262] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   18.588287] ata1.00: error: { UNC }
[   18.593896] sd 0:0:0:0: [sda] tag#7 Add. Sense: Unrecovered read error - auto reallocate failed
[   18.593911] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   18.932101] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:64:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   18.932125] ata1.00: error: { UNC }
[   18.938078] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
[   18.938092] blk_update_request: I/O error, dev sda, sector 13684836 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   19.020120] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:64:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   19.020143] ata1.00: error: { UNC }
[   19.025983] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed
[   19.025997] blk_update_request: I/O error, dev sda, sector 13684836 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  607.386985] wlp2s0 Scan_results error (-22)
[  607.959322] ACPI: EC: interrupt blocked
[  608.004924] ACPI: EC: interrupt unblocked
df -h

Code : Tout sélectionner

Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
udev               3,8G       0  3,8G   0% /dev
tmpfs              787M    1,6M  785M   1% /run
/dev/sda1           31G     13G   18G  42% /
tmpfs              3,9G       0  3,9G   0% /dev/shm
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs              3,9G       0  3,9G   0% /sys/fs/cgroup
tmpfs              500M     40M  461M   8% /tmp
/dev/sda2          146G    2,9G  136G   3% /home
/dev/sda3          727G    361G  330G  53% /media/DATAS
tmpfs              787M     16K  787M   1% /run/user/1000
mv ~/.config/xfce4 ~/.config/xfce4-bak
redémarrage du PC : celui-ci semble fonctionner, mais toujours un relevé de plantage, voir ci-dessous :
https://termbin.com/t5r6

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : lun. 16 janv. 2023 11:49
par Berni18
La stabilité est temporaire. Après plusieurs redémarrage, on se retrouve avec le même problème.
Je pense à une défaillance du disque SSD.

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : lun. 16 janv. 2023 13:54
par Berni18
Ferme tu bien tes sessions ? oui, je reboot complètement le PC !
sudo smartctl -a /dev/sda

Code : Tout sélectionner

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-137-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Marvell based SanDisk SSDs
Device Model:     SanDisk SSD PLUS 1000GB
Serial Number:    203817A00594
LU WWN Device Id: 5 001b44 8bbcc0220
Firmware Version: UH5100RL
User Capacity:    1 000 207 286 272 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jan 16 13:56:14 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 182) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       489
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1272
165 Total_Write/Erase_Count 0x0032   100   100   000    Old_age   Always       -       249
166 Min_W/E_Cycle           0x0032   100   100   ---    Old_age   Always       -       1
167 Min_Bad_Block/Die       0x0032   100   100   ---    Old_age   Always       -       0
168 Maximum_Erase_Cycle     0x0032   100   100   ---    Old_age   Always       -       3
169 Total_Bad_Block         0x0032   100   100   ---    Old_age   Always       -       909
170 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
173 Avg_Write/Erase_Count   0x0032   100   100   000    Old_age   Always       -       1
174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       50
184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       402
188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   077   062   000    Old_age   Always       -       23 (Min/Max 9/62)
199 SATA_CRC_Error          0x0032   100   100   ---    Old_age   Always       -       0
230 Perc_Write/Erase_Count  0x0032   100   100   000    Old_age   Always       -       71 20 71
232 Perc_Avail_Resrvd_Space 0x0033   100   100   005    Pre-fail  Always       -       100
233 Total_NAND_Writes_GiB   0x0032   100   100   ---    Old_age   Always       -       1161
234 Perc_Write/Erase_Ct_BC  0x0032   100   100   000    Old_age   Always       -       3894
241 Total_Writes_GiB        0x0030   100   100   000    Old_age   Offline      -       1598
242 Total_Reads_GiB         0x0030   100   100   000    Old_age   Offline      -       1180
244 Thermal_Throttle        0x0032   000   100   ---    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported
Le disque semble correct.

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : mar. 17 janv. 2023 09:43
par Berni18
ls -l ~/.session

Code : Tout sélectionner

ls: impossible d'accéder à '/home/bcaulier/.session': Aucun fichier ou dossier de ce type
ls -l ~/.Xauthority

Code : Tout sélectionner

-rw------- 1 bcaulier bcaulier 115 janv. 17 09:35 /home/bcaulier/.Xauthority
Mise a jour sur le dernier noyau de Linux Mint 20.3
uname -a

Code : Tout sélectionner

Linux SAMSUNG-400B4B 5.4.0-137-generic #154-Ubuntu SMP Thu Jan 5 17:03:22 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
dmesg --level err

Code : Tout sélectionner

[   17.076986] ata1.00: exception Emask 0x0 SAct 0x60 SErr 0x40000 action 0x0
[   17.076994] ata1.00: irq_stat 0x40000008
[   17.077001] ata1: SError: { CommWake }
[   17.077007] ata1.00: failed command: READ FPDMA QUEUED
[   17.077021] ata1.00: cmd 60/00:28:38:d0:d0/01:00:00:00:00/40 tag 5 ncq dma 131072 in
                        res 41/40:00:60:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   17.077026] ata1.00: status: { DRDY ERR }
[   17.077030] ata1.00: error: { UNC }
[   17.085106] blk_update_request: I/O error, dev sda, sector 13684832 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[   17.168651] ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
[   17.168659] ata1.00: irq_stat 0x40000008
[   17.168665] ata1.00: failed command: READ FPDMA QUEUED
[   17.168679] ata1.00: cmd 60/08:18:68:d0:d0/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   17.168684] ata1.00: status: { DRDY ERR }
[   17.168688] ata1.00: error: { UNC }
[   17.175326] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   17.252670] ata1.00: exception Emask 0x0 SAct 0x800010 SErr 0x0 action 0x0
[   17.252677] ata1.00: irq_stat 0x40000008
[   17.252683] ata1.00: failed command: READ FPDMA QUEUED
[   17.252696] ata1.00: cmd 60/08:b8:68:d0:d0/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   17.252701] ata1.00: status: { DRDY ERR }
[   17.252705] ata1.00: error: { UNC }
[   17.259279] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   19.140619] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x0
[   19.140624] ata1.00: irq_stat 0x40000008
[   19.140627] ata1: SError: { CommWake }
[   19.140630] ata1.00: failed command: READ FPDMA QUEUED
[   19.140636] ata1.00: cmd 60/08:00:68:d0:d0/00:00:00:00:00/40 tag 0 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   19.140638] ata1.00: status: { DRDY ERR }
[   19.140640] ata1.00: error: { UNC }
[   19.147068] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   19.224660] ata1.00: exception Emask 0x0 SAct 0x1800004 SErr 0x0 action 0x0
[   19.224669] ata1.00: irq_stat 0x40000008
[   19.224677] ata1.00: failed command: READ FPDMA QUEUED
[   19.224690] ata1.00: cmd 60/08:b8:68:d0:d0/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   19.224696] ata1.00: status: { DRDY ERR }
[   19.224700] ata1.00: error: { UNC }
[   19.231290] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   21.432479] ata1.00: exception Emask 0x0 SAct 0x1e2000 SErr 0x40000 action 0x0
[   21.432484] ata1.00: irq_stat 0x40000008
[   21.432487] ata1: SError: { CommWake }
[   21.432490] ata1.00: failed command: READ FPDMA QUEUED
[   21.432496] ata1.00: cmd 60/08:88:68:d0:d0/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   21.432498] ata1.00: status: { DRDY ERR }
[   21.432500] ata1.00: error: { UNC }
[   21.439057] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   21.516454] ata1.00: exception Emask 0x0 SAct 0xf80000 SErr 0x0 action 0x0
[   21.516459] ata1.00: irq_stat 0x40000008
[   21.516462] ata1.00: failed command: READ FPDMA QUEUED
[   21.516468] ata1.00: cmd 60/08:98:68:d0:d0/00:00:00:00:00/40 tag 19 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   21.516470] ata1.00: status: { DRDY ERR }
[   21.516472] ata1.00: error: { UNC }
[   21.522895] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   21.832612] ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x40000 action 0x0
[   21.832616] ata1.00: irq_stat 0x40000008
[   21.832619] ata1: SError: { CommWake }
[   21.832622] ata1.00: failed command: READ FPDMA QUEUED
[   21.832628] ata1.00: cmd 60/08:18:68:d0:d0/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   21.832630] ata1.00: status: { DRDY ERR }
[   21.832632] ata1.00: error: { UNC }
[   21.839004] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.180396] ata1.00: exception Emask 0x1 SAct 0x60000001 SErr 0x0 action 0x6 frozen
[   52.180406] ata1.00: irq_stat 0x40000008
[   52.180414] ata1.00: failed command: READ FPDMA QUEUED
[   52.180428] ata1.00: cmd 60/30:00:48:c6:4f/00:00:00:00:00/40 tag 0 ncq dma 24576 in
                        res 40/00:00:68:d0:d0/00:00:00:00:00/00 Emask 0x5 (timeout)
[   52.180433] ata1.00: status: { DRDY }
[   52.180439] ata1.00: failed command: READ FPDMA QUEUED
[   52.180450] ata1.00: cmd 60/08:e8:68:d0:d0/00:00:00:00:00/40 tag 29 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[   52.180455] ata1.00: status: { DRDY }
[   52.180459] ata1.00: failed command: READ FPDMA QUEUED
[   52.180470] ata1.00: cmd 60/08:f0:b0:d5:06/00:00:01:00:00/40 tag 30 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[   52.180474] ata1.00: status: { DRDY }
[   52.507639] blk_update_request: I/O error, dev sda, sector 5228104 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[   52.507701] blk_update_request: I/O error, dev sda, sector 17225136 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   52.606960] ata1.00: exception Emask 0x0 SAct 0x8001c023 SErr 0x0 action 0x0
[   52.606970] ata1.00: irq_stat 0x40000008
[   52.606977] ata1.00: failed command: READ FPDMA QUEUED
[   52.606991] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.606997] ata1.00: status: { DRDY ERR }
[   52.607001] ata1.00: error: { UNC }
[   52.613377] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.701567] ata1.00: exception Emask 0x0 SAct 0x607e0000 SErr 0x0 action 0x0
[   52.701576] ata1.00: irq_stat 0x40000008
[   52.701584] ata1.00: failed command: READ FPDMA QUEUED
[   52.701597] ata1.00: cmd 60/08:88:68:d0:d0/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.701602] ata1.00: status: { DRDY ERR }
[   52.701607] ata1.00: error: { UNC }
[   52.707969] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.796137] ata1.00: exception Emask 0x0 SAct 0x80000000 SErr 0x0 action 0x0
[   52.796147] ata1.00: irq_stat 0x40000008
[   52.796155] ata1.00: failed command: READ FPDMA QUEUED
[   52.796169] ata1.00: cmd 60/08:f8:68:d0:d0/00:00:00:00:00/40 tag 31 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.796175] ata1.00: status: { DRDY ERR }
[   52.796179] ata1.00: error: { UNC }
[   52.802644] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.882703] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   52.882712] ata1.00: irq_stat 0x40000008
[   52.882718] ata1.00: failed command: READ FPDMA QUEUED
[   52.882731] ata1.00: cmd 60/08:00:68:d0:d0/00:00:00:00:00/40 tag 0 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.882737] ata1.00: status: { DRDY ERR }
[   52.882741] ata1.00: error: { UNC }
[   52.889114] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.969566] ata1.00: exception Emask 0x0 SAct 0x18006 SErr 0x0 action 0x0
[   52.969576] ata1.00: irq_stat 0x40000008
[   52.969584] ata1.00: failed command: READ FPDMA QUEUED
[   52.969597] ata1.00: cmd 60/08:78:68:d0:d0/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.969602] ata1.00: status: { DRDY ERR }
[   52.969607] ata1.00: error: { UNC }
[   52.975978] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   53.072267] ata1.00: exception Emask 0x0 SAct 0x10184400 SErr 0x0 action 0x0
[   53.072271] ata1.00: irq_stat 0x40000008
[   53.072274] ata1.00: failed command: READ FPDMA QUEUED
[   53.072280] ata1.00: cmd 60/08:50:68:d0:d0/00:00:00:00:00/40 tag 10 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   53.072282] ata1.00: status: { DRDY ERR }
[   53.072284] ata1.00: error: { UNC }
[   53.078719] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   53.174540] ata1.00: exception Emask 0x0 SAct 0x9c07f0 SErr 0x0 action 0x0
[   53.174550] ata1.00: irq_stat 0x40000008
[   53.174558] ata1.00: failed command: READ FPDMA QUEUED
[   53.174572] ata1.00: cmd 60/08:b8:68:d0:d0/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   53.174577] ata1.00: status: { DRDY ERR }
[   53.174582] ata1.00: error: { UNC }
[   53.180999] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   54.947910] ata1.00: exception Emask 0x0 SAct 0x30000 SErr 0x40000 action 0x0
[   54.947915] ata1.00: irq_stat 0x40000008
[   54.947918] ata1: SError: { CommWake }
[   54.947921] ata1.00: failed command: READ FPDMA QUEUED
[   54.947926] ata1.00: cmd 60/08:80:68:d0:d0/00:00:00:00:00/40 tag 16 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   54.947929] ata1.00: status: { DRDY ERR }
[   54.947930] ata1.00: error: { UNC }
[   54.954469] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   55.034952] ata1.00: exception Emask 0x0 SAct 0x218000 SErr 0x0 action 0x0
[   55.034961] ata1.00: irq_stat 0x40000008
[   55.034969] ata1.00: failed command: READ FPDMA QUEUED
[   55.034983] ata1.00: cmd 60/08:78:68:d0:d0/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   55.034989] ata1.00: status: { DRDY ERR }
[   55.034993] ata1.00: error: { UNC }
[   55.682135] ata1.00: exception Emask 0x0 SAct 0x1002 SErr 0x40000 action 0x0
[   55.682140] ata1.00: irq_stat 0x40000008
[   55.682143] ata1: SError: { CommWake }
[   55.682146] ata1.00: failed command: READ FPDMA QUEUED
[   55.682151] ata1.00: cmd 60/08:08:68:d0:d0/00:00:00:00:00/40 tag 1 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   55.682154] ata1.00: status: { DRDY ERR }
[   55.682156] ata1.00: error: { UNC }
[   55.763166] ata1.00: exception Emask 0x0 SAct 0x2020 SErr 0x0 action 0x0
[   55.763170] ata1.00: irq_stat 0x40000008
[   55.763173] ata1.00: failed command: READ FPDMA QUEUED
[   55.763179] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   55.763182] ata1.00: status: { DRDY ERR }
[   55.763183] ata1.00: error: { UNC }
[   61.582245] ata1.00: exception Emask 0x0 SAct 0x10 SErr 0x40000 action 0x0
[   61.582255] ata1.00: irq_stat 0x40000008
[   61.582261] ata1: SError: { CommWake }
[   61.582268] ata1.00: failed command: READ FPDMA QUEUED
[   61.582282] ata1.00: cmd 60/08:20:68:d0:d0/00:00:00:00:00/40 tag 4 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   61.582288] ata1.00: status: { DRDY ERR }
[   61.582292] ata1.00: error: { UNC }
[   61.588820] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   61.665863] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x0
[   61.665870] ata1.00: irq_stat 0x40000008
[   61.665876] ata1.00: failed command: READ FPDMA QUEUED
[   61.665889] ata1.00: cmd 60/08:38:68:d0:d0/00:00:00:00:00/40 tag 7 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   61.665894] ata1.00: status: { DRDY ERR }
[   61.665898] ata1.00: error: { UNC }
[   61.672394] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   67.455388] ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x40000 action 0x0
[   67.455398] ata1.00: irq_stat 0x40000008
[   67.455405] ata1: SError: { CommWake }
[   67.455412] ata1.00: failed command: READ FPDMA QUEUED
[   67.455425] ata1.00: cmd 60/08:f0:68:d0:d0/00:00:00:00:00/40 tag 30 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   67.455430] ata1.00: status: { DRDY ERR }
[   67.455434] ata1.00: error: { UNC }
[   67.461985] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   67.539213] ata1.00: exception Emask 0x0 SAct 0x60 SErr 0x0 action 0x0
[   67.539219] ata1.00: irq_stat 0x40000008
[   67.539225] ata1.00: failed command: READ FPDMA QUEUED
[   67.539238] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   67.539243] ata1.00: status: { DRDY ERR }
[   67.539247] ata1.00: error: { UNC }
[   67.545673] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   73.322807] ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x40000 action 0x0
[   73.322816] ata1.00: irq_stat 0x40000008
[   73.322822] ata1: SError: { CommWake }
[   73.322829] ata1.00: failed command: READ FPDMA QUEUED
[   73.322843] ata1.00: cmd 60/08:a0:68:d0:d0/00:00:00:00:00/40 tag 20 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   73.322848] ata1.00: status: { DRDY ERR }
[   73.322852] ata1.00: error: { UNC }
[   73.329403] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   73.410707] ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0
[   73.410714] ata1.00: irq_stat 0x40000008
[   73.410720] ata1.00: failed command: READ FPDMA QUEUED
[   73.410733] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   73.410738] ata1.00: status: { DRDY ERR }
[   73.410743] ata1.00: error: { UNC }
[   73.417179] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   79.198003] ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x40000 action 0x0
[   79.198013] ata1.00: irq_stat 0x40000008
[   79.198019] ata1: SError: { CommWake }
[   79.198026] ata1.00: failed command: READ FPDMA QUEUED
[   79.198039] ata1.00: cmd 60/08:88:68:d0:d0/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   79.198045] ata1.00: status: { DRDY ERR }
[   79.198049] ata1.00: error: { UNC }
[   79.204579] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   79.281894] ata1.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x0
[   79.281901] ata1.00: irq_stat 0x40000008
[   79.281907] ata1.00: failed command: READ FPDMA QUEUED
[   79.281920] ata1.00: cmd 60/08:e0:68:d0:d0/00:00:00:00:00/40 tag 28 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   79.281926] ata1.00: status: { DRDY ERR }
[   79.281930] ata1.00: error: { UNC }
[   79.288479] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Le PC est inutilisable.
J'envisage d'installer la Linux MINT 21.1

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Posté : mar. 17 janv. 2023 12:34
par Berni18
Installation de Linux Mint 21.1
Plus aucun souci.
dmesg --level err n'affiche rien
Tout fonctionne maintenant correctement.
Merci pour votre aide.