Résolu le 2-08-24 Accès impossible sur une partition du 2eme disque interne après maj LM 22

Postez ici toutes vos demandes d’assistance.
Williame
Messages : 126
Enregistré le : mer. 29 mars 2023 12:34

Accès impossible sur une partition du 2eme disque interne après maj LM 22

Message par Williame »

Bonjour,

Après la Maj vers LM 22, je découvre un problème:

Sur mon SSD interne secondaire, j'ai 4 partitions.

Image

2 partitions sont montées au démarrage du système (Partition 1 (Données) et Partition 3 (Timeshift Mint)), les deux autres se montent à la demande.
La Partition 4 se monte normalement à la demande alors que la partition 2 ( Sauvegarde) refuse de se monter et indique ce message d'erreur :

Image


Image

Tout fonctionnait normalement il y a 2 jours sous LM 21.3
Un peu peur de faire une connerie en tentant de bidouiller tout seul, j'ai besoin de votre aide !

Merci d'avance

:B

EDIT : La partition est accessible à l'aide d'un live USB De LM 21.2.
c'est donc, je pense, un soucis de LM 22
Je pourrais faire une sauvegarde .
J'ai deux dossiers qu'il serait préférable de ne pas perdre mais 170GO tout de même.
J'ai un DD de 320GO disponible pour faire ça mais ça risque de prendre une semaine !
Modifié en dernier par Williame le ven. 2 août 2024 10:21, modifié 2 fois.
Linux Mint Cinnamon 22 / LENOVO IdeaPad 5 15ABA7 / AMD Ryzen 7 5825U with Radeon Graphics × 8 / 8G0

Avatar du membre
cyrille
Administrateur du site
Messages : 13037
Enregistré le : mar. 19 sept. 2017 08:49
Localisation : Nowhere
Contact :

Re: Accès impossible sur une partition du 2eme disque interne

Message par cyrille »

Des infos supplémentaires dans

Code : Tout sélectionner

sudo dmesg
Contenu de

Code : Tout sélectionner

cat /etc/fstab
?séuqartéd sel ruoP / sécnoféd sel ruoP / sreiruréB sel ruoP / ?étéicos elleuQ

https://crust.ovh

Williame
Messages : 126
Enregistré le : mer. 29 mars 2023 12:34

Re: Accès impossible sur une partition du 2eme disque interne

Message par Williame »

Je fais les sauvegardes en ce moment,
Encore 1h ou 2 et je te poste ça.
Merci Cyrille
Modifié en dernier par Williame le mer. 31 juil. 2024 16:55, modifié 1 fois.
Linux Mint Cinnamon 22 / LENOVO IdeaPad 5 15ABA7 / AMD Ryzen 7 5825U with Radeon Graphics × 8 / 8G0

Williame
Messages : 126
Enregistré le : mer. 29 mars 2023 12:34

Re: Accès impossible sur une partition du 2eme disque interne

Message par Williame »

Voilà !

Code : Tout sélectionner

[    0.000000] Linux version 6.8.0-39-generic (buildd@lcy02-amd64-112) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #39-Ubuntu SMP PREEMPT_DYNAMIC Fri Jul  5 21:49:14 UTC 2024 (Ubuntu 6.8.0-39.39-generic 6.8.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-39-generic root=UUID=ac580d79-aac2-40b2-9890-7b6024a5bcbe ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009da0fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000009da1000-0x0000000009efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000009f0f000-0x00000000c727dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c727e000-0x00000000cb47dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cb47e000-0x00000000cd57dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd57e000-0x00000000cd5fdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cd5fe000-0x00000000ce7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce800000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdcfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe0fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ee2fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001ee300000-0x000000022fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0x842f2018-0x842ff857] usable ==> usable
[    0.000000] e820: update [mem 0x842f2018-0x842ff857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009bfffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009c00000-0x0000000009da0fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000009da1000-0x0000000009efffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009f00000-0x0000000009f0efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000009f0f000-0x00000000842f2017] usable
[    0.000000] reserve setup_data: [mem 0x00000000842f2018-0x00000000842ff857] usable
[    0.000000] reserve setup_data: [mem 0x00000000842ff858-0x00000000c727dfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c727e000-0x00000000cb47dfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000cb47e000-0x00000000cd57dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000cd57e000-0x00000000cd5fdfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000cd5fe000-0x00000000ce7fffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ce800000-0x00000000cfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fdc00000-0x00000000fdcfffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe0fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001ee2fffff] usable
[    0.000000] reserve setup_data: [mem 0x00000001ee300000-0x000000022fffffff] reserved
[    0.000000] efi: EFI v2.7 by Phoenix Technologies Ltd.
[    0.000000] efi: ACPI=0xcd5fd000 ACPI 2.0=0xcd5fd014 SMBIOS=0xc9355000 SMBIOS 3.0=0xc9348000 TPMFinalLog=0xcd422000 MEMATTR=0xc37fa018 ESRT=0xc3803e98 INITRD=0x85fefa98 RNG=0xcd5fc018 TPMEventLog=0x84300018 
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem63: MMIO range=[0xfdc00000-0xfdcfffff] (1MB) from e820 map
[    0.000000] e820: remove [mem 0xfdc00000-0xfdcfffff] reserved
[    0.000000] efi: Remove mem64: MMIO range=[0xfe000000-0xfe0fffff] (1MB) from e820 map
[    0.000000] e820: remove [mem 0xfe000000-0xfe0fffff] reserved
[    0.000000] efi: Not removing mem65: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: LENOVO 82SG/LNVNB161216, BIOS KACN25WW 05/30/2024
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1996.107 MHz processor
[    0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000015] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000026] last_pfn = 0x1ee300 max_arch_pfn = 0x400000000
[    0.000038] MTRR map: 6 entries (3 fixed + 3 variable; max 20), built from 9 variable MTRRs
[    0.000041] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000567] last_pfn = 0xce800 max_arch_pfn = 0x400000000
[    0.007137] esrt: Reserving ESRT space from 0x00000000c3803e98 to 0x00000000c3803ef8.
[    0.007146] e820: update [mem 0xc3803000-0xc3803fff] usable ==> reserved
[    0.007172] Using GB pages for direct mapping
[    0.007717] secureboot: Secure boot disabled
[    0.007718] RAMDISK: [mem 0x758b1000-0x7a978fff]
[    0.008421] ACPI: Early table checksum verification disabled
[    0.008425] ACPI: RSDP 0x00000000CD5FD014 000024 (v02 LENOVO)
[    0.008431] ACPI: XSDT 0x00000000CD5FB188 0000EC (v01 LENOVO CB-01    00000003 PTEC 00000002)
[    0.008439] ACPI: FACP 0x00000000C92A6000 000114 (v06 LENOVO CB-01    00000003 PTEC 00000002)
[    0.008446] ACPI: DSDT 0x00000000C9295000 00C3F4 (v01 LENOVO AMD      00001000 INTL 20180313)
[    0.008451] ACPI: FACS 0x00000000CCB7F000 000040
[    0.008455] ACPI: SSDT 0x00000000C938A000 000D03 (v01 LENOVO UsbCTabl 00000001 INTL 20180313)
[    0.008459] ACPI: SSDT 0x00000000C937D000 0072B0 (v02 LENOVO AmdTable 00000002 MSFT 04000000)
[    0.008463] ACPI: IVRS 0x00000000C935B000 0001A4 (v02 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008467] ACPI: SSDT 0x00000000C9328000 0015D1 (v01 LENOVO WmiTable 00000001 INTL 20180313)
[    0.008471] ACPI: POAT 0x00000000C92C0000 000055 (v03 LENOVO CB-01    00000000 PTEC 00000002)
[    0.008475] ACPI: HPET 0x00000000C92A5000 000038 (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008479] ACPI: APIC 0x00000000C92A4000 000138 (v02 LENOVO CB-01    00000000 PTEC 00000002)
[    0.008482] ACPI: MCFG 0x00000000C92A3000 00003C (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008486] ACPI: WSMT 0x00000000C92A2000 000028 (v01 LENOVO CB-01    00000000 PTEC 00000002)
[    0.008490] ACPI: VFCT 0x00000000C9287000 00D884 (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008494] ACPI: SSDT 0x00000000C9281000 005354 (v02 LENOVO AmdTable 00000001 AMD  00000001)
[    0.008498] ACPI: CRAT 0x00000000C9280000 000EC0 (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008501] ACPI: CDIT 0x00000000C927F000 000029 (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008505] ACPI: BATB 0x00000000C927E000 00004A (v02 LENOVO CB-01    00000000 PTEC 00000002)
[    0.008509] ACPI: SSDT 0x00000000C807C000 00053A (v01 LENOVO Tpm2Tabl 00009999 INTL 20180313)
[    0.008513] ACPI: TPM2 0x00000000C807B000 000038 (v04 LENOVO CB-01    00000002 PTEC 00000002)
[    0.008517] ACPI: FPDT 0x00000000C807A000 000044 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.008521] ACPI: SSDT 0x00000000C8077000 000149 (v01 LENOVO AmdTable 00000001 INTL 20180313)
[    0.008525] ACPI: SSDT 0x00000000C8075000 0014C3 (v01 LENOVO AmdTable 00000001 INTL 20180313)
[    0.008528] ACPI: SSDT 0x00000000C8073000 0015A8 (v01 LENOVO AmdTable 00000001 INTL 20180313)
[    0.008532] ACPI: SSDT 0x00000000C806F000 003B0E (v01 LENOVO AmdTable 00000001 INTL 20180313)
[    0.008536] ACPI: BGRT 0x00000000C806E000 000038 (v01 LENOVO CB-01    00000002 PTEC 00000002)
[    0.008540] ACPI: UEFI 0x00000000CCB7D000 0000C6 (v01 LENOVO CB-01    00000001 PTEC 00000002)
[    0.008544] ACPI: SSDT 0x00000000C9389000 00096A (v01 LENOVO AmdTable 00000001 INTL 20180313)
[    0.008547] ACPI: Reserving FACP table memory at [mem 0xc92a6000-0xc92a6113]
[    0.008549] ACPI: Reserving DSDT table memory at [mem 0xc9295000-0xc92a13f3]
[    0.008551] ACPI: Reserving FACS table memory at [mem 0xccb7f000-0xccb7f03f]
[    0.008552] ACPI: Reserving SSDT table memory at [mem 0xc938a000-0xc938ad02]
[    0.008553] ACPI: Reserving SSDT table memory at [mem 0xc937d000-0xc93842af]
[    0.008555] ACPI: Reserving IVRS table memory at [mem 0xc935b000-0xc935b1a3]
[    0.008556] ACPI: Reserving SSDT table memory at [mem 0xc9328000-0xc93295d0]
[    0.008557] ACPI: Reserving POAT table memory at [mem 0xc92c0000-0xc92c0054]
[    0.008559] ACPI: Reserving HPET table memory at [mem 0xc92a5000-0xc92a5037]
[    0.008560] ACPI: Reserving APIC table memory at [mem 0xc92a4000-0xc92a4137]
[    0.008561] ACPI: Reserving MCFG table memory at [mem 0xc92a3000-0xc92a303b]
[    0.008562] ACPI: Reserving WSMT table memory at [mem 0xc92a2000-0xc92a2027]
[    0.008564] ACPI: Reserving VFCT table memory at [mem 0xc9287000-0xc9294883]
[    0.008565] ACPI: Reserving SSDT table memory at [mem 0xc9281000-0xc9286353]
[    0.008566] ACPI: Reserving CRAT table memory at [mem 0xc9280000-0xc9280ebf]
[    0.008568] ACPI: Reserving CDIT table memory at [mem 0xc927f000-0xc927f028]
[    0.008569] ACPI: Reserving BATB table memory at [mem 0xc927e000-0xc927e049]
[    0.008570] ACPI: Reserving SSDT table memory at [mem 0xc807c000-0xc807c539]
[    0.008571] ACPI: Reserving TPM2 table memory at [mem 0xc807b000-0xc807b037]
[    0.008573] ACPI: Reserving FPDT table memory at [mem 0xc807a000-0xc807a043]
[    0.008574] ACPI: Reserving SSDT table memory at [mem 0xc8077000-0xc8077148]
[    0.008575] ACPI: Reserving SSDT table memory at [mem 0xc8075000-0xc80764c2]
[    0.008577] ACPI: Reserving SSDT table memory at [mem 0xc8073000-0xc80745a7]
[    0.008578] ACPI: Reserving SSDT table memory at [mem 0xc806f000-0xc8072b0d]
[    0.008579] ACPI: Reserving BGRT table memory at [mem 0xc806e000-0xc806e037]
[    0.008581] ACPI: Reserving UEFI table memory at [mem 0xccb7d000-0xccb7d0c5]
[    0.008582] ACPI: Reserving SSDT table memory at [mem 0xc9389000-0xc9389969]
[    0.008854] No NUMA configuration found
[    0.008855] Faking a node at [mem 0x0000000000000000-0x00000001ee2fffff]
[    0.008871] NODE_DATA(0) allocated [mem 0x1ee2d5000-0x1ee2fffff]
[    0.009155] Zone ranges:
[    0.009156]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009158]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009161]   Normal   [mem 0x0000000100000000-0x00000001ee2fffff]
[    0.009163]   Device   empty
[    0.009164] Movable zone start for each node
[    0.009167] Early memory node ranges
[    0.009168]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.009170]   node   0: [mem 0x0000000000100000-0x0000000009bfffff]
[    0.009172]   node   0: [mem 0x0000000009da1000-0x0000000009efffff]
[    0.009173]   node   0: [mem 0x0000000009f0f000-0x00000000c727dfff]
[    0.009175]   node   0: [mem 0x00000000cd5fe000-0x00000000ce7fffff]
[    0.009176]   node   0: [mem 0x0000000100000000-0x00000001ee2fffff]
[    0.009179] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ee2fffff]
[    0.009185] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009207] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.009389] On node 0, zone DMA32: 417 pages in unavailable ranges
[    0.014287] On node 0, zone DMA32: 15 pages in unavailable ranges
[    0.014687] On node 0, zone DMA32: 25472 pages in unavailable ranges
[    0.021336] On node 0, zone Normal: 6144 pages in unavailable ranges
[    0.021448] On node 0, zone Normal: 7424 pages in unavailable ranges
[    0.021626] ACPI: PM-Timer IO Port: 0x408
[    0.021640] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.021643] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.021644] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.021646] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.021647] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.021648] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.021649] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.021650] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.021652] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.021653] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.021654] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.021655] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.021656] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.021657] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.021659] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.021660] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.021675] IOAPIC[0]: apic_id 32, version 33, address 0xfec00000, GSI 0-23
[    0.021681] IOAPIC[1]: apic_id 33, version 33, address 0xfec01000, GSI 24-55
[    0.021685] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.021688] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.021694] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.021696] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.021706] e820: update [mem 0xc2e1e000-0xc2f11fff] usable ==> reserved
[    0.021724] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.021750] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.021753] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.021755] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.021757] PM: hibernation: Registered nosave memory: [mem 0x09c00000-0x09da0fff]
[    0.021760] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0efff]
[    0.021762] PM: hibernation: Registered nosave memory: [mem 0x842f2000-0x842f2fff]
[    0.021765] PM: hibernation: Registered nosave memory: [mem 0x842ff000-0x842fffff]
[    0.021767] PM: hibernation: Registered nosave memory: [mem 0xc2e1e000-0xc2f11fff]
[    0.021770] PM: hibernation: Registered nosave memory: [mem 0xc3803000-0xc3803fff]
[    0.021772] PM: hibernation: Registered nosave memory: [mem 0xc727e000-0xcb47dfff]
[    0.021773] PM: hibernation: Registered nosave memory: [mem 0xcb47e000-0xcd57dfff]
[    0.021775] PM: hibernation: Registered nosave memory: [mem 0xcd57e000-0xcd5fdfff]
[    0.021777] PM: hibernation: Registered nosave memory: [mem 0xce800000-0xcfffffff]
[    0.021778] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[    0.021779] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.021781] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfed7ffff]
[    0.021782] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[    0.021783] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xffffffff]
[    0.021785] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[    0.021788] Booting paravirtualized kernel on bare hardware
[    0.021791] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.021802] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.022884] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288
[    0.022895] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152
[    0.022898] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 
[    0.022906] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 
[    0.022942] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-39-generic root=UUID=ac580d79-aac2-40b2-9890-7b6024a5bcbe ro quiet splash
[    0.023045] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.8.0-39-generic", will be passed to user space.
[    0.023879] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.024294] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.024455] Fallback order for Node 0: 0 
[    0.024461] Built 1 zonelists, mobility grouping on.  Total pages: 1767224
[    0.024463] Policy zone: Normal
[    0.024471] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.024518] software IO TLB: area num 16.
[    0.056283] Memory: 6757752K/7181752K available (22528K kernel code, 4440K rwdata, 14300K rodata, 4972K init, 4736K bss, 423740K reserved, 0K cma-reserved)
[    0.057747] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.057785] ftrace: allocating 57843 entries in 226 pages
[    0.075099] ftrace: allocated 226 pages with 4 groups
[    0.076331] Dynamic Preempt: voluntary
[    0.076446] rcu: Preemptible hierarchical RCU implementation.
[    0.076447] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.076449] 	Trampoline variant of Tasks RCU enabled.
[    0.076450] 	Rude variant of Tasks RCU enabled.
[    0.076450] 	Tracing variant of Tasks RCU enabled.
[    0.076451] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.076452] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.080639] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[    0.080881] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.081006] Console: colour dummy device 80x25
[    0.081009] printk: legacy console [tty0] enabled
[    0.081080] ACPI: Core revision 20230628
[    0.081447] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.081468] APIC: Switch to symmetric I/O mode setup
[    0.083146] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[    0.083149] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[    0.083151] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[    0.083153] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[    0.083154] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[    0.083535] APIC: Switched APIC routing to: physical flat
[    0.084342] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088475] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398ba16bd0d, max_idle_ns: 881590506179 ns
[    0.088483] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.21 BogoMIPS (lpj=1996107)
[    0.088508] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.088552] LVT offset 1 assigned for vector 0xf9
[    0.088690] LVT offset 2 assigned for vector 0xf4
[    0.088725] process: using mwait in idle threads
[    0.088727] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.088729] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.088733] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.088737] Spectre V2 : Mitigation: Retpolines
[    0.088738] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.088739] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.088740] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.088743] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.088745] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.088747] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.088749] Speculative Return Stack Overflow: Mitigation: Safe RET
[    0.088756] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.088759] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.088760] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.088761] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.088762] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[    0.088764] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.088766] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.088768] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
[    0.088769] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
[    0.134648] Freeing SMP alternatives memory: 48K
[    0.134654] pid_max: default: 32768 minimum: 301
[    0.141568] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
[    0.141610] landlock: Up and running.
[    0.141612] Yama: becoming mindful.
[    0.141671] AppArmor: AppArmor initialized
[    0.141753] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.141769] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.245190] smpboot: CPU0: AMD Ryzen 7 5825U with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[    0.245480] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.245480] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.245480] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
[    0.245480] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.245480] ... version:                0
[    0.245480] ... bit width:              48
[    0.245480] ... generic registers:      6
[    0.245480] ... value mask:             0000ffffffffffff
[    0.245480] ... max period:             00007fffffffffff
[    0.245480] ... fixed-purpose events:   0
[    0.245480] ... event mask:             000000000000003f
[    0.245480] signal: max sigframe size: 3376
[    0.245480] rcu: Hierarchical SRCU implementation.
[    0.245480] rcu: 	Max phase no-delay instances is 400.
[    0.251626] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.251898] smp: Bringing up secondary CPUs ...
[    0.252113] smpboot: x86: Booting SMP configuration:
[    0.252116] .... node  #0, CPUs:        #2  #4  #6  #8 #10 #12 #14
[    0.254480] TSC synchronization [CPU#0 -> CPU#2]:
[    0.254480] Measured 2839441121 cycles TSC warp between CPUs, turning off TSC clock.
[    0.254491] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.256678]   #1  #3  #5  #7  #9 #11 #13 #15
[    0.259086] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.260552] smp: Brought up 1 node, 16 CPUs
[    0.260552] smpboot: Max logical packages: 1
[    0.260552] smpboot: Total of 16 processors activated (63875.42 BogoMIPS)
[    0.263164] devtmpfs: initialized
[    0.263164] x86/mm: Memory block size: 128MB
[    0.266563] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0efff] (61440 bytes)
[    0.266571] ACPI: PM: Registering ACPI NVS region [mem 0xcb47e000-0xcd57dfff] (34603008 bytes)
[    0.267842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.267864] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.268001] pinctrl core: initialized pinctrl subsystem
[    0.268178] PM: RTC time: 14:35:55, date: 2024-07-31
[    0.268898] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.269244] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.269315] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.269379] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.269396] audit: initializing netlink subsys (disabled)
[    0.269410] audit: type=2000 audit(1722436555.187:1): state=initialized audit_enabled=0 res=1
[    0.269720] thermal_sys: Registered thermal governor 'fair_share'
[    0.269724] thermal_sys: Registered thermal governor 'bang_bang'
[    0.269727] thermal_sys: Registered thermal governor 'step_wise'
[    0.269730] thermal_sys: Registered thermal governor 'user_space'
[    0.269732] thermal_sys: Registered thermal governor 'power_allocator'
[    0.269749] EISA bus registered
[    0.269775] cpuidle: using governor ladder
[    0.269785] cpuidle: using governor menu
[    0.269833] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.269833] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.269833] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.269833] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.269833] PCI: Using configuration type 1 for base access
[    0.270568] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.270595] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.270595] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.270595] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.270595] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.271736] ACPI: Added _OSI(Module Device)
[    0.271740] ACPI: Added _OSI(Processor Device)
[    0.271743] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.271746] ACPI: Added _OSI(Processor Aggregator Device)
[    0.325259] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.331300] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.337586] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.338882] ACPI: EC: EC started
[    0.338884] ACPI: EC: interrupt blocked
[    0.361422] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.361425] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[    0.361427] ACPI: Interpreter enabled
[    0.361446] ACPI: PM: (supports S0 S3 S4 S5)
[    0.361447] ACPI: Using IOAPIC for interrupt routing
[    0.363001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.363003] PCI: Ignoring E820 reservations for host bridge windows
[    0.365430] ACPI: \_SB_.PCI0.GPP4.WL00.WRST: New power resource
[    0.366699] ACPI: \_SB_.PCI0.GP17.XHC1.RHUB.HSP3.BTPR: New power resource
[    0.366931] ACPI: \_SB_.PCI0.GP18.P0SA: New power resource
[    0.372942] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.372948] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.373097] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC]
[    0.373369] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[    0.373371] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.373384] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.373844] PCI host bridge to bus 0000:00
[    0.373848] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000effff window]
[    0.373850] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
[    0.373852] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff window]
[    0.373853] pci_bus 0000:00: root bus resource [mem 0x230000000-0xffffffffff window]
[    0.373855] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.373857] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.373859] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.373876] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 conventional PCI endpoint
[    0.373968] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 conventional PCI endpoint
[    0.374052] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[    0.374156] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[    0.374247] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 PCIe Root Port
[    0.374264] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.374268] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
[    0.374271] pci 0000:00:02.2:   bridge window [mem 0xfd600000-0xfd6fffff]
[    0.374320] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.374430] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400 PCIe Root Port
[    0.374446] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.374451] pci 0000:00:02.4:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.374499] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.374610] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[    0.374701] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 PCIe Root Port
[    0.374716] pci 0000:00:08.1: PCI bridge to [bus 03]
[    0.374720] pci 0000:00:08.1:   bridge window [io  0x1000-0x1fff]
[    0.374723] pci 0000:00:08.1:   bridge window [mem 0xfd100000-0xfd4fffff]
[    0.374729] pci 0000:00:08.1:   bridge window [mem 0x260000000-0x2701fffff 64bit pref]
[    0.374735] pci 0000:00:08.1: enabling Extended Tags
[    0.374772] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.374910] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 PCIe Root Port
[    0.374926] pci 0000:00:08.2: PCI bridge to [bus 04]
[    0.374931] pci 0000:00:08.2:   bridge window [mem 0xfd000000-0xfd0fffff]
[    0.374942] pci 0000:00:08.2: enabling Extended Tags
[    0.374978] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.375109] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[    0.375234] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[    0.375409] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 conventional PCI endpoint
[    0.375482] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 conventional PCI endpoint
[    0.375553] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 conventional PCI endpoint
[    0.375622] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 conventional PCI endpoint
[    0.375691] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 conventional PCI endpoint
[    0.375762] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 conventional PCI endpoint
[    0.375831] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 conventional PCI endpoint
[    0.375900] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 conventional PCI endpoint
[    0.376042] pci 0000:01:00.0: [10ec:b852] type 00 class 0x028000 PCIe Endpoint
[    0.376062] pci 0000:01:00.0: BAR 0 [io  0x2000-0x20ff]
[    0.376087] pci 0000:01:00.0: BAR 2 [mem 0xfd600000-0xfd6fffff 64bit]
[    0.376213] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.376433] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.376544] pci 0000:02:00.0: [2646:5008] type 00 class 0x010802 PCIe Endpoint
[    0.376561] pci 0000:02:00.0: BAR 0 [mem 0xfd500000-0xfd503fff 64bit]
[    0.376890] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.376986] pci 0000:03:00.0: [1002:15e7] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.376998] pci 0000:03:00.0: BAR 0 [mem 0x260000000-0x26fffffff 64bit pref]
[    0.377007] pci 0000:03:00.0: BAR 2 [mem 0x270000000-0x2701fffff 64bit pref]
[    0.377013] pci 0000:03:00.0: BAR 4 [io  0x1000-0x10ff]
[    0.377019] pci 0000:03:00.0: BAR 5 [mem 0xfd400000-0xfd47ffff]
[    0.377028] pci 0000:03:00.0: enabling Extended Tags
[    0.377083] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.377123] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.377221] pci 0000:03:00.1: [1002:1637] type 00 class 0x040300 PCIe Legacy Endpoint
[    0.377229] pci 0000:03:00.1: BAR 0 [mem 0xfd4c8000-0xfd4cbfff]
[    0.377252] pci 0000:03:00.1: enabling Extended Tags
[    0.377286] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.377377] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint
[    0.377391] pci 0000:03:00.2: BAR 2 [mem 0xfd300000-0xfd3fffff]
[    0.377402] pci 0000:03:00.2: BAR 5 [mem 0xfd4cc000-0xfd4cdfff]
[    0.377410] pci 0000:03:00.2: enabling Extended Tags
[    0.377561] pci 0000:03:00.3: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[    0.377573] pci 0000:03:00.3: BAR 0 [mem 0xfd100000-0xfd1fffff 64bit]
[    0.377599] pci 0000:03:00.3: enabling Extended Tags
[    0.377635] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
[    0.377731] pci 0000:03:00.4: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[    0.377743] pci 0000:03:00.4: BAR 0 [mem 0xfd200000-0xfd2fffff 64bit]
[    0.377769] pci 0000:03:00.4: enabling Extended Tags
[    0.377805] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold
[    0.377900] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[    0.377909] pci 0000:03:00.5: BAR 0 [mem 0xfd480000-0xfd4bffff]
[    0.377931] pci 0000:03:00.5: enabling Extended Tags
[    0.377965] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold
[    0.378053] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[    0.378062] pci 0000:03:00.6: BAR 0 [mem 0xfd4c0000-0xfd4c7fff]
[    0.378084] pci 0000:03:00.6: enabling Extended Tags
[    0.378118] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold
[    0.378232] pci 0000:00:08.1: PCI bridge to [bus 03]
[    0.378291] pci 0000:04:00.0: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[    0.378321] pci 0000:04:00.0: BAR 5 [mem 0xfd001000-0xfd0017ff]
[    0.378330] pci 0000:04:00.0: enabling Extended Tags
[    0.378408] pci 0000:04:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.378492] pci 0000:04:00.1: [1022:7901] type 00 class 0x010601 PCIe Endpoint
[    0.378522] pci 0000:04:00.1: BAR 5 [mem 0xfd000000-0xfd0007ff]
[    0.378531] pci 0000:04:00.1: enabling Extended Tags
[    0.378659] pci 0000:00:08.2: PCI bridge to [bus 04]
[    0.379149] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.379242] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.379313] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.379404] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.379491] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.379556] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.379621] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.379686] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.381049] ACPI: EC: interrupt unblocked
[    0.381050] ACPI: EC: event unblocked
[    0.381054] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.381055] ACPI: EC: GPE=0x3
[    0.381057] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[    0.381059] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[    0.381112] iommu: Default domain type: Translated
[    0.381112] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.381112] SCSI subsystem initialized
[    0.381112] libata version 3.00 loaded.
[    0.381112] ACPI: bus type USB registered
[    0.381112] usbcore: registered new interface driver usbfs
[    0.381112] usbcore: registered new interface driver hub
[    0.381112] usbcore: registered new device driver usb
[    0.385406] pps_core: LinuxPPS API ver. 1 registered
[    0.385408] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.385412] PTP clock support registered
[    0.385485] EDAC MC: Ver: 3.0.0
[    0.385597] efivars: Registered efivars operations
[    0.385715] NetLabel: Initializing
[    0.385716] NetLabel:  domain hash size = 128
[    0.385718] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.385740] NetLabel:  unlabeled traffic allowed by default
[    0.385756] mctp: management component transport protocol core
[    0.385756] NET: Registered PF_MCTP protocol family
[    0.385756] PCI: Using ACPI for IRQ routing
[    0.388135] PCI: pci_cache_line_size set to 64 bytes
[    0.388255] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.388257] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
[    0.388259] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff]
[    0.388260] e820: reserve RAM buffer [mem 0x842f2018-0x87ffffff]
[    0.388262] e820: reserve RAM buffer [mem 0xc2e1e000-0xc3ffffff]
[    0.388263] e820: reserve RAM buffer [mem 0xc3803000-0xc3ffffff]
[    0.388264] e820: reserve RAM buffer [mem 0xc727e000-0xc7ffffff]
[    0.388265] e820: reserve RAM buffer [mem 0xce800000-0xcfffffff]
[    0.388267] e820: reserve RAM buffer [mem 0x1ee300000-0x1efffffff]
[    0.388305] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[    0.388305] pci 0000:03:00.0: vgaarb: bridge control possible
[    0.388305] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.388305] vgaarb: loaded
[    0.388305] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.388305] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.389527] clocksource: Switched to clocksource hpet
[    0.390448] VFS: Disk quotas dquot_6.6.0
[    0.390462] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.390628] AppArmor: AppArmor Filesystem Enabled
[    0.390660] pnp: PnP ACPI init
[    0.390836] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[    0.390839] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.390841] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.391186] system 00:03: [io  0x0400-0x04cf] has been reserved
[    0.391189] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.391191] system 00:03: [io  0x04d6] has been reserved
[    0.391193] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.391195] system 00:03: [io  0x0c14] has been reserved
[    0.391196] system 00:03: [io  0x0c50-0x0c52] has been reserved
[    0.391198] system 00:03: [io  0x0c6c] has been reserved
[    0.391200] system 00:03: [io  0x0c6f] has been reserved
[    0.391202] system 00:03: [io  0x0cd0-0x0cdb] has been reserved
[    0.391306] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.391309] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.391311] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.391313] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.391315] system 00:04: [mem 0xfed61000-0xfed613ff] has been reserved
[    0.391317] system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.391755] pnp: PnP ACPI: found 5 devices
[    0.398307] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.398425] NET: Registered PF_INET protocol family
[    0.398548] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.411416] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.411434] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.411477] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.411674] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.411803] TCP: Hash tables configured (established 65536 bind 65536)
[    0.411884] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[    0.411906] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.411928] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.411977] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.411984] NET: Registered PF_XDP protocol family
[    0.411993] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.411996] pci 0000:00:02.2:   bridge window [io  0x2000-0x2fff]
[    0.412000] pci 0000:00:02.2:   bridge window [mem 0xfd600000-0xfd6fffff]
[    0.412005] pci 0000:00:02.4: PCI bridge to [bus 02]
[    0.412009] pci 0000:00:02.4:   bridge window [mem 0xfd500000-0xfd5fffff]
[    0.412014] pci 0000:00:08.1: PCI bridge to [bus 03]
[    0.412016] pci 0000:00:08.1:   bridge window [io  0x1000-0x1fff]
[    0.412019] pci 0000:00:08.1:   bridge window [mem 0xfd100000-0xfd4fffff]
[    0.412022] pci 0000:00:08.1:   bridge window [mem 0x260000000-0x2701fffff 64bit pref]
[    0.412026] pci 0000:00:08.2: PCI bridge to [bus 04]
[    0.412029] pci 0000:00:08.2:   bridge window [mem 0xfd000000-0xfd0fffff]
[    0.412034] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000effff window]
[    0.412036] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xf7ffffff window]
[    0.412038] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfdffffff window]
[    0.412040] pci_bus 0000:00: resource 7 [mem 0x230000000-0xffffffffff window]
[    0.412041] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7 window]
[    0.412043] pci_bus 0000:00: resource 9 [io  0x0d00-0xffff window]
[    0.412045] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.412046] pci_bus 0000:01: resource 1 [mem 0xfd600000-0xfd6fffff]
[    0.412048] pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfd5fffff]
[    0.412050] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.412052] pci_bus 0000:03: resource 1 [mem 0xfd100000-0xfd4fffff]
[    0.412053] pci_bus 0000:03: resource 2 [mem 0x260000000-0x2701fffff 64bit pref]
[    0.412055] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfd0fffff]
[    0.412218] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[    0.412227] pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec
[    0.412535] pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec
[    0.412678] PCI: CLS 32 bytes, default 64
[    0.412688] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.412735] pci 0000:00:01.0: Adding to iommu group 0
[    0.412736] Trying to unpack rootfs image as initramfs...
[    0.412757] pci 0000:00:02.0: Adding to iommu group 1
[    0.412770] pci 0000:00:02.2: Adding to iommu group 2
[    0.412785] pci 0000:00:02.4: Adding to iommu group 3
[    0.412805] pci 0000:00:08.0: Adding to iommu group 4
[    0.412818] pci 0000:00:08.1: Adding to iommu group 5
[    0.412832] pci 0000:00:08.2: Adding to iommu group 6
[    0.412856] pci 0000:00:14.0: Adding to iommu group 7
[    0.412869] pci 0000:00:14.3: Adding to iommu group 7
[    0.412927] pci 0000:00:18.0: Adding to iommu group 8
[    0.412940] pci 0000:00:18.1: Adding to iommu group 8
[    0.412954] pci 0000:00:18.2: Adding to iommu group 8
[    0.412967] pci 0000:00:18.3: Adding to iommu group 8
[    0.412980] pci 0000:00:18.4: Adding to iommu group 8
[    0.412993] pci 0000:00:18.5: Adding to iommu group 8
[    0.413006] pci 0000:00:18.6: Adding to iommu group 8
[    0.413019] pci 0000:00:18.7: Adding to iommu group 8
[    0.413034] pci 0000:01:00.0: Adding to iommu group 9
[    0.413048] pci 0000:02:00.0: Adding to iommu group 10
[    0.413068] pci 0000:03:00.0: Adding to iommu group 11
[    0.413083] pci 0000:03:00.1: Adding to iommu group 12
[    0.413098] pci 0000:03:00.2: Adding to iommu group 13
[    0.413113] pci 0000:03:00.3: Adding to iommu group 14
[    0.413127] pci 0000:03:00.4: Adding to iommu group 15
[    0.413143] pci 0000:03:00.5: Adding to iommu group 16
[    0.413158] pci 0000:03:00.6: Adding to iommu group 17
[    0.413172] pci 0000:04:00.0: Adding to iommu group 18
[    0.413187] pci 0000:04:00.1: Adding to iommu group 19
[    0.415538] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.415547] AMD-Vi: Interrupt remapping enabled
[    0.415548] AMD-Vi: X2APIC enabled
[    0.415749] AMD-Vi: Virtual APIC enabled
[    0.415759] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.415760] software IO TLB: mapped [mem 0x00000000bdc66000-0x00000000c1c66000] (64MB)
[    0.415807] LVT offset 0 assigned for vector 0x400
[    0.415992] perf: AMD IBS detected (0x000003ff)
[    0.415997] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.416593] Initialise system trusted keyrings
[    0.416604] Key type blacklist registered
[    0.416645] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.416656] zbud: loaded
[    0.416934] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.417035] fuse: init (API version 7.39)
[    0.417176] integrity: Platform Keyring initialized
[    0.417179] integrity: Machine keyring initialized
[    0.425786] Key type asymmetric registered
[    0.425787] Asymmetric key parser 'x509' registered
[    0.425806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.425870] io scheduler mq-deadline registered
[    0.428857] pcieport 0000:00:02.2: PME: Signaling with IRQ 28
[    0.428988] pcieport 0000:00:02.4: PME: Signaling with IRQ 29
[    0.429111] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[    0.429408] pcieport 0000:00:08.2: PME: Signaling with IRQ 31
[    0.429519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.431432] ACPI: AC: AC Adapter [ADP0] (on-line)
[    0.431523] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.431545] ACPI: button: Lid Switch [LID]
[    0.431587] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.431608] ACPI: button: Power Button [PWRB]
[    0.431643] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.431702] ACPI: button: Power Button [PWRF]
[    0.431818] Estimated ratio of average max frequency by base frequency (times 1024): 1676
[    0.431840] Monitor-Mwait will be used to enter C-1 state
[    0.431848] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[    0.431989] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[    0.432149] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[    0.432324] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[    0.432489] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[    0.432697] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[    0.432886] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[    0.433090] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[    0.433282] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[    0.433485] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[    0.433610] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[    0.433731] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[    0.433839] ACPI: \_SB_.PLTF.C00C: Found 3 idle states
[    0.434036] ACPI: \_SB_.PLTF.C00D: Found 3 idle states
[    0.434218] ACPI: \_SB_.PLTF.C00E: Found 3 idle states
[    0.434418] ACPI: \_SB_.PLTF.C00F: Found 3 idle states
[    0.434799] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.437790] Linux agpgart interface v0.103
[    0.442613] tpm_crb MSFT0101:00: Disabling hwrng
[    0.446563] loop: module loaded
[    0.446868] ACPI: bus type drm_connector registered
[    0.447287] tun: Universal TUN/TAP device driver, 1.6
[    0.447345] PPP generic driver version 2.4.2
[    0.447481] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[    0.447484] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.448655] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.448747] mousedev: PS/2 mouse device common for all mice
[    0.448908] rtc_cmos 00:01: RTC can wake from S4
[    0.449155] rtc_cmos 00:01: registered as rtc0
[    0.449202] rtc_cmos 00:01: setting system clock to 2024-07-31T14:35:55 UTC (1722436555)
[    0.449234] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[    0.449246] i2c_dev: i2c /dev entries driver
[    0.449336] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.449353] device-mapper: uevent: version 1.0.3
[    0.449407] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.449431] platform eisa.0: Probing EISA bus 0
[    0.449433] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.449435] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.449436] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.449438] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.449439] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.449441] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.449442] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.449444] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.449445] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.449447] platform eisa.0: EISA: Detected 0 cards
[    0.450144] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.455732] ledtrig-cpu: registered to indicate activity on CPUs
[    0.455984] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    0.457119] fbcon: Deferring console take-over
[    0.457121] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.457211] drop_monitor: Initializing network drop monitor service
[    0.457321] NET: Registered PF_INET6 protocol family
[    0.508882] ACPI: battery: Slot [BAT0] (battery present)
[    0.534922] Freeing initrd memory: 82720K
[    0.540914] Segment Routing with IPv6
[    0.540932] In-situ OAM (IOAM) with IPv6
[    0.540968] NET: Registered PF_PACKET protocol family
[    0.541088] Key type dns_resolver registered
[    0.543012] microcode: Current revision: 0x0a50000f
[    0.543692] resctrl: L3 allocation detected
[    0.543696] resctrl: MB allocation detected
[    0.543697] resctrl: L3 monitoring detected
[    0.543726] IPI shorthand broadcast: enabled
[    0.545940] registered taskstats version 1
[    0.546705] Loading compiled-in X.509 certificates
[    0.547118] Loaded X.509 cert 'Build time autogenerated kernel key: 01cc8c7ef9efd65c8e3a7b456d5a82869f136230'
[    0.547432] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.547753] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.547755] blacklist: Loading compiled-in revocation X.509 certificates
[    0.547769] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.547781] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    0.547793] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    0.547804] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    0.547815] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    0.547830] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    0.547842] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    0.547852] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    0.552492] Key type .fscrypt registered
[    0.552493] Key type fscrypt-provisioning registered
[    0.552538] Key type trusted registered
[    0.557566] cryptd: max_cpu_qlen set to 1000
[    0.560289] AVX2 version of gcm_enc/dec engaged.
[    0.560462] AES CTR mode by8 optimization enabled
[    0.571754] Key type encrypted registered
[    0.571757] AppArmor: AppArmor sha256 policy hashing enabled
[    0.572228] integrity: Loading X.509 certificate: UEFI:db
[    0.572246] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f'
[    0.572248] integrity: Loading X.509 certificate: UEFI:db
[    0.572252] integrity: Problem loading X.509 certificate -65
[    0.572253] integrity: Error adding keys to platform keyring UEFI:db
[    0.572255] integrity: Loading X.509 certificate: UEFI:db
[    0.572266] integrity: Loaded X.509 cert ': 6ce2d144201381854ad05e9e8983cfc5'
[    0.572267] integrity: Loading X.509 certificate: UEFI:db
[    0.572286] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.572288] integrity: Loading X.509 certificate: UEFI:db
[    0.572303] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.573927] Loading compiled-in module X.509 certificates
[    0.574243] Loaded X.509 cert 'Build time autogenerated kernel key: 01cc8c7ef9efd65c8e3a7b456d5a82869f136230'
[    0.574245] ima: Allocated hash algorithm: sha256
[    0.586594] ima: No architecture policies found
[    0.586619] evm: Initialising EVM extended attributes:
[    0.586622] evm: security.selinux
[    0.586624] evm: security.SMACK64
[    0.586626] evm: security.SMACK64EXEC
[    0.586628] evm: security.SMACK64TRANSMUTE
[    0.586630] evm: security.SMACK64MMAP
[    0.586632] evm: security.apparmor
[    0.586633] evm: security.ima
[    0.586635] evm: security.capability
[    0.586637] evm: HMAC attrs: 0x1
[    0.587165] PM:   Magic number: 0:850:587
[    0.592623] RAS: Correctable Errors collector initialized.
[    0.592707] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    0.592739] clk: Disabling unused clocks
[    0.594031] Freeing unused decrypted memory: 2028K
[    0.594760] Freeing unused kernel image (initmem) memory: 4972K
[    0.594762] Write protecting the kernel read-only data: 36864k
[    0.595018] Freeing unused kernel image (rodata/data gap) memory: 36K
[    0.636932] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.636940] Run /init as init process
[    0.636942]   with arguments:
[    0.636943]     /init
[    0.636945]     splash
[    0.636946]   with environment:
[    0.636947]     HOME=/
[    0.636948]     TERM=linux
[    0.636949]     BOOT_IMAGE=/boot/vmlinuz-6.8.0-39-generic
[    0.737969] hid: raw HID events driver (C) Jiri Kosina
[    0.739709] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.740008] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:00/input/input4
[    0.886924] input: SYNA2BA6:00 06CB:CE2D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA2BA6:00/0018:06CB:CE2D.0001/input/input5
[    0.887053] input: SYNA2BA6:00 06CB:CE2D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA2BA6:00/0018:06CB:CE2D.0001/input/input6
[    0.887183] hid-generic 0018:06CB:CE2D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA2BA6:00 06CB:CE2D] on i2c-SYNA2BA6:00
[    0.887214] xhci_hcd 0000:03:00.3: xHCI Host Controller
[    0.887218] ahci 0000:04:00.0: version 3.0
[    0.887223] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1
[    0.887352] xhci_hcd 0000:03:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    0.887399] ahci 0000:04:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.887403] ahci 0000:04:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.887656] scsi host0: ahci
[    0.887718] xhci_hcd 0000:03:00.3: xHCI Host Controller
[    0.887722] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2
[    0.887726] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    0.887753] ata1: SATA max UDMA/133 abar m2048@0xfd001000 port 0xfd001100 irq 35 lpm-pol 3
[    0.887821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[    0.887825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.887827] usb usb1: Product: xHCI Host Controller
[    0.887830] usb usb1: Manufacturer: Linux 6.8.0-39-generic xhci-hcd
[    0.887832] usb usb1: SerialNumber: 0000:03:00.3
[    0.887926] ahci 0000:04:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.887930] ahci 0000:04:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.888005] hub 1-0:1.0: USB hub found
[    0.888023] hub 1-0:1.0: 4 ports detected
[    0.888125] scsi host1: ahci
[    0.888175] ata2: SATA max UDMA/133 abar m2048@0xfd000000 port 0xfd000100 irq 45 lpm-pol 3
[    0.888330] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.888360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[    0.888364] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888366] usb usb2: Product: xHCI Host Controller
[    0.888368] usb usb2: Manufacturer: Linux 6.8.0-39-generic xhci-hcd
[    0.888371] usb usb2: SerialNumber: 0000:03:00.3
[    0.888492] hub 2-0:1.0: USB hub found
[    0.888500] hub 2-0:1.0: 2 ports detected
[    0.888767] xhci_hcd 0000:03:00.4: xHCI Host Controller
[    0.888773] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3
[    0.888870] xhci_hcd 0000:03:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    0.889148] xhci_hcd 0000:03:00.4: xHCI Host Controller
[    0.889151] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4
[    0.889154] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    0.889186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[    0.889189] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.889190] usb usb3: Product: xHCI Host Controller
[    0.889192] usb usb3: Manufacturer: Linux 6.8.0-39-generic xhci-hcd
[    0.889193] usb usb3: SerialNumber: 0000:03:00.4
[    0.889299] hub 3-0:1.0: USB hub found
[    0.889307] hub 3-0:1.0: 4 ports detected
[    0.889540] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.889563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[    0.889565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.889566] usb usb4: Product: xHCI Host Controller
[    0.889568] usb usb4: Manufacturer: Linux 6.8.0-39-generic xhci-hcd
[    0.889569] usb usb4: SerialNumber: 0000:03:00.4
[    0.889684] hub 4-0:1.0: USB hub found
[    0.889691] hub 4-0:1.0: 2 ports detected
[    0.935455] input: SYNA2BA6:00 06CB:CE2D Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA2BA6:00/0018:06CB:CE2D.0001/input/input8
[    0.935581] input: SYNA2BA6:00 06CB:CE2D Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-SYNA2BA6:00/0018:06CB:CE2D.0001/input/input9
[    0.935725] hid-multitouch 0018:06CB:CE2D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA2BA6:00 06CB:CE2D] on i2c-SYNA2BA6:00
[    1.058487] ACPI Error: No handler for Region [ECSI] (0000000085d9952c) [EmbeddedControl] (20230628/evregion-130)
[    1.058510] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20230628/exfldio-261)

[    1.058549] 
               Initialized Local Variables for Method [CHKS]:
[    1.058554]   Local0: 000000009c7bf3e4 <Obj>           Integer 00000000000003E8

[    1.058605] No Arguments are initialized for method [CHKS]

[    1.058615] ACPI Error: Aborting method \_SB.UBTC.CHKS due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[    1.058639] ACPI Error: Aborting method \_SB.UBTC.ECWR due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[    1.058662] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[    1.058698] ACPI: \_SB_.UBTC: failed to evaluate _DSM c298836f-a47c-e411-ad36-631042b5008f (0x6)
[    1.058708] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 1
[    1.058715] ucsi_acpi USBC000:00: failed to reset PPM!
[    1.058720] ucsi_acpi USBC000:00: error -EIO: PPM init failed
[    1.123859] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.131827] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.198767] ata1: SATA link down (SStatus 0 SControl 300)
[    1.256132] usb 1-3: New USB device found, idVendor=174f, idProduct=2459, bcdDevice= 0.09
[    1.256139] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.256142] usb 1-3: Product: Integrated Camera
[    1.256144] usb 1-3: Manufacturer:  
[    1.256147] usb 1-3: SerialNumber: 0001
[    1.264569] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.d3
[    1.264587] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.264590] usb 3-1: Product: USB2.0 Hub             
[    1.264592] usb 3-1: Manufacturer: VIA Labs, Inc.         
[    1.264594] usb 3-1: SerialNumber: 000000000
[    1.306536] hub 3-1:1.0: USB hub found
[    1.307440] hub 3-1:1.0: 5 ports detected
[    1.353846] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.355152] ata2.00: ATA-10: CT1000BX500SSD1, M6CR054, max UDMA/133
[    1.356316] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.360357] ata2.00: Features: Dev-Sleep
[    1.365680] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    1.368334] ata2.00: configured for UDMA/133
[    1.379308] usb 2-2: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01
[    1.379322] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.379329] usb 2-2: Product: AS2115
[    1.379334] usb 2-2: Manufacturer: ASMedia
[    1.379339] usb 2-2: SerialNumber: 00000000000000000000
[    1.379465] scsi 1:0:0:0: Direct-Access     ATA      CT1000BX500SSD1  054  PQ: 0 ANSI: 5
[    1.379993] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.380092] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.380105] sd 1:0:0:0: [sda] Write Protect is off
[    1.380109] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.380123] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.380144] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    1.382149]  sda: sda1 sda2 sda3 sda4
[    1.382387] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.384693] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    1.384803] nvme nvme0: pci function 0000:02:00.0
[    1.387749] usb-storage 2-2:1.0: USB Mass Storage device detected
[    1.387904] scsi host2: usb-storage 2-2:1.0
[    1.387988] usbcore: registered new interface driver usb-storage
[    1.401536] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.405749] nvme nvme0: failed to set APST feature (2)
[    1.407928] nvme nvme0: 8/0/0 default/read/poll queues
[    1.411003]  nvme0n1: p1 p2 p3
[    1.412342] usbcore: registered new interface driver uas
[    1.520603] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.d3
[    1.520611] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.520613] usb 4-1: Product: USB3.0 Hub             
[    1.520615] usb 4-1: Manufacturer: VIA Labs, Inc.         
[    1.520616] usb 4-1: SerialNumber: 000000000
[    1.545817] hub 4-1:1.0: USB hub found
[    1.545920] hub 4-1:1.0: 4 ports detected
[    1.633851] usb 3-3: new full-speed USB device number 3 using xhci_hcd
[    1.780658] usb 3-3: New USB device found, idVendor=0bda, idProduct=4853, bcdDevice= 0.00
[    1.780674] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.780680] usb 3-3: Product: Bluetooth Radio
[    1.780686] usb 3-3: Manufacturer: Realtek
[    1.780691] usb 3-3: SerialNumber: 00e04c000001
[    1.906851] usb 3-4: new high-speed USB device number 4 using xhci_hcd
[    2.043561] usb 3-4: New USB device found, idVendor=27c6, idProduct=55a2, bcdDevice= 1.00
[    2.043599] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.043607] usb 3-4: Product: Goodix FingerPrint Device
[    2.043614] usb 3-4: Manufacturer: Generic
[    2.163861] usb 3-1.1: new high-speed USB device number 5 using xhci_hcd
[    2.297092] usb 3-1.1: New USB device found, idVendor=14cd, idProduct=8601, bcdDevice= 0.00
[    2.297101] usb 3-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.297103] usb 3-1.1: Product: USB 2.0 Hub            
[    2.297106] usb 3-1.1: Manufacturer: USB Device  
[    2.361839] hub 3-1.1:1.0: USB hub found
[    2.362795] hub 3-1.1:1.0: 4 ports detected
[    2.418961] scsi 2:0:0:0: Direct-Access     ASMT     2115             0    PQ: 0 ANSI: 6
[    2.419335] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.419767] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.420099] sd 2:0:0:0: [sdb] Write Protect is off
[    2.420102] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    2.420434] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.422088]  sdb: sdb1
[    2.422190] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.493961] usb 3-1.3: new full-speed USB device number 6 using xhci_hcd
[    2.660506] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c542, bcdDevice= 3.08
[    2.660523] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.660529] usb 3-1.3: Product: Wireless Receiver
[    2.660535] usb 3-1.3: Manufacturer: Logitech
[    2.717860] usb 3-1.1.2: new full-speed USB device number 7 using xhci_hcd
[    2.831748] usb 3-1.1.2: New USB device found, idVendor=0b95, idProduct=6802, bcdDevice= 0.12
[    2.831764] usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.831772] usb 3-1.1.2: Product: AX68002
[    2.831778] usb 3-1.1.2: Manufacturer: ASIX Electronics
[    2.831784] usb 3-1.1.2: SerialNumber: 00000001
[    2.874720] hub 3-1.1.2:1.0: USB hub found
[    2.877504] hub 3-1.1.2:1.0: 7 ports detected
[    2.879857] usb 3-1.5: new high-speed USB device number 8 using xhci_hcd
[    2.964746] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01
[    2.964755] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.964757] usb 3-1.5: Product: USB Billboard Device   
[    2.964759] usb 3-1.5: Manufacturer: VIA Labs, Inc.         
[    2.964761] usb 3-1.5: SerialNumber: 0000000000000001
[    2.978448] input: Logitech Wireless Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C542.0002/input/input11
[    2.978683] hid-generic 0003:046D:C542.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Receiver] on usb-0000:03:00.4-1.3/input0
[    2.978735] usbcore: registered new interface driver usbhid
[    2.978737] usbhid: USB HID core driver
[    3.201656] usb 3-1.1.2.1: new full-speed USB device number 9 using xhci_hcd
[    3.302204] usb 3-1.1.2.1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
[    3.302210] usb 3-1.1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.302213] usb 3-1.1.2.1: Product: USB Keyboard
[    3.302216] usb 3-1.1.2.1: Manufacturer: Logitech
[    3.353323] usb 4-1.4: new SuperSpeed USB device number 3 using xhci_hcd
[    3.365191] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[    3.365196] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    3.365199] usb 4-1.4: Product: USB 10/100/1000 LAN
[    3.365201] usb 4-1.4: Manufacturer: Realtek
[    3.365203] usb 4-1.4: SerialNumber: 001000001
[    3.421781] usbcore: registered new device driver r8152-cfgselector
[    3.425437] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.1/3-1.1.2.1:1.0/0003:046D:C31C.0003/input/input12
[    3.437580] raid6: avx2x4   gen() 43435 MB/s
[    3.454580] raid6: avx2x2   gen() 38160 MB/s
[    3.471581] raid6: avx2x1   gen() 31374 MB/s
[    3.471583] raid6: using algorithm avx2x4 gen() 43435 MB/s
[    3.476701] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:03:00.4-1.1.2.1/input0
[    3.485361] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.1/3-1.1.2.1:1.1/0003:046D:C31C.0004/input/input13
[    3.488581] raid6: .... xor() 6235 MB/s, rmw enabled
[    3.488583] raid6: using avx2x2 recovery algorithm
[    3.489310] xor: automatically using best checksumming function   avx       
[    3.536695] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.1/3-1.1.2.1:1.1/0003:046D:C31C.0004/input/input14
[    3.536792] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:03:00.4-1.1.2.1/input1
[    3.545320] r8152-cfgselector 4-1.4: reset SuperSpeed USB device number 3 using xhci_hcd
[    3.564257] Btrfs loaded, zoned=yes, fsverity=yes
[    3.566327] r8152 4-1.4:1.0: load rtl8153b-2 v2 04/27/23 successfully
[    3.594146] r8152 4-1.4:1.0 eth0: v1.12.13
[    3.594175] usbcore: registered new interface driver r8152
[    3.596698] usbcore: registered new interface driver cdc_ether
[    3.601475] r8152 4-1.4:1.0 enx4ce173423da0: renamed from eth0
[    3.624615] usb 3-1.1.2.2: new full-speed USB device number 10 using xhci_hcd
[    3.669944] EXT4-fs (nvme0n1p2): mounted filesystem ac580d79-aac2-40b2-9890-7b6024a5bcbe ro with ordered data mode. Quota mode: none.
[    3.735214] usb 3-1.1.2.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[    3.735221] usb 3-1.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.735223] usb 3-1.1.2.2: Product: USB Receiver
[    3.735226] usb 3-1.1.2.2: Manufacturer: Logitech
[    3.809276] systemd[1]: Inserted module 'autofs4'
[    3.838434] systemd[1]: systemd 255.4-1ubuntu8.2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    3.838452] systemd[1]: Detected architecture x86-64.
[    3.857371] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.2/3-1.1.2.2:1.0/0003:046D:C52B.0005/input/input15
[    3.909102] hid-generic 0003:046D:C52B.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:03:00.4-1.1.2.2/input0
[    3.914462] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.2/3-1.1.2.2:1.1/0003:046D:C52B.0006/input/input16
[    3.914731] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.2/3-1.1.2.2:1.1/0003:046D:C52B.0006/input/input17
[    3.966774] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.2/3-1.1.2.2:1.1/0003:046D:C52B.0006/input/input18
[    3.967136] hid-generic 0003:046D:C52B.0006: input,hiddev0,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:03:00.4-1.1.2.2/input1
[    3.971508] hid-generic 0003:046D:C52B.0007: hiddev1,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.4-1.1.2.2/input2
[    4.048393] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    4.117925] systemd[1]: Queued start job for default target graphical.target.
[    4.134481] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    4.134873] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    4.135154] systemd[1]: Created slice user.slice - User and Session Slice.
[    4.135216] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    4.135366] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    4.135389] systemd[1]: Expecting device dev-disk-by\x2duuid-1c36d3c9\x2d221d\x2d4536\x2dbf52\x2d0d2c264fa6de.device - /dev/disk/by-uuid/1c36d3c9-221d-4536-bf52-0d2c264fa6de...
[    4.135403] systemd[1]: Expecting device dev-disk-by\x2duuid-4AB7\x2d251E.device - /dev/disk/by-uuid/4AB7-251E...
[    4.135415] systemd[1]: Expecting device dev-disk-by\x2duuid-744F2ECE10C3D920.device - /dev/disk/by-uuid/744F2ECE10C3D920...
[    4.135439] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    4.135464] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[    4.135483] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    4.135500] systemd[1]: Reached target slices.target - Slice Units.
[    4.135524] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    4.135615] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[    4.135896] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[    4.135991] systemd[1]: Listening on syslog.socket - Syslog Socket.
[    4.136794] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[    4.136883] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[    4.136937] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    4.137029] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    4.137128] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    4.137167] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.137273] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    4.137356] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    4.138297] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    4.138936] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    4.139553] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    4.140239] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    4.141684] systemd[1]: Starting systemd-journald.service - Journal Service...
[    4.141772] systemd[1]: Finished blk-availability.service - Availability of block devices.
[    4.142734] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    4.143415] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    4.144081] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.144908] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    4.145852] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[    4.146728] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    4.147653] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    4.148346] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    4.149033] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[    4.149106] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    4.150333] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    4.150353] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.151101] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    4.151147] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.151980] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    4.153327] pstore: Using crash dump compression: deflate
[    4.154010] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    4.154166] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    4.154310] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    4.154443] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    4.154817] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    4.154848] pstore: Registered efi_pstore as persistent store backend
[    4.155067] systemd-journald[419]: Collecting audit messages is disabled.
[    4.155167] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    4.155390] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    4.155751] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    4.155975] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[    4.156276] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    4.156452] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    4.156720] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    4.156889] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    4.157151] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    4.157327] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    4.157606] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    4.157782] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[    4.159058] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    4.159758] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    4.159814] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[    4.160753] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[    4.164296] lp: driver loaded but no devices found
[    4.164324] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    4.164477] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    4.167071] ppdev: user-space parallel port driver
[    4.178676] EXT4-fs (nvme0n1p2): re-mounted ac580d79-aac2-40b2-9890-7b6024a5bcbe r/w. Quota mode: none.
[    4.179603] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.
[    4.180001] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[    4.206704] systemd[1]: Activating swap swapfile.swap - /swapfile...
[    4.207183] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    4.207225] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[    4.208092] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[    4.208139] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.
[    4.208800] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[    4.208818] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    4.209161] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[    4.209461] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    4.210224] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    4.214100] Adding 2097148k swap on /swapfile.  Priority:-2 extents:8 across:2138092k SS
[    4.214146] systemd[1]: Activated swap swapfile.swap - /swapfile.
[    4.214215] systemd[1]: Reached target swap.target - Swaps.
[    4.214332] systemd[1]: Started systemd-journald.service - Journal Service.
[    4.222258] systemd-journald[419]: Received client request to flush runtime journal.
[    4.243600] systemd-journald[419]: /var/log/journal/bed8d88937874b4d9d8062ff7168e149/system.journal: Journal file uses a different sequence number ID, rotating.
[    4.243607] systemd-journald[419]: Rotating system journal.
[    4.387557] ccp 0000:03:00.2: enabling device (0000 -> 0002)
[    4.387594] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.387598] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.395553] ccp 0000:03:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[    4.396311] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    4.396739] ccp 0000:03:00.2: tee enabled
[    4.396821] ccp 0000:03:00.2: psp enabled
[    4.454732] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.455116] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.455327] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    4.456887] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    4.456891] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.457498] snd_rn_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002)
[    4.461765] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input20
[    4.463463] ideapad_acpi VPC2004:00: Keyboard backlight control not available
[    4.481777] EXT4-fs (sda3): mounted filesystem 1c36d3c9-221d-4536-bf52-0d2c264fa6de r/w with ordered data mode. Quota mode: none.
[    4.495447] mc: Linux media interface: v0.10
[    4.651519] Bluetooth: Core ver 2.22
[    4.651557] NET: Registered PF_BLUETOOTH protocol family
[    4.651560] Bluetooth: HCI device and connection manager initialized
[    4.651565] Bluetooth: HCI socket layer initialized
[    4.651569] Bluetooth: L2CAP socket layer initialized
[    4.651590] Bluetooth: SCO socket layer initialized
[    4.652000] videodev: Linux video capture interface: v2.00
[    4.655476] rtw89core: loading out-of-tree module taints kernel.
[    4.655480] rtw89core: module verification failed: signature and/or required key missing - tainting kernel
[    4.663961] kvm_amd: TSC scaling supported
[    4.663964] kvm_amd: Nested Virtualization enabled
[    4.663966] kvm_amd: Nested Paging enabled
[    4.663976] kvm_amd: Virtual VMLOAD VMSAVE supported
[    4.663977] kvm_amd: Virtual GIF supported
[    4.663978] kvm_amd: LBR virtualization supported
[    4.671545] usbcore: registered new interface driver btusb
[    4.673880] usb 1-3: Found UVC 1.10 device Integrated Camera (174f:2459)
[    4.675223] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
[    4.677214] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    4.677218] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
[    4.679855] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
[    4.680381] usbcore: registered new interface driver uvcvideo
[    4.680566] Bluetooth: hci0: RTL: cfg_sz 6, total sz 58003
[    4.685034] rtw89_core: exports duplicate symbol rtw89_alloc_ieee80211_hw (owned by rtw89core)
[    4.685072] MCE: In-kernel MCE decoding enabled.
[    4.696122] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[    4.696289] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[    4.696474] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002)
[    4.771999] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input21
[    4.772946] rtw89_8852be 0000:01:00.0: enabling device (0000 -> 0003)
[    4.773172] intel_rapl_common: Found RAPL domain package
[    4.773177] intel_rapl_common: Found RAPL domain core
[    4.776685] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC257: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.776689] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.776692] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.776694] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.776696] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.776698] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    4.776700] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    4.777541] rtw89_8852be 0000:01:00.0: Firmware version 0.27.32.1, cmd version 0, type 1
[    4.777545] rtw89_8852be 0000:01:00.0: Firmware version 0.27.32.1, cmd version 0, type 3
[    4.796728] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input22
[    4.796797] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input23
[    5.055828] rtw89_8852be 0000:01:00.0: chip rfe_type is 1
[    5.202237] Bluetooth: hci0: RTL: fw version 0xdbc6b20f
[    5.352235] Bluetooth: hci0: AOSP extensions version v1.00
[    5.352239] Bluetooth: hci0: AOSP quality report is supported
[    6.348350] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input24
[    6.350790] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input25
[    6.351279] rtw89_8852be 0000:01:00.0 wlp1s0: renamed from wlan0
[    6.359598] [drm] amdgpu kernel modesetting enabled.
[    6.363418] amdgpu: Virtual CRAT table created for CPU
[    6.363435] amdgpu: Topology: Add CPU node
[    6.363535] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[    6.363612] [drm] initializing kernel modesetting (RENOIR 0x1002:0x15E7 0x17AA:0x3B27 0xC1).
[    6.363769] [drm] register mmio base: 0xFD400000
[    6.363771] [drm] register mmio size: 524288
[    6.366959] [drm] add ip block number 0 <soc15_common>
[    6.366961] [drm] add ip block number 1 <gmc_v9_0>
[    6.366963] [drm] add ip block number 2 <vega10_ih>
[    6.366965] [drm] add ip block number 3 <psp>
[    6.366966] [drm] add ip block number 4 <smu>
[    6.366968] [drm] add ip block number 5 <dm>
[    6.366969] [drm] add ip block number 6 <gfx_v9_0>
[    6.366971] [drm] add ip block number 7 <sdma_v4_0>
[    6.366972] [drm] add ip block number 8 <vcn_v2_0>
[    6.366974] [drm] add ip block number 9 <jpeg_v2_0>
[    6.366984] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[    6.366987] amdgpu: ATOM BIOS: 113-BARCELO-003
[    6.375181] [drm] VCN decode is enabled in VM mode
[    6.375183] [drm] VCN encode is enabled in VM mode
[    6.377269] [drm] JPEG decode is enabled in VM mode
[    6.400066] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[    6.400071] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[    6.400076] amdgpu 0000:03:00.0: amdgpu: MODE2 reset
[    6.400561] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    6.400580] amdgpu 0000:03:00.0: amdgpu: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[    6.400584] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    6.400592] [drm] Detected VRAM RAM=1024M, BAR=1024M
[    6.400594] [drm] RAM width 128bits DDR4
[    6.400740] [drm] amdgpu: 1024M of VRAM memory ready
[    6.400743] [drm] amdgpu: 3387M of GTT memory ready.
[    6.400778] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.400916] [drm] PCIE GART of 1024M enabled.
[    6.400918] [drm] PTB located at 0x000000F43FC00000
[    6.401513] [drm] Loading DMUB firmware via PSP: version=0x01010028
[    6.402090] [drm] Found VCN firmware Version ENC: 1.21 DEC: 7 VEP: 0 Revision: 2
[    6.402098] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware
[    6.427254] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.4-1.1.2.2/input2
[    6.541851] input: Logitech Wireless Device PID:400a Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.2/3-1.1.2.2:1.2/0003:046D:C52B.0007/0003:046D:400A.0008/input/input26
[    6.542048] hid-generic 0003:046D:400A.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech Wireless Device PID:400a] on usb-0000:03:00.4-1.1.2.2/input2:1
[    6.593498] input: Logitech M325 as /devices/pci0000:00/0000:00:08.1/0000:03:00.4/usb3/3-1/3-1.1/3-1.1.2/3-1.1.2.2/3-1.1.2.2:1.2/0003:046D:C52B.0007/0003:046D:400A.0008/input/input30
[    6.593625] logitech-hidpp-device 0003:046D:400A.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech M325] on usb-0000:03:00.4-1.1.2.2/input2:1
[    7.128710] [drm] reserve 0x400000 from 0xf43f800000 for PSP TMR
[    7.219364] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    7.230810] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    7.230814] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    7.231217] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[    7.233452] [drm] Display Core v3.2.266 initialized on DCN 2.1
[    7.233455] [drm] DP-HDMI FRL PCON supported
[    7.234102] [drm] DMUB hardware initialized: version=0x01010028
[    7.259288] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    7.625486] logitech-hidpp-device 0003:046D:400A.0008: HID++ 2.0 device connected.
[    7.626081] [drm] kiq ring mec 2 pipe 1 q 0
[    7.628999] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    7.629019] [drm] JPEG decode initialized successfully.
[    7.640608] amdgpu: HMM registered 1024MB device memory
[    7.642346] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    7.642365] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[    7.642510] amdgpu: Virtual CRAT table created for GPU
[    7.643053] amdgpu: Topology: Add dGPU node [0x15e7:0x1002]
[    7.643056] kfd kfd: amdgpu: added device 1002:15e7
[    7.643126] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 8
[    7.643130] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    7.643132] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
[    7.643134] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
[    7.643136] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
[    7.643138] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
[    7.643139] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
[    7.643141] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
[    7.643143] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
[    7.643144] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
[    7.643146] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
[    7.643148] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
[    7.643149] amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0
[    7.643151] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
[    7.643152] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
[    7.643154] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
[    7.643156] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
[    7.643157] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
[    7.646014] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:03:00.0 on minor 1
[    7.656252] fbcon: amdgpudrmfb (fb0) is primary device
[    7.656255] fbcon: Deferring console take-over
[    7.656257] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    7.672744] [drm] DSC precompute is not needed.
[    9.453260] zfs: module license 'CDDL' taints kernel.
[    9.453264] Disabling lock debugging due to kernel taint
[    9.453276] zfs: module license taints kernel.
[   10.921148] ZFS: Loaded module v2.2.2-0ubuntu9, ZFS pool version 5000, ZFS filesystem version 5
[   10.963771] NET: Registered PF_ATMPVC protocol family
[   10.963776] NET: Registered PF_ATMSVC protocol family
[   10.980071] audit: type=1400 audit(1722436566.029:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="keybase" pid=1084 comm="apparmor_parser"
[   10.980607] audit: type=1400 audit(1722436566.029:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=1067 comm="apparmor_parser"
[   10.980613] audit: type=1400 audit(1722436566.029:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-create" pid=1093 comm="apparmor_parser"
[   10.980616] audit: type=1400 audit(1722436566.029:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=1063 comm="apparmor_parser"
[   10.980620] audit: type=1400 audit(1722436566.029:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="element-desktop" pid=1073 comm="apparmor_parser"
[   10.980623] audit: type=1400 audit(1722436566.029:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="loupe" pid=1090 comm="apparmor_parser"
[   10.980627] audit: type=1400 audit(1722436566.029:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ipa_verify" pid=1082 comm="apparmor_parser"
[   10.980630] audit: type=1400 audit(1722436566.029:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=1060 comm="apparmor_parser"
[   10.980634] audit: type=1400 audit(1722436566.029:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chrome" pid=1068 comm="apparmor_parser"
[   10.980637] audit: type=1400 audit(1722436566.029:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mmdebstrap" pid=1100 comm="apparmor_parser"
[   11.225826] zram: Added device: zram0
[   11.235919] zram0: detected capacity change from 0 to 6936704
[   11.244533] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.244541] Bluetooth: BNEP filters: protocol multicast
[   11.244548] Bluetooth: BNEP socket layer initialized
[   11.245946] Adding 3468348k swap on /dev/zram0.  Priority:5 extents:1 across:3468348k SS
[   11.248405] Bluetooth: MGMT ver 1.22
[   11.253405] NET: Registered PF_ALG protocol family
[   11.410646] NET: Registered PF_QIPCRTR protocol family
[   11.839662] r8152 4-1.4:1.0 enx4ce173423da0: carrier on
[   14.508175] Bluetooth: RFCOMM TTY layer initialized
[   14.508184] Bluetooth: RFCOMM socket layer initialized
[   14.508188] Bluetooth: RFCOMM ver 1.11
[   16.442404] wlp1s0: authenticate with 22:36:e0:f1:cf:8d (local address=f4:6a:dd:66:6f:b9)
[   16.442418] wlp1s0: send auth to 22:36:e0:f1:cf:8d (try 1/3)
[   16.443105] wlp1s0: authenticated
[   16.443602] wlp1s0: associate with 22:36:e0:f1:cf:8d (try 1/3)
[   16.444668] wlp1s0: RX AssocResp from 22:36:e0:f1:cf:8d (capab=0x1031 status=0 aid=2)
[   16.553812] wlp1s0: associated
[   18.858199] vboxdrv: Found 16 processor cores/threads
[   18.861874] Guest personality initialized and is inactive
[   18.861920] VMCI host device registered (name=vmci, major=10, minor=120)
[   18.861922] Initialized host personality
[   18.873830] vboxdrv: TSC mode is Invariant, tentative frequency 1996390644 Hz
[   18.873834] vboxdrv: Successfully loaded version 7.0.16_Ubuntu r162802 (interface 0x00330004)
[   18.875847] NET: Registered PF_VSOCK protocol family
[   18.881665] VBoxNetFlt: Successfully started.
[   18.888771] VBoxNetAdp: Successfully started.
[   20.394460] systemd-journald[419]: /var/log/journal/bed8d88937874b4d9d8062ff7168e149/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[   21.849547] ntfs3: Max link count 4000
[   21.849555] ntfs3: Enabled Linux POSIX ACLs support
[   21.849557] ntfs3: Read-only LZX/Xpress compression included
[   58.458269] Bluetooth: hci0: AOSP extensions version v1.00
[   58.458281] Bluetooth: hci0: AOSP quality report is supported
[   70.542982] input: JBL Flip 3 (AVRCP) as /devices/virtual/input/input31
[  771.043118] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

Code : Tout sélectionner

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/nvme0n1p2 during installation
UUID=ac580d79-aac2-40b2-9890-7b6024a5bcbe /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/nvme0n1p1 during installation
#UUID=4AB7-251E  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
/dev/disk/by-uuid/744F2ECE10C3D920 /mnt/744F2ECE10C3D920 auto nosuid,nodev,nofail,x-gvfs-show 0 0
/dev/disk/by-id/usb-M_Series_NVMe_SSD_128G_21511071511429-0:0-part2 /mnt/usb-M_Series_NVMe_SSD_128G_21511071511429-0:0-part2 auto nosuid,nodev,nofail,noauto,x-gvfs-show 0 0
/dev/disk/by-uuid/1c36d3c9-221d-4536-bf52-0d2c264fa6de /mnt/1c36d3c9-221d-4536-bf52-0d2c264fa6de auto nosuid,nodev,nofail,x-gvfs-show 0 0
#UUID=4AB7-251E  /boot/efi       vfat    defaults      0       1
UUID=4AB7-251E  /boot/efi       vfat    defaults      0       1
/code]
Linux Mint Cinnamon 22 / LENOVO IdeaPad 5 15ABA7 / AMD Ryzen 7 5825U with Radeon Graphics × 8 / 8G0

Jennatux
Messages : 2003
Enregistré le : mer. 1 nov. 2017 01:59

Re: Accès impossible sur une partition du 2eme disque interne

Message par Jennatux »

Bonjour
Ele n'est pas montée automatiquement (un peu le bazar dans ton fstab)

Code : Tout sélectionner

sudo blkid -o list
Clevo
Ubuntu 24.04 - Xubuntu 24.04 - Ubuntu Unity 24.04 - Kubuntu 24.04
Tour Ubuntu Gnome 24.04 - Ubuntu Unity 24.04 - Xubuntu 24.04 - Debian 12 Gnome et Xfce - Linux Mint 21 Cinnamon et Xfce - Lmde6
Avec partition data

Une fraction de seconde

Williame
Messages : 126
Enregistré le : mer. 29 mars 2023 12:34

Re: Accès impossible sur une partition du 2eme disque interne

Message par Williame »

Jennatux a écrit :
mer. 31 juil. 2024 22:21
Bonjour
Ele n'est pas montée automatiquement (un peu le bazar dans ton fstab)

Code : Tout sélectionner

sudo blkid -o list
Non, c’est volontaire, c’est une partition réservée exclusivement aux sauvegardes. De même que la partition 4 qui n’est pas utilisée pour le moment, elle va probablement rejoindre celle de gauche ou celle de droite prochainement.

Qu’entends tu par " (un peu le bazar dans ton fstab) " ?
J’ai commencé à utiliser ce SSD alors que j’étais encore en dual boot avec Windows. Certaines partitions devaient pouvoir être lues par Windows, donc NTFS et elles le sont restées.
Sinon, l’ordre des partitions qui ne se suivent pas vient sûrement du fait qu’elle ont été créés après coup et après des redimentionnements /déplacements de partitions.
Sincèrement, je n’y avais jamais fait attention !
Linux Mint Cinnamon 22 / LENOVO IdeaPad 5 15ABA7 / AMD Ryzen 7 5825U with Radeon Graphics × 8 / 8G0

Jennatux
Messages : 2003
Enregistré le : mer. 1 nov. 2017 01:59

Re: Accès impossible sur une partition du 2eme disque interne

Message par Jennatux »

As tu eu accès a cette partition avec un Windows dernièrement ?
Clevo
Ubuntu 24.04 - Xubuntu 24.04 - Ubuntu Unity 24.04 - Kubuntu 24.04
Tour Ubuntu Gnome 24.04 - Ubuntu Unity 24.04 - Xubuntu 24.04 - Debian 12 Gnome et Xfce - Linux Mint 21 Cinnamon et Xfce - Lmde6
Avec partition data

Une fraction de seconde

Williame
Messages : 126
Enregistré le : mer. 29 mars 2023 12:34

Re: Accès impossible sur une partition du 2eme disque interne

Message par Williame »

Jennatux a écrit :
mer. 31 juil. 2024 22:39
As tu eu accès a cette partition avec un Windows dernièrement ?
Je n’ai plus de Windows sur cet ordinateur depuis au moins 3 ans.
Comme je l’ai dit dans mon premier message, j’ai fait la Maj LM22 hier. Avant hier, sous LM 21.3, j’y avais acces et j’y ai encore acces à partir d’un live USB LM 21.2
Linux Mint Cinnamon 22 / LENOVO IdeaPad 5 15ABA7 / AMD Ryzen 7 5825U with Radeon Graphics × 8 / 8G0

Jennatux
Messages : 2003
Enregistré le : mer. 1 nov. 2017 01:59

Re: Accès impossible sur une partition du 2eme disque interne

Message par Jennatux »

Essaie peut être

Code : Tout sélectionner

sudo apt install ntfs-3g
Puis un redémarrage
Clevo
Ubuntu 24.04 - Xubuntu 24.04 - Ubuntu Unity 24.04 - Kubuntu 24.04
Tour Ubuntu Gnome 24.04 - Ubuntu Unity 24.04 - Xubuntu 24.04 - Debian 12 Gnome et Xfce - Linux Mint 21 Cinnamon et Xfce - Lmde6
Avec partition data

Une fraction de seconde

Williame
Messages : 126
Enregistré le : mer. 29 mars 2023 12:34

Re: Accès impossible sur une partition du 2eme disque interne

Message par Williame »

Jennatux a écrit :
jeu. 1 août 2024 12:31
Essaie peut être

Code : Tout sélectionner

sudo apt install ntfs-3g
Puis un redémarrage
ntfs-3g est déjà présent et à jour.
merci à toi !
Linux Mint Cinnamon 22 / LENOVO IdeaPad 5 15ABA7 / AMD Ryzen 7 5825U with Radeon Graphics × 8 / 8G0

Répondre