Résolu le 17-01-23 Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Postez ici toutes vos demandes d’assistance générale concernant le fonctionnement de Linux Mint, qui n'entrent pas dans les autres rubriques.
Répondre
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

Bonjour,
ci-joint un des nombreux relevés de plantage :
https://termbin.com/d7o9
Merci pour votre aide
Modifié en dernier par Berni18 le dim. 15 janv. 2023 23:36, modifié 1 fois.
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

Instabilité Xfce : tableau de bord non fonctionnel, disparition de plank et Thunar indisponible.
Le problème est récurant à chaque démarrage. Le PC devient inutilisable. Cela peut-il venir du disque SSD ?
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Avatar du membre
tyrry
modérateur
Messages : 6798
Enregistré le : mar. 21 juil. 2015 07:42
Localisation : à l'ouest

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par tyrry »

Slt,
c'est quel pc de ta signature ?
Est-ce une nouvelle installe ?
Si oui as tu vérifié l'iso ?
Est-ce suite à un mise à jour ?
Etc etc ......
Il faudrait détaillé un peu quand même ;)
@+
Image
Haut
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

Il s’agit du SAMSUNG Notebook NP400B5B.
sudo dmesg | egrep 'fail|warn|err|firm'

Code : Tout sélectionner

[    0.071356] ACPI: IRQ0 used by override.
[    0.071358] ACPI: IRQ9 used by override.
[    0.155589] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.172119] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.199369] ACPI: EC: interrupt blocked
[    0.424026] ACPI: Using IOAPIC for interrupt routing
[    0.438329] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.446939] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
[    0.447052] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
[    0.447163] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
[    0.447273] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[    0.447383] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
[    0.447492] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
[    0.447603] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 *7 10 11)
[    0.447713] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11)
[    0.448674] ACPI: EC: interrupt unblocked
[    0.809767] fbcon: Deferring console take-over
[    1.307067] sdhci: Copyright(c) Pierre Ossman
[    1.335260] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.336628] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.248120] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.854779] random: 78 urandom warning(s) missed due to ratelimiting
[    7.405350] wl: module verification failed: signature and/or required key missing - tainting kernel
[   16.338896] ata1.00: READ LOG DMA EXT failed, trying PIO
[   16.340209] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   16.340232] ata1.00: error: { UNC }
[   16.345591] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
[   16.345605] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[   16.460262] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   16.460285] ata1.00: error: { UNC }
[   16.466142] sd 0:0:0:0: [sda] tag#2 Add. Sense: Unrecovered read error - auto reallocate failed
[   16.466156] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   16.576089] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   16.576111] ata1.00: error: { UNC }
[   16.581980] sd 0:0:0:0: [sda] tag#22 Add. Sense: Unrecovered read error - auto reallocate failed
[   16.581992] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   18.588262] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:6c:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   18.588287] ata1.00: error: { UNC }
[   18.593896] sd 0:0:0:0: [sda] tag#7 Add. Sense: Unrecovered read error - auto reallocate failed
[   18.593911] blk_update_request: I/O error, dev sda, sector 13684844 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   18.932101] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:64:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   18.932125] ata1.00: error: { UNC }
[   18.938078] sd 0:0:0:0: [sda] tag#30 Add. Sense: Unrecovered read error - auto reallocate failed
[   18.938092] blk_update_request: I/O error, dev sda, sector 13684836 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   19.020120] ata1.00: failed command: READ FPDMA QUEUED
                        res 41/40:00:64:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   19.020143] ata1.00: error: { UNC }
[   19.025983] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed
[   19.025997] blk_update_request: I/O error, dev sda, sector 13684836 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  607.386985] wlp2s0 Scan_results error (-22)
[  607.959322] ACPI: EC: interrupt blocked
[  608.004924] ACPI: EC: interrupt unblocked
df -h

Code : Tout sélectionner

Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
udev               3,8G       0  3,8G   0% /dev
tmpfs              787M    1,6M  785M   1% /run
/dev/sda1           31G     13G   18G  42% /
tmpfs              3,9G       0  3,9G   0% /dev/shm
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs              3,9G       0  3,9G   0% /sys/fs/cgroup
tmpfs              500M     40M  461M   8% /tmp
/dev/sda2          146G    2,9G  136G   3% /home
/dev/sda3          727G    361G  330G  53% /media/DATAS
tmpfs              787M     16K  787M   1% /run/user/1000
mv ~/.config/xfce4 ~/.config/xfce4-bak
redémarrage du PC : celui-ci semble fonctionner, mais toujours un relevé de plantage, voir ci-dessous :
https://termbin.com/t5r6
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

La stabilité est temporaire. Après plusieurs redémarrage, on se retrouve avec le même problème.
Je pense à une défaillance du disque SSD.
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

Ferme tu bien tes sessions ? oui, je reboot complètement le PC !
sudo smartctl -a /dev/sda

Code : Tout sélectionner

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-137-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Marvell based SanDisk SSDs
Device Model:     SanDisk SSD PLUS 1000GB
Serial Number:    203817A00594
LU WWN Device Id: 5 001b44 8bbcc0220
Firmware Version: UH5100RL
User Capacity:    1 000 207 286 272 bytes [1,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jan 16 13:56:14 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 182) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       489
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1272
165 Total_Write/Erase_Count 0x0032   100   100   000    Old_age   Always       -       249
166 Min_W/E_Cycle           0x0032   100   100   ---    Old_age   Always       -       1
167 Min_Bad_Block/Die       0x0032   100   100   ---    Old_age   Always       -       0
168 Maximum_Erase_Cycle     0x0032   100   100   ---    Old_age   Always       -       3
169 Total_Bad_Block         0x0032   100   100   ---    Old_age   Always       -       909
170 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
173 Avg_Write/Erase_Count   0x0032   100   100   000    Old_age   Always       -       1
174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       50
184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       402
188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   077   062   000    Old_age   Always       -       23 (Min/Max 9/62)
199 SATA_CRC_Error          0x0032   100   100   ---    Old_age   Always       -       0
230 Perc_Write/Erase_Count  0x0032   100   100   000    Old_age   Always       -       71 20 71
232 Perc_Avail_Resrvd_Space 0x0033   100   100   005    Pre-fail  Always       -       100
233 Total_NAND_Writes_GiB   0x0032   100   100   ---    Old_age   Always       -       1161
234 Perc_Write/Erase_Ct_BC  0x0032   100   100   000    Old_age   Always       -       3894
241 Total_Writes_GiB        0x0030   100   100   000    Old_age   Offline      -       1598
242 Total_Reads_GiB         0x0030   100   100   000    Old_age   Offline      -       1180
244 Thermal_Throttle        0x0032   000   100   ---    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported
Le disque semble correct.
Modifié en dernier par Berni18 le lun. 16 janv. 2023 18:49, modifié 2 fois.
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

ls -l ~/.session

Code : Tout sélectionner

ls: impossible d'accéder à '/home/bcaulier/.session': Aucun fichier ou dossier de ce type
ls -l ~/.Xauthority

Code : Tout sélectionner

-rw------- 1 bcaulier bcaulier 115 janv. 17 09:35 /home/bcaulier/.Xauthority
Mise a jour sur le dernier noyau de Linux Mint 20.3
uname -a

Code : Tout sélectionner

Linux SAMSUNG-400B4B 5.4.0-137-generic #154-Ubuntu SMP Thu Jan 5 17:03:22 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux
dmesg --level err

Code : Tout sélectionner

[   17.076986] ata1.00: exception Emask 0x0 SAct 0x60 SErr 0x40000 action 0x0
[   17.076994] ata1.00: irq_stat 0x40000008
[   17.077001] ata1: SError: { CommWake }
[   17.077007] ata1.00: failed command: READ FPDMA QUEUED
[   17.077021] ata1.00: cmd 60/00:28:38:d0:d0/01:00:00:00:00/40 tag 5 ncq dma 131072 in
                        res 41/40:00:60:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   17.077026] ata1.00: status: { DRDY ERR }
[   17.077030] ata1.00: error: { UNC }
[   17.085106] blk_update_request: I/O error, dev sda, sector 13684832 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[   17.168651] ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
[   17.168659] ata1.00: irq_stat 0x40000008
[   17.168665] ata1.00: failed command: READ FPDMA QUEUED
[   17.168679] ata1.00: cmd 60/08:18:68:d0:d0/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   17.168684] ata1.00: status: { DRDY ERR }
[   17.168688] ata1.00: error: { UNC }
[   17.175326] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   17.252670] ata1.00: exception Emask 0x0 SAct 0x800010 SErr 0x0 action 0x0
[   17.252677] ata1.00: irq_stat 0x40000008
[   17.252683] ata1.00: failed command: READ FPDMA QUEUED
[   17.252696] ata1.00: cmd 60/08:b8:68:d0:d0/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   17.252701] ata1.00: status: { DRDY ERR }
[   17.252705] ata1.00: error: { UNC }
[   17.259279] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   19.140619] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x0
[   19.140624] ata1.00: irq_stat 0x40000008
[   19.140627] ata1: SError: { CommWake }
[   19.140630] ata1.00: failed command: READ FPDMA QUEUED
[   19.140636] ata1.00: cmd 60/08:00:68:d0:d0/00:00:00:00:00/40 tag 0 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   19.140638] ata1.00: status: { DRDY ERR }
[   19.140640] ata1.00: error: { UNC }
[   19.147068] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   19.224660] ata1.00: exception Emask 0x0 SAct 0x1800004 SErr 0x0 action 0x0
[   19.224669] ata1.00: irq_stat 0x40000008
[   19.224677] ata1.00: failed command: READ FPDMA QUEUED
[   19.224690] ata1.00: cmd 60/08:b8:68:d0:d0/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   19.224696] ata1.00: status: { DRDY ERR }
[   19.224700] ata1.00: error: { UNC }
[   19.231290] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   21.432479] ata1.00: exception Emask 0x0 SAct 0x1e2000 SErr 0x40000 action 0x0
[   21.432484] ata1.00: irq_stat 0x40000008
[   21.432487] ata1: SError: { CommWake }
[   21.432490] ata1.00: failed command: READ FPDMA QUEUED
[   21.432496] ata1.00: cmd 60/08:88:68:d0:d0/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   21.432498] ata1.00: status: { DRDY ERR }
[   21.432500] ata1.00: error: { UNC }
[   21.439057] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   21.516454] ata1.00: exception Emask 0x0 SAct 0xf80000 SErr 0x0 action 0x0
[   21.516459] ata1.00: irq_stat 0x40000008
[   21.516462] ata1.00: failed command: READ FPDMA QUEUED
[   21.516468] ata1.00: cmd 60/08:98:68:d0:d0/00:00:00:00:00/40 tag 19 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   21.516470] ata1.00: status: { DRDY ERR }
[   21.516472] ata1.00: error: { UNC }
[   21.522895] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   21.832612] ata1.00: exception Emask 0x0 SAct 0x8 SErr 0x40000 action 0x0
[   21.832616] ata1.00: irq_stat 0x40000008
[   21.832619] ata1: SError: { CommWake }
[   21.832622] ata1.00: failed command: READ FPDMA QUEUED
[   21.832628] ata1.00: cmd 60/08:18:68:d0:d0/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   21.832630] ata1.00: status: { DRDY ERR }
[   21.832632] ata1.00: error: { UNC }
[   21.839004] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.180396] ata1.00: exception Emask 0x1 SAct 0x60000001 SErr 0x0 action 0x6 frozen
[   52.180406] ata1.00: irq_stat 0x40000008
[   52.180414] ata1.00: failed command: READ FPDMA QUEUED
[   52.180428] ata1.00: cmd 60/30:00:48:c6:4f/00:00:00:00:00/40 tag 0 ncq dma 24576 in
                        res 40/00:00:68:d0:d0/00:00:00:00:00/00 Emask 0x5 (timeout)
[   52.180433] ata1.00: status: { DRDY }
[   52.180439] ata1.00: failed command: READ FPDMA QUEUED
[   52.180450] ata1.00: cmd 60/08:e8:68:d0:d0/00:00:00:00:00/40 tag 29 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[   52.180455] ata1.00: status: { DRDY }
[   52.180459] ata1.00: failed command: READ FPDMA QUEUED
[   52.180470] ata1.00: cmd 60/08:f0:b0:d5:06/00:00:01:00:00/40 tag 30 ncq dma 4096 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[   52.180474] ata1.00: status: { DRDY }
[   52.507639] blk_update_request: I/O error, dev sda, sector 5228104 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
[   52.507701] blk_update_request: I/O error, dev sda, sector 17225136 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[   52.606960] ata1.00: exception Emask 0x0 SAct 0x8001c023 SErr 0x0 action 0x0
[   52.606970] ata1.00: irq_stat 0x40000008
[   52.606977] ata1.00: failed command: READ FPDMA QUEUED
[   52.606991] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.606997] ata1.00: status: { DRDY ERR }
[   52.607001] ata1.00: error: { UNC }
[   52.613377] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.701567] ata1.00: exception Emask 0x0 SAct 0x607e0000 SErr 0x0 action 0x0
[   52.701576] ata1.00: irq_stat 0x40000008
[   52.701584] ata1.00: failed command: READ FPDMA QUEUED
[   52.701597] ata1.00: cmd 60/08:88:68:d0:d0/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.701602] ata1.00: status: { DRDY ERR }
[   52.701607] ata1.00: error: { UNC }
[   52.707969] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.796137] ata1.00: exception Emask 0x0 SAct 0x80000000 SErr 0x0 action 0x0
[   52.796147] ata1.00: irq_stat 0x40000008
[   52.796155] ata1.00: failed command: READ FPDMA QUEUED
[   52.796169] ata1.00: cmd 60/08:f8:68:d0:d0/00:00:00:00:00/40 tag 31 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.796175] ata1.00: status: { DRDY ERR }
[   52.796179] ata1.00: error: { UNC }
[   52.802644] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.882703] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   52.882712] ata1.00: irq_stat 0x40000008
[   52.882718] ata1.00: failed command: READ FPDMA QUEUED
[   52.882731] ata1.00: cmd 60/08:00:68:d0:d0/00:00:00:00:00/40 tag 0 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.882737] ata1.00: status: { DRDY ERR }
[   52.882741] ata1.00: error: { UNC }
[   52.889114] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   52.969566] ata1.00: exception Emask 0x0 SAct 0x18006 SErr 0x0 action 0x0
[   52.969576] ata1.00: irq_stat 0x40000008
[   52.969584] ata1.00: failed command: READ FPDMA QUEUED
[   52.969597] ata1.00: cmd 60/08:78:68:d0:d0/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   52.969602] ata1.00: status: { DRDY ERR }
[   52.969607] ata1.00: error: { UNC }
[   52.975978] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   53.072267] ata1.00: exception Emask 0x0 SAct 0x10184400 SErr 0x0 action 0x0
[   53.072271] ata1.00: irq_stat 0x40000008
[   53.072274] ata1.00: failed command: READ FPDMA QUEUED
[   53.072280] ata1.00: cmd 60/08:50:68:d0:d0/00:00:00:00:00/40 tag 10 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   53.072282] ata1.00: status: { DRDY ERR }
[   53.072284] ata1.00: error: { UNC }
[   53.078719] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   53.174540] ata1.00: exception Emask 0x0 SAct 0x9c07f0 SErr 0x0 action 0x0
[   53.174550] ata1.00: irq_stat 0x40000008
[   53.174558] ata1.00: failed command: READ FPDMA QUEUED
[   53.174572] ata1.00: cmd 60/08:b8:68:d0:d0/00:00:00:00:00/40 tag 23 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   53.174577] ata1.00: status: { DRDY ERR }
[   53.174582] ata1.00: error: { UNC }
[   53.180999] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   54.947910] ata1.00: exception Emask 0x0 SAct 0x30000 SErr 0x40000 action 0x0
[   54.947915] ata1.00: irq_stat 0x40000008
[   54.947918] ata1: SError: { CommWake }
[   54.947921] ata1.00: failed command: READ FPDMA QUEUED
[   54.947926] ata1.00: cmd 60/08:80:68:d0:d0/00:00:00:00:00/40 tag 16 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   54.947929] ata1.00: status: { DRDY ERR }
[   54.947930] ata1.00: error: { UNC }
[   54.954469] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   55.034952] ata1.00: exception Emask 0x0 SAct 0x218000 SErr 0x0 action 0x0
[   55.034961] ata1.00: irq_stat 0x40000008
[   55.034969] ata1.00: failed command: READ FPDMA QUEUED
[   55.034983] ata1.00: cmd 60/08:78:68:d0:d0/00:00:00:00:00/40 tag 15 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   55.034989] ata1.00: status: { DRDY ERR }
[   55.034993] ata1.00: error: { UNC }
[   55.682135] ata1.00: exception Emask 0x0 SAct 0x1002 SErr 0x40000 action 0x0
[   55.682140] ata1.00: irq_stat 0x40000008
[   55.682143] ata1: SError: { CommWake }
[   55.682146] ata1.00: failed command: READ FPDMA QUEUED
[   55.682151] ata1.00: cmd 60/08:08:68:d0:d0/00:00:00:00:00/40 tag 1 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   55.682154] ata1.00: status: { DRDY ERR }
[   55.682156] ata1.00: error: { UNC }
[   55.763166] ata1.00: exception Emask 0x0 SAct 0x2020 SErr 0x0 action 0x0
[   55.763170] ata1.00: irq_stat 0x40000008
[   55.763173] ata1.00: failed command: READ FPDMA QUEUED
[   55.763179] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   55.763182] ata1.00: status: { DRDY ERR }
[   55.763183] ata1.00: error: { UNC }
[   61.582245] ata1.00: exception Emask 0x0 SAct 0x10 SErr 0x40000 action 0x0
[   61.582255] ata1.00: irq_stat 0x40000008
[   61.582261] ata1: SError: { CommWake }
[   61.582268] ata1.00: failed command: READ FPDMA QUEUED
[   61.582282] ata1.00: cmd 60/08:20:68:d0:d0/00:00:00:00:00/40 tag 4 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   61.582288] ata1.00: status: { DRDY ERR }
[   61.582292] ata1.00: error: { UNC }
[   61.588820] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   61.665863] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x0
[   61.665870] ata1.00: irq_stat 0x40000008
[   61.665876] ata1.00: failed command: READ FPDMA QUEUED
[   61.665889] ata1.00: cmd 60/08:38:68:d0:d0/00:00:00:00:00/40 tag 7 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   61.665894] ata1.00: status: { DRDY ERR }
[   61.665898] ata1.00: error: { UNC }
[   61.672394] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   67.455388] ata1.00: exception Emask 0x0 SAct 0x40000000 SErr 0x40000 action 0x0
[   67.455398] ata1.00: irq_stat 0x40000008
[   67.455405] ata1: SError: { CommWake }
[   67.455412] ata1.00: failed command: READ FPDMA QUEUED
[   67.455425] ata1.00: cmd 60/08:f0:68:d0:d0/00:00:00:00:00/40 tag 30 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   67.455430] ata1.00: status: { DRDY ERR }
[   67.455434] ata1.00: error: { UNC }
[   67.461985] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   67.539213] ata1.00: exception Emask 0x0 SAct 0x60 SErr 0x0 action 0x0
[   67.539219] ata1.00: irq_stat 0x40000008
[   67.539225] ata1.00: failed command: READ FPDMA QUEUED
[   67.539238] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   67.539243] ata1.00: status: { DRDY ERR }
[   67.539247] ata1.00: error: { UNC }
[   67.545673] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   73.322807] ata1.00: exception Emask 0x0 SAct 0x100000 SErr 0x40000 action 0x0
[   73.322816] ata1.00: irq_stat 0x40000008
[   73.322822] ata1: SError: { CommWake }
[   73.322829] ata1.00: failed command: READ FPDMA QUEUED
[   73.322843] ata1.00: cmd 60/08:a0:68:d0:d0/00:00:00:00:00/40 tag 20 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   73.322848] ata1.00: status: { DRDY ERR }
[   73.322852] ata1.00: error: { UNC }
[   73.329403] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   73.410707] ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x0
[   73.410714] ata1.00: irq_stat 0x40000008
[   73.410720] ata1.00: failed command: READ FPDMA QUEUED
[   73.410733] ata1.00: cmd 60/08:28:68:d0:d0/00:00:00:00:00/40 tag 5 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   73.410738] ata1.00: status: { DRDY ERR }
[   73.410743] ata1.00: error: { UNC }
[   73.417179] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   79.198003] ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x40000 action 0x0
[   79.198013] ata1.00: irq_stat 0x40000008
[   79.198019] ata1: SError: { CommWake }
[   79.198026] ata1.00: failed command: READ FPDMA QUEUED
[   79.198039] ata1.00: cmd 60/08:88:68:d0:d0/00:00:00:00:00/40 tag 17 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   79.198045] ata1.00: status: { DRDY ERR }
[   79.198049] ata1.00: error: { UNC }
[   79.204579] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[   79.281894] ata1.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x0
[   79.281901] ata1.00: irq_stat 0x40000008
[   79.281907] ata1.00: failed command: READ FPDMA QUEUED
[   79.281920] ata1.00: cmd 60/08:e0:68:d0:d0/00:00:00:00:00/40 tag 28 ncq dma 4096 in
                        res 41/40:00:68:d0:d0/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[   79.281926] ata1.00: status: { DRDY ERR }
[   79.281930] ata1.00: error: { UNC }
[   79.288479] blk_update_request: I/O error, dev sda, sector 13684840 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Le PC est inutilisable.
J'envisage d'installer la Linux MINT 21.1
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Berni18
Messages : 39
Enregistré le : dim. 5 juil. 2020 11:18

Re: Dysfonctionnement du PC sous Linux Mint 20.3 sous xfce

Message par Berni18 »

Installation de Linux Mint 21.1
Plus aucun souci.
dmesg --level err n'affiche rien
Tout fonctionne maintenant correctement.
Merci pour votre aide.
Pc1 : MSI GP72 6QE leopard pro | Linux Mint 21.1 | Xfce | 5.15.0-xx-generic x86_64 | Intel Core i7-6700HQ | 24 GiB | NVIDIA GM107M [GeForce GTX 950M]
Pc2 : SAMSUNG Notebook NP400B5B | Linux Mint 21.1 | Xfce | 5.4.0-137-generic x86_64 | Intel Celeron CPU B840 bits: 64 | 8 GiB | Intel core processor
Haut
Répondre

Retourner vers « Assistance technique générale (hors autres rubriques) »