Forum-Francophone-LinuxMint.fr

Bonjour,
J'ai effectué la mise à jour de LM 21.3 cinnamon vers LM 22 ; puis de LM 22 vers LM 22.3.
Apparemment ça ne s'est pas trop mal passé... Je m'apprête à modifier ma signature sur le forum
et je réalise que si j'ouvre " renseignement sur le système " j'obtiens la page suivante :

alors que le contenu du fichier relève " Distro: Linux Mint 21.3 Virginia base: Ubuntu 24.04 noble "

Code : Tout sélectionner

System:
  Kernel: 5.15.0-164-generic arch: x86_64 bits: 64 compiler: gcc v: 11.4.0 clocksource: tsc
  Desktop: Cinnamon v: 6.6.5 tk: GTK v: 3.24.41 wm: Muffin v: 6.6.2 vt: 7 dm: LightDM v: 1.30.0
    Distro: Linux Mint 21.3 Virginia base: Ubuntu 24.04 noble
Machine:
  Type: Desktop System: ASUS product: All Series v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: H97M-E v: Rev X.0x serial: <superuser required> part-nu: All
    uuid: <superuser required> BIOS: American Megatrends v: 0336 date: 05/22/2014
CPU:
  Info: quad core model: Intel Core i5-4460 bits: 64 type: MCP smt: <unsupported> arch: Haswell
    rev: 3 cache: L1: 256 KiB L2: 1024 KiB L3: 6 MiB
  Speed (MHz): avg: 3278 high: 3310 min/max: 800/3400 cores: 1: 3221 2: 3295 3: 3287 4: 3310
    bogomips: 25540
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics vendor: ASUSTeK
    driver: i915 v: kernel arch: Gen-7.5 ports: active: VGA-1 empty: HDMI-A-1,HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:0412 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: modesetting
    unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1280x1024 s-dpi: 96 s-size: 338x270mm (13.31x10.63") s-diag: 433mm (17.03")
  Monitor-1: VGA-1 model: HP L1906 serial: <filter> res: 1280x1024 hz: 60 dpi: 96
    size: 337x270mm (13.27x10.63") diag: 484mm (19.1") modes: max: 1280x1024 min: 720x400
  API: EGL v: 1.5 hw: drv: intel crocus platforms: device: 0 drv: crocus device: 1 drv: swrast
    gbm: drv: crocus surfaceless: drv: crocus x11: drv: crocus inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.7-0ubuntu0.24.04.2 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel HD Graphics 4600 (HSW GT2) device-ID: 8086:0412
  API: Vulkan v: 1.3.275 layers: 3 surfaces: xcb,xlib device: 0 type: integrated-gpu driver: N/A
    device-ID: 8086:0412 device: 1 type: cpu driver: N/A device-ID: 10005:0000
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 9 Series Family HD Audio vendor: ASUSTeK 9 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:8ca0 class-ID: 0403
  API: ALSA v: k5.15.0-164-generic status: kernel-api
  Server-1: PipeWire v: 1.0.5 status: off
  Server-2: PulseAudio v: 16.1 status: active
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK AM1I-A
    driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.36 TiB used: 845.5 GiB (60.5%)
  ID-1: /dev/sda vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB speed: 6.0 Gb/s tech: SSD
    serial: <filter> fw-rev: 023 scheme: MBR
  ID-2: /dev/sdb vendor: Western Digital model: WD10EZEX-08M2NA0 size: 931.51 GiB speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: 1A01 scheme: GPT
Partition:
  ID-1: / size: 311.94 GiB used: 23.74 GiB (7.6%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 1.27 GiB used: 6.1 MiB (0.5%) fs: vfat dev: /dev/sda5
  ID-3: /home size: 914.71 GiB used: 821.75 GiB (89.8%) fs: ext4 dev: /dev/sdb1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 92.8 MiB (4.5%) priority: -2 file: /swapfile
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Intel ports: 6 rev: 2.0 speed: 480 Mb/s lanes: 1 chip-ID: 8087:8009
    class-ID: 0900
  Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-4: 2-1:2 info: Intel Integrated Hub ports: 8 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 8087:8001 class-ID: 0900
  Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 14 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-9:2 info: Pixart Imaging Gaming Mouse type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA
    chip-ID: 093a:2533 class-ID: 0300
  Device-2: 3-11:3 info: Genesys Logic Logilink CR0012 type: mass storage driver: usb-storage
    interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 05e3:0745 class-ID: 0806
    serial: <filter>
  Device-3: 3-12:4 info: Canon G5000 series type: printer driver: usbfs interfaces: 5 rev: 2.0
    speed: 480 Mb/s lanes: 1 power: 2mA chip-ID: 04a9:1867 class-ID: 0701 serial: <filter>
  Hub-6: 4-0:1 info: super-speed hub ports: 6 rev: 3.0 speed: 5 Gb/s lanes: 1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 37.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 3153
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http: //packages.linuxmint.com zena main upstream import backport
    2: deb http: //archive.ubuntu.com/ubuntu noble main restricted universe multiverse
    3: deb http: //archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse
    4: deb http: //archive.ubuntu.com/ubuntu noble-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
  Active apt repos in: /etc/apt/sources.list.d/ubuntuhandbook1-apps-jammy.list
    1: deb [arch=amd64 signed-by=/etc/apt/keyrings/ubuntuhandbook1-apps-jammy.gpg] https: //ppa.launchpadcontent.net/ubuntuhandbook1/apps/ubuntu jammy main
  Active apt repos in: /etc/apt/sources.list.d/vincent-vandevyvre-vvv-jammy.list
    1: deb [signed-by=/etc/apt/keyrings/vincent-vandevyvre-vvv-jammy.gpg] https: //ppa.launchpadcontent.net/vincent-vandevyvre/vvv/ubuntu jammy main
Info:
  Memory: total: 8 GiB available: 7.63 GiB used: 2.11 GiB (27.7%)
  Processes: 245 Power: uptime: 2h 0m states: freeze,mem,disk suspend: deep wakeups: 1
    hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
  Compilers: gcc: 13.3.0 alt: 11/12 Client: Unknown python3.12 client inxi: 3.3.34

Il y a surement une explication ?
Merci pour votre aide

Bonjour,
Je ne reproduis pas.
Un petit redémarrage peut-être ? Ne pas oublier, non plus, de bien faire les mises à jour de cette nouvelle mouture 22.3. Mis en ligne il y a peu, on imagine sans peine qu’il doit se trouver pas mal de râleurs (dans mon genre), un peu désorientés par le moindre petit bug de jeunesse.

Bonsoir à nouveau,
Merci ici aussi : mais les redémarrages n'y changent rien, et les màj non plus ! Je reste donc à cheval entre les deux versions ne sachant sur laquelle je pianote en ce moment, Virginia version Zena, ou Zena version Virginia !!
Difficile dans ce contexte de changer ma signature...
Aller, à bientôt
Justin

Je reviens sur mon problème de mise à jour.
J'observe que Timeshift procède toujours en Virginia !
Par ailleurs dans la liste des noyaux je remarque que mon noyau actif est 5.15.0-164 et qu'il est " non pris en charge " alors qu'il y a des noyaux disponible typés 6.8 ou 6.14 .
Dois-je changer de noyau ? Est-ce l'origine du pb ?
Une idée ?

Hello, je précise que le boot au démarrage indique bien LM 22.3, ( en plus de Tricia que j'ai gardé en dual boot)

Slt,
c'est compliqué ton histoire

(entre la confusion de nom de version , le noyau ne correspondant pas ...... )

Sinon de ce que je vois, c'est que tu as des (2) PPA qui sont toujours sous
ubuntu jammy soit mint 21.3 virginia .........
Sans doute ceux ci ont "perturbé la MAJ !
Je te conseille de les désactivés ( les 2 PPA) puis de refaire la maj:

Code : Tout sélectionner

sudo apt update && sudo apt install -f

Code : Tout sélectionner

sudo apt dist-upgrade

mets les retours ici et biensûr comme à chaque fois , faire une sauvegarde des données

@+

Merci tirry pour ton aide,
j'ai bien retrouvé les ppa. J'ai trouvé un peu de difficulté à les desactiver ; finalement je les ai supprimés.
Une fois passées les commandes que tu m'as indiqué, le relevé système donne :

Code : Tout sélectionner

System:
  Kernel: 6.8.0-90-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
  Desktop: Cinnamon v: 6.6.5 tk: GTK v: 3.24.41 wm: Muffin v: 6.6.2 tools: cinnamon-screensaver
    vt: 7 dm: LightDM v: 1.30.0 Distro: [color=#BF0000]Linux Mint 21.3 Virginia base[/color]: Ubuntu 24.04 noble
Machine:
  Type: Desktop System: ASUS product: All Series v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: H97M-E v: Rev X.0x serial: <superuser required> part-nu: All
    uuid: <superuser required> BIOS: American Megatrends v: 0336 date: 05/22/2014
CPU:
  Info: quad core model: Intel Core i5-4460 bits: 64 type: MCP smt: <unsupported> arch: Haswell
    rev: 3 cache: L1: 256 KiB L2: 1024 KiB L3: 6 MiB
  Speed (MHz): avg: 3193 min/max: 800/3400 cores: 1: 3193 2: 3193 3: 3193 4: 3193 bogomips: 25542
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics vendor: ASUSTeK
    driver: i915 v: kernel arch: Gen-7.5 ports: active: VGA-1 empty: HDMI-A-1,HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:0412 class-ID: 0300
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: modesetting
    unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1280x1024 s-dpi: 96 s-size: 338x270mm (13.31x10.63") s-diag: 433mm (17.03")
  Monitor-1: VGA-1 model: HP L1906 serial: <filter> res: 1280x1024 hz: 60 dpi: 96
    size: 337x270mm (13.27x10.63") diag: 484mm (19.1") modes: max: 1280x1024 min: 720x400
  API: EGL v: 1.5 hw: drv: intel crocus platforms: device: 0 drv: crocus device: 1 drv: swrast
    gbm: drv: crocus surfaceless: drv: crocus x11: drv: crocus inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.0.7-0ubuntu0.24.04.2 glx-v: 1.4
    direct-render: yes renderer: Mesa Intel HD Graphics 4600 (HSW GT2) device-ID: 8086:0412
  API: Vulkan v: 1.3.275 layers: 3 surfaces: xcb,xlib device: 0 type: integrated-gpu driver: N/A
    device-ID: 8086:0412 device: 1 type: cpu driver: N/A device-ID: 10005:0000
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 9 Series Family HD Audio vendor: ASUSTeK 9 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:8ca0 class-ID: 0403
  API: ALSA v: k6.8.0-90-generic status: kernel-api
  Server-1: PipeWire v: 1.0.5 status: off
  Server-2: PulseAudio v: 16.1 status: active
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK AM1I-A
    driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.36 TiB used: 730.62 GiB (52.3%)
  ID-1: /dev/sda vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB speed: 6.0 Gb/s tech: SSD
    serial: <filter> fw-rev: 023 scheme: MBR
  ID-2: /dev/sdb vendor: Western Digital model: WD10EZEX-08M2NA0 size: 931.51 GiB speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: 1A01 scheme: GPT
Partition:
  ID-1: / size: 311.94 GiB used: 17.61 GiB (5.6%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 1.27 GiB used: 6.1 MiB (0.5%) fs: vfat dev: /dev/sda5
  ID-3: /home size: 914.71 GiB used: 713 GiB (77.9%) fs: ext4 dev: /dev/sdb1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 1-1:2 info: Intel ports: 6 rev: 2.0 speed: 480 Mb/s lanes: 1 chip-ID: 8087:8009
    class-ID: 0900
  Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-4: 2-1:2 info: Intel Integrated Hub ports: 8 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 8087:8001 class-ID: 0900
  Hub-5: 3-0:1 info: hi-speed hub with single TT ports: 14 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-9:2 info: Pixart Imaging Gaming Mouse type: mouse,keyboard
    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA
    chip-ID: 093a:2533 class-ID: 0300
  Device-2: 3-11:3 info: Genesys Logic Logilink CR0012 type: mass storage driver: usb-storage
    interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 05e3:0745 class-ID: 0806
    serial: <filter>
  Device-3: 3-12:4 info: Canon G5000 series type: printer driver: usbfs interfaces: 5 rev: 2.0
    speed: 480 Mb/s lanes: 1 power: 2mA chip-ID: 04a9:1867 class-ID: 0701 serial: <filter>
  Hub-6: 4-0:1 info: super-speed hub ports: 6 rev: 3.0 speed: 5 Gb/s lanes: 1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 38.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Repos:
  Packages: pm: dpkg pkgs: 3073
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http: //packages.linuxmint.com zena main upstream import backport
    2: deb http: //archive.ubuntu.com/ubuntu noble main restricted universe multiverse
    3: deb http: //archive.ubuntu.com/ubuntu noble-updates main restricted universe multiverse
    4: deb http: //archive.ubuntu.com/ubuntu noble-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
Info:
  Memory: total: 8 GiB available: 7.64 GiB used: 1.29 GiB (16.9%)
  Processes: 231 Power: uptime: 0m states: freeze,mem,disk suspend: deep wakeups: 0
    hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
  Compilers: gcc: 13.3.0 alt: 11/12 Client: Unknown python3.12 client inxi: 3.3.34

Il y a maj du noyau, et les ppa ne semblent plus apparaitre !
Il y a toujours une référence à " LM 21.3 Virginia base " ?

J'imagine que le pb est résolu,
Je t'en remercie, et te souhaite une bonne journée.

Bonjour,
Hélas, en vue de modifier ma signature, et après avoir exécuté inxi -F , je retombe sur Virginia

Code : Tout sélectionner

cdep@cdep-All-Series:~$ inxi -F
System:
  Host: cdep-All-Series Kernel: 6.8.0-90-generic arch: x86_64 bits: 64
  Desktop: Cinnamon v: 6.6.5 Distro: Linux Mint 21.3 Virginia
Machine:
  Type: Desktop System: ASUS product: All Series v: N/A
    serial: <superuser required>
  Mobo: ASUSTeK model: H97M-E v: Rev X.0x serial: <superuser required>
    BIOS: American Megatrends v: 0336 date: 05/22/2014
CPU:
  Info: quad core model: Intel Core i5-4460 bits: 64 type: MCP cache:
    L2: 1024 KiB
  Speed (MHz): avg: 1094 min/max: 800/3400 cores: 1: 798 2: 798 3: 1982
    4: 798
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
    driver: i915 v: kernel
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915
    resolution: 1280x1024~60Hz
  API: EGL v: 1.5 drivers: crocus,swrast
    platforms: gbm,x11,surfaceless,device
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa
    v: 25.0.7-0ubuntu0.24.04.2 renderer: Mesa Intel HD Graphics 4600 (HSW GT2)
  API: Vulkan v: 1.3.275 drivers: N/A surfaces: xcb,xlib
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
    driver: snd_hda_intel
  Device-2: Intel 9 Series Family HD Audio driver: snd_hda_intel
  API: ALSA v: k6.8.0-90-generic status: kernel-api
  Server-1: PulseAudio v: 16.1 status: active
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    driver: r8169
  IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: 78:24:af:3e:4e:57
Drives:
  Local Storage: total: 1.36 TiB used: 730.61 GiB (52.3%)
  ID-1: /dev/sda vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB
  ID-2: /dev/sdb vendor: Western Digital model: WD10EZEX-08M2NA0
    size: 931.51 GiB
Partition:
  ID-1: / size: 311.94 GiB used: 17.6 GiB (5.6%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 1.27 GiB used: 6.1 MiB (0.5%) fs: vfat
    dev: /dev/sda5
  ID-3: /home size: 914.71 GiB used: 713 GiB (77.9%) fs: ext4 dev: /dev/sdb1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
  System Temperatures: cpu: 31.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 8 GiB available: 7.64 GiB used: 1.87 GiB (24.5%)
  Processes: 232 Uptime: 27m Shell: Bash inxi: 3.3.34

Je reste dépité dubitatif !!
A+

Slt,
je pige pas trop ce qu'il y a :
Donne le retour de :

Code : Tout sélectionner

cat /etc/issue

Code : Tout sélectionner

cat /etc/issue.net

Code : Tout sélectionner

cat /etc/lsb-release

Sinon refait les commandes données plus haut puis relance le système

@+

Salut, tirry
voilà le retout

Code : Tout sélectionner

All-Series:~$ cat /etc/issue
Linux Mint 21.3 Virginia \n \l

cdep@cdep-All-Series:~$ cat /etc/issue.net
Linux Mint 21.3 Virginia
cdep@cdep-All-Series:~$ cat /etc/lsb-release
DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=21.3
DISTRIB_CODENAME=virginia
DISTRIB_DESCRIPTION="Linux Mint 21.3 Virginia"

Forum-Francophone-LinuxMint.fr

Passage à LM 22.3 ?!

Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!

Re: Passage à LM 22.3 ?!